AlfaNova 14. Fusion plate heat exchanger

Transcription

1 AlfaNova 14 Fusion plate heat exchanger General information AlfaNova is a plate heat exchanger made of 100% stainless steel. It is based on Alfa Laval s new revolutionary technology, AlfaFusion, the art of joining stainless steel components together. AlfaNova heat exchangers are well suited in applications which put high demand on cleanliness, applications where ammonia is used or applications where copper or nickel contamination is not accepted. Its high resistance to corrosion makes it both hygienic and environmental friendly. It is extremely compact compared to its capacity to withstand great strains in demanding heat transfer applications. Applications Within refrigeration: - Oil cooler - Condenser - Economizer - Desuperheater - Absorption systems Other main applications: - Domestic hot water heater - Process cooling - Hydraulic oil cooling - Laser cooling - Hygienic/sanitary application - Water/water cooling & heating Working principles The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in countercurrent flow. The media are kept in the unit by a bonded seal around the edge of the plates. The contact points of the plates are also bonded to withstand the pressure of the media handled. Particulars required for quotation To enable Alfa Laval's representative to make a specific quotation, enquiries should be accompanied by the following particulars: flow rates or heat load required temperature program physical properties of liquids in question desired working pressure maximum permitted pressure drop Examples of connections Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer design. Outside Inside Soldering Welding

2 AlfaNova 14 PED approval pressure/temperature graph* Standard data 24 (348) 22 (319) 18 (261) 16 (232) bar / PSI S3 S4 S1 S2 Min. working temperature Max. working temperature Min. working pressure vacuum Max. working pressure Volume per channel, litres (ga) 0.02 (0.0053) Max particle size mm (inch) 1.2 (0.05) Max flowrate* m 3 /h (gpm) 4.5 (20) Min no of plates 4 Max no of plates (437) 250 () ºC (ºF) *) Water at 5 m/s (16.4 ft/s) (connection velocity) Standard materials AlfaNova 14 - UL approved pressure/temperature graph* PSI / bar S3 S4 S1 S2 Cover plates Connections Plates AlfaFusion filler 300 (20.7) 77 (3.03) 42 (1.65) A -319 (-195) 437 ºF (225) (ºC) S4 S1 * For exact values please contact your local Alfa Laval representative. Standard dimensions* 172 (6.77) 207 (8.15) A measure mm = 8 + (n x 2.35) + 3 A measure inch = (n x 0.093) Weight kg = (n x 0.046) Weight lb = (n x 0.10) (n = number of plates) S3 S2 PCT00033EN 0909 Alfa Laval reserves the right to change specifications without prior notification. How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at

3 AlfaNova 27 / AlfaNova HP 27 Fusion plate heat exchanger General information AlfaNova is a plate heat exchanger made of 100% stainless steel. It is based on Alfa Laval s new revolutionary technology, AlfaFusion, the art of joining stainless steel components together. AlfaNova heat exchangers are well suited in applications which put high demand on cleanliness, applications where ammonia is used or applications where copper or nickel contamination is not accepted. Its high resistance to corrosion makes it both hygienic and environmental friendly. It is extremely compact compared to its capacity to withstand great strains in demanding heat transfer applications. Applications Within refrigeration: - Oil cooler - Condenser - Evaporator - Economizer - Desuperheater - Absorption systems Other main applications: - Domestic hot water heater - Process cooling - Hydraulic oil cooling - Laser cooling - Hygienic/sanitary application - Water/water cooling & heating Working principles The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in countercurrent flow. The media are kept in the unit by a bonded seal around the edge of the plates. The contact points of the plates are also bonded to withstand the pressure of the media handled. Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer design. Particulars required for quotation To enable Alfa Laval's representative to make a specific quotation, enquiries should be accompanied by the following particulars: flow rates or heat load required temperature program physical properties of liquids in question desired working pressure maximum permitted pressure drop Examples of connections Outside Inside Soldering Welding

4 AlfaNova 27 PED approval pressure/temperature graph* AlfaNova 27 - ASME approval prerssure/temperature graph* PS bar / (PSI) 30 (435) 28 (406) 26 (377) 24 (348) 22 (319) 18 (216) 16 (232) 14 (203) (H) (H) (L) PS PSI / (bar) 500 (34) (31) 400 (28) (24) 300 (21) 250 (17) 200 (14) (H) (H) (L) (437) () 200 (93) 400 (204) 600 (316) 700 (371) () Min temperature -10 ºC (14 ºF) with connection tube made of carbon steel. Min temperature -49 ºF ( -45 ºC) with connection tube made of carbon steel. AlfaNova HP27 PED approval pressure/temperature graph* AlfaNova HP27 - ASME approval pressure/temperature graph* PS bar / (PSI) 40 (580) 35 (508) 30 (435) 25 (363) (H) (H) (L) PS PSI / (bar) 650 (43) 600 (40) (37) 500 (34) (31) 400 (27) (H) (H) (L) 15 (218) (24) (437) () 200 (93) 400 (204) 600 (316) 700 (371) () Min temperature -10 ºC (14 ºF) with connection tube made of carbon steel. Min temperature -49 ºF ( -45 ºC) with connection tube made of carbon steel. * For exact values please contact your Alfa Laval representative. Standard data Min. working temperature Max. working temperature Min. working pressure Vacuum Max. working pressure Volume per channel H, L, litres (ga) 0.05 (0.01) Max particle size mm (inch) 1.2 (0.05) Max. flowrate * m 3 /h (gpm) 7.5 (33) Min no of plates 6 Max no of plates 100 *) Water at 5 m/s (16.4 ft/s) (connection velocity) Standard materials Cover plates Connections Plates AlfaFusion filler 112 (4.33) 50 (1.97) A Standard dimensions* AlfaNova 27 A measure mm = 11 + (n x 2.42) A measure inch = (n x 0.095) Weight kg = 1 + (n x 0.13) Weight lb = ( n x 0.29) S4 S1 250 (9.84) 310 (12.20) AlfaNova 27 HP A measure mm = 13 + (n x 2.42) A measure inch = (n x 0.095) Weight kg = (n x 0.13) Weight lb = (n x 0.29) S3 S2 (n = number of plates) PCT00034EN 1006 Alfa Laval reserves the right to change specifications without prior notification. How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at

5 AlfaNova 52 / AlfaNova HP 52 Fusion plate heat exchanger General information AlfaNova is a plate heat exchanger made of 100% stainless steel. It is based on Alfa Laval s new revolutionary technology, AlfaFusion, the art of joining stainless steel components together. AlfaNova heat exchangers are well suited in applications which put high demand on cleanliness, applications where ammonia is used or applications where copper or nickel contamination is not accepted. Its high resistance to corrosion makes it both hygienic and environmental friendly. It is extremely compact compared to its capacity to withstand great strains in demanding heat transfer applications. Applications Within refrigeration: - Oil cooler - Condenser - Evaporator - Economizer - Desuperheater - Absorption systems Other main applications: - Domestic hot water heater - Process cooling - Hydraulic oil cooling - Laser cooling - Hygienic/sanitary - Water/water cooling & heating Working principles The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a bonded seal around the edge of the plates. The contact points of the plates are also bonded to withstand the pressure of the media handled. Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer design. Particulars required for quotation To enable Alfa Laval's representative to make a specific quotation, enquiries should be accompanied by the following particulars: flow rates or heat load required temperature program physical properties of liquids in question desired working pressure maximum permitted pressure drop Examples of connections Outside Inside Soldering Welding

6 AlfaNova 52 PED approval pressure/temperature graph* AlfaNova 52 - ASME approval prerssure/temperature graph* PS bar / (PSI) 30 (435) 28 (406) 26 (377) 24 (348) 22 (319) 18 (261) 16 (232) 14 (203) PS PSI / (bar) 500 (34) (31) 400 (28) (24) 300 (21) 250 (17) 200 (14) (437) () 200 (93) 400 (204) 600 (316) 700 (371) () Min temperature -10 ºC (14 ºF) with connection tube made of carbon steel. Min temperature -49 ºF ( -45 ºC) with connection tube made of carbon steel. AlfaNova HP 52 PED approval pressure/temperature graph* AlfaNova HP 52 - ASME approval pressure/temperature graph* PS bar / (PSI) 40 (580) PS PSI / (bar) 650 (45) 35 (508) 600 (40) 30 (435) 25 (363) 15 (218) (37) 500 (34) (31) 400 (27) (24) (437) () 200 (93) 400 (204) 600 (316) 700 (371) () Min temperature -10 ºC (14 ºF) with connection tube made of carbon steel. Min temperature -49 ºF ( -45 ºC) with connection tube made of carbon steel. * For exact values please contact your local Alfa Laval representative. Standard data Standard materials Min. working temperature Max. working temperature Min. working pressure Max. working pressure Vacuum Volume per channel H, L, litres (ga) (0.025) Max particle size mm (inch) 1.2 (0.05) Max. flowrate * m 3 /h (gpm) 14.5 (64) Min no of plates 6 Max no of plates 150 Cover plates Connections Plates AlfaFusion filler 112 (4.41) 50 (1.97) A *) Water at 5 m/s (16.4 ft/s) (connection velocity) Standard dimensions* S4 S1 AlfaNova 52 A measure mm = 11 + (n x 2.48) A measure inch = (n x 0.098) Weight kg = (n x 0.22) Weight lb = (n x 0.48) 466 (18.34) 526 (20.7) AlfaNova 52 HP A measure mm = 13 + (n x 2.48) A measure inch = (n x 0.098) Weight kg = (n x 0.22) Weight lb = (n x 0.49) S3 S2 (n = number of plates) PCT00035EN 1006 Alfa Laval reserves the right to change specifications without prior notification. How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at

7 AlfaNova 76 / AlfaNova HP 76 Fusion plate heat exchanger General information AlfaNova is a plate heat exchanger made of 100% stainless steel. It is based on Alfa Laval s new revolutionary technology, AlfaFusion, the art of joining stainless steel components together. AlfaNova heat exchangers are well suited in applications which put high demand on cleanliness, applications where ammonia is used or applications where copper or nickel contamination is not accepted. Its high resistance to corrosion makes it both hygienic and environmental friendly. It is extremely compact compared to its capacity to withstand great strains in demanding heat transfer applications. Applications Within refrigeration: - Oil cooler - Condenser - Evaporator - Economizer - Desuperheater - Absorption systems Other main applications: - Domestic hot water heater - Process cooling - Hydraulic oil cooling - Laser cooling - Hygienic/sanitary - Water/water cooling & heating Working principles The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, always in counter-current flow. The media are kept in the unit by a bonded seal around the edge of the plates. The contact points of the plates are also bonded to withstand the pressure of the media handled. Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer design. Particulars required for quotation To enable Alfa Laval's representative to make a specific quotation, enquiries should be accompanied by the following particulars: flow rates or heat load required temperature program physical properties of liquids in question desired working pressure maximum permitted pressure drop Examples of connections Outside Inside Soldering Welding

8 AlfaNova 76 PED approval pressure/temperature graph* PS bar / (PSI) 30 (435) 28 (406) 26 (377) 24 (348) 22 (319) 18 (261) 16 (232) 14 (203) (H, E, A) (H, E, A) (L) (437) () Min temperature -10 ºC (14 ºF) with connection tube made of carbon steel. AlfaNova HP 76 PED approval pressure/temperature graph* PS bar / (PSI) 40 (580) 35 (508) 30 (435) 25 (363) 15 (218) (H, E, A) (H, E, A) (L) (437) () Min temperature -10 ºC (14 ºF) with connection tube made of carbon steel. * For exact values please contact your local Alfa Laval representative.

9 AlfaNova 76 ASME approval prerssure/temperature graph* PS PSI / (bar) 500 (34) (31) 400 (28) (24) 300 (21) 250 (17) 200 (14) (H, E, A) (H, E, A) (L) 200 (93) 400 (204) 600 (316) 700 (371) () Min temperature -49 ºF ( -45 ºC) with connection tube made of carbon steel. AlfaNova HP 76 ASME approval pressure/temperature graph* PS PSI / (bar) (H, E, A) (H, E, A) 600 (40) (37) 500 (34) (31) 400 (27) (24) 300 (21) (L) 200 (93) 400 (204) 600 (316) 700 (371) () Min temperature -49 ºF ( -45 ºC) with connection tube made of carbon steel. * For exact values please contact your local Alfa Laval representative.

10 Standard data Min. working temperature Max. working temperature Min. working pressure Vacuum Max. working pressure Volume per channel A, H, L, litres (ga) 0.25 (0.07) Volume per channel E, litres (ga) 0.18 (0.05) Max particle size, mm (inch) 1.2 (0.047) Max. flowrate* m³/h (gpm) 34 Min no of plates 10 Max no of plates 150 Standard materials Cover plates Connections Plates AlfaFusion filler 192 (7.56) 92 (3.62) A *) Water at 5 m/s (16.4 ft/s) (connection velocity) Standard dimensions S4 S1 AlfaNova 76 H, L channels A measure mm = 11 + (n x 2.85) + 5 A measure inch = (n x 0.11) A channel A measure mm = 11 + (n x 2.56) + 5 A measure inch = (n x 0.10) E channel A measure mm = 11 + (n x 2.29) + 5 A measure inch = (n x 0.09) S3 S2 519 (20.43) 767 (38.98) H, A, E channels weight kg = 8 + (n x 0.49) weight lb = (n x 1.08) L channels weight kg = 8 + (n x 0.42) weight lb = (n x 0.93) 260 (30.2) 199 (7.83) AlfaNova HP 76 H channel A measure mm = 15 + (n x 2.85) + 5 A measure inch = (n x 0.11) A channel A measure mm = 15 + (n x 2.56) + 5 A measure inch = (n x 0.10) E channel A measure mm = 15 + (n x 2.29) + 5 A measure inch = (n x 0.09) L channel A measure mm = 17 + (n x 2.85) + 5 A measure inch = (n x 0.11) H, A, E channels weight kg = 10 + (n x 0.49) weight lb = 22 + (n x 1.08) L channel weight kg = 10 + (n x 0.42) weight lb = 22 + (n x 0.93) (n = number of plates) PCT00036EN 1006 Alfa Laval reserves the right to change specifications without prior notification. How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at

11 AlfaNova 400 / AlfaNova HP 400 Fusion plate heat exchanger General information AlfaNova plate heat exchangers are made of 100% stainless steel. It is based on Alfa Laval s new revolutionary technology, AlfaFusion, the art of joining stainless steel components together. AlfaNova heat exchangers are well suited in applications which put high demand on cleanliness, applications where ammonia is used or applications where copper or nickel contamination is not accepted. Its high resistance to corrosion makes it both hygienic and environmental friendly. It is extremely compact compared to its capacity to withstand great strains in demanding heat transfer applications. Applications Evaporators Economizers Absorption systems Process cooling/heating Working principles The heating surface consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in countercurrent flow. The media are kept in the unit by a bonded seal around the edge of the plates. The contact points of the plates are also bonded to withstand the pressure of the media handled. Examples of connections Standard design The plate pack is covered by cover plates. Connections are located in the front or rear cover plate. The channel plates are corrugated to improve heat transfer design. Particulars required for quotation To enable Alfa Laval's representative to make a specific quotation, enquiries should be accompanied by the following particulars: Compact flanges flow rates or heat load required temperature program physical properties of liquids in question desired working pressure maximum permitted pressure drop Welding Clamp Soldering Outside

12 AlfaNova 400 PED approval pressure/temperature graph* PS (bar/psi) 18 (261) 16 (232) 14 (203) 12 (174) (437) () Min temperature -50 (-58 ) with connection tubes made of carbon steel. AlfaNova HP 400 PED approval pressure/temperature graph* PS (bar/psi) 30 (348) 28 (406) 26 (377) 24 (348) 22 (319) 18 (261) 225 (437) 400 (2) 500 (932) Min temperature -50 (-58 ) with connection tubes made of carbon steel. * For exact values please contact your local Alfa Laval representative.

13 AlfaNova 400 ASME approval pressure/temperature graph* PS PSI / (bar) 290 (20) 261 (18) 246 (17) 232 (16) 217 (15) 203 (14) () Min temperature -49 (-45 ) with connection tubes made of carbon steel. AlfaNova HP 400 ASME approval pressure/temperature graph* PS PSI / (bar) 362 (25) 333 (23) 304 (21) 2 (19) 232 (16) () Min temperature -49 (-45 ) with connection tubes made of carbon steel. * For exact values please contact your local Alfa Laval representative.

14 Standard data Min. working temperature Max. working temperature Min. working pressure Vacuum Max. working pressure Volume per channel, litres (ga) 0.74 (0.20) Max. particle size mm (inch) 1.8 (0,07) Max. flowrate * m 3 /h (gpm) 170 (748) Min no of plates 10 Max no of plates 270 *) Water at 5 m/s (16.4 ft/s) (connection velocity) Standard dimensions AlfaNova 400 A measure mm = 14 + (n x 2.65) + 10 A measure inch = (n x 0.10) Weight kg = 62 + (n x 1.4) Weight lb = (n x 3.08) AlfaNova HP 400 A measure mm = 17 + (n x 2.65) + 10 A measure inch = (n x 0.10) Weight kg = 67 + (n x 1.4) Weight lb = (n x 3.08) (n = number of plates) Standard materials Cover plates Connections Plates AlfaFusion filler 390 (15.35) 225 (8.86) A S4 S1 S3 S2 242 (9.53) 160 (6.3) 3 (49.33) 990 (38.98) 825 (32.48) 366 (14.41) 466 (18.34) 200 (7.87) + A 260 (10.24) + A PCT00037EN 1006 Alfa Laval reserves the right to change specifications without prior notification. How to contact Alfa Laval Up-to-date Alfa Laval contact details for all countries are always available on our website at