/ 3/ 4/ SRS eneration 3-Way eatures Three-way (3/) eneration solenoid valves have three ports and two orifices. When one orifice is open, the other is

Transcription

1 N X T N R A T O N lectronically nhanced Solenoid Valves rass and Stainless Steel odies 1/4" - " NPT / 3/ 4/ SRS eneration eatures ncrease in pressure ratings to A levels on all products (up to a 500% improvement) Lower power operation Voltage ranging uilt-in surge suppression limination of A hum ncrease in A and operating temperatures Low solenoid temperature rise Longer coil life due to lower operating temperatures and electrical surge suppression Solenoid approvals to UL, SA, and directives Available with lass, ivision coils ( prefix) RoS ompliant Nominal Ambient Temp. Ranges 14 to 140 (-10 to 60 ) or 86/863/8314 Series: -13 to 140 (-5 to 60 ) ow to order ind the valve that you are looking for in the provided specifications tables. The tables contain the following information designed to help you in making your selection: Pipe Size Orifice ia. v low Min. ^ ) Operating Pressure ifferential (psi) Max. Agency Air-nert as Water Light 300 SSU Max luid Temp. rass Ref. UL Stainless Steel Ref. UL A/ Agency Wattage Approx. Shipping Weight (lbs.) 1/ 5/ P094 4 m When ordering a valve product, specify the ASO base catalog number (x. 810P094). This number will always be 8 digits long. hoose one of the three operating voltage ranges (100-40V/50-60z/, 4-10V/50-60z/ or 1-4/) and add it to the base catalog number (x. 810P V/50-60z/). f you want to enhance the product with one or more of the options allowed in the Optional eatures hart for that catalog number, please add the appropriate prefix or suffix (as shown): LTRONALLY NAN Pipe Size Orifice ia. Solenoid Options ase atalog Number Resilient Materials Other Standard Rebuild Kit lass, ivision oil rass Stainless Steel NR KM 1/ 5/8 810P094 - l V J N - - V MO M Optional lass, ivision solenoid (x. 810P V/50-60z/) f an KM elastomer and manual operator are required, add VMO to the back of the base catalog number. (x. 810P094VMO 4-10V/50-60z/) When ordering a rebuild kit for a valve, supply the rebuild kit number as shown in the table. (x. 3670) When ordering a rebuild kit for a valve with a suffix, add the suffix to the appropriate standard rebuild kit. (x. The rebuild kit for the above valve with KM is 3670-V) All constructions are available with prefix for lass, ivision requirements. When ordering a replacement coil, select from the following: Voltage Range Valve Prefix Replacement oil Part Number Solenoid nclosures V/50-60z/ * Standard: Watertight, Types 1,, 3, 3S, 4, and 4X. 4-10V/50-60z/ * Optional: lass, ivision for azardous Locations and Watertight, 1-4/ * Types 3, 3S, 4, 4X. (To order, add prefix to catalog number.) V/50-60z/ * Note 4-10V/50-60z/ * See ngineering Section for valve parts in contact with fluids 1-4/青岛秉诚自动化设备有限公司 * 服务热线 : 传真 :(86-53) and additional information. PM R Oxygen Service PT Urethane Vacuum Manual Operator Mounting racket rass Stainless Steel 105

2 / 3/ 4/ SRS eneration 3-Way eatures Three-way (3/) eneration solenoid valves have three ports and two orifices. When one orifice is open, the other is closed ontrol of air, water, light oil, and other non-corrosive media Normally closed (pressure to cylinder port when energized) operation Normally open (cylinder port exhausts when energized) operation Universal operation (can function as normally open, normally closed, diverter of fluid flow, or selector of fluid sources configurable by piping) Pipe sizes 1/4 to 3/4 inch 3-Way Specifications (nglish units) Pipe Size Orifice ia. Operating Pressure ifferential (psi) Max. Max. Agency Agency Wattage Approx. Light 300 SSU luid Temp. rass Ref. UL Stainless Steel Ref. UL Shipping A/ Weight (lbs.) v low Min. Air-nert as Water eneral Service - Normally losed 1/8 3/ R031 1 l 8314R037 1 l 1.7 1/8 3/ R03 1 l 8314R038 1 l 1.7 1/8 1/ R033 1 l 8314R039 1 l 1.7 1/4 3/ R034 l 8314R068 l 1.8 1/4 3/ R035 l 8314R11 l 1.8 1/4 1/ R036 l 8314R16 l 1.8 1/4 5/ R130 l 8314R30 l 1.8 1/4 7/ R131 l 8314R31 l 1.8 1/4 9/ R13 l 8314R3 l /4 5/ P18 3 l /4 7/ P184 3 l /4 5/ P186 3 l /4 3/ ƒ P035 4 l /4 9/ P001 5 l /8 9/ P00 5 l /8 5/ P054 6 l / 5/ P064 6 l /4 11/ P074 7 l NAMUR Mount - 3/ Normally losed 1/4 3/ P704 9 l 830P714 9 l eneral Service - Normally Open 1/8 3/ R049 1 l 8314R055 1 l 1.7 1/8 3/ R050 1 l 8314R056 1 l 1.7 1/8 1/ R051 1 l 8314R057 1 l 1.7 1/4 3/ R05 l 8314R069 l 1.8 1/4 3/ R053 l 8314R1 l 1.8 1/4 1/ R054 l 8314R070 l /4 5/ R133 l 8314R33 l 1.8 1/4 7/ R134 l 8314R34 l 1.8 1/4 9/ R135 l 8314R35 l 1.8 1/8 3/ P136 8 l 830P146 8 l.5 1/4 1/ P190 3 l /4 5/ P19 3 l /4 7/ P194 3 l eneral Service - Universal Operation 1/8 3/ R041 1 l 8314R04 1 l 1.7 1/8 3/ R043 1 l 8314R044 1 l 1.7 1/8 1/ R045 1 l 8314R040 1 l 1.7 1/4 3/ R006 l 8314R13 l 1.8 1/4 3/ R007 l 8314R10 l 1.8 1/4 1/ R008 l 8314R14 l /4 5/ R17 l 8314R7 l 1.8 1/4 7/ R18 l 8314R8 l 1.8 1/4 9/ R19 l 8314R9 l 1.8 1/4 5/ P17 3 l /4 7/ P174 3 l /4 5/ P176 3 l l = eneral Purpose Valve. 1/4" exhaust orifice with 0.73 v flow; 11/3" exhaust orifice with 1.0 v flow; 3/64" exhaust orifice with 0.06 v flow. 3/3" exhaust orifice with 0.0 v flow. ƒ 10 psi minimum for light oils. Max. fluid temp. 180 for light 45 SSU. Pressure rating for light 45 SSU. 1-4V. 4-10V A/, V A/. 111 LTRONALLY NAN

3 / 3/ 4/ SRS eneration 4 3-Way Specifications (Metric units) LTRONALLY NAN Operating Pressure ifferential (bar) Pipe Orifice Kv low Max. Max. Agency Agency Wattage Size ia. (mm) actor (m 3 /h) Min. Air-nert as Water Light 300 SSU luid Temp. rass Ref. UL Stainless Steel Ref. UL A/ eneral Service - Normally losed 1/ R031 1 l 8314R037 1 l 1/ R03 1 l 8314R038 1 l / R033 1 l 8314R039 1 l / R034 l 8314R068 l / R035 l 8314R11 l / R036 l 8314R16 l / R130 l 8314R30 l / R131 l 8314R31 l /4 1/ R13 830P18 3 l l 8314R3 - - l / P184 3 l / P186 3 l / P035 4 l / P001 5 l / P00 5 l / P054 6 l / P064 6 l / P074 7 l NAMUR Mount - 3/ Normally losed 1/ P704 9 l 830P714 9 l 1.5 eneral Service - Normally Open 1/ R049 1 l 8314R055 1 l / R050 1 l 8314R056 1 l / R051 1 l 8314R057 1 l / R05 l 8314R069 l / R053 l 8314R1 l / R054 l 8314R070 l / R133 l 8314R33 l / R134 l 8314R34 l / R135 l 8314R35 l / P136 8 l 830P146 8 l 1.1 1/ P190 3 l / P19 l / P194 l eneral Service - Universal Operation 1/ R041 1 l 8314R04 1 l / R043 1 l 8314R044 1 l / R045 1 l 8314R040 1 l / R006 l 8314R13 l / R007 l 8314R10 l / R008 l 8314R14 l / R17 l 8314R7 l / R18 l 8314R8 l / R19 l 8314R9 l / P17 3 l / P174 3 l / P176 3 l l = eneral Purpose Valve. 6.3 mm exhaust orifice with 0.63 Kv flow; 8.7 mm exhaust orifice with 1.0 Kv flow; 1.3 mm exhaust orifice with 0.05 Kv flow..5 mm exhaust orifice with 0.17 Kv flow. ƒ 0.7 bar minimum for light oils. Max. fluid temp. 8 for light 45 SSU. Pressure rating for light 45 SSU. 1-4V. 4-10V A/, V A/. Approx. Shipping Weight (kgs.)

4 / 3/ 4/ SRS eneration 3-Way Optional eatures hart ase atalog Number Resilient Materials and Suffix Options Other Standard Rebuild Kit Pipe Size Orifice ia. rass Stainless Steel Silicone ree NR KM PM R 1/8 3/ R R037 S l V - - N MS M /8 3/ R R04 S l V - - N MS M /8 3/ R R055 S l V - - N MS M /8 3/3 8314R R038 S l V - - N MS M /8 3/3 8314R R044 S l V - - N MS M /8 3/3 8314R R056 S l V - - N MS M /8 1/8 8314R R039 S l V - - N MS M /8 1/8 8314R R040 S l V - - N MS M /8 1/8 8314R R057 S l V - - N MS M /8 7/16 830P P146 ƒ l V J N T - - MO/MS M /4 1/3 830P190 - ƒ l V J N T - - MO/MS M /4 3/ R R13 S l V - - N MS M /4 3/ R R068 S l V - - N MS M /4 3/ R R069 S l V - - N MS M /4 5/64 830P17 - ƒ l V J N T - - MO/MS M 371-1/4 5/64 830P18 - ƒ l V J N T - - MO/MS M 37-1/4 5/64 830P19 - ƒ l V J N T - - MO/MS M 373-1/4 3/3 8314R R10 S l V - - N MS M /4 3/3 8314R R11 S l V - - N MS M /4 3/3 8314R R1 S l V - - N MS M /4 3/3 8317P035 - ƒ l V - - N /4 3/3 830P P714 ƒ l V J N T - - MO/MS /4 7/64 830P174 - ƒ l V J N T - - MO/MS M 371-1/4 7/64 830P184 - ƒ l V J N T - - MO/MS M 37-1/4 7/64 830P194 - ƒ l V J N T - - MO/MS M 373-1/4 1/8 8314R R14 S l V - - N MS M /4 1/8 8314R R16 S l V - - N MS M /4 1/8 8314R R070 S l V - - N MS M /4 5/3 8314R R7 S l V - - N MS M /4 5/3 8314R R30 S l V - - N MS M /4 5/3 8314R R33 S l V - - N MS M /4 5/3 830P176 - ƒ l V J N T - - MO/MS M 371-1/4 5/3 830P186 - ƒ l V J N T - - MO/MS M 37-1/4 7/3 8314R R8 S l V - - N MS M /4 7/3 8314R R31 S l V - - N MS M /4 7/3 8314R R34 S l V - - N MS M /4 9/3 8314R R9 S l V - - N MS M /4 9/3 8314R R3 S l V - - N MS M /4 9/3 8314R R35 S l V - - N MS M /4 9/3 831P001 - ƒ l V MO/MS /8 9/3 831P00 - ƒ l V MO/MS /8 5/8 8316P054 - ƒ l V J N MO M / 5/8 8316P064 - ƒ l V J N MO M /4 11/ P074 - ƒ l V J N MO M l = Standard. Other options may be available. All option combinations may not be available. Please consult your local ASO contact. Pressure rating reduced by 5%. Upper disc is KM. Not available with PT resilient materials. Pressure rating limited to 100 psi (6.9 bar) for MO constructions. ƒ onsult factory. Oxygen Service PT Urethane Vacuum Manual Operator Mounting racket rass Stainless Steel LTRONALLY NAN 113

5 / 3/ 4/ SRS eneration 4 imensions: inches (mm) Ref. J 1 in mm /8 PP TRA 3 Ref.1, in mm ONUT 1/" NPT 3 in mm LTRONALLY NAN in mm in mm in mm in mm [7.6] MOUNTN MNSONS (1/8 PP SZ).59 [15] 1/4 PP TRA ( PLAS) M5 TRA.9 [7] MN.ULL TRA PT OLS OR MOUNTN.34 [9] MOUNTN MNSONS (1/4 PP SZ).87 [] M5 TRA.9 [7] MN.ULL TRA PT OLS OR MOUNTN 8 in mm [18].87 [] LOW LOW Ref. 3 Ref. 4 1/ NPT 1/ NPT MOUNTN OLS.31 [7.8] P OR.164 [4.1] TRA UTTN SRW J 1.50 [38] Ref [19] UN [11.1] P PLAS J 114

6 / 3/ 4/ SRS eneration imensions: inches (mm) Ref. 6 Ref. 7 1/ NPT 1/ NPT LTRONALLY NAN Ref. 8 Ref [94].91 [74] 1/ NPT 1/ NPT 3.04 [77] 3.98 [10] 4.30 [109] 1/8 NPT 3 PLAS [3] MOUNTN RAKT* WT Ø.8 [7] OLS PLAS 1.91 [49].95 [4] 1 1/4 ANPT 1.6 [3] 1.75 [44] 1.85 [47].7 [7] OR M5 SRWS, PLAS.8 [7] OR UN-A, & UN-A SRWS, PLAS.69 [68] 1/4 ANPT 3 Ø.0 x.15 P [Ø5.6] x [3.] P OR POSTONN OWL 115

7 ngineering nformation eneration lectronically nhanced Solenoids ( eneration) All Redat eneration solenoid valves are rated for continuous duty under the operating conditions outlined within this section. oil Operating Voltage Ranges All coils are designed for industrial operating voltages and can be used on the following voltage ranges: Voltage Range Minimum Voltage Maximum Voltage V/50 or 60z/ lectrical Specifications Watt lectronic oils Type Maximum Ambient Temperature 140 Maximum ycle Rate Standard oil lass of nsulation 1 Operation/ Second Power onsumption The eneration solenoid power rating is 1.0 watt of power for 1-4V and 1.5 watts for 4-10V A/, and V A/. 4-10V/50 or 60z/ / only The coils with voltage ranges of and 4-99 have three lead wires, 4 inches long ( red for power input, and one green lead for grounding where necessary). These two versions are not polarity sensitive. The coil with a voltage range of 1-4/ has 3 lead wires, one red, one black, and one green. This coil is polarity sensitive. The red lead is the positive, black is the negative, and green is the ground wire. This solenoid is also polarity protected. Reversing the polarity will not damage the coil, but the coil will not function until the correct polarity is applied. Note: The voltage range is also suitable for battery charging circuits designed around a 15/ nominal voltage range. Magnet wire - lass insulation Lead wire - UL and SA listed 600 volt leads, 6 strand, 18awg, P coated Overmold LP obbin-lp 485 NNRN

8 ngineering nformation 4 eneration The advanced technology used in the eneration coil includes electronic circuitry which may limit the compatibility with certain control system components. The following issues need to be considered when specifying an output card or device to operate the eneration coil. An initial inrush current spike is drawn by the eneration coil. This inrush spike is 7 msec in duration, which is sufficient time for the core to reach the plugnut. The electrical requirement then drops to the holding value. The eneration coil is suitable for systems using supervisory currents that do not exceed the drop-out currents noted in the table below. nrush urrent: The power source, wiring, and output device used need to have surge ratings equal to or greater than the inrush current value (appropriate to the voltage range) specified in the table below. Solenoid nclosures nrush urrent Rating oil Version Peak nrush urrent (Amps) 1-4/ /50-60z/ /50-60z/ 0.3 Maximum uration = 7 ms olding urrent: The power source, wiring, and output device used need to have continuous current ratings equal to or greater than the holding current value (appropriate to the voltage range) specified in the table below. Supervisory/Leakage urrent Rating oil Version rop-out urrent (ma) 1-4/ /50-60z/ /50-60z/ 7 mportant: Supervisory and leakage currents above the drop-out current listed with cause improper operation. onsult your local ASO Sales office for additional assistance. The eneration solenoid coil is fully encapsulated using upont Zenite Liquid rystal Polymer resin (LP). Zenite (LP) is a thermoplastic polyester resin which exhibits several advantages over other thermoplastics. The advantages include excellent resistance to a wide range of organic solvents and automotive fluids*, resistance to impact, and long term retention of properties at continuous-use temperatures. *hemical resistance of Zenite LP may not be suitable for all applications. Zenite LP is not suitable for caustic solution. Please consult ASO for appropriate product solutions. Zenite is a registered Trademark of upont o. olding urrent Rating oil Version 1-4/ 4-10/50-60z/ /5060z/ nput Voltage 1 Average olding urrent (Amps) 0.30 Average olding Volt-Amps (VA) Supervisory/Leakage urrents: The leakage current is defined as a current that is supplied from an output device when the device is in its off or de-activated state. NNRN 486 青岛秉诚自动化设备有限公司 地址 中国 青岛市重庆南路99号海尔云街甲3号楼7 Redat eneration Solenoids are available as: eneral Purpose/Watertight ntended for indoor and outdoor use and provides protection classifications from NMA Types 1 through 4X. lass, ivision for azardous Locations/Watertight Meets Types 1 through 4X and is UL listed and SA certified for lass, ivision, roups A,,, and and lass, ivision, roups and. Operating temperature code T4A (10 ). 服务热线 网址 传真 (86-53) mail sales@ivalve.cc

9 ngineering nformation eneration Valve Specifications Maximum Ambient Temperature The maximum ambient temperature is 140 (60 ). This limit is based on continuous energization with the maximum fluid temperatures as shown on each catalog page. Response Time Response time from fully closed to fully open or vice versa depends on valve size, operating mode, fluids, temperature, inlet pressure, and pressure drop. The response times for eneration are defined as: Small direct acting valves 10 to 60 msec Large direct acting valves 5 to 90 msec nternally pilot operated valves: - Small diaphragm types 0 to 100 msec - Large diaphragm types 80 to 150 msec - Small piston types 80 to 150 msec - Large piston types 105 to 00 msec Operation on liquids has relatively little effect on small direct acting valves, however, response times of large direct acting and internally piloted valves may be lengthened by 50% to 100%. Manual Operators Manual operators are provided to operate the valves manually when electric actuation is not provided. There are two basic types of manual operators, momentary and maintained. To determine which type of manual operator is available for your valves, please see the Optional eatures hart on the relevant valve catalog page. Once it is determined that the subject valve can accommodate a manual operator, the chart below will tell you the type of manual operator. The chart also references the relevant cutaway illustration. utaway llustrations Series Number Ref. Manual Operator Suffix Manual Operator Type llustration Number MO Maintained , 7, 10, 11, 1 MO Maintained 86 1 MS Maintained MS Maintained MS Maintained , 6 MO Maintained 830 MO Momentary MS Maintained MO Momentary MS Maintained , 3, 4 MO Maintained 8345青岛秉诚自动化设备有限公司 MO Maintained 5 服务热线 : 传真 :(86-53) NNRN

10 ngineering nformation eneration 4 Valve Parts in ontact with luids Series ody Seals and iscs isc older ore uide Springs Shading oil 8030 rass NR Stainless Steel opper Stainless Steel NR Stainless Steel Silver rass NR - 30 Stainless Steel opper Stainless Steel PT, NR Stainless Steel Silver rass NR, PA, PT Stainless Steel opper Stainless Steel NR Stainless Steel Silver 86P Stainless Steel UR Stainless Steel Silver 86R Stainless Steel UR Stainless Steel Silver 86R Stainless Steel UR Stainless Steel Silver 86R Stainless Steel UR - 30 Stainless Steel Silver 86R Stainless Steel UR Stainless Steel Silver 86 rass NR Stainless Steel opper 86R077 rass LT NR - - nconel opper 86R078 rass LT NR - POM nconel opper Stainless Steel NR Stainless Steel Silver 863 rass NR Stainless Steel opper Stainless Steel NR, KM - POM 30 Stainless Steel Silver 8314 rass NR, KM - POM 30 Stainless Steel opper 8316 rass NR POM POM 30, 17-7P Stainless Steels opper 8317 rass NR, KM, R - POM 30, 17-7P Stainless Steels opper Stainless Steel NR POM POM 30 Stainless Steel Silver 830 rass NR POM POM 30 Stainless Steel opper 831 rass NR POM POM 30 Stainless Steel opper 8344 rass NR POM POM 30, 17-7P Stainless Steels opper 8345 rass NR, PA - POM 30 Stainless Steel opper Stainless Steel NR, PA - POM 30 Stainless Steel opper 8551 Anodized Aluminum NR, PA - POM 30 Stainless Steel opper Note: All core tubes are 305 stainless steel and all cores and plugnuts are 430 stainless steel. 810P033, 810P034, and 810P035 with PA isc older NNRN 488