Fittings. Elbow Pipe. Specifications:

Transcription

1 Elbow Pipe This type of fitting is widely used in piping systems to connect two straight sections of pipes of equal or different nominal diameter and with a curvature at a certain angle to change its direction; Elbow pipes are made of various materials such as steel alloys, carbon steel, stainless steel, etc. Specifications: - Seamless Elbow: 1/2 to 36 - Weld Elbow: 4 to 78 Wall thickness: - Sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, XXS, - Maximum wall thickness: 200 mm - ASTM - ASME - JIS - SGP - DIN - BS - GOST - IN Radius of curvature: 1D to 10D Angle: 0 to Alloys: ASTM / ASME A234, WP 11-WP 22 - Stainless Steel: ASTM / ASME A403 WP L - ASTM / ASME A403 WP L - ASTM / ASME A403 WP Low Temperature Steel: ASTM / ASME A402 WPL 3-WPL 6 - High performance steel: ASTM / ASME A860 WPHY T-tube joint A T-joint is used to combine or divide the flow of two generally independent pipe sections of the same diameter. However, with the incorporation of a reducer it is possible to connect pipe sections of different diameter. It is made of carbon steel, steel alloys and stainless steel, to meet your application needs. - Seamless: 1/2 to 24 - With welding: 4 to 78

2 Wall Thickness - Sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, - Maximum wall thickness: 150 mm - ASME, JIS, DIN, BS, GOST, EN Use - Any application - Alloys: ASTM / ASME A234, WP 11-WP 22 - Stainless Steel: ASTM / ASME A403 WP L - ASTM / ASME A403 WP L - ASTM / ASME A403 WP way connection The 4-way connector is a fitting with three inputs and one output or one input and three outputs. It can be classified in straight joining and joining with reduction. The straight joint is used to join pipes of the same diameter and the union with reduction is suitable for pipes with different diameter. - Seamless: 1/2 to 36 - With welding: 4 to 78 Wall thickness - Sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, - Maximum tube thickness: 150 mm - ASME B ASME B ASME B Carbon Steel: ASTM / ASME A234 WPB-WPC - Alloys: ASTM / ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP Stainless Steel: ASTM / ASME A403 WP L-304H-304LN-304N - ASTM / ASME A403 WP L-316H-316LN-316N-316Ti - ASTM / ASME A403 WP H ASTM / ASME A403 WP H - Low Temperature Steel: ASTM / ASME A402 WPL 3-WPL 6 - High performance steel: ASTM / ASME A860 WPHY Pipe Reducer It is an accessory designed to join two pipes with different internal diameter. There are two types of reducers: concentric reducers and eccentric reducers.

3 Pipe plug - Seamless: 1/2 to 24 - With welding: 4 to 78 - ASTM, ASME, JIS, SGP, DIN, BS, GOST, EN - Alloys: ASTM / ASME A234, WP 11-WP 22 - Stainless Steel: ASTM / ASME A403 WP L - ASTM / ASME A403 WP L - ASTM / ASME A403 WP 321 A plug is an industrial pipe fitting used to protect the ends of the pipes. They are hermetic to fulfill its purpose of waterproofing the connections. In addition, the pipe plug can also be used to close the ends of the pipes. - 1/2 to 78 Tube wall thickness - Sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, - Maximum wall thickness: 150mm - ASTM - ASME - JIS - SGP - DIN - BS - GOST - IN Manufacturing process - Torsion, extrusion, compression molding, machining, etc. - Alloys: ASTM / ASME A234, WP 11-WP 22 - Stainless Steel: ASTM / ASME A403 WP L - ASTM / ASME A403 WP L - ASTM / ASME A403 WP 321

4 Pipe bend A curve is a type of pipe fitting designed for oil, gas or liquid transport applications. - Seamless: 1/2 to 36 - With welding 6 to 60 Wall thickness - Sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, - Maximum wall thickness: 200 mm Radius of curvature: 3D to 10 D Angle: 0 to Alloys: ASTM / ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP Stainless Steel: ASTM / ASME A403 WP L-304H-304LN-304N - ASTM / ASME A403 WP L-316H-316LN-316N-316Ti - ASTM / ASME A403 WP H ASTM / ASME A403 WP H - Low Temperature Steel: ASTM / ASME A402 WPL 3-WPL 6 - High performance steel: ASTM / ASME A860 WPHY ASME B ASME B SY / T DL / T GD2000 GD Welding elbow to neck or lace It is a welding accessory without thread, but with great laces in both ends to allow the connection of pipes. - 1/8 to PSI, 600PSI, 900PSI - B / T SH / T (DN = 10-80mm SCH80, SCH160) HG / T ASME B BS JIS B Manufacturing process - Forging, machining - Stainless steel: A H-304L-304N-304LN H-316L-316N-316LN

5 Weld T weld to neck or lace The T welding collar is to be used in high pressure pipes. - 1/8 to PSI, 6000PSI, 9000PSI - ASME B BS JIS B Process - Forging, machining - Stainless steel: A H-304L-304N-304LN H-316L-316N-316LN Slip-On Flanges In this type of flanges slip over the pipe. The inside diameter is slightly bigger than the pipe s outside diameter. These attachments are connected at the top and bottom of the flange. Kind - Welded flange ASME B16.5 and ASME B /8 to 40 - American standard series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS European standards series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400 Types of flange faces - American Series: Flat Face (FF), Raced Face (RF), Ring Type Joint (RTJ), Male and Female Face (MFM), Tongue-and-Groove (T&G) - Stainless steel: A H-304L-304N-304LN H-316L-316N-316LN - GB / T GB / T GB / T GB / T GB / T GB / T SH / T

6 - GD2000 GD HG / T HG / T HG / T HG / T HG / T ASME B EN EN BS BS AFNOR NF E ISO AS JIS B Welding Neck Flanges These flanges have a long conical neck, their end is butt welded with the corresponding pipe. The inside diameter of the pipe is the same as that of the flange, this feature provides a smooth and almost constant flow, without possibilities to produce turbulence in the gases or liquids that circulate. The long neck and the smooth transition of the thickness of the same, give this type of flanges, the strength needed in sections of pipes exposed to bending stresses from the expansions in the pipe line. They are suitable to be used in severe work, where high pressures act. Type - Flange with welded collar ASME B16.5 and ASME B Flange with welded collar ASME B16.47, DIN 2631, DIN 2637, DIN 2632, DIN 2638 and DIN /8 to American standard series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS European standards series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400 Types of flange faces - Flat Face (FF), Raced Face (RF), Ring Type Joint (RTJ), Male and Female Face (MFM), Tongue-and-Groove (T&G) - Stainless steel: A H-304L-304N-304LN H-316L-316N-316LN - GB / T GB / T GB / T GB / T GB / T GB / T SH / T GD2000 GD

7 Plate flange - HG / T HG / T HG / T HG / T HG / T ASME B EN EN BS BS AFNOR NF E ISO / AS JIS B A Plate Flange is a flat and circular disc with several holes around the perimeter that serve to join different elements. Type - ASME B16.5 and ASME B /8 to American standard series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS European standards series: PN 2.5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63, PN 100, PN 160, PN 250, PN 320, PN 400 Types of flange faces - American Series: Flat Face (FF), Raced Face (RF), Ring Type Joint (RTJ), Male and Female Face (MFM), Tongue-and-Groove (T&G) - GB / T GB / T GB / T GB / T GB / T GB / T SH / T GD2000 GD HG / T HG / T HG / T HG / T HG / T ASME B EN EN BS BS AFNOR NF E ISO AS JIS B

8 - Stainless steel: A H-304L-304N-304LN H-316L-316N-316LN Blind flanges Fittings They are intended to close pipe ends, valves or container openings, exposed to various working pressures.from the technical point of view, this type of flanges is the one that supports more severe working conditions (particularly the larger ones). Type - Blind flange ASME B16.5 and ASME B /8 to American standard series: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900, CLASS 1500, CLASS 2500 Types of flange faces - American Series: Flat Face (FF), Raced Face (RF), Ring Type Joint (RTJ), Male and Female Face (MFM), Tongue-and-Groove (T&G) - GB / T GB / T GB / T GB / T GB / T GB / T SH / T GD2000 GD HG / T HG / T HG / T HG / T HG / T ASME B EN EN BS BS AFNOR NF E ISO AS JIS B Stainless steel: A H-304L-304N-304LN H-316L-316N-316LN H H