Report on Environmental Impact Substances Contained in Parts and Materials (ver.6.1)

Transcription

1 To: SHARP Corporation Date: Company Name: Department: Report on Environmental Impact Substances Contained in Parts and Materials (ver.6.1) We guarantee the following verified results on the environmental impact substance. (Note) In case of changing the description of this report, send promptly the revised report to Sharp. Information on surveyed part 1) Part Name ) Sharp Part Code ) Manufacturer's Part Code 4) Part (Material) Weight [g] A. RoHS-related A1. Presence of banned substances in the part (material) *) On EU Directive on Packaging etc., for packaging part and packaging material, the total concentration of these four heavy metals in part/material, ink and paint which constitute a package is100ppm or less each. Note) When "Not Applicable" is selected on the, the part or material is prohibited by the SHARP standard. *) On EU Directive on Packaging etc., for packaging part and packaging material, the total concentration of these 4 heavy metals in part/material, ink and paint which constitute a package is100ppm or less each. When "Not Applicable" is selected on the, please complete the A-Accompanying Table's items which details use of each substance. A-Accompanying Table Regarding items whose confirmatory result are "Not Applicable" in clause A, "X" are entered in the result column as the result of the confirmation pursuant to the criteria. No. No. Substances 1 Check point (Criteria) Check point (Criteria) *1) RoHS Exemption *1) A. Presence of banned substances depending on application No. Substances Check point (Criteria) *1) 1 Cadmium and its compound *) Content is 100ppm or less. Hexavalent chromium compound *) Polybrominated biphenyls (PBBs) Polybrominated diphenyl ethers (PBDEs) Lead and its compound *) Mercury and its compound *) Content in plastics is 00ppm or less. Content in others is 1000ppm or less. However, in case of use in toy/products for children, answer related criteria in A-Accompanying Table. 1 Cadmium and its compound (1) Used in every application other than the following -(5). - Used for electrical contacts. 8(b) () Used in filter glass. 1(b) (4) Used in colour converting II-VI LEDs (< 10 μg Cd per mm of light-emitting area) for use in solid state illumination or display systems. [Expires on 1 July 014] 9 (5) Battery is compliant with the EU Battery Directive (006/66/EC). - Lead and its compound (1) Used in products for children 1 and under, containing lead exceeding 0.01wt% per surveying unit. - Used in parts/material used in toys, containing lead above 0.009% per surface treatment - layer such as coating. () Used in every application other than the following (4)-(15). - < Continued on the next page.> RoHS-related - 1/5 - Ver 6.1 (revised on May, 01)

2 < Continued from the previous page.> RoHS No. Check point (Criteria) Exemption *1) Lead and its compound (continued) (4) Used in high-melting point solder (lead-based alloys containing 85 % by weight or more lead). 7(a) (5) Used in electrical and electronic components in a glass or ceramic other than dielectric ceramic 7(c)-I in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound. (6) Used less than 0.% by weight in glass of a fluorescent tube. 5(a), 5(b) (7) Contained in alloy component (Lead content should be less than 0.5 wt%, 0.4 wt% and 4wt% in steel material, aluminum material and copper material, respectively). 6(a), 6(b), 6(c) (8) Used in solder for connecting semiconductor dies and carriers in flip chip IC packages. 15 (9) Used in white glass or filter glass used for an optical purpose. 1(a) (10) Used in shell (exterior casing) or bushing (a cylindrical component fitted inside a hole) of a 9(b) bearing for a compressor containing coolant for heating, ventilation, air-conditioning, refrigeration, chilling, and HVACR. (11) Used in dielectric ceramic used in a capacitor with rated voltage of 15V AC or 50V DC or larger. 7(c)-II (1) Used in glass used for flat fluorescent lamps used for LCD, designing, or lighting for industrial purpose. 1 (1) Used in PTZ-based dielectric ceramic materials in a capacitor part of an IC chip or a discrete 7(c)-IV semiconductor. (single function semiconductor) (14) Battery is compliant with the EU Battery Directive (006/66/EC). - (15) Used for stabilizer or additive for non-electrolytic gold or nickel plating. (Lead content should be 0.1wt% or less in a coating of plating) - Mercury and its compound (1) Used in every application other than the following -(1). - Used in single-capped fluorescent lamp under the following conditions: (per burner): (a) For general illumination less than 0W: under.5mg 1(a) (b) For general illumination of 0W or higher and less than 50W: under.5 mg 1(b) (c) For general illumination of 50W or higher and less than 150W: under 5 mg 1(c) (d) For general illumination of 150W or higher: under 15mg (e) Having a circular or square structure, 17mm or less in tube diameter, and for general 1(d) 1(e) illumination: under 7mg (f) For a specific use: under 5 mg 1(f) () Used in double-capped strip fluorescent lamp for general purposes under the following conditions: (per lamp): (a) A three-wavelength phosphor of less than 9mm in tube diameter (e.g., T) with normal lifetime: under 4mg (a)(1) (b) A three-wavelength phosphor of 9mm or larger and of 17mm or less in tube diameter (e.g., T5) with normal lifetime: under mg (a) (c) A three-wavelength phosphor of over 17mm and 8mm or less in tube diameter (e.g., T8) with normal lifetime: under.5mg (a)() (d) A three-wavelength phosphor of over 8mm in tube diameter (e.g., T1) with normal (a)(4) lifetime: under.5mg (e) A three-wavelength phosphor with long lifetime (> 5,000 h) : under 5mg (a)(5) (4) Used in double-capped fluorescent lamp (in each individual lamp) not for general purposes under the following conditions: (a) Nonlinear white lamps of all shapes: under 15mg [Exprires on 1 April 016] (b) (b) A nonlinear three-wavelength phosphor lamp of 17mm or larger (e.g., T9): under15mg (b)() (c) A lamp for any other general illumination or specific purposes (e.g., induction lamps): (b)(4) under 15mg (5) Used in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes (per lamp): (a) Short length ( 500 mm): under.5mg (a) (b) Medium length (> 500 mm and 1500 mm): under 5mg (b) (c) (c) Long length (> 1500 mm): under 1mg (c) (6) Used in low pressure discharge lamps (per lamp) other than the above-(5): under 15mg 4(a) (7) Used in High Pressure Sodium (vapour) lamps for general lighting purposes (per burner) in lamps with improved colour rendering index Ra > 60: (a) P(lamp power) 155 W: under 0mg 4(b)-I (b) 155W < P 405W : under 40mg 4(b)-II (c) (c) P > 405W: under 40mg 4(b)-III (8) Used in other High Pressure Sodium (vapour) lamps for general lighting purposes (per burner): (a) P(lamp power) 155 W: under 5mg 4(c)-I (b) 155W < P 405W : under 0mg 4(c)-II (c) (c) P > 405W : under 40mg 4(c)-III (9) Used in high-pressure mercury vapor lamp (HPMV) [Expires on 1 April 015] 4(d) (10) Used in metal halide lamps (MH). 4(e) (11) Used in other discharge lamps for special purposes not specifically mentioned the above. 4(f) (1) Battery is compliant with the EU Battery Directive (006/66/EC). - *1) The number of this column is that of an exempted application of EU RoHS directive (011/65/EU) RoHS-related - /5 - Ver 6.1 (revised on May, 01)

3 B. Others B1. Ozone-depleting substances contained in the part or used in manufacturing No. Substances Check point (Criteria) *) 1 Ozone-depleting substances Not contained in part/materials. [regulated by the Montreal Protocol However, use of the refrigerant (HCFC) for air-conditioners is considered (Class I and II)] *1) as object exclusion. Not used in the rinse process. (Object: PWBs ) <Used / Not Used> (Even if "Not used" is selected, that means you didn't use these Rinse solution: substances to rinse process, describe rinse solution and method of the rinse process.) Rinse method: *1) Regarding Ozone-depleting substances, scoped substances are CFC, 1,1,1-trichloroethane, Carbon tetrachloride, Bromochloromethane, Halon, HBFC and HCFC. *) Unit for calculating content rate is homogeneous material. Note) When "Not Applicable" and/or "Used" is selected on the, the part or material is prohibited by the SHARP standard. B. Presence of banned substances in the part (material) No. Substances Check point (Criteria) *) 1 Tributyl Tin Oxide (TBTO) Tri-substituted organostannic compounds Polychlorinated biphenyls (PCBs) and specific substitutes Polychlorinated naphthalene Asbestos 7 Polychlorinated Terphenyls (PCTs) Phenol,-(H-benzotriazol--yl) 8-4,6-bis(1,1-dimethylethyl) 9 Tris (-chloroethyl) phosphate Hexabromocyclododecane 10 (HBCDD) 11 Cobalt dichloride 1 Short chain chlorinated paraffin Dimethyl fumarate 1 Refractory Ceramic Fibers, Aluminosilicate 14 Refractory Ceramic Fibers, Zirconia Aluminosilicate 15 Fluorinated greenhouse gases (HFC, PFC, SF6) 16 Chlorinated flame retardants Not intentionally added (Only poly chlorinated naphthalene with three chlorines and more is subject to the regulation) (Only C:10-1 are subject to the regulation) Content is 50ppm or less. Content is 0.1ppm or less. (use of the refrigerant (HFC) for air-conditioners, fridgefreezers and clothes washers is considered as object exclusion) Others - /5 - V.6.1 (revised on May, 01)

4 B. Presence of banned substances depending on application 14 Nickel Boric acid Disodium tetraborate, anhydrous, Tetraboron disodium heptaoxide, hydrate Dibutyltin (DBT) compounds Dioctyltin (DOT) compounds No. Substances Check point (Criteria) *) 1 Beryllium and its compound Azo colorants Polyvinyl Chloride and its copolymer Phthalates Radioactive substances Perfluorooctane sulfonate (PFOSs) *) Formaldehyde Perchlorates Arsenic and its compound Content is 1000ppm or less. Not intentionally added, and Content in substance/preparation is 50ppm or less, Content of sub-product/article etc. except substance/ preparation is 1000ppm or less, Content of coating agent is 1μg/m or less. Wood component: atmospheric concentration is 0.1ppm or less (by the chamber method). Plastics/fibers: content is 75ppm or less. Not intentionally added (only battery is targeted by this survey) Content is 1000ppm or less by weight of tin in a material. Content is 1000ppm or less by weight of tin in a material. *) As for "Perfluorooctane sulfonate (PFOSs) and its salt", please refer to the Web Site of Ministry of Economy, Trade and Industry of Japan. URL: When "Not Applicable" is selected on the, please complete the B-Accompanying Table's items which details use of each substance. B-Accompanying Table Regarding items whose confirmatory result are "Not Applicable" in clause B, "X" are entered in the result column as the result of the confirmation pursuant to the criteria. No. Check point (Criteria) 1 Beryllium and its compound (1) Using Beryllium oxide. Used in the other than the following (). () Used in the exception items: (a) Alloy (b) Ceramics (c) Glass (d) Semiconductor Azo colorants (1) Used in a contact part with human body of a product (e.g.:electric carpet, earphone, strap and etc.) which is manufactured based on the premise that the product continuously contacts human body, and may produce carcinogenic amine over 0ppm when discomposed. Used in every application other than the above (1). (Used in a part which does not continuously contact with human body) Polyvinyl Chloride and its copolymer (1) Used in packaging material and packaging part for Sharp product. Used in the other than the above (1). 4 Phthalates (1) Bis(-ethylhexyl)phthalate:DEHP, Dibutyl phthalate: DBP, Bis(butylbenzyl) phthalate: BBP, Diisobutyl phthalate: DIBP, are used (over 1000ppm). Dinonyl phthalate:dinp, Diisodecyl phthalate:didp or Di-n-octyl phthalate:dnop is used in parts/materials that is used in products for children 1 and under (over 1000ppm). () Used other than the above (1)-. < Continued on the next page.> Others - 4/5 - V.6.1 (revised on May, 01)

5 < Continued from the previous page.> No. Check point (Criteria) 5 Radioactive substances (1) Used in the other than the following -(). Using "Thorium" in the magnetron of a microwave oven. () Using "Krypton 85" in the electric bulb for a LCD projector. 6 Perfluorooctane sulfonate (PFOSs) (1) Used in the other than the following -(4). Used in photoresists and antireflection coating for the photolithography process. () Used in photo coating used in printing plates, film, and documents. (4) Used in mist suppressants for hard chrome plating, and moistening agent used in equipment for plating. 7 Formaldehyde (1) Used in wooden parts. Used in a direct human body contact part of a product which is intended to continuously contact with human body. (e.g.: electric carpet, earphone, strap and etc.) () Used in the other than the above (1)-. 8 Nickel (1) Used in parts which continuously contact with human skin for a long time. Used in the other than the above (1). 9 Perchlorates (1) Contained above 6ppb by weight per battery. (Necessary to caution on operation manual) Contained less than 6ppb by weight per battery. 10 Arsenic and its compound (1) Using Diarsenic Pentoxide Used in the other than the following ()-(4). () Used in the lamp of LCD projector. (Diarsenic trioxide) (4) Used for the exception items. (a) Semiconductor (b) Resist (c) Magnet filter (d) Copper foil (e) Battery 11 Boric acid (1) Used in the other than the following. Used for applications below; (a) Polarizers (made of PVA) (b) Glass (c) Adhensive agent 1 Disodium tetraborate, anhydrous, Tetraboron disodium heptaoxide, hydrate (1) Used in the other than the following. Used for applications below; (a) Polarizers (made of PVA) (b) Glass (c) Adhensive agent (d) Fiber 1 Dibutyltin (DBT) compounds (1) Used in the other than the following -(4). Used for one-component and two-component room temperature vulcanisation sealants (RTV-1 and RTV- sealants) and adhesives. () Used for paints and coatings containing DBT compounds as catalysts when applied on articles. (4) Used in stabilizer of soft polyvinyl chloride (PVC) for outdoor purpose. 14 Dioctyltin (DOT) compounds (1) Used for two-component room temperature vulcanisation moulding kits (RTV- moulding kits). Used in the other than the above (1). Approved by: Written by: Signature: Signature: Others - 5/5 - V.6.1 (revised on May, 01)