Engineering Design and Optimization

Transcription

1 Advances in Engineering Design and Optimization PART 1 Selected, peer-reviewed papers from the International Conference on Engineering Design and Optimization (ICEDO 2010), October 2010, Ningbo, P. R. China Edited by Yi-Min Deng and Aibing Yu Ningbo University, Zhejiang Province, P. R. China Weihua Li University of Wollongong, Australia DiZheng Ningbo Institute of Technology of Zhejiang University, P. R. China %) TRANS TECH PUBLICATIONS LTD Switzerland UK USA

2 Table of Contents Committees Preface v vii Parti A Cloth Simulation Method for Cloth/ Machinery Coupled System Unified Modeling H.Y. Yu, Y.X. Wang, S.Z. Wang and Z.F. Geng 1 A Drive-Transmission Integrated Linear Electromechanical Actuator W.J. Chen, J. Zhang and Y.Z. He 5 A Mathematical Principle and Application on Design of Planar Six-Bar Mechanism with unto Three-Ordered Intermission at Limit Position(s) H.X.Wang and N. Dai 9, A Method of Online Color-Difference Detecting Based on Image Processing and its Application L.J. ZhongandW.W. Li 14 A New Method for Accurately Evaluating Planar Straightness Error J. Yuan, Z.X. Qiu and J.W. Cao 18 A Novel CAM System with X/Y/Z 3-Axis Machines for Large Scale Aspheric Lens Grinding X.Y. Lei, H. Huang, S.H. Zhang, J. Wang, Q. Xu and Y.B. Guo 23 A Novel Feature Extraction Method Using Ant Colony Clustering Analysis D.B. Zhao and J.H. Yan 32 A Research on Transition of Urban Communities and Sustainable Lifestyle in China X.J. Zhou and X. Liu 36 A Review of Surface Texture of Tribological Interfaces Z.W. Wang, M.W. Chen, J.W. Wu, H.H. Zheng and X.F. Zheng 41 A Scheduling Algorithms ofdnc Systems Based on CAN and Program Expending Rate H.L. Cai, Z.G. Li and E.E. Ren 46 A Squeeze Casting Die Temperature Control System Based on Fuzzy Control F.Q. Yingand T.M. Guo 50 A Study on Holonic Control in Intelligent Car Y. Chao, Q.H. Lei, D.D. Fu and L.Q. Wu 55 A Study on Methodology to Collect Customer Requirements through the Internet S.L.Liu and F. Shen 59 A Study on Nanocrystalline Nickel Parts Prepared by Jet Electrodeposition J.S. Chen, Y.H. Huang, B. Qiao, J.M. Yang and Y.Q. He 64 A Web-Based Collaborative Evaluation Platform for Mechanical Conceptual Design M.Y. Wang, L.G. Shen and Y.M. Deng 68 Accuracy Analysis and Simulation of Three Degrees offreedom Parallel Machine Tool X.S. Li, J. Wang and G.Q. Cai 73 Adaptable Redesign of Existing Equipment Responding to Unanticipated Environment Changes Z.J. Liu, H.F. Teng and Q.H. Hu 77 Air-Lubricated Pneumatic Workbench C.H. Wu, S.M. Wan and B. Lin 82 An Analysis of Thermal-Structural Characteristics for Precision Linear Rolling Guide CNC Grinding Machine Tool's Bed X.L. Deng, J.Z. Fu, Y. He, Z.C. Chen and H.F. Jiao 86 An Anti-Collision Device with Circumferentially Energy Absorption under a Local Impact Q.H. Zhang, L.L. Song, C.W. Liang and D.J. Chen 90 An Attempt of Using the National Color Culture on Product Design Y.X. Zhou and L.L. Yang 94

3 X Advances in Engineering Design and Optimization An Evaluation Method of the Visual Elements of the NC Machine Operation Panel Based on RBFN X.R. Houand J.M. Che 98 An Expert System for Negative Developing Y.L. Wang and H. Wang 104 An Improved Adaptive Interpolation Scheme for NURBS Curve J.X. Chen and S.W. Lin 108 An Ontology-Enabled Production in Product Lifecycle Management J. Cui andx.b. Xu 112 An Unequal-Sized Unidirectional Loop Layout Design Problem Considering Empty Vehicle Trip Y.L. Li, B. Li and S.J. Luo 116 Analysis of Dynamic Characteristics of Rotary Mechanism for Boom Type Roadheader M. Zhang, JJ. Ren, L. Dong andx.s. Wang 122 Analysis of Dynamic Characteristics of Space Deployable Antenna Based on ANSYS D.K. Tian, R.Q. Liu, Z.Q. Deng and H.W. Guo 127 Analysis of Grinding Parameters on Hardness Layer Depth L. Zhang, X.H. Xu and C.F. Yang 131 Analysis of Heating Performances for Ultra-High Speed Electric Spindle Bearings Based on the Energy Theory oftehl in Point Contact State S.S. Li, Z.H. Hu, P. Zhou, P. Chen, X.Y. Chen, J.M. Gu and L.X. Fu 135 Analysis of Influence Parameters on Axial Movement Displacement about Cross Wedge Rolling Asymmetric Shaft Part W.F. Peng, K.S. Zhang and Z.H. Hu 141 Analysis of the Corner Error in WEDM LJ. Yang and X.A. Dang 146 Analysis on Green Design Methods in Modern Furniture J.F. Xuand H.N.Zhang 150 Analysis on the Workspace of a Tomato Harvesting Manipulator with 7 DOF X.F. Liang and Y.W. Wang 155 Analytical Robust Design of a Gear Milling Machine Headstock Y.L. Chen, S. Liu, H.T. Wang and P.H. Gu 162 Analyzing of the Thermal Stress and Fatigue Life of the Liquid Core Heavy Reduction Rolling Mill's Roller D.Y. Sun, Y.F. Zhang, X.W. Zha, W.W. Liu, H.W. Ma and Y.Q. Fan 166 Application and Analysis of RBF Neural Network for Burr Prediction in Micro-Machining Y.M. Zhu and G.C. Wang 171 Application of Analog Compound Orthogonal Neural Network to Temperature Control of Electric Heating Dryers H.L. Wei andl.g. Gu 176 Application of FEM Analysis to Fault Diagnosis of Cracked Rotor K.Yang and Y. Yang 181 Application of Maslow's Hierarchy of Needs to Modern Chinese Furniture H.N.Zhang and J.F. Xu 185 Application of the Structural Topological Optimization in the Column Stability Design B.C. Bian, G.M. Peng and Y.K. Sui 190 Application Research on Collaborative Design of Engineering Machinery Design K.X. Guo, Y. Huang and H. Zong 194 Application Study on Resonance Demodulation Technique in Fault Diagnosis of Gear Box Q. Hao, L.X. Gao, X. Wang and H. Ye 198

4 Applied Mechanics and Materials Vols xi Artificial Intelligence Application in Modern Management R. Jiang 203 Automatic Visual Inspection System of Gas Valve's External Taper Thread Based on Image Domain X.C. Zhang, X. Zhang, Y.H. Lou and J.H. Chen 207 Axis to Plane Perpendicularity Error Evaluation Based on New Generation GPS Y.H. Sun, J. Zhang, M.F. Huang, J.T. Huang and X. Cheng 213 Behavioral Characteristics Analysis and Structural Design of Conceptual Interface of Mechanical Products K. Wang andh.b. He 217 Behavioral Characteristics of Electromechanical Products and Their Representation Based on a Modified Petri Net H.B. He and K. Wang 222 Behavioral Process Characteristics ofassembly Devices and Their Conceptual Design L. Shi and Y.M. Deng 226 Biomimetic Micropore of Bearing Human Bone in the Design and Optimization Based on Finite Element Analysis and Simulation L.J. Yang, X.A. Dang, L.L. Wang and L.A. Zhou 230 Buffer Groove Design of Continuous Rotary Electro-Hydraulic Servo Motor Used in Simulator X.J. Wang, J.P. Shao and G.B. Yu 234 CAD System of the Cold Extrusion Die Based on VB S.Z. Zhou, X.M. Yuan and J. Fan 238 Calculation Method for the Theoretical Displacement of Cycloidal Pump Y.F. Wu, C.L. Xia and Y.G. Shi 242 Color Image Denoising Using Gaussian Multiscale Multivariate Image Analysis D.T. Liang 248 Computer Aided Price Quoting Package for Injection Mould Based on Standard Man-Hour Method Z.X. Jia, H.B. Wu, J.Q. Li andm.c. Fang 253 Computer Numerical Controlled Coil Winding of the Electric Welding Machine Y.Q. Wang, X.J. Wang and S.M. Hua 259 Computer Vision-Based Augmented Reality System for Assembly Interaction H.W. He, Y.M. Wu, D.T. Zheng and Y. Rao 263 Concept Design of Spraying System Based on Function Analysis of Spraying Robots W.M.Zhao and B.Hu 270 Cost Estimation Model of Modular Product Family H.L. Wang, L. Hou, C.R. Liu and Q.L. Wang 276 Cutting Process Analysis for Uniform and Variable Edge Tools Z. Li, A.B. Yu, H. Wang and L. Dong 280 Debond Propagation in Honeycomb Structure under Pure Bending Load W.R. Gong, J.L. Chen and J. Wang 284 Deflection and Stress Analysis of Glass Plate in Elastic Deformation Processing D.N. Nguyen, J.L. Yuan, B.H. Lv and Z. Wu 288 Design and Optimization of the Suspension System on the Wheel-Tracked Exploration Robot W.Y. Shang and F.J. Qiu 294 Design and Simulation of Electric Pallet Truck Hydraulic Anti-Skid System L.W. Wang, G.P. Li and L.S. Shu 299 Design Calculation about Oxynitride Concentration for Tunnels on Inghai-Tibetan Railway S.X. Sun andn.y. Yu 304 Design Intervention for Social Innovation: Two Service Design Workshops in Italy and China M.S. Gong, L.H. Zhang and X. Zhang 308

5 xii Advances in Engineering Design and Optimization Design Management and the Development of Chinese Industrial Design X. Song 313 Design of 2-DOF Micro-Positional Stage Based on Parallel Structure Using Flexible Plate H. Chun, Y.G. Cui, Y. Li and L. Qiu 317 Design of a Knowledge-Based Self-Assessment System for Enterprise Knowledge Management Evaluation Y. Xu, H.F. Zhan, J.H. Yu and L. Sun 322 Design of Forming Shape Measurement System for Laser Molten Pool in Laser Fabricating J.B. Lei, Z. Wang and L.F. Liu 327 Design of Rank Accuracy Detection System for Screw Z.X. Meng, Z.W. Li and J. Cao 331 Design of Surface Roughness Measurement Bench Based on Stewart Platform X.B. Pan, Y.M. Tang and X.J. Zhou 335 Design Research on Working Mechanism of Beam Pumping Unit J. Liu and J. Zhu 340 Design Study for Parallel Robot Based on Virtual Prototyping H.L. Chen, L.R. Hong, T.L. Wang, K.B. Lu and Y.F. Luo 344 Development of CNC Lower Pressure Water Jet Cutter D.S. Zhang, Z.W. Dong, B. Chen and L.Z. Yang 349 Development of Electromagnetic Composite Ring Expansion as a Fragile Material Test Technique G.Y. Zhou, J. Liu, X.L. Dong and F.H. Zhou 354 Deviation Control of Weld Seam Tracking Based on Laser Image Sensing L.J. Liu and Y.H.Lou 358 Dimension Classification Method ofmulti-loop Planar Mechanism D.F. Zhao and G.Y. Zeng 362 Dynamic Analysis of a Calibration Mechanism D.W. Sun, Z.G. Chen and G.Y. Zhang 366 Dynamic Characteristics Analysis for the Bed of CNC Machine Tool S.R. Zhang, X.G. Li, L.F. Yang and B. Yu 370 Dynamic Characteristics Analysis of Precision Linear Rolling Guide CNC Grinding Machine Tool's Bed X.L. Deng, J.Z. Fu, Y. He, Z.C. Chen and Z.Y. He 374 Dynamic Performance Analysis of a Machine Tool Considering Linear Rolling Guideway Y.M. Zhang, Z.K. Xie and Q.W. Liu 378 Dynamic Simulation Analysis on Flexible Assembling Fixture for Aircraft Panel Component L.G. Qu, K.Q. Pan and X. Chen 382 Effect of Specimen Ball Diameter on Contact Stress J.L. Zhou, G.Q. Wu, X.Y. Chen and W.N. Zhu 386 Effect of Ultrasonic on Properties of Electroplated Diamond Tools X.Z. Wang, A.B. Yu, B. Lin and N. Bao 390 Effect ofwheel Elasticity on Grinding Stability A. B. Yu, L. Dong and Y.L. Wang 394 Electrodeposition of Fe-Diamond Composite Material for Manufacture of Diamond Tools B. S. Pan, X.H. Fang and Y.C. Tian 398 Enterprise Cluster Entity Modeling Based on Product L. Sun, J.H. Yu, H.F. Zhan and Y. Xu 402 Evaluation of Innovation Effect of Residential Design Based on Fuzzy Comprehensive Evaluation Method A.P. Pan 407

6 Applied Mechanics and Materials Vols xiii Experiment Research on Dynamic Cutting Force and its Power Spectrum H.J. LiuandM.Min 412 Experimental Investigation and Research on Forming Process ofmicro Flat-Wire C.C. Fok, Z.N. Guo, Z.Q. Yu and J.W. He 417 Experimental Investigation on Grinding-Induced Surface Damage of Fiber Reinforced Ceramic Matrix Composites Y.S. Shi, Y.G. Wang, B. Lin and A.B. Yu 424 Experimental Study of the Small Lubrication Holes on the Die Shoulder on the Formability in Cylindrical Cup Deep-Drawing Y.Q. Shi 428 Experimental Study on High Alloy Antifriction Cast Iron in High-Speed Cutting L.J. Ma and Z.T. Zhou 432 Experimental Study on Optimizing Process Parameters in Two-Dimensional Ultrasonic Rolled Extrusion J.X. Zheng, J.J. Jiang and C.S. Liu 435 Experimental Study on Performance Characteristics of Magnetorheological Damper Z.N. Hou, Z.M. Feng, H.G. Hu and G.B. Wu 439 Experimental Study on Piezoresistivity and Magnetoresistivity of Magnetorheological Elastomers W.Q. Ye, Y.M. Deng and W. Wang 444 Experimental Study on the Fabrication of the Light Guide Plate with Hot Embossing Method Y. He, T. Zhang, J.Z. Fu and Z.C. Chen 448 Experimental System Design of Tension Measure and Control Based on MRF Damper B. Huang, D. Zheng, L.Y. Hu and F. Lu 453 Exploration of a New Leaned Blade Flat Hydrodynamic Torque Converter X.L. Zhu, C.B. Liu, W.X. Ma and X.Q. Wu 457 Failure Analysis of Hydrogen Corrosion of the Lens Gasket X.C. Ma and G.F. Xu 462 Fatigue Life Analysis of Large-Scale Liner Vibration Screener Based on ANSYS Y.Y. Wang, X.H. Fu, T.T. Guo, L. Chen and H.Q. Mao 466 Feasibility Study of Using the Chinese Traditional Five Elements Chromatology on the Industrial Design Y.X. Zhou, F. Shen and L.L. Yang 471 Feature-Based Collaborative Design in VPDM K.S. Liang, J.Z. Shang, L. Tang, Y.J. Cao and C. Cheng 475 Finite Element Analysis and Structure Optimization on Light-Duty Truck Driving Axle Housing J.S. Fu, J. Wang and J.F. Wang 482 Finite Element Analysis of Radial Bearing Magnetic Field G.Q. Wu, W.N. Zhu and J.L. Zhou 486 Finite Element Static Analysis on Heavy-Duty Truck Gearbox Housing J.S. Fu, J.F. Wang and J. Wang 491 Focus on Connotation Construction Building Engineering Training Practice Base under Local Characteristics X.W. Miao and G.F. Yuan 496 Fuzzy Reliability Optimization Design Method of Flange Based on the Tightness of Bolted Flanged Connections Z.G. Sun, B.Q. Gu and X.L. Huang 501 Geometric Error Detection and Identification of a Heavy NC Boring and Milling Machine Tool by Using Laser Tracker X.Q. Zhu, D. Gao and G.W. Cui 505

7 xiv Advances in Engineering Design and Optimization Geometric Information Measurement Based on Structured Light Z.J. Ma, N. Dai and H.H. Cui 509 Image Measurement of Roller Chain Board Based on CCD Q.M. Liu, Z.K. Liu, Q.H. Lei and K. Zhang 513 Improved Sensing Block Method and its Application in Measurement of Dynamic Load H.L. Yuan, X.L. Dong and J. Yang 517 Improving the Quality in Deep Drawing of Rectangle Parts Using Variable Blank Holder Force Y.Q. Shi 521 Inclination Errors Evaluation of Planar Lines with a Chaos Optimization K. Zhang and X.M. Cao 525 Influence Factor Analysis for Tension Control Based on MRF Damper L.Y. Hu, D. Zheng, J.M. Zhan and Y.M. Deng 529 Influence of Bolted Joint on Dynamic Characteristics of Combined Three-Section Crossbeam T.N. Guo, D.L. Guo, L.G. Cai, B. Song and J.N. Zhao 534 Influence of Direct Current Magnetron Sputtering Parameters on Electrical Properties of Copper Films Y.Q. Hua, R.F. Chen, Z.X. Niu and J. Yu 540 Influence of Micro Trapezoidal-Groove on Behavior of Sliding Tribopairs P.Y. Zhang, Y.H. Zhang, X.L. Wang, X.J. Hua and Y.H. Fu 544 Influence of Reground Tool Sharpness on Micro-Cutting Process X.L. Tian, Z. Li, X.J. Tang, F. Guo and A.B. Yu 550 Influence of the Position Deviation of Rotated Dual-Plates Lapping on Sphere P. Zhao, H.W. Fan, J.J. Chen, J.L. Yuan, B.H. Lv and Q.F. Deng 554 Injection Molding Flow Simulation of Thin-Walled Slender Tube and Optimization of Combined Cavity J. Liu, G.M. Wang and B.S. Sun 559 Injection Molding Process Optimization of Multi-Objective Based on MUD-RBFNN-GA B.S. Sun, Z. Chen, B.Q. Gu and X.D. Huang 564 Injection Molding Process Parameter Optimization for Warpage Minimization Based on Uniform Design of Experiment B. S. Sun, Z. Chen, B.Q. Gu and X.D. Huang 570 "Inside & Outside"-Design Method for Small and Medium-Sized Enterprises X.C.Wang and K.J. Shi 576 Intelligent Control System for Ceramics Ball Test Rig J.L. Zhou, J.C. Chen, G.Q. Wu and X.Y. Chen 580 Intelligent Prediction for Surface Roughness ofcnc Surface Grinding Machine Tool Based on Bayesian Network H.F. Jiao, J.Z. Fu, Y. He and X.L. Deng 584 Inter-Enterprise Quality Information Dynamic Tracking Based on Process Quality BOM L.P. Zhao, Y.Y. Yao and D.M. Xu 589 Investigation into Fluid Velocity Field of Wedge-Shaped Gap in Grinding C. H. Li, Z.L. Han and J.Y. Li 593 Investigation of SPR Mechanical Performance with Aluminum Alloy Sheet J.H. Zhao, S.M. Wan and S.Y. Li 599 Joint Detail Simulation by Beam Element in Vehicle Body W.B. Hou, H.Z. Zhang, P, Hu and X.C. Pan 603 Kinetics Analysis and Simulations on Load Fork Mechanism in Forward-Type Stacker J.Y. Bai, S.L. Tong, Z.H. Yu and D. Zheng 608 Loading Behaviors of Superposed Aqueduct Affected by Segregating Layer Between PPCBs and Cast-Jn Situ RCF S.B. Zhao, S.W. Pei, Y.W. Wang and X.J. Liang 614

8 Applied Mechanics and Materials Vols xv Manufacturing and Green Estimation of Composite Concrete Machine Tool Bed J.M. Ding and C.Su 619 Manufacturing Process for Circular-Arc Curvilinear Cylindrical Gears with Predesigned Fourth Order Transmission Error J.Z. Su and Z.D. Fang 623 Mechanical Analysis and Optimum Design of Universal Panel Construction Formwork System K. Wang, X.T. Wang, M. Qu and X.D. Chen 628 Mechanism of Zn Vapour Suppressed by Al In Laser Lap Welding of High Strength Zinc Coated Sheet Steel S.Q. Zhou and Z.G. Peng 634 Mesh Analysis and Realization of Gear Honing with Globoid Honing Worms on Gear Hobbing Machine T. Yu, K. Dong, S.Y. Wang and Y.X. Qian 643 Microscopy Photoelasticity for Studying Crazes in Polycarbonate Z.T. Wang, J.L. Chen and R.C. Wang 648 Microstructure and Interface Strength of MMCs Prepared by Pressureless Ni-Induced Infiltration Using Fe Alloy S.F. Yang, W.P. Chen, M.Y. Han and D.Z. Zhu 652 Microstructure and Wear Resistance of Laser Remelted Boronizing Layer of Petrochemical Key Parts S.F. Chen, IB. Lei and X.B. Liu 658 Microstructure Design with Generalized Shape Optimization Based on Level Set Geometrical Description and X-FEM K.P. Qiu and W.H. Zhang 662 Mixed Natural Neighbor Galerkin Method for 3D Couple-Stress Elasticity K. Wang, S.J. Zhou and Z.F. Nie 667 Model Analysis of Gilling Machine X.G. Liu, B. Lin and K. Chen 671 Model and Algorithm of JIT Purchase Based on Actual Freight Rate W.M. He, Y.H. Hu and L.L. Guo 675 Modeling and Simulation of Rotated Dual-Plates Ball-Lapping J.L. Yuan, Y.L. Hu, B.H. Lv, Q.F. Deng and X. Ma 679 Modeling and Simulation of Rural Two-Direction Logistics System Based on Stochastic Petri Nets K. Nie, M.Y. Lai, W. Li and E.B. Cao 684 Modern Logistics Service Quality Evaluation Index Selection and Empirical Research Z. Yang 688 Modular-Based Platform Planning for Product Family L. Fan, L.P. Zhao and Y.Y. Yao 693 Multi-Attribute Decision Making Method Based-On Information Axiom with Incomplete Information for Functional Requirements X.F. Cheng 697 NC-Electrochemical Contour Evolution Machining for Globoidal Indexing Cam X.F. Tang and W. He 702 Network Failure Model Approach Based on FMEA Z.H. Sun, C. Chen, H.B. Shan and S.H. Zhou 706 Ni-Doping Alumina Foams for Fabricating MMCs by Pressureless Infiltration Using Fe Alloy S.F. Yang, W.P. Chen, M.Y. Han and D.Z. Zhu 712 Noise Radiation Analysis of Structural-Acoustic Coupling System of a Gear Box J.X. Zhou, G. Liu and S.J. Ma 718

9 xvi Advances in Engineering Design and Optimization Numerical Analysis of Pressure Straightening Process to High Pressure Boiler Tube Y.Q. Tian, Q.X. Huang and IB. Li 723 Numerical Fitting of Processing Load and Downward Movement of Semi-Fixed Abrasive Plate X. Lv, J.L. Yuan and CD. Lu 727 Numerical Simulation of Cutting Force and Temperature Field in High Speed Machining of Titanium Alloys CM. Yan and Y.X. Lin 731 Numerical Simulation of Gas-Particle Two Phase Flow in the Process of Cold Spraying Aluminum Zinc-Base Alloy Powder C.S. Liu, J.W. Cheng and J.X. Zheng 735 Numerical Simulation of Oil Mist Process in Cold Heading Machine G. C. Xu, Q.X. Hu, L.M. Li and C.X. Dai 739 Numerical Simulation on Oil-Flow-State of Gap Oil Film in Sector Cavity Multi-Pad Hydrostatic Thrust Bearing X.D. Yu, X.L. Meng, H. Jiang, X.Z. Lou, B. Wu, H.J. Xiang, X.Z. Sun, CQ. Yang and J.F. Wang 743 Numerical Study of Volute Casing for PIV Measurement by Using FLUENT and ABAQUS Software C.L. Shao, B.Q. Gu and X.L. Huang 748 Numerical Study on Solidification Process and Shrinkage Porosity for Engine Block Casting J.X. Liu, R.D. Liao and Z.X. Zuo 753 On Matrix Unit Test Plan for Testing of Product Properties Z.B. Xie and L. Shi 757 On Product Refinement Design and Prototype Test Z.B. Xie and L. Shi 761 On the Methods for Evaluating Product Concept Design Z.B. Xie and L. Shi 765 One-Step Alcohothermal Synthesis and Growth Mechanism of NiSe2 Porous Octahedron Y.H. Zhu, J.J. Ma and Q. Yang 769 On-Machine Profile Measurement ofarc Grinding Wheel in 3-Axis Machine Using Non- Contact Displacement Sensor H. Huang, X.Y. Lei, Q. Xu, Y.B. Guo and W. Luo 773 Optimal Dispatch ofpower System with Stochastic Wind Generation S. Wang, H.M. Yang, S. Zuo and W.J. Xu 783 Optimization and Improvement of the Characteristic of Material Flow of Mixer Truck Assembly Line G. G. Zhang, Z.B. Chang and H.R. Zhang 787 Optimization Design of Powder Molding Pressing Frame Based on Precision Effect J. Liu, X.L. Dong and G.Y. Zhou 791 Optimization Design of the Secondary Calibration of Line Structured Light Vision System K. Zhang, X.S. Cheng, N. Dai and H.H. Cui 797 Optimization for Spindle of Jade Carving Machine Based on Fuzzy Reliability Theory H. R. Shi and Y.N. Rui 801 Optimization for the Connection Parameters of HSK Tool Shanks F. Liu, B. Lin and Y.M. Gong 806 Optimization of Collaborative Scheduling in Supply Chain Z.Z. Zheng and Y.H.Hu 810 Optimization of Maximum Entropy Model Oriented to Bayes Prior Distribution Based on PSO Y. Dai, Z.M. Wang and G. Ling 814 Optimum Design of Flat End Face Mechanical Seal Based on Coupling Analysis J.F. Zhou, B.Q. Gu and C.L. Shao 819

10 Applied Mechanics and Materials Vols xvii Output Tracking Control and Synchronization of Continuous Chaotic Systems Using Differential Evolution Algorithm S.B. Liu, S.M. Zhou and L.Y. Hu 823 Parameter Optimization and Design of Radial Telescopic-Type Tire Building Drum W.D. Sun, Y.B. Ni and Y.H. Yang 829 Parameter Optimization for a Polymer Electrolyte Membrane Fuel Cell Model X. Li, Q. Yan and D.T. Yu 834 Parameter Optimization for Oil/Air Lubrication of High Speed Ceramic Motorized Spindle without Bearing Inner Rings S.H. Li, Y.H. Wu and K. Zhang 839 Parameter Optimization of Laser Scribing Technics of 30Q130 Grain-Oriented Silicon Steel Based on Genetic Neural Network Y. Huang, Y. Liu and G.L. Zhu 844 Parameters Design and Motion Analysis of Rolling-Cut Shears D.Y. Sun, Y. Zhao, J.D. Peng, C.S. Xu, C.G. Dong, J. Wang and R.M. Mei 849