THE NEW DNA OF HIGH-STRENGTH GLASS CERAMICS.

Transcription

1 THE NEW DNA OF HIGH-STRENGTH GLASS CERAMICS.

2 The New DNA of High Strength Glass Ceramics Beauty. Strength. Speed. DENTSPLY presents a new class of high-strength glass ceramic materials with zirconia-reinforced lithium silicate ZLS. The outstanding chemical properties of ZLS provide a unique microstructure, allowing for exquisite Beauty, Strength and Speed. Like a graceful, yet powerful steed, Celtra delivers exceptional performance, including optimized balance of translucency, fluorescence and opalescence, reduced crystal size which serves to increase flexural strength, and a fine microstructure for processing speed efficiencies. Expand Services with no extra investment! Use the same furnaces with Celtra as with conventional C&B porcelain and the same milling units as with allceramics, including Sirona inlab MC XL Conceptually, like triple-stranded DNA, CELTRA embodies unique properties, tied to its threefold functional zirconia-reinforced lithium silicate microstructure. 1...Beauty 2... Strength 3... Speed Microstructure Comparison Increased glass content visibly improves translucency and facilitates in-depth opalescence and fluorescence. 10% dissolved zirconia reinforces the glass matrix without clouding it, and yields very high flexural strength properties. The ultra fine microstructure of the glass ceramic crystals (<1 µm) allows for easy, fast processing of the ZLS material, which can be milled and finished in its final, crystallized, tooth-colored state. As seen in this example, the fine microstructure of Celtra allows for translucency while providing strength to the restoration. Opalescence Load at fracture, anterior crowns Easy processing ZLS LS 2 MEDIAN LOAD AT FRACTURE [N] CELTRA e.max* Vita Mark II* Thermocycling (6.5 C-60 C), 10,000 cycles, followed by 1.2 million chewing cycles at an average load of 70N. Source: S. Rues, D. Müller, M. Schmitter, University of Heidelberg 2012, data available upon request. *e.max and Vita Mark II are not trademarks of DENTSPLY International, Inc. Glass with completely dissolved zirconia Lithium silicate crystals, nm Glass Lithium disilicate crystals, nm inlab is a trademark of Sirona Dental, Inc. ZLS prosthetics.dentsply.com

3 One Block - Two Strength Options Option 1 - Strength & Speed Option 2 - Strength Milling Glazing Seating Polishing ZLS flexural strength (370 MPa) exceeds that of Lithium Disilicate (360 MPa) and is achieved in significantly less time! Post-mill, the pre-crystallized, correctly shaded, CELTRA Duo block undergoes a short glaze firing cycle. SAME STRENGTH AS LITHIUM DISILICATE - IN LESS TIME*. *Stains and Glaze are applied onto a tooth-colored restoration SIGNIFICANTLY STRONGER THAN GLASS CERAMICS IN THE SAME TIME. Molar crown, block size C14, standard milling program Molar crown, block size C14, standard milling program CELTRA DUO CELTRA DUO MPa MIN MIN 14:30 13:00 27:30 MIN 13:30 24:20 13:00 50:50 MIN 370 MPa CELtra DUO glass CERAMICS CELtra DUO MPa MIN MIN 14:30 MIN 13:00 min 210 MPa MPa 360 MPa glass CERAMICS MPa 120 MPa Grinding Crys Stain- & Glaze firing Milling Data on File prosthetics.dentsply.com

4 FEATURES & BENEFITS ORDERING INFORMATION Product Patterson Part Number Product Patterson Part Number CELTRA TM Duo Blocks CELTRA TM Universal Stains CELTRA Duo LT A1 C CELTRA UNIVERSAL GLAZE 5G JAR LF FEATURES The new DNA of high-strength glass ceramics Zirconia-reinforce lithium silicate microstructure for optimized balance of translucency and opalescence Choice of flexural strength: 370 MPa 210 MPa BENEFITS High-strength, high esthetics and high speed allceramic alternative Beautiful esthetics Strength and Speed - select the best option for the case requirements: Greater than Lithium disilicate in less time 75% higher strength than leucite glass ceramics achieved in the same time CELTRA Duo LT A2 C CELTRA Duo LT A3 C CELTRA Duo LT A3.5 C CELTRA Duo LT B2 C CELTRA Duo HT A1 C CELTRA Duo HT A2 C CELTRA Duo HT A3 C CELTRA UNIVERSAL STAIN 5G LF STAIN CELTRA UNIVERSAL STAIN 5G LF STAIN CELTRA UNIVERSAL STAIN 5G LF STAIN CELTRA UNIVERSAL STAIN 5G LF STAIN CELTRA UNIVERSAL STAIN 5G LF STAIN CELTRA UNIVERSAL STAIN 5G LF STAIN i CELTRA UNIVERSAL STAIN 5G LF STAIN i CELTRA UNIVERSAL STAIN 5G LF WHITE CELTRA UNIVERSAL STAIN 5G LF CREME CELTRA UNIVERSAL STAIN 5G LF SUNSET CELTRA UNIVERSAL STAIN 5G LF COPPER Correctly shaded restoration post-milling. No crystallization step required. Speed of glass ceramics with the strength of Saves time and reduces remakes Processing efficiencies CELTRA UNIVERSAL STAIN 5G LF KHAKI CELTRA UNIVERSAL STAIN 5G LF OLIVE CELTRA UNIVERSAL STAIN 5G LF VIOLET Use the same furnaces with Celtra as with conventional C&B porcelain and the same milling units as with all-ceramics, including Sirona inlab MC XL Body and enamel stains available Indicated for single-unit anterior and posterior crowns, single-tooth implant superstructures, as well as inlays, onlays and veneers No extra capital investment required Customizable esthetics Wide range of indications CELTRA UNIVERSAL STAIN 5G LF MAHOGANY CELTRA UNIVERSAL STAIN & GLAZE LIQUID 15 ML CELTRA UNIVERSAL STAIN & GLAZE LIQUID 50 ML CELTRA Universal stain & glaze system Use Celtra with most Ceramco porcelains,* and for zirconia and restorations *Not compatible with Ceramco PFZ. Data on File. For more information or to place your order, contact your Patterson representative, local branch or call prosthetics.dentsply.com

5 DENTSPLY International, Inc. is a multinational healthcare corporation with operations around the globe and a rich history of excellence. For over a century, DENTSPLY has been committed to providing the dental community with innovative, high-quality, cost-effective dental products For Better Dentistry. From humble beginnings in 1899, the Company has grown to become one of the largest professional dental product manufacturers in the world. Click here for videos. DENTSPLY International DENTSPLY Prosthetics 570 West College Avenue York, Pennsylvania prosthetics.dentsply.com 2013 DENTSPLY International, Inc. All rights reserved Rev.6 (04/14)