Table of Contents Committees, Preface A Cloth Simulation Method for Cloth/ Machinery Coupled System Unified Modeling

Transcription

1 Table of Contents Committees, Preface A Cloth Simulation Method for Cloth/ Machinery Coupled System Unified Modeling H.Y. Yu, Y.X. Wang, S.Z. Wang and Z.F. Geng 1 A Drive-Transmission Integrated Linear Electromechanical Actuator W.J. Chen, J. Zhang and Y.Z. He 5 A Mathematical Principle and Application on Design of Planar Six-Bar Mechanism with unto Three-Ordered Intermission at Limit Position(s) H.X. Wang and N. Dai 9 A Method of Online Color-Difference Detecting Based on Image Processing and its Application L.J. Zhong and W.W. Li 14 A New Method for Accurately Evaluating Planar Straightness Error J. Yuan, Z.X. Qiu and J.W. Cao 18 A Novel CAM System with X/Y/Z 3-Axis Machines for Large Scale Aspheric Lens Grinding X.Y. Lei, H. Huang, S.H. Zhang, J. Wang, Q. Xu and Y.B. Guo 23 A Novel Feature Extraction Method Using Ant Colony Clustering Analysis D.B. Zhao and J.H. Yan 32 A Research on Transition of Urban Communities and Sustainable Lifestyle in China X.J. Zhou and X. Liu 36 A Review of Surface Texture of Tribological Interfaces Z.W. Wang, M.W. Chen, J.W. Wu, H.H. Zheng and X.F. Zheng 41 A Scheduling Algorithms of DNC Systems Based on CAN and Program Expending Rate H.L. Cai, Z.G. Li and E.E. Ren 46 A Squeeze Casting Die Temperature Control System Based on Fuzzy Control F.Q. Ying and T.M. Guo 50 A Study on Holonic Control in Intelligent Car Y. Chao, Q.H. Lei, D.D. Fu and L.Q. Wu 55 A Study on Methodology to Collect Customer Requirements through the Internet S.L. Liu and F. Shen 59 A Study on Nanocrystalline Nickel Parts Prepared by Jet Electrodeposition J.S. Chen, Y.H. Huang, B. Qiao, J.M. Yang and Y.Q. He 64 A Web-Based Collaborative Evaluation Platform for Mechanical Conceptual Design M.Y. Wang, L.G. Shen and Y.M. Deng 68 Accuracy Analysis and Simulation of Three Degrees of Freedom Parallel Machine Tool X.S. Li, J. Wang and G.Q. Cai 73 Adaptable Redesign of Existing Equipment Responding to Unanticipated Environment Changes Z.J. Liu, H.F. Teng and Q.H. Hu 77 Air-Lubricated Pneumatic Workbench C.H. Wu, S.M. Wan and B. Lin 82 An Analysis of Thermal-Structural Characteristics for Precision Linear Rolling Guide CNC Grinding Machine Tool s Bed X.L. Deng, J. Fu, Y. He, Z.C. Chen and H.F. Jiao 86 An Anti-Collision Device with Circumferentially Energy Absorption under a Local Impact Q.H. Zhang, L.L. Song, C.W. Liang and D.J. Chen 90 An Attempt of Using the National Color Culture on Product Design Y.X. Zhou and L.L. Yang 94 An Evaluation Method of the Visual Elements of the NC Machine Operation Panel Based on RBFN X.R. Hou and J.M. Che 98 An Expert System for Negative Developing Y.L. Wang and H. Wang 104 An Improved Adaptive Interpolation Scheme for NURBS Curve J.X. Chen and S.W. Lin 108

2 An Ontology-Enabled Production in Product Lifecycle Management J. Cui and X.B. Xu 112 An Unequal-Sized Unidirectional Loop Layout Design Problem Considering Empty Vehicle Trip Y.L. Li, B. Li and S.J. Luo 116 Analysis of Dynamic Characteristics of Rotary Mechanism for Boom Type Roadheader M. Zhang, J.J. Ren, L. Dong and X.S. Wang 122 Analysis of Dynamic Characteristics of Space Deployable Antenna Based on ANSYS D.K. Tian, R.Q. Liu, Z.Q. Deng and H.W. Guo 127 Analysis of Grinding Parameters on Hardness Layer Depth L. Zhang, X.H. Xu and C.F. Yang 131 Analysis of Heating Performances for Ultra-High Speed Electric Spindle Bearings Based on the Energy Theory of TEHL in Point Contact State S.S. Li, Z.H. Hu, P. Zhou, P. Chen, X.Y. Chen, J.M. Gu and L.X. Fu 135 Analysis of Influence Parameters on Axial Movement Displacement about Cross Wedge Rolling Asymmetric Shaft Part W.F. Peng, K.S. Zhang and Z.H. Hu 141 Analysis of the Corner Error in WEDM L.J. Yang and X.N. Dang 146 Analysis on Green Design Methods in Modern Furniture J.F. Xu and H.N. Zhang 150 Analysis on the Workspace of a Tomato Harvesting Manipulator with 7 DOF X.F. Liang and Y.W. Wang 155 Analytical Robust Design of a Gear Milling Machine Headstock Y.L. Chen, S. Liu, H.T. Wang and P.H. Gu 162 Analyzing of the Thermal Stress and Fatigue Life of the Liquid Core Heavy Reduction Rolling Mill s Roller D.Y. Sun, Y.F. Zhang, X.W. Zha, W.W. Liu, H.W. Ma and Y.Q. Fan 166 Application and Analysis of RBF Neural Network for Burr Prediction in Micro-Machining Y.M. Zhu and G.C. Wang 171 Application of Analog Compound Orthogonal Neural Network to Temperature Control of Electric Heating Dryers H.L. Wei and L.G. Gu 176 Application of FEM Analysis to Fault Diagnosis of Cracked Rotor K. Yang and Y. Yang 181 Application of Maslow's Hierarchy of Needs to Modern Chinese Furniture H.N. Zhang and J.F. Xu 185 Application of the Structural Topological Optimization in the Column Stability Design B.C. Bian, G.M. Peng and Y.K. Sui 190 Application Research on Collaborative Design of Engineering Machinery Design K.X. Guo, Y. Huang and H. Zong 194 Application Study on Resonance Demodulation Technique in Fault Diagnosis of Gear Box Q. Hao, L.X. Gao, X. Wang and H. Ye 198 Artificial Intelligence Application in Modern Management R. Jiang 203 Automatic Visual Inspection System of Gas Valve s External Taper Thread Based on Image Domain X.С. Zhang, X. Zhang, Y.H. Lou and J.H. Chen 207 Axis to Plane Perpendicularity Error Evaluation Based on New Generation GPS Y.H. Sun, J. Zhang, M.F. Huang, J.T. Huang and X. Cheng 213 Behavioral Characteristics Analysis and Structural Design of Conceptual Interface of Mechanical Products K. Wang and H.B. He 217 Behavioral Characteristics of Electromechanical Products and Their Representation Based on a Modified Petri Net H.B. He and K. Wang 222 Behavioral Process Characteristics of Assembly Devices and Their Conceptual Design L. Shi and Y.M. Deng 226

3 b Advances in Engineering Design and Optimization Biomimetic Micropore of Bearing Human Bone in the Design and Optimization Based on Finite Element Analysis and Simulation L.J. Yang, X.N. Dang, L.L. Wang and L. Zhou 230 Buffer Groove Design of Continuous Rotary Electro-Hydraulic Servo Motor Used in Simulator X.J. Wang, J.P. Shao and G.B. Yu 234 CAD System of the Cold Extrusion Die Based on VB S.Z. Zhou, X.M. Yuan and J. Fan 238 Calculation Method for the Theoretical Displacement of Cycloidal Pump Y.F. Wu, C.L. Xia and Y.G. Shi 242 Color Image Denoising Using Gaussian Multiscale Multivariate Image Analysis D.T. Liang 248 Computer Aided Price Quoting Package for Injection Mould Based on Standard Man-Hour Method Z.X. Jia, H.B. Wu, J.Q. Li and M.C. Fang 253 Computer Numerical Controlled Coil Winding of the Electric Welding Machine Y. Wang, X.J. Wang and S.M. Hua 259 Computer Vision-Based Augmented Reality System for Assembly Interaction H.W. He, Y.M. Wu, D.T. Zheng and Y. Rao 263 Concept Design of Spraying System Based on Function Analysis of Spraying Robots W.M. Zhao and B. Hu 270 Cost Estimation Model of Modular Product Family H.L. Wang, L. Hou, C.R. Liu and Q.L. Wang 276 Cutting Process Analysis for Uniform and Variable Edge Tools Z. Li, A.B. Yu, H. Wang and L. Dong 280 Debond Propagation in Honeycomb Structure under Pure Bending Load W.R. Gong, J.L. Chen and J. Wang 284 Deflection and Stress Analysis of Glass Plate in Elastic Deformation Processing D.N. Nguyen, J.L. Yuan, B.H. Lv and Z. Wu 288 Design and Optimization of the Suspension System on the Wheel-Tracked Exploration Robot W.Y. Shang and F.J. Qiu 294 Design and Simulation of Electric Pallet Truck Hydraulic Anti-Skid System G.P. Li, L.W. Wang and L.S. Shu 299 Design Calculation about Oxynitride Concentration for Tunnels on Inghai-Tibetan Railway S.X. Sun and N.Y. Yu 304 Design Intervention for Social Innovation: Two Service Design Workshops in Italy and China M.S. Gong, L.H. Zhang and X. Zhang 308 Design Management and the Development of Chinese Industrial Design X. Song 313 Design of 2-DOF Micro-Positional Stage Based on Parallel Structure Using Flexible Plate H. Chun, Y.G. Cui, Y. Li and L. Qiu 317 Design of a Knowledge-Based Self-Assessment System for Enterprise Knowledge Management Evaluation Y. Xu, H.F. Zhan, J.H. Yu and L. Sun 322 Design of Forming Shape Measurement System for Laser Molten Pool in Laser Fabricating J.B. Lei, Z. Wang and L.F. Liu 327 Design of Rank Accuracy Detection System for Screw Z.X. Meng, Z.W. Li and J. Cao 331 Design of Surface Roughness Measurement Bench Based on Stewart Platform X.B. Pan, Y.M. Tang and X.J. Zhou 335 Design Research on Working Mechanism of Beam Pumping Unit J. Liu and J. Zhu 340 Design Study for Parallel Robot Based on Virtual Prototyping H.L. Chen, L.R. Hong, T.L. Wang, K.B. Lu and Y.F. Luo 344 Development of CNC Lower Pressure Water Jet Cutter D.S. Zhang, Z.W. Dong, B. Chen and L.Z. Yang 349

4 Applied Mechanics and Materials Vols c Development of Electromagnetic Composite Ring Expansion as a Fragile Material Test Technique G.Y. Zhou, J. Liu, X.L. Dong and F.H. Zhou 354 Deviation Control of Weld Seam Tracking Based on Laser Image Sensing L.J. Liu and Y.H. Lou 358 Dimension Classification Method of Multi-Loop Planar Mechanism D.F. Zhao and G.Y. Zeng 362 Dynamic Analysis of a Calibration Mechanism D.W. Sun, Z.G. Chen and G.Y. Zhang 366 Dynamic Characteristics Analysis for the Bed of CNC Machine Tool S.R. Zhang, X.G. Li, L.F. Yang and B. Yu 370 Dynamic Characteristics Analysis of Precision Linear Rolling Guide CNC Grinding Machine Tool s Bed X.L. Deng, J. Fu, Y. He, Z.C. Chen and Z.Y. He 374 Dynamic Performance Analysis of a Machine Tool Considering Linear Rolling Guideway Y.M. Zhang, Z.K. Xie and Q.W. Liu 378 Dynamic Simulation Analysis on Flexible Assembling Fixture for Aircraft Panel Component L.G. Qu, K.Q. Pan and X. Chen 382 Effect of Specimen Ball Diameter on Contact Stress J.L. Zhou, G.Q. Wu, X.Y. Chen and W.N. Zhu 386 Effect of Ultrasonic on Properties of Electroplated Diamond Tools X.Z. Wang, A.B. Yu, B. Lin and N. Bao 390 Effect of Wheel Elasticity on Grinding Stability A.B. Yu, L. Dong and Y.L. Wang 394 Electrodeposition of Fe-Diamond Composite Material for Manufacture of Diamond Tools B.S. Pan, X.H. Fang and Y.C. Tian 398 Enterprise Cluster Entity Modeling Based on Product L. Sun, J.H. Yu, H.F. Zhan and Y. Xu 402 Evaluation of Innovation Effect of Residential Design Based on Fuzzy Comprehensive Evaluation Method A.P. Pan 407 Experiment Research on Dynamic Cutting Force and its Power Spectrum H.J. Liu and M. Min 412 Experimental Investigation and Research on Forming Process of Micro Flat-Wire C.C. Fok, Z.N. Guo, Z.Q. Yu and J.W. He 417 Experimental Investigation on Grinding-Induced Surface Damage of Fiber Reinforced Ceramic Matrix Composites Y.S. Shi, Y.G. Wang, B. Lin and A.B. Yu 424 Experimental Study of the Small Lubrication Holes on the Die Shoulder on the Formability in Cylindrical Cup Deep-Drawing Y.Q. Shi 428 Experimental Study on High Alloy Antifriction Cast Iron in High-Speed Cutting L.J. Ma and Z.T. Zhou 432 Experimental Study on Optimizing Process Parameters in Two-Dimensional Ultrasonic Rolled Extrusion J.X. Zheng, J.J. Jiang and C.S. Liu 435 Experimental Study on Performance Characteristics of Magnetorheological Damper Z.N. Hou, Z.M. Feng, H.G. Hu and G.B. Wu 439 Experimental Study on Piezoresistivity and Magnetoresistivity of Magnetorheological Elastomers W.Q. Ye, Y.M. Deng and W. Wang 444 Experimental Study on the Fabrication of the Light Guide Plate with Hot Embossing Method Y. He, T. Zhang, J. Fu and Z.C. Chen 448 Experimental System Design of Tension Measure and Control Based on MRF Damper B. Huang, D. Zheng, L.Y. Hu and F. Lu 453 Exploration of a New Leaned Blade Flat Hydrodynamic Torque Converter X.L. Zhu, C.B. Liu, W.X. Ma and X.Q. Wu 457

5 d Advances in Engineering Design and Optimization Failure Analysis of Hydrogen Corrosion of the Lens Gasket X.C. Ma and G.F. Xu 462 Fatigue Life Analysis of Large-Scale Liner Vibration Screener Based on ANSYS Y.Y. Wang, X.H. Fu, T.T. Guo, L. Chen and H.Q. Mao 466 Feasibility Study of Using the Chinese Traditional Five Elements Chromatology on the Industrial Design Y.X. Zhou, F. Shen and L.L. Yang 471 Feature-Based Collaborative Design in VPDM K.S. Liang, J.Z. Shang, L. Tang, Y.J. Cao and C. Cheng 475 Finite Element Analysis and Structure Optimization on Light-Duty Truck Driving Axle Housing J.S. Fu, J. Wang and J.F. Wang 482 Finite Element Analysis of Radial Bearing Magnetic Field G.Q. Wu, W.N. Zhu and J.L. Zhou 486 Finite Element Static Analysis on Heavy-Duty Truck Gearbox Housing J.S. Fu, J.F. Wang and J. Wang 491 Focus on Connotation Construction Building Engineering Training Practice Base under Local Characteristics X.W. Miao and G.F. Yuan 496 Fuzzy Reliability Optimization Design Method of Flange Based on the Tightness of Bolted Flanged Connections Z.G. Sun, B.Q. Gu and X.L. Huang 501 Geometric Error Detection and Identification of a Heavy NC Boring and Milling Machine Tool by Using Laser Tracker X.Q. Zhu, D. Gao and G.W. Cui 505 Geometric Information Measurement Based on Structured Light Z.J. Ma, N. Dai and H.H. Cui 509 Image Measurement of Roller Chain Board Based on CCD Q.M. Liu, Z.K. Liu, Q.H. Lei and K. Zhang 513 Improved Sensing Block Method and its Application in Measurement of Dynamic Load H.L. Yuan, X.L. Dong and J. Yang 517 Improving the Quality in Deep Drawing of Rectangle Parts Using Variable Blank Holder Force Y.Q. Shi 521 Inclination Errors Evaluation of Planar Lines with a Chaos Optimization K. Zhang and X.M. Cao 525 Influence Factor Analysis for Tension Control Based on MRF Damper L.Y. Hu, D. Zheng, J.M. Zhan and Y.M. Deng 529 Influence of Bolted Joint on Dynamic Characteristics of Combined Three-Section Crossbeam T.N. Guo, D.L. Guo, L.G. Cai, B. Song and J.N. Zhao 534 Influence of Direct Current Magnetron Sputtering Parameters on Electrical Properties of Copper Films Y.Q. Hua, R.F. Chen, Z.X. Niu and J. Yu 540 Influence of Micro Trapezoidal-Groove on Behavior of Sliding Tribopairs P.Y. Zhang, Y.H. Zhang, X.L. Wang, X.J. Hua and Y.H. Fu 544 Influence of Reground Tool Sharpness on Micro-Cutting Process X.L. Tian, Z. Li, X.J. Tang, F. Guo and A.B. Yu 550 Influence of the Position Deviation of Rotated Dual-Plates Lapping on Sphere P. Zhao, H.W. Fan, J.J. Chen, J.L. Yuan, B.H. Lv and Q.F. Deng 554 Injection Molding Flow Simulation of Thin-Walled Slender Tube and Optimization of Combined Cavity J. Liu, G.M. Wang and B.S. Sun 559 Injection Molding Process Optimization of Multi-Objective Based on MUD-RBFNN-GA B.S. Sun, Z. Chen, B.Q. Gu and X.D. Huang 564 Injection Molding Process Parameter Optimization for Warpage Minimization Based on Uniform Design of Experiment B.S. Sun, Z. Chen, B.Q. Gu and X.D. Huang 570

6 Applied Mechanics and Materials Vols e Inside & Outside -Design Method for Small and Medium-Sized Enterprises X.C. Wang and K.J. Shi 576 Intelligent Control System for Ceramics Ball Test Rig J.L. Zhou, J.C. Chen, G.Q. Wu and X.Y. Chen 580 Intelligent Prediction for Surface Roughness of CNC Surface Grinding Machine Tool Based on Bayesian Network H.F. Jiao, J. Fu, Y. He and X.L. Deng 584 Inter-Enterprise Quality Information Dynamic Tracking Based on Process Quality BOM L.P. Zhao, Y.Y. Yao and D.M. Xu 589 Investigation into Fluid Velocity Field of Wedge-Shaped Gap in Grinding C.H. Li, Z.L. Han and J.Y. Li 593 Investigation of SPR Mechanical Performance with Aluminum Alloy Sheet J.H. Zhao, S.M. Wan and S.Y. Li 599 Joint Detail Simulation by Beam Element in Vehicle Body W.B. Hou, H.Z. Zhang, P. Hu and X.C. Pan 603 Kinetics Analysis and Simulations on Load Fork Mechanism in Forward-Type Stacker J.Y. Bai, S. Tong, Z.H. Yu and D. Zheng 608 Loading Behaviors of Superposed Aqueduct Affected by Segregating Layer Between PPCBs and Cast-In Situ RCF S.B. Zhao, S.W. Pei, Y.W. Wang and X.J. Liang 614 Manufacturing and Green Estimation of Composite Concrete Machine Tool Bed J.M. Ding and C. Su 619 Manufacturing Process for Circular-Arc Curvilinear Cylindrical Gears with Predesigned Fourth Order Transmission Error J.Z. Su and Z.D. Fang 623 Mechanical Analysis and Optimum Design of Universal Panel Construction Formwork System K. Wang, X.T. Wang, M. Qu and X.D. Chen 628 Mechanism of Zn Vapour Suppressed by Al In Laser Lap Welding of High Strength Zinc Coated Sheet Steel S.Q. Zhou and Z.G. Peng 634 Mesh Analysis and Realization of Gear Honing with Globoid Honing Worms on Gear Hobbing Machine T. Yu, K. Dong, S.Y. Wang and Y.X. Qian 643 Microscopy Photoelasticity for Studying Crazes in Polycarbonate Z.T. Wang, J.L. Chen and R.C. Wang 648 Microstructure and Interface Strength of MMCs Prepared by Pressureless Ni-Induced Infiltration Using Fe Alloy S.F. Yang, W.P. Chen, M.Y. Han and D.Z. Zhu 652 Microstructure and Wear Resistance of Laser Remelted Boronizing Layer of Petrochemical Key Parts S.F. Chen, J.B. Lei and X.B. Liu 658 Microstructure Design with Generalized Shape Optimization Based on Level Set Geometrical Description and X-FEM K.P. Qiu and W.H. Zhang 662 Mixed Natural Neighbor Galerkin Method for 3D Couple-Stress Elasticity K. Wang, S.J. Zhou and Z.F. Nie 667 Model Analysis of Gilling Machine X.G. Liu, B. Lin and K. Chen 671 Model and Algorithm of JIT Purchase Based on Actual Freight Rate W.M. He, Y.H. Hu and L.L. Guo 675 Modeling and Simulation of Rotated Dual-Plates Ball-Lapping J.L. Yuan, Y.L. Hu, B.H. Lv, Q.F. Deng and X. Ma 679 Modeling and Simulation of Rural Two-Direction Logistics System Based on Stochastic Petri Nets K. Nie, M.Y. Lai, W. Li and E.B. Cao 684 Modern Logistics Service Quality Evaluation Index Selection and Empirical Research Z. Yang 688

7 f Advances in Engineering Design and Optimization Modular-Based Platform Planning for Product Family L. Fan, L.P. Zhao and Y.Y. Yao 693 Multi-Attribute Decision Making Method Based-On Information Axiom with Incomplete Information for Functional Requirements X.F. Cheng 697 NC-Electrochemical Contour Evolution Machining for Globoidal Indexing Cam X.F. Tang and W. He 702 Network Failure Model Approach Based on FMEA Z.H. Sun, C. Chen, H.B. Shan and S.H. Zhou 706 Ni-Doping Alumina Foams for Fabricating MMCs by Pressureless Infiltration Using Fe Alloy S.F. Yang, W.P. Chen, M.Y. Han and D.Z. Zhu 712 Noise Radiation Analysis of Structural-Acoustic Coupling System of a Gear Box J.X. Zhou, G. Liu and S.J. Ma 718 Numerical Analysis of Pressure Straightening Process to High Pressure Boiler Tube Y.Q. Tian, Q.X. Huang and J.B. Li 723 Numerical Fitting of Processing Load and Downward Movement of Semi-Fixed Abrasive Plate X. Lv, J.L. Yuan and C.D. Lu 727 Numerical Simulation of Cutting Force and Temperature Field in High Speed Machining of Titanium Alloys C.M. Yan and Y.X. Lin 731 Numerical Simulation of Gas-Particle Two Phase Flow in the Process of Cold Spraying Aluminum Zinc-Base Alloy Powder C.S. Liu, J.W. Cheng and J.X. Zheng 735 Numerical Simulation of Oil Mist Process in Cold Heading Machine G.C. Xu, Q.X. Hu, L.M. Li and C.X. Dai 739 Numerical Simulation on Oil-Flow-State of Gap Oil Film in Sector Cavity Multi-Pad Hydrostatic Thrust Bearing X.D. Yu, X.L. Meng, H. Jiang, X.Z. Lou, B. Wu, H.J. Xiang, X.Z. Sun, C.Q. Yang and J.F. Wang 743 Numerical Study of Volute Casing for PIV Measurement by Using FLUENT and ABAQUS Software C.L. Shao, B.Q. Gu and X.L. Huang 748 Numerical Study on Solidification Process and Shrinkage Porosity for Engine Block Casting J.X. Liu, R.D. Liao and Z.X. Zuo 753 On Matrix Unit Test Plan for Testing of Product Properties Z.B. Xie and L. Shi 757 On Product Refinement Design and Prototype Test Z.B. Xie and L. Shi 761 On the Methods for Evaluating Product Concept Design Z.B. Xie and L. Shi 765 One-Step Alcohothermal Synthesis and Growth Mechanism of NiSe 2 Porous Octahedron Y.H. Zhu, J.J. Ma and Q. Yang 769 On-Machine Profile Measurement of Arc Grinding Wheel in 3-Axis Machine Using Non- Contact Displacement Sensor H. Huang, X.Y. Lei, Q. Xu, Y.B. Guo and W. Luo 773 Optimal Dispatch of Power System with Stochastic Wind Generation S. Wang, H.M. Yang, S. Zuo and W.J. Xu 783 Optimization and Improvement of the Characteristic of Material Flow of Mixer Truck Assembly Line G.G. Zhang, Z.B. Chang and H.R. Zhang 787 Optimization Design of Powder Molding Pressing Frame Based on Precision Effect J. Liu, X.L. Dong and G.Y. Zhou 791 Optimization Design of the Secondary Calibration of Line Structured Light Vision System K. Zhang, X.S. Cheng, N. Dai and H.H. Cui 797 Optimization for Spindle of Jade Carving Machine Based on Fuzzy Reliability Theory H.R. Shi and Y.N. Rui 801

8 Applied Mechanics and Materials Vols g Optimization for the Connection Parameters of HSK Tool Shanks F. Liu, B. Lin and Y.M. Gong 806 Optimization of Collaborative Scheduling in Supply Chain Z.Z. Zheng and Y.H. Hu 810 Optimization of Maximum Entropy Model Oriented to Bayes Prior Distribution Based on PSO Y. Dai, Z.M. Wang and G. Ling 814 Optimum Design of Flat End Face Mechanical Seal Based on Coupling Analysis J.F. Zhou, B.Q. Gu and C.L. Shao 819 Output Tracking Control and Synchronization of Continuous Chaotic Systems Using Differential Evolution Algorithm S.B. Liu, S.M. Zhou and L.Y. Hu 823 Parameter Optimization and Design of Radial Telescopic-Type Tire Building Drum W.D. Sun, Y.B. Ni and Y.H. Yang 829 Parameter Optimization for a Polymer Electrolyte Membrane Fuel Cell Model X. Li, Q. Yan and D.T. Yu 834 Parameter Optimization for Oil/Air Lubrication of High Speed Ceramic Motorized Spindle without Bearing Inner Rings S.H. Li, Y.H. Wu and K. Zhang 839 Parameter Optimization of Laser Scribing Technics of 30Q130 Grain-Oriented Silicon Steel Based on Genetic Neural Network Y. Huang, Y. Liu and G.L. Zhu 844 Parameters Design and Motion Analysis of Rolling-Cut Shears D.Y. Sun, Y. Zhao, J.D. Peng, C.S. Xu, C.G. Dong, J. Wang and R.M. Mei 849 Parametric Design for Hydraulic Mounting Engine C. Chen, Y.J. Jiang and L. Huang 853 Performance Analysis and Parameter Optimization of a Planetary Mixer M.J. Yang, X.W. Li, T.L. Shi and S.Z. Yang 858 Performance Comparison between an MRF Damper and an MRE Isolator Incorporated with a Building Structure Y. Zhou, W.H. Li and M.N.S. Hadi 862 Performance Simulation and Design of New Series Hydraulic Hybrid Bus P.Y. Xi and S.Q. Chang 866 Precise Impact Drive Mechanism Based on Asymmetrically Clamped Piezoelectric Actuator S.M. Hua, G.M. Cheng, Z.Y. Zhang and P. Zeng 870 Precision Forming of Pipe Joint Based on Cold Extrusion Technology S.M. Xu, H.G. Huang and D.Y. Sun 875 Prediction for Shoe Factor of Drum Brakes Based on Nonlinear 3D Simulation Models X.B. Ning, J.S. Shen and B. Meng 880 Prediction of Building Deformation Caused by Subway Construction N. Liu and C.S. Zhang 886 Prediction of Properties of MgO-C Refractory Based on Micromechanics Model Z.G. Wang, C.M. Liu, N. Li and Y. Wang 890 Preliminary Exploration on Control Theory of Ultraprecision Stage with Large Travel L. Shi and B. Lin 895 Printed Circuit Board Assemble Process Decision-Making System Based on Knowledge X.G. Kong, Y.X. Wang and B.Q. Ma 899 Processing Quality Dynamic Control Based on Quality State Y.Y. Yao, L.P. Zhao and Y.T. Qin 905 Product Bionics Form Design Based on Users Kansei Image L. Ding, J.M. Che and X.F. Dong 910 Product Design Strategies and Methods for Automatic Conveying Y.H. Lou, L.J. Liu and X.C. Zhang 915 Pump-Control-Motor Combined Speed Governing Control Platform Based on Virtual Instrument T.H. Peng, J.D. Liu, X.S. Hao and M.S. Yang 919 QNX and Simulink-Based Control Platform for HIT/DLR II Robot Hand M.H. Jin, D.J. Wang, S.W. Fan and Z.P. Chen 923

9 h Advances in Engineering Design and Optimization Realization of Expected Direction Angle of SGM Spiral Bevel Gears Based on Local Synthesis G.L. Liu, Y.J. Tian and P. Jiang 927 Relationships between Tensile Mechanical Properties and Roughness of Tensile Fracture About 16MnR Steel after High Temperature S. Zhang, A.Z. Liu and J.H. Cui 934 Reliability Analysis and Improvement of ATCs of CNC Lathes Y. Wang, X.J. Wang and S.M. Hua 939 Research and Application of Macro-Based Tool Library Integration in CATIA Enviroment X.G. Kong, J.T. Chang and C. Lei 944 Research in Model Testing Pier-Foundation Hysteretic Property in Passenger Dedicated Line M.B. Ding and X.C. Chen 949 Research of Automatic Positioning Technology for Dental Crowns Design Y.H. Duan, X.S. Cheng, N. Dai and T.R. Yuan 953 Research of Core Competitiveness of Zhejiang SMEs Based on Industrial Design Z.W. Jiang and M. Yang 957 Research of Inventory Routing Problem Based on Combination Auction B.F. Sun 960 Research of Multi-Scale Mechanics Behavior in Hierarchical Porous Bio-Ceramics N. Zhan, J.L. Chen and Q. Liu 964 Research of Parasite Design Model in Industrial Design P. Zi 968 Research of the CAD/CAM Technology Applications in Product Model-Making Q. Ge, Y. Wang and J.J. Ding 972 Research on Application of ERP System in Airlines H.R. Han, L.Y. Hu and F. Liu 976 Research on Binderless Tungsten Carbide Prepared by Spark Plasma Sintering X.Q. Li, Z.Y. Xiao, C. Yang and S.G. Qu 980 Research on Building Method of Knowledge Resource Cooperation Complex Network for Regional Manufacturing H.F. Zhan 985 Research on Case-Based Reasoning Parametric CAD Design System for Small Hydraulic Press Y.S. Zeng and J. Qian 990 Research on Correlation of Positioning Accuracy, Static Stiffness and Degree of Perfection of Control System for Crane G.N. Xu and H. Tian 994 Research on Cutting Remanufacture Hardness Deposited Materials in the Impactive Condition Z.Y. Wu, X.B. Liang, X.L. Tian, S. Zhang and S.H. Wang 998 Research on Detection of Micro Plastic Gear Tooth Based on Dummy Circle Scan Method Z.X. Zhang, K. Wang, X. Yang and L.Q. Chen 1002 Research on Dynamic Characteristics of Steel Bridge Deck Thin Paving X.Q. Xu, Y.Y. Ma, G.Q. Wu and X.M. Gao 1006 Research on Electromagnetic Field Analysis of Magnetic Levitation Rail Machine S.Y. Ma, P. Liao, G.Q. Wu, J.F. Mao and A.D. Jiang 1010 Research on Energy Saving Scheme of CVT in Automobile P.Y. Xi and L. Chen 1017 Research on Hydraulic Synchronous System Based on High Speed On/Off Valve Z. Liu, C.J. Liang and J.Y. Peng 1022 Research on Improving TII Performances of IEEE 1451 Smart Sensors G.J. Huang, G.X. Liu, G.X. Chen and T.Q. Chen 1027 Research on Information Integration of Production Management and Decision Information Visualization in Manufacturing Enterprises J.T. Chang, Y.Y. Qiu, X.G. Kong and S. Li 1031 Research on Inner Circle of Micro Plastic Gear Based on Sub-Pixel Location L.Q. Chen, K. Wang and L.G. Gao 1036

10 Applied Mechanics and Materials Vols i Research on Jet Electrodeposited Cu-Al 2 O 3 Nanocomposition Coatings J.S. Chen, Y.H. Huang, B. Qiao, J.M. Yang and Y.Q. He 1041 Research on Mechanism of Improving Electrical Properties of ZnO Varistor Ceramics by Laser Shock Processing R.F. Chen, Y.Q. Hua, G. Ji and Z.Z. Sun 1045 Research on Modeling of Ball-End Cutter for Virtual NC Machining J.H. Ge, P. Zhang, X.L. Sui and P. Zhao 1050 Research on Multi-Organization Collaborative Design Based on QFD J.F. Tu 1056 Research on Optimization and Debugging Simulation Model of Logistics Center Based on Neural Network C.F. Jin, H.M. Yang and L.L. Wang 1060 Research on Ordering of Organization Structure for Cooperative Product Development Based on Comentropy M. Wang, R.Y. Feng, X.M. Feng and S.J. Luo 1064 Research on Power Generation of Electroactive Acrylic Elastomer J.B. Cao, S.J. E, L.H. Zhu, A.F. Hui, X.L. Zhu and C.F. Gao 1068 Research on Risk Probability and Economic Safety Assessment Method and Application of Mechanical System G.N. Xu and X.L. Feng 1072 Research on Rocker-Style Elevator with Strong Lunar Surface Adaptability K. Li, R.Q. Liu, S.Y. Jiang and Z.Q. Deng 1076 Research on Swirl-Core Nozzle with Adjustable Spray Angle Based on Vortex Theory A.H. Bao, M.J. Yang, X. Dai, Z.Y. Qiu and S.Y. Xie 1082 Research on the Construction of Three Levels of Customization Model Based on Human Engineering W.J. An and W.M. Yang 1088 Research on the Flow Characteristics of Polymer Injection Molding under Ultrasonic Vibration and Plastics Mechanical Strength J.B. Li, K.K. Xu, X.B. Lin, X.Y. Wu and G.L. Gao 1092 Research on the Measurement System of Large Dimension Workpieces Based on the Technology of CCD and Laser X.M. Yang, Y. Wang, W.L. Zhao and L. Zhang 1101 Research on the Product Platform Life Cycle and its Management Strategies H.L. Wang, L. Hou, M. Li and S.F. Wang 1105 Research on the Regionally Clustered Manufacturing Mode Based on Flexible Configuration of Manufacturing Resources J.Q. Rong and L. Chen 1110 Research on Thermomechanical Stress of Casting Refractory and Improvement Measures C.M. Liu, Z.G. Wang and Y.R. Li 1114 Research on Torsional Vibration of the Propulsion Shafting Gear System Based on an Extended Lumped Parameter Model X. Xu and R.P. Zhou 1120 Research on V-Groove Angle of Rotated Dual-Plates Lapping Machine J.L. Yuan, W.F. Yao, Q.F. Deng and B.H. Lv 1125 Review of Nonlinear Rotor-Bearing Dynamics System X.C. Wu, B. Lin, F. Liu and X.S. Han 1130 Semi-Closed Loop Control of NC Machine Tools Based on the Displacement Error J. Gao, Q. Zhao and T. Xia 1138 Simulation about Sports Bicycle Frame Based on the Experiments J.H. Wang, J.N. Zhao, Y.S. Zhao, Z. Wang and D.L. Guo 1142 Simulation and Analysis for Spin Angle Track of the Ball Machined by Dual Rotation Plates Lapping Method D. Liu, Q.F. Deng, B.H. Lv, W.F. Yao and J.L. Yuan 1148 Simulation and Analysis of Dynamic Evolution of Electricity Market Based on Bidding Decisions with Heterogeneous Expectations M. Zhang, H.M. Yang and D.L. Yang 1153 Simulation and Analysis on the Direct Shearing of Semi-Fixed Abrasive Tool X. Ma, Q.F. Deng, B.H. Lv, Y.L. Hu and J.L. Yuan 1157

11 j Advances in Engineering Design and Optimization Simulation Modeling of the Operating Room Based on SIMIO Q. Zheng, S.F. Chen, J. Shen, Z.Q. Liu, K. Fang and W. Xiang 1162 Simulation of Load-Displacement Relationship for Specially Shaped RC Columns F.L. Qu, S.B. Zhao and S.M. Zhang 1167 Simulation of Supercritical CO 2 Extraction for Peanut Oil Based on Artificial Neural Networks J.S. Dong and B.Q. Gu 1172 Simulation of Temperature Field of Molten Steel in Mold for 700mm 700mm Billet Caster M.H. Bai, J.L. Ge and R.S. Tong 1176 Simulation of Test Loads on Aqueduct with Multi-Longitudinal Reinforced Concrete Beams S.B. Zhao, J.F. Guan and X.K. Li 1182 Simulation Research on Neural Network Sliding Mode Control of Energy-Regenerative Braking of Electric Vehicle J.B. Cao, S.J. E, X.L. Zhu, H.K. Jiang and B.G. Cao 1187 Simulation Research on Special-Section Ring Radial Rolling Technology B.S. Sun, L.T. Qi and X.D. Shu 1191 Simulation Study on Load-Sensing Hydraulic Drawing System of Coal Mining Machine T.H. Peng, M.S. Yang, X.S. Hao and J.D. Liu 1195 Situations and Development Trends of Ultrasonic Machining Tool and Ultrasonic Machining Technology Y. Yang and B. Lin 1199 Sixth Drawing Process Analysis for Electrodeposited Nickel Coating Battery Shells L.Q. Zhou, X.C. Huang and C.M. Fu 1206 Solar Cell Surface Texturing Combined Wet Etching and Ultrasonic Vibration Y. Chao, Y.T. Wu, J. Yu and L.Q. Wu 1210 Some Properties of Mathematical Model for Cylindricity Errors P. Liu and H.Y. Miao 1214 Stochastic Optimal Dispatch of Power System under Extreme Weather Disaster Y.X. Zhang, H.M. Yang, Z.Y. Dong and M.Y. Lai 1219 Strategy and Applied Research of Multi-Constrained Model of Automatic Test Paper Based on Genetic Algorithm Z.F. Liu, J. Shi, J. Liu and Y. Li 1223 Strategy for Developing Enterprise Cluster by Means of Establishing Regional Commercial Alliance L. Liu 1231 Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method Y. Wang and B. Lin 1236 Structural Design of Hoist Boom of Bracing-Hoisting-Separated Barrier-Clearing Vehicle Based on ANSYS Z.G. Zhang, X.Y. Liu and X.D. Jiang 1240 Structural Intensity Analysis of Shells Structure under Harmonic Excitation G.Y. Zeng and D.F. Zhao 1245 Study and Simulation for Optimization Plan of the Fluidization Quality of the Bulk Cement Tanker Device W.C. Pei, Y.G. Li and J. Han 1249 Study of the Influence Rules between Structural Parameters and Jet Characteristics of a Liquamatic Fire Water Monitor with Self-Swinging Device G.L. Hu, A.M. Hu and J.X. Liang 1254 Study on 3D Reconstruction and Static/Dynamic Characteristics of Human Femur L.H. Wang and G.W. Liu 1259 Study on Assessment Method and Statistical Distribution of Roundness Error A.C. Wang, L. Ji, Y.N. Teng and L. Zhang 1265 Study on CNC System of Parallel Mechanism X.Y. Zhong, Y.B. Ni, P.F. Wang and Z.Y. Yang 1273 Study on Effects of Input Rotational Speed on Output Torque of Magnetorheological Torque Servo F. Lu, D. Zheng, Y.J. Shi and B. Huang 1278

12 Applied Mechanics and Materials Vols k Study on Experiment of Drilling for Titanium Alloy Ti6Al4V H.B. Wu, Z.X. Jia, X.C. Zhang and C.G. Xu 1283 Study on Force Control in Abrasive Polishing of Aspheric Parts D. Zheng, B.D. Lv, J.M. Zhan and L.Y. Hu 1287 Study on Geometric Tolerances Information in Integrated Manufacturing Processes Y. Chao, H.F. Zhang and L.Q. Wu 1292 Study on Identification of Stable Spindle Speeds Range by Time-Varying Cutting Width in Turning X.J. Wang, J.Y. Yu and H.W. Zhao 1296 Study on Integrated Design Method Based on AD, QFD, TRIZ and Taguchi Method G.Q. Sun, G.W. Zhang, Y.L. Chen and K. Zhang 1301 Study on Mechanism of Tap Breakage in Low Frequency Torsional Vibration Tapping F.Q. Han, Z.Z. Li and D.Y. Zhang 1306 Study on Mould Heat Penetration Depth for Semi-Solid Net Shape Forming W. Liu, M.L. Zhang, Z.X. Jia and X. Ding 1311 Study on Numerical Modeling of Three Dimensional Oblique Cutting for Aluminum Alloy Cutting Process X.H. Zhang and G.H. Dai 1316 Study on Optimum Meshing Efficiency for Spiral Bevel Gears in Mixed Elasto- Hydrodynamic Lubrication J.G. Gu, Z.D. Fang and S.S. Shen 1321 Study on Profile-Adaptive Tool System for Small Robots in Large Freeform Surface Polishing Q.T. Liu, J.M. Zhan and J.H. Mao 1327 Study on the Automatic Wiring of Small Mechanical and Electrical Equipment P.J. Cao, J.Z. Quan, X.F. Li and L. Zhou 1332 Study on the Modification of Gear with Arcuate Tooth Traces Z. Min, H.L. Zhu and C. Cheng 1336 Study on the Polishing Force of Face Polishing X.C. Xu, Y.G. He and Y.M. Wang 1340 Study on the System of Impact Test in Hydraulic Impact Machine Q. Xu and Y.Y. Huang 1345 Study on the Transmissible Torque of HSK-E50 Toolholder-Spindle Interface Y. Lu, C.Q. Huang and J. Wang 1351 Study on the Wear Properties of Hydrodynamic Oil Film Bearing by Finite Element Method Y.G. Li, L. Zhu, J.M. Wang, H.L. Gui, D. Yan and Q.X. Huang 1356 Study on the Working Performance of 45# Mechanical Element with Ni-P-Co Alloy Coating X.Z. Li 1360 Study on YAG Laser Welding Process of Fe-Mn-Si Shape Memory Alloy C.Y. Zhou, C.X. Lin and L.L. Liu 1364 Study the Effect of Background Music on Cognitive Memory Q. Su and F. Wang 1368 Surface-Curve Contact in 4-Axis NC Machining of Sculptured Surfaces Using Anural Cutter H.R. Liu 1372 Surface-Surface Contact in 5-Axis NC Machining of Sculptured Surfaces Using Anural Cutter Q.H. Liu and H.R. Liu 1376 Systematic Inventive Thinking Method Based on Theory of Constraints J. Jiang and Y. Li 1380 Technological Research on Preparing the Ni Cr Cladding Layer on the Surface of Copper N.W. Liu and Y.S. Wang 1384 Ternary Regression Modeling Analysis of NC Ultrasonic Machining Efficiency G.Y. Zhong 1388 The Application and Research of Solenoid Pump in the Steam Appliances X.W. Huang, Z.B. Xie and H.J. Shen 1393

13 l Advances in Engineering Design and Optimization The Application of Slice Method in Cutting Simulation Q. Li, L. Li, J.C. Li and Y. Guo 1397 The Applied Study on Hot Runner Technology and Design of Injection Molds Y.J. Huang and G.X. Yang 1401 The Approaches of Cultivating and Improving Design Students DQ G. Liu 1407 The Build of Digitized Design and Manufacture System for NC Machine Tool P. Hu and G.F. Yin 1411 The Calculation Method of Accurate Shaping Curve of Inside Right-Angle Step in Cross Wedge Rolling R. Zhao, K.S. Zhang and Z.H. Hu 1416 The Causes and Solutions of Boiler Scale in Steam Appliances H.J. Shen and Z.B. Xie 1421 The Cleaning Mechanisms on Organic Grinding Fluid Applied for Si 3 N 4 Ceramic Grinding Z.Y. Wu, S.H. Wang, X.L. Tian and S. Zhang 1425 The Current Density and Energy Input in Electrothermal Explosion of Metallic Powders G.Y. Zhou, X.L. Dong and J. Liu 1429 The Current Situation and Progress of 4-DOF Parallel Robot Y.Q. Wang, G.Y. Zhong, Y.B. Chang and G.X. Liu 1433 The Design of Double-Helix Single-Screw Pump Based on PRO/E X.B. Huang and G. Wen 1437 The Development of Physical Signal Measurement and Control in the Processing of Ultrasonic Machining X. Zhang, B. Lin and X.S. Han 1442 The Development of Test System for Crankshaft Balancing Machine A.H. Ren, H. Zhou and C.Q. Sun 1448 The Dynamic Performance Research of Fixture for Automobile Hydraulic Vibration Reliability Test Y.S. Zeng 1452 The Effect of Cut Tool Geometric Parameters on Tool Tear of Machining Nickel-Base GH4169 Super Alloys Z.P. Hao, D. Gao and R.D. Han 1457 The Effects of the Cooling Gallery Position on the Piston Temperature Field and Thermal Stress J.X. Liu, Y. Wang and W.Z. Zhang 1462 The Evaluation of Resources and Environment Attributes of Manufacturing Process Based on Scatter Degree Combination Evaluation Method H. Zhang, X.G. Zhang and Y.H. Wang 1466 The Finite Element Simulation of Electromagnetic Powder Compaction Drive Force X. Zhou and J. Liu 1473 The Fracture Analyse of Titanium Bone Implant B.Y. Lou, C.L. Liu and B. Xu 1478 The Influence Rules of Stress about Technical Parameters on Synchronous Rolling Railway Axis with Multi-Wedge Cross-Wedge Rolling X.D. Shu, X.H. Wei, C.M. Li and Z.H. Hu 1482 The Kinematic Analysis of Heart-Shaped Gear Continuously Variable Transmission C.Q. Sun, G.X. Sun, A.H. Ren and Y.D. Liu 1489 The Lapping Experimental Research Based on Multi-Unit-Lapping Plate W. Hang, F. Jiang, Z.Z. Zhou and Y. Dai 1493 The Matching Pursuit Method for Extracting Feature Based on DT-CWT and its Application Z.X. Chen, X.D. Shu, C.L. Wang and S.K. Xie 1497 The Mechanical Analysis of an Injection Machine Clamping Unit G.Q. Yu, G. Zhang, S.F. Weng and H.B. Huang 1503 The Mode and Structural Design of Venting System for Injection Mold H.L. Li and T.X. Tang 1507 The Monitoring of Machine Tool Working State Based on Load Current Signal G.L. Yu and G.F. Li 1512

14 Applied Mechanics and Materials Vols m The NC Side Milling of the Ruled Surface of Impeller Leaf with Cylindrical Cutter H.R. Liu, Y. Lou, C. Wang and Q.H. Liu 1516 The Novel Design of Full-Balancing Mechanism for Single-Cylinder Diesel Engine B.F. Yin, J.G. He, Y. Xu and Y.Q. Li 1520 The Probabilistic Method of Failure Analysis to Transmission Facilities under Ice Storms W.J. Xu, H.M. Yang, M.Y. Lai and S. Wang 1525 The Purification Experiments of Cold Rolling Emulsion by Hydrocyclone L. Ma, H.L. Pan, H.L. Wang, Q. Yang, J.G. Wang, S.M. Wu, D.J. Xu and X.M. Xu 1529 The Quantitative Evaluation on the Lapping Uniformity of Rotated Dual-Plates Lapping Mode P. Zhao, W. Yu, K.F. Tang, B.H. Lv and J.L. Yuan 1534 The Research of Agile Manufacturing Based on Load Current of the Equipment G.F. Li, T.F. Fang and L. Luo 1540 The Research of Air Fuel Ratio Self-Learning Control Strategy Based on UEGO Sensor L. Tang, W.Q. Meng and H.Y. Gan 1544 The Research on Control of the Electronic-Mechanical CVT L. Zhang, G.N. Li, Y. Liu and N.S. Cheng 1549 The Research on Generation of Arc Face-Gears Y.M. Cui, Z.D. Fang, J.Z. Su, X.W. Cai and L.P. Wang 1553 The Research on the Microstructure and Property of Gear with Sinter Powder Material B.Y. Lou, F.L. Dong and B. Xu 1558 The Stress and Strain Analysis in the Broadening Stage of Multi-Wedge Synchrostep Rolling Railway Axle by Cross-Wedge Rolling X.D. Shu, M. Xiao, C.M. Li and Z.H. Hu 1561 The Structure Characteristics and its Product Experimental Analysis of the Cold-Rolled Production Line of Double-Line Continuous Electrolytic Pickling B.S. Xing, C. Du and X.F. Wang 1567 The Structure Design and Finite Element Analysis of the Self-Moving Silent Piler Based on the Pile Reaction Force W.B. Zhou, X.B. Ouyang and K.T. Li 1571 The Tolerance Modeling of LED Die Bonder Based on Multi-Body Systems M.F. Huang, J.T. Huang, X. Cheng, J. Zhang and H. Jing 1577 The Ultrasonic Signal Identification of the Nickel-Based Superalloy Based on the Wavelet Neural Network X. Yin and Y.P. Liu 1581 Theoretical Analysis of Granularity of Grinding Particles on Mixing Y.C. Deng 1585 Topology Optimization Design of Integral Structure of Woodworking Machine Tool Z.X. Meng, J. Cao, Z.W. Li and J.X. Zhao 1591 Topology Optimization on the Movable Platen of Plastic Injection Machine H.B. Huang and D.H. Xue 1595 Total Quality Innovation of Manufacturing Enterprises Based on Innovation Unions J.F. Tu 1600 Total-Probability Method in Reliability Design of Gear Strength Y. Li, W. Xiao, H.Y. Huang and Y.C. Yuan 1604 Unified Framework and Performance Analysis of Transaction Adjustment Models in Congestion Management of Power System Y. Wang, S. Wang and W.J. Xu 1615 Using PSO to Optimize the Performance of Timeslot Scheduling in Mesh Wireless Network J.D. Zhao, Y. Lin and J. Qin 1619 Virtual Assembly of Lathe Spindle System X.M. Li, H.J. Sun and L.H. Zhu 1625 Virtual Design for New Type Radial Telescopic Tire Building Drum Y.B. Ni, C.C. Li and Y.H. Yang 1629 Virtual Instrument for Measuring Elastic Modulus of Wood Floor D. Zhao, J.Z. Zhang and J. Zhao 1634 Walking System Design on Land Auto-Mobile Agriculture Spraying Robots C.Z. Yang and S.Q. Zhang 1638

15 n Advances in Engineering Design and Optimization Wind Load Analysis and the Structure Optimization Design of the Steel Structures with ANSYS Z.X. Meng, J.X. Zhao, S.Y. Wang and N. Zhou 1643 X-Ray Measurement for Residual Stress in Cold Ring Rolling Z.J. Zuo, W.X. Yu and J.J. Yang 1647