Strongweld. Product Catalogue

Transcription

1 Product Catalogue

2 Product Catalogue Strongweld continues the path initiated by INDURA and its team. The quality of our products and the devotion of our people provide our distributors with the assurances that choosing Strongweld will guarantee the Ultimate Welding Performance

3 Product Catalogue Strongweld Ultimate Welding Performance Because we really care...

4 Product Catalogue WELDING EQUIPMENT & SUPPLIES MMA OR SMAW STICK ARC WELDING

5 Strongweld 6010 AWS E-6010 Product Mild Catalogue Steel Electrodes Strongweld 6013 AWS E-6013 Description: carbon steel electrode with iron powder coating for greater disposition rate and easier implementation, along with outstanding mechanical properties. DC+. All Position. The arc stability and protective shield help direct the deposit reducing undermining. RED Description: carbon steel electrode with potassium rutile coating designed for AC and DC in both polarities. An all position electrode characterized by easy slag removal and a smooth and stable arc. In vertical welding, it is recommended to use upward progression. BLUE Tensile Resistance 72 ksi AWS: 62 ksi Tensile Resistance 75 ksi AWS: 62 ksi Fluency Limit Elongation in 2in 60 ksi 26% AWS: 48 ksi AWS: 22% Certifications: ABS, Lloyd Register, Germanischer Lloyd Fluency Limit Elongation in 2in 62 ksi 28% AWS: 48 ksi AWS: 17% Certifications: ABS, Lloyd Register, Germanischer Lloyd &CWB Typical Applications: broad scope electrode specially, when welding in all positions. Ideal for tanks, pipes, pressure vessels and pipes, structures, boats and galvanized plates. Typical Applications: broad scope electrode specially, when welding in all positions. Ideal for tanks, pipes, pressure vessels and pipes, structures, boats and galvanized plates. Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / / Strongweld 6011 AWS E-6011 Strongweld 6027 AWS E-6027 Description: carbon steel electrode with potassium cellulosic coating designed for AC use but, it can also be used with DC+. An all position electrode with rapid solidification of the weld to facilitate vertical and overhead welding. Arc easily handled to get high deposition rates. WHITE Description: mild steel electrode with iron powder coating designed for AC and DC in both polarities. An electrode for flat an horizontal position with high deposition rates-way over conventional electrodes-with minimum dilution, smooth bead appearance and solid arc. BRICK Tensile Resistance 72 ksi AWS: 62 ksi Tensile Resistance 71 ksi AWS: 60 ksi Fluency Limit Elongation in 2in 61 ksi 27% AWS: 48 ksi AWS: 22% Certifications: ABS, Lloyd Register, Germanischer Lloyd &CWB Fluency Limit Elongation in 2in 56 ksi 28% AWS: 48 ksi AWS: 22% Certifications: ABS, Lloyd Register, Bureau Veritas Typical Applications: broad scope electrode specially, when welding in all positions. Ideal for tanks, pipes, pressure vessels and pipes, structures, boats and galvanized plates. Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter 3/32 1/8 5/32 3/16 Length 12in Min Amp Max Amp sticks/lb Typical applications: steel profiles, gas cylinders, ship decks, heavy structures, truck rims. Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp 3/32 12in / / / sticks/lb

6 Strongweld 7014 AWS E-7014 Product Mild Catalogue Steel Electrodes Strongweld 7018RH AWS E-7018 Description: carbon steel electrode with rutile and iron powder coating designed for AC or DC in both polarities. An all position electrode characterized by greater weld speeds than conventional types (6013) and has very low loses by splattering. BROWN Description: mild steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with low hydrogen content and resistant to humidity designed for welds that require severe radiographic tests. Smooth arc and low boss by splattering. GRAY Tensile Resistance 77 ksi AWS: 71 ksi Tensile Resistance 78 ksi AWS: 71 ksi Fluency Limit 67 ksi AWS: 58 ksi Certifications: ABS, Lloyd Register and CWB Fluency Limit 65 ksi AWS: 58 ksi Certifications: ABS, Lloyd Register, GL and CWB Elongation in 2in 30% AWS: 17% Elongation in 2in 30% AWS: 22% Typical Applications: all kind of mild steel structures, specially, in descendent vertical welds in thin sheets. Typical Applications: recommended for jobs requiring high radiographic quality, particularly in boilers and pipes. Good physical properties make it ideal for use in shipyards. Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / / Strongweld 7024 AWS E-7024 Strongweld 7018/1 AWS E-7018-A1 Description: mild steel electrode with rutile and iron powder coating designed for AC or DC in both polarities. Flat and Horizontal position electrode for mild or carbon steel. It has a deposition rate that doubles that of the conventional electrode. Easy slag removal. GRAY Description: mild steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with low hydrogen content and easy slag removal designed for welds that require severe radiographic tests. Smooth arc and excellent presentation. GRAY Tensile Resistance 83 ksi AWS: 71 ksi Tensile Resistance 83 ksi AWS: 71 ksi Fluency Limit 69 ksi AWS: 58 ksi Certifications: ABS and CWB Fluency Limit 69 ksi AWS: 58 ksi Certifications: ABS, Lloyd Register and CWB Elongation in 2in 24% AWS: 17% Elongation in 2in 31% AWS: 22% Typical Applications: mild steel although also may be used with many low alloys and medium carbon. It provides greater economy in filling welding of one or more layers. Typical Applications: recommended for jobs requiring high radiographic quality: structural fabrication, buildings, ship repairs, oil platforms and pipes. Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / /

7 Strongweld 7018 GOLD AWS E H4 Product Mild Catalogue Steel Electrodes Strongweld 8018/B6 AWS E-8018-B6 Description: carbon and low alloy steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with high tenacity at low temperatures. High radiographic quality deposit. Easy slag removal. Excellent operative characteristics. Low hydrogen content <4ml/100gr. BEIGE. Description: basic electrode with stable arc and spray transfer. All position, DC Positive. Good resistance for high sulfur environments inside pipes and boilers. Specially designed for pipe fabrication and repairs at high temperatures: up to 1,110F. BEIGE Tensile Resistance 78 ksi AWS: 71 ksi Fluency Limit 65 ksi AWS: 58 ksi Elongation in 2in 30% AWS: 22% Typical Applications: structural building, ship repair, oil platforms, pressure pipes. Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Certifications: ABS, Lloyd Register, GL and CWB Tensile Resistance Fluency Limit Elongation in 2in 102 ksi 86 ksi 19% AWS: 80 ksi AWS: 67 ksi AWS: 17% Typical Applications: cracking equipment in oil and petrochemical industries, hardfacing for carbon or alloy steels, chromiummolybdenum steels. ASME IIC SFA 5.5/AWS A5.5 Packaging: 2lb & 5lb alum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Certifications: ABS, Lloyd Register and CWB Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / Strongweld 8018/B2 AWS E-8018-B2 Strongweld 8018/B8 AWS E-8018-B8 Description: low alloy steel electrode with low hydrogen iron powder potassium coating designed for DC positive. All position electrode with low hydrogen that prevents cracking of the cord and the heat affected zone when welding high strength steels. WHITE Description: basic electrode with stable arc and spray transfer. All position, DC Positive. Good resistance for high sulfur environments. Specially designed for pipe fabrication and repairs at high temperatures: up to 1,110F. Good for welding creep resistant steels alloys. BEIGE Tensile Resistance 97 ksi AWS: 80 ksi Tensile Resistance 103 ksi AWS: 80 ksi Fluency Limit 83 ksi AWS: 67 ksi Certifications: ABS, Lloyd Register and CWB Fluency Limit 86 ksi AWS: 67 ksi Certifications: ABS, Lloyd Register and CWB Elongation in 2in 23% AWS: 19% Elongation in 2in 21% AWS: 17% Typical Applications: chromium-molybdenum steels where high mechanical strength is required like oil platforms, shipbuilding, high pressure columns, thermoelectric plants and refineries. Typical Applications: cracking equipment in oil and petrochemical industries, hardfacing for carbon or alloy steels, chromiummolybdenum steels. ASME IIC SFA 5.5/AWS A5.5 Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / /

8 Strongweld 8018/C1 AWS E-8018-C1 Product Mild Catalogue Steel Electrodes Strongweld 9018/B3 AWS E-9018-B3 Description: low alloy steel electrode with low hydrogen iron powder potassium coating designed for DC positive. All position electrode with 2.5% Nickel which gives excellent mechanical properties in welds requiring resistance to low temperature impact. WHITE Description: low alloy steel electrode with low hydrogen iron powder potassium coating designed for DC positive. All position electrode with special alloys and excellent radiographic quality, specially suited for high temperature welds up to 1,100F. WHITE. SPECIAL ORDER Tensile Resistance 88 ksi AWS: 80 ksi Tensile Resistance 95 ksi AWS: 90 ksi Fluency Limit Elongation in 2in 75 ksi 26% AWS: 67 ksi AWS: 19% Certifications: ABS, Lloyd Register, Germanischer Lloyd and Nippon Kaiji Kyokai Fluency Limit Elongation in 2in 82 ksi 26% AWS: 77 ksi AWS: 17% Certifications: ABS, Lloyd Register, Germanischer Lloyd and Nippon Kaiji Kyokai Typical Applications: designed for fine grain steels (ASTM A 516 Gr 70) as well as fine grain steels for cryogenic applications where impact resistance is required. Refineries, pressure vessels for liquefied gases, heavy equipment, structures subject to low temperatures. Typical Applications: designed for fine grain steels used in high temperature applications. Recommended for high tensile steel welding, low micro alloys micro-alloyed with each other or with lower strength. ASTM A 633 Gr.E ASTM Gr. H75, H80, J80 and J90 Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / / Strongweld 9018/M AWS E-9018-M Strongweld 10018/M AWS E M Description: low alloy steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with special alloys and excellent radiographic quality, specially suited for high temperature welds up to 1,100F. WHITE. SPECIAL ORDER Description: low alloy steel electrode with low hydrogen iron powder coating designed for DC positive. All position electrode with a high deposition rate and allows high mechanical strength joints. Outstanding radiographic quality. GRAY. SPECIAL ORDER Tensile Resistance 97 ksi AWS: 90 ksi Tensile Resistance 113 ksi AWS: 110 ksi Fluency Limit Elongation in 2in 82 ksi4 25% AWS: 77 ksi AWS: 17% Certifications: ABS, Lloyd Register, Germanischer Lloyd and Nippon Kaiji Kyokai Fluency Limit Elongation in 2in 104 ksi 23% AWS: 99 ksi AWS: 20% Certifications: ABS, Lloyd Register, Germanischer Lloyd and Nippon Kaiji Kyokai Typical Applications: it requires careful control of the humidity in the coating or another hydrogen source. Fine grain high tensile steels in high temperature. ASTM A 633 Gr. E, ASTM A 672 Gr. H75, H80, J80 AND J90. Typical Applications: highly efficient welds in low alloy and high strength steel (military specs). T1, HY80, ASTM Gr. A514, A517 steel structures, mechanical shovels, armored vehicles, mill shells, heavu machinery chassis, SAE 4130, 4140, 4340 steels. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / /

9 BUILD-UP 24 Product Maintenance Catalogue Electrodes BUILD-UP 4340 Description: filling of carbon steel and low alloy steel. Base for hard coating. Machinable deposits. Good resistance to compression. Specially designed for reconstructing parts of carbon and low alloy steel where machinable recharge is required. AC or DCPE. Description: electrode for filling parts of carbon steel and low alloy steel. Surface coating, metal-metal wear. Machinable deposits. Good resistance to compression and wear. AC or DCPE. C 0.12% Cr 1.05% C 0.38% Cr 1.10% Mn 0.40% Ni 0.01% Mn 0.74% Ni 2.25% Si 0.29% Mo 0.01% Si 0.20% Mo 0.28% Typical Applications: final layer of axes, gears of slow turning wheels, rail guides, bulldozers. Typical Applications: blocks of arrays, crane wheels, couplings, mechanical shovels, mining machinery. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB HB one and two layers recently welded. ASTM A 36 steel Hardness HRc HRc one and two layers recently welded. ASTM A 36 steel BUILD-UP 28 ANTIFRIX 350 Description: electrode for filling parts of carbon steel and low alloy steel. Base for hard coating. Deposit is machinable and resistant to cracking. AC or DCPE. Description: electrode for filling parts of carbon steel and low alloy steel. Base for hard coating. Deposit is machinable and highly resistant to metal-to-metal wear. AC or DCPE. C 0.20% Cr 0.90% C 0.22% Cr 2.27% Mn 1.00% Ni 0.30% Mn 0.40% Ni 0.01% Si 0.40% Mo 0.40% Si 0.30% Mo 0.04% Typical Applications: specially designed for apps in worn surface reconstruction that requires greater impact and compression resistance, and whose deposits are to be machined: tips of axes, track links, gears, pulleys. Typical Applications: specially designed for apps in worn surface reconstruction that requires greater impact and compression resistance, and whose deposits are to be machined: tips of axes, track links, gears, pulleys. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB HB one and two layers recently welded. ASTM A 36 steel Hardness HB HB one and two layers recently welded. ASTM A 36 steel

10 ANTIFRIX 450 Product Hardfacing Catalogue Electrodes OVERLAY 60 Description: rutile electrode for hard coating. Ideal as base for hard coating of greater hardness. Deposit can be worked with appropiate tools. AC, DCPE. Description: coating for surfaces subject to high abrasion wear and impact. High hardness at elevated temperatures. Excellent resistance to compression. Deposit not machinable. High Alloy content electrode that offers a great set of properties. AC, DCPE. C Mn Si 0.09% 0.50% 0.20% <0.01% <0.01% Typical Applications: mill wheels, valve seats, pistons, farm machinery. Excellent for moderate impact and metal-to-metal wear. Cr Ni Mo 4.5% C 3.40% Cr Mn 1.70% Ni Si 0.55% Mo Typical Applications: screw conveyors, cement plant, mill hammers. 31.0% 0.20% 0.50% Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HRc HRc one and two layers recently welded. ASTM A 36 steel Hardness HRc 48-61HRc one and two layers recently welded. ASTM A 36 steel ANTIFRIX 550 OVERLAY 62 Description: rutile electrode for applications as hard coating. It is excellent for surfaces subject to extreme wear. AC, DCPE. C Mn Si 0.60% 0.30% 0.35% 0.48% 0.55% Typical Applications: bulldozers, shovels, feed screws or any application subject to extreme wear. Cr Ni Mo 6.70% Description: base coating for surfaces subject to high abrasion wear and impact. High hardness at elevated temperatures. Excellent resistance to compression. Deposit not machinable. High Alloy content electrode that offers a great set of properties. AC, DCPE. C Mn Si 5.00% 3.22% 2.82% 0.14% 0.91% Typical Applications: specially designed for tough and hard fillings in earth movement equipments: loader buckets, crushers, hammer mills, crusher sheets, feed screws. Cr Ni Mo 35.0% Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HRc HRc one and two layers recently welded. ASTM A 36 steel Hardness HRc 55-63HRc one and two layers recently welded. ASTM A 36 steel

11 OVERLAY 65 Product Hardfacing Catalogue Electrodes WELDMANG 14 Description: coating for surfaces subject to high abrasion wear and impact. High hardness at elevated temperatures. Excellent resistance to compression. Deposit not machinable. High C-Cr-Mo alloy content that offers high resistance to extreme wear. It is recommended the use of electrode e as base. AC, DCPE. Description: manganese austenitic steel electrode, AWS type EFeMn-B. Suitable for joining, filling and coating of Mn steel parts Hadfield type. High resistance to wear by impact and compression. During the welding process the workpiece temperature must be mantained under 482F (250C). AC, DCPE. C 4.55% Cr Mn 1.41% Ni Si 2.69% Mo Typical Applications: cast tanks, converters, mill ovens % 7.76% 2.36% C Mn Si 0.50% 15.5% 0.13% 0.07% 1.00% Typical Applications: repair of cast manganese steel, rollers, crushers. Specially designed to repair defects of cast. Cr Ni Mo 0.04% Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HRc HB HRc HB one and two layers recently welded. ASTM A 36 steel Hardness HB HB one and two layers recently welded. ASTM A 36 steel OVERLAY SUGAR WELDMANG CROM Description: manganese austenitic steel electrode, AWS type EFeMn-A. High resistance to wear by impact and compression. Suitable to join, fill and coating in all manganese steel. During the welding process the workpiece temperature must be mantained under 482F (250C). AC, DCPE. Description: hard coating carbon-chromium alloy electrode specially designed to be applied over cast iron, ductile cast and cast alloys. Also for low and mid alloy steels. DCPE. C 0.78% Cr 4.16% Mn 14.47% Ni 2.50% Typical Applications: sugar cane mills as the surface characteristics of the deposit allow for easier transport of the cane and increase the rate of extraction for juice. Si 0.19% Mo Typical Applications: repair cast manganese steel: rollers, crushers. 0.02% Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HRc one and layer recently welded. ASTM A 36 steel Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB HB one and two layers recently welded. ASTM A 36 steel

12 WELDMANG CAST Product Hardfacing Catalogue Electrodes SUPER ALLOY Description: manganese austenitic steel electrode, AWS type EFeMn-B. High resistance to wear by impact and compression. Suitable to join, fill and coating Hadfield-type manganese steel work pieces. During the welding process the workpiece temperature must be mantained under 482F (250C). AC, DCPE. Description: an electrode for welding dissimilar and difficult steels. High toughness and mechanical resistance. Great resistance to corrosion, temperature and impact. Ideal base for hard facing with great deposit rate. Specially designed to bond different types of steel, like those present in tools or cast, with excellent resistance to cracking. Also use as intermediate layer in worn carbon steel pieces, before applying the hard facing. AC, DCPE. All Position. C 0.50% Cr 0.04% Mn 15.50% Ni 0.07% C 0.098% Cr 29.09% Si 0.13% Mo 0.01% Mn 1.10% Ni 9.51% Typical Applications: repair cast manganese steel: rollers, crushers. Si 0.738% Fe - Mo 58.5% % Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB HB one and two layers recently welded. ASTM A 36 steel Typical Applications: recommended to join, fill and repair carbon and mild steel, austenitic manganese steel, stainless steel among others. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB Traction Resistance: 120 ksi one layer recently welded. ASTM A 36 steel ALLOY 160 GREEN ALLOY 29 Description: for welding, joining and filling of manganese steel and carbon steel parts. Resistant to deformation under load. It is a high alloy and performance electrode with high resistance strength to wear. AC, DCPE. All Position. C Mn Si 0.80% 3.50% 0.50% 8.60% balance Typical Applications: buckets plating, engine seats, base for hard coatings. Cr Ni Fe 20.0% Description: this electrode provides beads with outstanding finishing, ideal to be machined. The bead is extremely easy to control, even in difficult field conditions. A new high-alloy formulation makes possible bonding or coating, eliminating compatibility issues in a wide range of steels with dissimilar characteristics either by chemistry, thermal treatment or mechanical properties. A careful selection of ingredients provides for easy slag removal. AC, DCPE. All position. Typical Applications: recovering pieces or components in heavy machinery. One of the most versatile electrodes in the industry that can be used as intermediate layer before hard coating, for pieces subject to corrosion attack and it has above excellent impact and thermal resistance, even to sudden thermo shock. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB HB one and two layers recently welded. ASTM A 36 steel Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HB Traction Resistance: 116 ksi one layer recently welded. ASTM A 36 steel

13 BORIUM SPECIAL Product Catalogue Hardfacing -Electrodes 2014 COBALT HR 21 Description: coating for surfaces subject to abrasion or friction. Rods for oxyacetylene welding application. Electrode for electrical appliances. It is composed of a tube of mild steel with tungsten carbide crystals, evenly distributed inside. As tungsten is one of the hardest materials known, it gives the deposit high wear resistance. AC, DCPE. Description: Machining is difficult. Cobalt base alloy with Cr-Ni-Mo designed for coating and recovery of parts subject to metal-metal wear at high temperatures. It has good strength and toughness even at high temperatures up to 1,922 F (1,050C). AC, DCPE. C 0.30% Cr 28.0% Mn 0.60% Ni - Fe 2.70% % Si 0.80% Mo - Co 4.50% - balance Typical Applications: drill bits, cement industry machinery, snow chains or dredging, crushing teeth. Typical Applications: hot die, valve seats, steel pistons, hot work tools. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness HRc HRc one and two layers recently welded. ASTM A 36 steel Hardness 32 HRc 48 HRc one and two layers recently welded and hardened by work COBALT 6 To preserve quality and minimize waste or need for conditioning, Strongweld electrodes come in 2lb and 5lb vacuum aluminum bags. The 10lb canisters and 50lb boxes carry two and ten 5lb vacuum aluminum bags inside too. More effective, more convenient. Description: Cobalt-based electrode or rod (AWS ECoCr-A) for coating surfaces exposed to abrasion and corrosion at high temperatures. Machinable and free of crack deposits. This molten alloy can be applied as a base rod for oxyacetylene welding, TIG or as coated electrode for welding with DC. In cobalt-chromium-tungsten base, this non-ferrous alloy retains its strength under conditions of severe temperatures. AC, DCPE. C 1.27% Cr - W 28.7% % Mn 0.04% Ni - Fe 2.60% % Si 1.22% Mo - Co 4.50% - balance Typical Applications: valve seats, driving wheel billet, steel piston, oxy-petrol burners. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Hardness 38 HRc 46 HRc one & two layers recently welded, hardened by work

14 NICROELASTIC 46 AWS ENiCrFe-3 Product SPECIAL Catalogue Nickel -Based 2014 NICROMO 3 AWS ENiCrMo-3 Description: Nickel-based electrode with high chromium and niobium. Specially designed to provide high mechanical strength welds and toughness. It has outstanding elasticity being ideal for ductile demand. AC, DCPE. Flat, Horizontal & Vertical Position. Description: Nickel-based electrode characterized by producing a smooth and stable arc of spray transfer. The deposit has excellent appearance and easy slag removal. Resistant to high temperatures 2,010F (1,100C) for extended periods, in addition to resistance to stress corrosion and hot cracking. AC, DCPE. Flat & Horizontal Position. GRAY Tensile Resistance Elongation in 2in 99 ksi 43% AWS: 79 ksi AWS: 30% Certifications: ABS, Lloyd Register Typical Applications: high chromium alloys (type 600 and 400), low, medium and high steels and carbon steels up to 9% Ni. Suitable for parts subject to cryogenic temperatures and high temperatures in corrosive environments: tanks, dissimilar joints (carbon-stainless), heat exchangers, chemical and oil industry, Inconel 600 and Incoloy 800. Tensile Resistance Elongation in 2in 115 ksi 30% AWS: 110 ksi AWS: 30% Certifications: ABS, Lloyd Register Typical Applications: joining of alloys type Inconel 625 and Incoloy 825. Joints of high chrome-nickel alloys or with stainless steel. Tanks for cryogenic transport, storage tanks for Ni steels (5%-9% Ni), valve seat, machinery repair, tanks for corrosive products, 904 and 904L alloys. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / / Strongweld 13-4 AWS E410 NiMo-16 Description: synthetic electrode for austenitic stainless steel, similar to E410 but deposit contains less Cr and more Ni. The goal is to eliminate ferrite in the microstructure due to its adverse mechanical effects, providing better cracking resistance. DCPE. All Position. Tensile Resistance 120 ksi AWS: 110 ksi Fluency Limit n/a n/a Certifications: ABS, Lloyd Register Elongation in 2in 17% AWS: 15% Typical Applications: very appropriate for Pelton, Francis and Kaplan wheel turbines. Stainless steels 403, 405, 410, 410S, 414, 416, 420 and ASTM A240 (type CA6NM). UNS No. S Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb 3/32 12in / / /

15 COLD CAST 77 AWS E-St Product Cast Catalogue Iron Electrodes NI 55 AWS ENiFe-Cl Description: mild steel core with a cinnamon coating that acts as flux controlling the arc. It has a melting point low enough to allow use of low currents, an important feature in the welding of cast iron as it reduces hardening in the fusion point. AC, DCPE. All Position. Description: nickel-iron deposit specially designed for joining and repair cast iron pieces with high percentage of phosphorus, nodular and spheroid cast iron without preheating. Deposit has high strength, excellent appearance free of cracks and porosity. AC, DCNE. All Position. C 0.10% Si - P 0.08% % C 0.91% Si - P 0.13% % Mn 0.49% S - Fe 0.01% - balance Mn 0.54% Cr - Fe 0.53% - 46% Typical Applications: recommended for repairs of cast iron where the deposits do not require subsequent machining. Engine heads, machine parts, engine blocks. Typical Applications: recommended for all types of cast iron, specially, nodular cast iron. Recovery of valve bodies, bodies and pump lids, drums stranding, exocentric shaft crushers. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / / NI 375 AWS ENi-Cl NI 99 AWS ENi-Cl Description: nickel-iron deposit designed for cast iron. It delivers smooth homogeneous welds, free of porosity (even in parts contaminated with oil) as carbon is expelled from the solution as graphite. Easy slag removal. AC, DCNE. All Position. Description: nickel-iron deposit designed for joining and repair gray cast iron. It delivers smooth homogeneous welds, free of porosity (even in parts contaminated with oil) and is of higher strength and ductility than the base metal. Easy slag removal. AC, DCNE. All Position. C 1.10% Si - P 0.45% % C 0.74% Si - P 0.11% % Mn 1.00% Fe - Ni 2.50% - balance Mn 0.18% Cr - Fe 0.15% % Typical Applications: recommended for cast iron filling and repair where the deposit needs to be machined: engine blocks, cams and differentials. Typical Applications: recommended for all types of cast iron, specially, nodular cast iron. Recovery of valve bodies, bodies and pump lids, drums stranding, exocentric shaft crushers. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / /

16 ALUM 43 AWS E-4043 Product SPECIAL Catalogue Electrodes SEAWELD 14 AWS E-7014 Description: electrode for joining, filling and repair of aluminum with a high deposition rate. Its operation is smooth and it is easy to control the bead due to great arc stability at low amperage. DCPE. Flat, Horizontal & Vertical Position. Tensile Resistance Elongation in 2in 36 ksi 18% Typical Applications: aluminum tanks, pipes, heavy cast, shelves, dies, engine blocks and pistons. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Certifications: ABS, Lloyd Register Description: designed for underwater welding of carbon steel with same characteristics as conventional E7014. Easy arc start, high performance and good penetration. The arc is smooth and stable in submarine applications. Typical Applications: non structural underwater repairs. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameters: 1/8, 5/32 and 3/16. INDURA SPEED CUT INDURA SPEED CHAMFER Description: electrode designed to cut and drill all metals with AC or DCNE. It is a high speed electrode and its special refractory type coating prevents the core to preheat and focuses the arc force to achieve smooth and clean cuts. Typical Applications: high speed cutting in all positions. It is recommended for use on all metals, specially those that present difficulties to be cut or drilled when treated with oxy-fuel equipment, such as: cast iron, stainless steel, nickel alloys, bronze, copper and aluminum. Description: electrode specially formulated for edging and chamfer in all metals. It does not require oxygen nor expensive equipment and it is very easy to apply. Withstands high amperage unaffected because of its refractory coating and allows smooth and clean bezels and channels. AC or DCNE and applicable in any position on difficult or impossible metals to bevel with oxyacetylene equipment. DARK GRAY COATING Typical Applications: for beveling, chamfering, slotting and grooving any metal both ferrous and non ferrous. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 1/ / / / / /

17 INDURA ROCKET GROOVE Product SPECIAL Catalogue Electrodes Strongweld OXYCUT Description: specially designed for chamfering and edging metals. All position AC, DCNE. Very easy to apply and does not require special costly equipment. It is applicable in any metal impossible or difficult to bevel with oxyacetylene equipment. Typical Applications: removal of cracks, to eliminate defects or excess of material, to create clean bezels and channels. Description: exothermic cutting electrode using oxygen reaction. It allows cutting, drilling and torching with high control of the results due to its easy handling. It requires a special torch for its use. It consists of a coated steel tube with concentric symmetrically distributed steel rods on the inside to maximize oxygen flow. It reaches temperatures up to 9,930F (5,500C) being able to melt almost any material. Packaging: 10lb boxes & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp Typical Applications: cutting rebar, carbon steel plates up to 2in thickness, locks, extracting bolts, SAG mill repair, rescue operations. 1/ Packaging: 22lb boxes 5/ Diameter Length Min Amp Max Amp 3/ /8 36in 24in & 18in INDURA SEA CUT Strongweld 2209 AWS E Description: exothermic cutting electrode using oxygen reaction. It can be used with underwater cutting torch for 3/8. The oxygen flow required varies with the depth at which the welder is operating. It reaches temperatures up to 9,930F (5,500C) being able to melt almost any material. It has a cover that provides electric insulation. Typical Applications: underwater cutting of ferrous and non ferrous metals, rocks and concrete, organic materials. Packaging: 22lb boxes Diameter 3/8 Length 36in 24in & 18in Min Amp 150 Max Amp 160 Description: electrode that has a duplex structure consisting in an austenitic-ferric matrix. The deposit has high resistance to traction with improve resistance properties to corrosion under tension and for cavity. Spray transfer with low spatter. Excellent moisture resistance. AC, DCPE. All Position. C Mn Si 10.1% 3.00% Typical Applications: recommended for welding duplex stainless steels containing aprox. 22% Cr, 5% Ni and 3% Mo (type 2205) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Tensile Resistance: 0.03% 1.01% 0.38% 115 ksi Cr Ni Mo Elongation: 27% 22.9%

18 Strongweld 19-9 AWS E Product Stainless Catalogue Steel Electrodes Strongweld 309L AWS E309L-16 Description: electrode with typical composition of 19% Cr and 10% Ni. Highly resistant to sigma phase embrittlement. Easy slag removal and excellent presentation of the cord. AC, DCPE. All Position. Description: electrode for austenitic stainless steel with rutile coating. It has a stable arc spray transfer and a deposit with excellent shape and appearance. The slag is easily removed besides having good arc resumption. AC, DCPE. All Position. C 0.05% Cr 18.7% C 0.05% Cr 18.7% Mn 0.54% Ni 10.2% Mn 0.54% Ni 10.2% Si 0.67% Mo 0.07% Si 0.67% Mo 0.07% Typical Applications: welding of base metals with similar composition stainless steels AISI 301, 302, 304 and 305, containing 16-21% Cr and 8-13% Ni and high carbon content. Temperatures up to 1,382F Typical Applications: welding of 309L and 309Cb stainless steels. Its deposit has excellent corrosion resistance at room temperature but, primarily, designed to resist oxidation at high temperatures 1,832F. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Tensile Resistance: 86 ksi Elongation: 53% Tensile Resistance: 81 ksi Elongation: 30% Strongweld 308L AWS E308L-16 Strongweld 309MoL AWS E309LMo-16 Description: rutile coating electrode for austenitic stainless steel, designed primarily for welding stainless steel with extra low carbon content. Characterized by a stable arc spray transfer which deposit is of excellent shape & appearance. AC or DCPE. All Position. Tensile Resistance Elongation in 2in 81 ksi 41% AWS: 71 ksi AWS: 35% Certifications: ABS, Lloyd Register Description: electrode for austenitic stainless steel with rutile coating, similar to 309Mo but with reduced carbon content, which reduces the possibility of corrosion. AC, DCPE. All Position. C 0.02% Cr 22.3% Typical Applications: especially recommended for corrosion resistant applications where there is a possibility of a cavity produced by sulfuric acid and sulfur, sulfite and cellulose solutions. SS 304, 304L, 308, 308L, 321, 347, 348. Chemical & petrochemical industries, paper mills. Mn Si 0.73% 0.51% Ni Mo 12.5% 2.39% Packaging: 2lb and 5lb vacuum aluminum bags, 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Typical Applications: welding of dissimilar steels, specially between stainless steels and carbon or low alloy steels. Also, for welding stainless steels that contain Cr-Ni-Mo Joints for AISI 309 MoL steels and for Clad Steel repairs type AISI 316 and 316L. 3/32 12in Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) 1/ Tensile Resistance: 99 ksi Elongation: 40% 5/ /

19 Strongweld AWS E Product Stainless Catalogue Steel Electrodes Strongweld 29-9S AWS E Description: rutile electrode for austenitic stainless steel, characterized by stable arc spray transfer deposit which is of excellent shape and appearance. AC or DCPE. All Position. Description: rutile electrode for austenitic stainless steel, characterized by stable arc spray transfer deposit which is of excellent shape and appearance. AC or DCPE. All Position. Tensile Resistance Elongation in 2in 81 ksi 41% AWS: 75 ksi AWS: 35% Certifications: ABS, Lloyd Register Tensile Resistance Elongation in 2in 109 ksi 32% AWS: 96 ksi AWS: 22% Certifications: ABS, Lloyd Register Typical Applications: specially designed for welding stainless steels of type 310 and 314 which require a high tensile strength and corrosion resistance up to temperatures of 1,922F. It can also be used to weld stainless steel of unknown composition and stainless steel of carbon steel. Ideal for acid tanks, stuffing of axes, containers and pipes subject to temperature. Typical Applications: recommended for welding high strength steels type 312 and steels of different composition in which one is high in nickel. Repair of shafts and gears, stuffing of difficult harden-able steel. SS & 303. Welding of difficult steels. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp 3/32 12in 70 1/8 90 5/ / Max Amp sticks/lb Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp 3/32 12in 70 1/8 90 5/ / Max Amp sticks/lb Strongweld 316L AWS E316L-16 Strongweld 347 AWS E Description: rutile electrode for austenitic stainless steel, characterized by stable arc spray transfer deposit which is of excellent shape and appearance. AC or DCPE. All Position. Description: rutile electrode for austenitic stainless steel, characterized by stable arc spray transfer deposit which is of excellent shape and appearance. AC or DCPE. All Position. Tensile Resistance Elongation in 2in 84 ksi 48% AWS: 71 ksi AWS: 30% Certifications: ABS, Lloyd Register Tensile Resistance Elongation in 2in 84 ksi 48% AWS: 71 ksi AWS: 30% Certifications: ABS, Lloyd Register Typical Applications: primarily designed for welding austenitic stainless steels with extra low carbon content. Specially recommended for corrosion resistant applications subject to acid attack. SS 316, 316L, 317, 317L, 316Ti and 318. Tanks containing corrosives. Paper, chemical and petrochemical industries. Typical Applications: primarily designed for welding austenitic stainless steels with extra low carbon content. Specially recommended for corrosion resistant applications subject to acid attack. SS 316, 316L, 317, 317L, 316Ti and 318. Tanks containing corrosives. Paper, chemical and petrochemical industries. Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Packaging: 10lb canisters & 50lb boxes (both with 5lb alum bags inside) Diameter Length Min Amp Max Amp sticks/lb Diameter Length Min Amp Max Amp sticks/lb 3/32 12in /32 12in / / / / / /

20 Product Catalogue Due to our exceptional expertise with the mining, petrochemical, shipbuilding, maritime, wine, agricultural and seismic construction industries, in extreme environments (high altitude, salt corrosion, freezing temperatures, extreme temperature variations, high depths). We have developed many special electrodes for highly specific applications. If you don t see what you need, or you believe you might require something more specific, please don t hesitate contacting us. We most probably will have what you are looking for or we may use our experience to help you find what is right for you. Why? Because we really care... Shipbuilding Metal Fabrication Anti-seismic structures Mining Winemaking Heavy machinery

21 Product ARC Welding Catalogue Machines Indura 165 CV EVOLUTION A simple, affordable, portable SMAW (manual arc) transformer-type AC welding machine. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures. Includes: stick holder set, ground clamp and cable set, hand welding shield and slag hammer. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 110v 1Ph 60Hz DC 20% 430x250x Indura 180 CV EVOLUTION Portable SMAW (manual arc) transformer-type welding machine, similar to 165CV but with more power. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures. Includes: stick holder set, ground clamp and cable set, hand welding shield and slag hammer. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 110v 1Ph 60Hz DC 20% 430x250x

22 Product ARC Welding Catalogue Machines Indura 195 CV EVOLUTION With more muscle, this simple, affordable, portable SMAW (manual arc) transformer-type AC welding machine. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures. Includes: stick holder set, ground clamp and cable set, hand welding shield and slag hammer. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 110v 1Ph 60Hz DC 20% 430x250x Indura 230 CV For semi-industrial users. Portable SMAW (manual arc) transformer-type AC welding machine. Fan ventilation. Voltage regulated by mobile shunt. Over-current protection by thermostat. Easy and fast connectivity. Ideal for welding window frames, fences, locks and light structures. Includes: stick holder set, ground clamp and cable set, hand welding shield and slag hammer. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 220v 1Ph 60Hz DC 20% 545x280x365 26

23 Product ARC Welding Catalogue Machines Indura 250 Italian semi-industrial AC SMAW welding machine. Shunt mobile voltage regulation and lower power loss. Excellent voltage in open circuit which allows welding with a wide variety of electrodes. Guaranteed duty cycle. Easy to operate. Typical uses: welding metal profiles, light metal fabrication, light structures. Includes: stick electrode holder set, ground clamp and cable set. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) v 1Ph 50-60Hz DC 20% 325x470x Indura 250S Italian semi-industrial DC SMAW transformer-type welding machine. Shunt mobile voltage regulation and rectifier to provide DC. Excellent voltage in open circuit which allows welding with a wide variety of electrodes. Guaranteed duty cycle. Easy to operate. Typical uses: welding metal profiles, metal fabrication, light and medium structures. Includes: stick electrode holder set, ground clamp and cable set. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) v 3Ph 50-60Hz DC 360x485x

24 Product ARC Welding Catalogue Machines Indura 400HD Italian heavy-industrial DC SMAW/TIG transformer-type welding machine. Shunt mobile voltage regulation. Forced fun ventilation. Silicon diodes. Typical uses: fabrication and repair of metal profiles and studs, metal fabrication, structural fabrication. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) v 3Ph 50-60Hz DC 390x690x Indura DELTA POWER 630E Italian heavy-industrial DC SMAW/CAG welding machine with control circuit and solid state power. Over-current protection. Digital power and voltage meters. Current fluctuation compensation function. Arc strength adjusting function. Protection class IP21S. Typical uses: shipyards, construction, boiler fabrication Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) v 3Ph 50-60Hz DC 1170x770x

25 ARC Product Welding Catalogue Machines Inverters INVERWELD 1600 ARC/TIG BY KEMPPI Indura s version of the popular lightweight MMA/TIG Minarc ideal for use in workshop and site environments. Tolerates large fluctuations of input voltage making it excellent in field conditions with long cables or supply generators. Designed with portability and outdoor use in mind, it has a durable casing, ease of carry with its shoulder strap and well-protected control knobs. Protection against overload, over voltage, humidity and dust ingress gives excellent reliability. TIG welding is made possible with the scratch-tig function. It is also available with a VRD function - lower open circuit voltage for welding in dangerous environments. COMPACTWELD 100 Input Power AC/DC Output Range Rated Output Dimensions mm Weight (Kg) 220v 1Ph 50-60Hz 120v 1Ph 50-60Hz DC/AC 130x275x Weld Anywhere tool due rugged construction and mobility -works with generator and long supply cable- Superior arc performance with wide range of electrodes including cellulosic electrodes User-friendly - easy to find correct welding values due to automatic Hot Start and Arc Force An affordable, easy-to-use, SMAW DC welding inverter that provides a stable arc due to its excellent control system. Portable with a convenient transportation case. IGBT technology that ensures great stability. Over-current and overheating internal controls. Typical uses: light structure fabrication and repairs. Includes: electrode holder, welding clamp and cable, hand shield, slag hammer and brush, transportation case. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 220v 1Ph 50-60Hz DC 130x230x300 4

26 ARC Product Welding Catalogue Machines Inverters INDURARC 131 IGBT DC SMAW Inverter welding machine with energy-save technology for greater power consumption efficiency. Over-current and over-heating control protection. Current control in close lace. Better arc control for easy welding. Made in Italy. Uses: light structure fabrication and repairs. Includes: electrode holder, clamp and cable and transportation belt. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 220v 1Ph 50-60Hz DC 140x195x385 7 INDURARC 151 IGBT DC SMAW Inverter welding machine with energy-save technology for greater power consumption efficiency. Over-current and over-heating control protection. Current control in close lace. Better arc control for easy welding. Made in Italy. Uses: light structure fabrication and repairs. Includes: electrode holder, clamp and cable and transportation belt. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 220v 1Ph 50-60Hz DC 140x195x

27 ARC Product Welding Catalogue Machines Inverters INDURARC 181 IGBT DC SMAW Inverter welding machine with energy-save technology for greater power consumption efficiency. Over-current and over-heating control protection. Current control in close lace. Better arc control for easy welding. Made in Italy. Uses: light structure fabrication and repairs. Includes: electrode holder, clamp and cable and transportation belt. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 220 v 1Ph 50-60Hz DC 140x195x INDURARC 201 IGBT DC SMAW Inverter welding machine with energy-save technology for greater power consumption efficiency. Over-current and over-heating control protection. Current control in close lace. Better arc control for easy welding. Made in Italy. Uses: light structure fabrication and repairs. Includes: electrode holder, clamp and cable and transportation belt. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 220 v 1Ph 50-60Hz DC 140x195x

28 ARC Product Welding Catalogue Machines Inverters MINARC Powerful lightweight SMAW welding machines ideal for use in workshop and site environments. Tolerates large fluctuations of input voltage making it excellent in field conditions with long cables or supply generators. Protection against overload, over voltage, humidity and dust ingress gives excellent reliability. TIG welding is made possible with the scratch-tig function. VRD function - lower open circuit voltage for welding in dangerous environments. Minarc 151 is designed to be used with 110V site transformers. Input Power AC/DC Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 230 v 1Ph 50-60Hz AC/DC 320x123x265 4 MINARC 220 The Minarc s superior arc performance is based on high voltage reserves and automatic Arc Force. These guarantee that the arc will stay stable in all positions, with any current and even with extra long cables up to 160ft. Automatic Hot Start gives perfect ignition in all conditions. U/I-welding characteristic curve has been reformed, application for this Anti Sticking function is to degree the risk for MMA electrode sticking to base material. The 220 also has a remote control for easy operation. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) v 1Ph 50-60Hz DC 400x180x

29 Product Catalogue WELDING EQUIPMENT & SUPPLIES GMAW - FCAW MIG & FLUX CORED

30 Product Mild Catalogue Steel Solid -Wire 2014 Strongweld Indura 70S6 AWS ER-70S-6 Description: this outstanding premium MIG wire made a name for Strongweld in the United States. A solid wire for welding process with gas protection. A copper plating coating protects the wire and reduces abrasion allowing a smooth and fast feeding, with minimum damage to liner and tip. This carbon steel electrode offers excellent weldability with high amounts of deoxidizing elements. It provides a deposit with virtually no slag. All positions, DCPE. Certifications: ABS, Lloyd Register, Germanischer Lloyd, Bureau Veritas, Canadian Welding Bureau. Exceeds AWS and MIL Specs. Typical Applications: recommended for use in common low alloy steels. Its Si-Mn content gives excellent deoxidizing properties which ensures a weld free of porosity over a wide range of jobs. Pressure vessels, pipe welding, metal manufacturing and fabrication, structures. Made in Chile with pure copper and steel no recycled content. Packaging: 11lb (4 in master display) and 33lb spools vacuum sealed in carton boxes. By special order: 1/16 (1.6mm) diameter is available. Diameter (mm-in) Voltage Min Amp Max Amp CO2 Flow (lt/min) MIGMATIC AWS ER-70S-6 Description: this outstanding premium MIG wire made a name for Strongweld in the United States. A solid wire for welding process with gas protection. There are hundreds of manufacturers for MIG wire worldwide and a bunch of them make a good product that meets or exceeds AWS standards. But there are less than a handful manufacturers of premium high-performance drums. Strongweld is one of these few. Our drums are a perfect balance of reliability, affordability and performance. We have two plants in two continents devoted to manufacture second-to-none drums. Typical Applications: recommended for use in common low alloy steels. Its Si-Mn content gives excellent deoxidizing properties which ensures a weld free of porosity over a wide range of jobs. Pressure vessels, pipe welding, metal manufacturing and fabrication, structures. Packaging: 550lb and NEW! 275lb drums NEW!. Mostly by special order. Diameter (mm-in) Voltage Min Amp Max Amp CO2 Flow (lt/min) 1.6-1/ Tensile Resistance 77 ksi AWS: 70 ksi Elongation 31% (AWS: 22%) Fluency Limit 60 ksi AWS: 58 ksi 400 AWS A 5.18/A5.18M-05 ALSO AVAILABLE AS AWS ER-70S-3

31 STRONGWELD 308L AWS ER-308L Product Stainless Catalogue Steel Solid Wire STRONGWELD 316L AWS ER-316L Description: SS solid wire offering a well balanced chemical analysis, resulting in uniform properties of the weld metal. All position DCPE. Description: SS solid wire offering a well balanced chemical analysis and stable spray arc transfer. Its low carbon formula prevents intergranular corrosion by carbides. All position DCPE. C Mn Si 0.02% 1.90% 0.38% 9.8% 0.19% Typical Applications: for SS AISI 304L,308, 308L, 321 & 347 types that can be used in a wide range of corrosive conditions without need of heat treatment. Equipment for food processing and storage, pumps, heat exchangers, tanks w/corrosive chemicals. Cr Ni Mo 19.8% C Mn Si 0.02% 1.69% 0.38% 11.1% 2.10% Typical Applications: for austenitic stainless steels type 316, 316L and 318. Especially recommended for corrosion resistant applications subject to bite (acid attack) No heat treatment neccesary. Cr Ni Mo 18.1% Packaging: 25lb spools Packaging: 25lb spools Tensile Resistance: 83 ksi Elongation: 44% Tensile Resistance: 83 ksi Elongation: 44% STRONGWELD 309L AWS ER-309L Description: SS solid wire without coating for MIG and TIG. Low carbon reduces the possibility of carbide precipitation and thus increasing resistance to corrosion. All position DCPE. C 0.02% Cr 19.8% Mn 1.90% Ni 9.8% Si 0.38% Mo 0.19% Typical Applications: for SS AISI 309L, 304L, 309, 321 and 347. Food and corrosive chemicals storage & processing equipment. Packaging: 25lb spools Tensile Resistance: 83 ksi Elongation: 42%

32 STRONGWELD 4043 AWS ER-4043 Aluminum Product Catalogue & Bronze -Solid 2014Wire STRONGWELD 5356 AWS ER-5356 Description: solid aluminum wire for MIG and TIG. This wire is characterized by its high quality deposits and an excellent gloss on the surface of the cords. All position DCPE. Description: solid welding wire with 5% Mg for MIG and TIG. Very high quality deposits with a gloss surface finish. All position DCPE. Cu Mn - Mg Si 0.30% 0.05%-0.05% % 0.1%-0.2% balance Typical Applications: tensile strength, ductility and corrosion resistance surpass those of the metal base. Specially recommended for welding irons and thick castings. Used in oxyacetylene form needs Solarflux 202 or All State 31. Aluminums 2014, 3003, 6061 and Fe Zn - Ti Al 0.8% Mg Mn Si % % 0.25% 0.4% % Typical Applications: its high tensile strength makes it suitable for manufacturing and repairing of rolling type fuel tanks. Aluminums 5083, 5096, 5486, 5454 and General use in tank industries. Very similar to Cr Fe Ti % Packaging: 25lb spools Packaging: 25lb spools Strongweld ER CuAl2 AWS ER-CuAl-A2 Description: solid brass-aluminum type alloy of high mechanical strength for copper and ferrous metal alloys. Deposit is corrosion and wear-by-friction resistant. Flat and horizontal filet position DCPE. Al % Fe 1.5% Pb 0.02% Zn 0.02% Si 0.10% Typical Applications: joints of similar composition: manganese, silicon-bronze, certain copper-nickel alloys and ferrous metals. Also for dissimilar joints: aluminum-bronze and copper-stainless steel. Applications were resistance to erosion and corrosion by acid and salt water is required: boat propellers, pumps and fittings. Packaging: 25lb spools

33 STRONGWELD 71V AWS E-71T-1C/1M Dual Product Shield Catalogue Mild Steel - Tubular 2014 Wire STRONGWELD 71T-1 AWS E-71T-1C Description: external gas-shielded tubular wire that works with both CO2 and CO-Ar mix. Designed for welding high strength steels. All position DCPE. Similar to ESAB 7100 Ultra. Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB Description: external gas-shielded tubular wire that works with 100% CO2. Designed for welding high strength steels. Excellent mechanical properties, easy slag removal, low spatter generation, smooth bead shape, high X-ray safety. All position DCPE. C 0.03% Cr 0.03% C 0.04% P 0.015% Mn 1.44% P 0.013% Mn 1.25% S 0.01% Si 0.59% S 0.01% Si 0.55% Mo 0.19% Typical Applications: extremely versatile for a wide variety of structural and non-structural applications: heavy machinery, earth moving equipment, bridges, shipbuilding, off-shore & structures in general. Typical Applications: extremely versatile for a wide variety of structural and non-structural applications: heavy machinery, earth moving equipment, bridges, shipbuilding, structures in general. Packaging: 33-44lb spools, 60lb coils and 550lb drums. Diameters: 045 &1/16 Packaging: 33lb spools and 60lb coils. Diameters: 045 &1/16 Tensile Resist.: 88 ksi Elongation: 27% Tensile Resist.: 83 ksi Elongation: 27% STRONGWELD 81 AWS E-81T-1Ni-1/2 STRONGWELD AWS ER-70C-6M Description: external gas-shielded tubular wire that works with both CO2 and CO-Ar mix. Designed for welding high strength steels. Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB Description: ultra high performance self-shielded tubular wire. KIt feature good penetration, high resistance to porosity, good wetting behavior as well as low hydrogen content. Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB. DCPE, Vertical & Flat Positions. C 0.03% Ni 2.03% Mn Si 1.17% 0.35% 0.012% 0.01% Typical Applications: extremely versatile for a wide variety of structural and non-structural applications: heavy machinery, earth moving equipment, bridges, shipbuilding, off-shore & structures in general. Packaging: 33-44lb spools, 60lb coils and 550lb drums. Diameters: 045 &1/16 P S C Mn Si 0.03% 1.17% 0.35% 0.012% 0.01% Typical Applications: intended for semi-automatic, automatic, single & pass welding: heavy machinery, bridges, shipbuilding & general fabrication. Packaging: 33-44lb spools, 60lb coils and 550lb drums. Diameters: 045, 055 &1/16 Ni P S 2.03% Tensile Resist.: 99 ksi Elongation: 24% Tensile Resist.: 78 ksi Elongation: 29%

34 STRONGWELD 71T-8 NR232 Innershield Product Catalogue Mild Steel -Tubular 2014 Wire STRONGWELD 70T-4 AWS E-70T-4 Description: self-shielded tubular wire designed for structural welding of high strength steels. All position DCNE. Similar to Lincoln NR232. Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB Description: self-shielded multi-pass tubular wire designed for windy outdoor applications in high strength steels. It has good arc stability, low spatter generation, high efficiency, good bead shape and slag removal. Flat and angular positions. DCPE. C 0.04% Cr 0.03% Mn 1.40% P 0.015% C 0.04% Cr 0.03% Si 0.65% S 0.01% Mn 1.40% P 0.015% Typical Applications: specially designed for seismic zones applications due to its high impact resistance, at low temperatures, ductility and low hydrogen deposit: heavy machinery, buildings, bridges, shipbuilding, scaffolding & structures in general. Si 0.65% 0.01% Typical Applications: general fabrication & structural work requiring no impact properties. S Packaging: 11, 25 & 33lb spools, 60lb coils & 550lb drums. Diameters: 045, 072, 1/16, 5/64 & 3/32 Packaging: 11, 25 & 33lb spools, 60lb coils & 550lb drums. Diameters: 045, 072, 1/16, 5/64 & 3/32 Tensile Resist.: 76 ksi Elongation: 27% Tensile Resist.: 76 ksi Elongation: 27% STRONGWELD 21 AWS E-71T-11 Description: self-shielded tubular wire designed for structural welding of 490Mpa steels. All position DCNE. Similar to Lincoln NR211. Meets AWS D1.8 and FEMA 353 seismic supplement. ABS-CWB C Mn 0.04% 1.40% Cr P 0.03% 0.015% All our wires and electrodes are certified to meet or exceed AWS and MIL specs. Our structural wires and electrodes meet all required standards, including: AWS Seismic D1.8 and FEMA Si 0.65% S 0.01% Typical Applications: Typical applications include general fabrication and structural work requiring no impact properties (ASTM A36 Gr. All; A109 Gr. All; A283 Gr. A,B,C,D; A284 C,D; A285 Gr. A,B,C; A288 Gr. 1; A372 type; A500 Gr. All; A501 Gr. all) Packaging: 11, 25 & 33lb spools, 60lb coils & 550lb drums. Diameters: 045, 072, 1/16, 5/64 & 3/32 Tensile Resist.: 76 ksi Elongation: 27%

35 TUBE ALLOY Selfshield Product Catalogue Hardfacing -Tubular 2014 Wire TUBE ALLOY 255-G Description: self-shielded tubular wire designed to provide deposits of extra high Cr-C steel alloy with elevated resistance to extremely severe abrasion at high temperatures up to 1,238F (670C) Can be used also in SAW. Description: dual-shielded tubular wire designed to provide Hardfacing with elevated resistance to severe abrasion. Deposit is carbonchromium alloy. This wire has excellent performance with Martensitic deposits at a rate of 9:1. Tension release cracks will appear but they won t affect abrasive resistance. Typical Applications: for filing low alloy, carbon based metals, austenitic manganese steels: drills, earthmoving machinery, bulldozer loader bucket, rollers, crushers, feeding screws. Typical Applications: rock drills, earthmoving machinery, bulldozer loader bucket, rollers, crushers, hummers, screws; sand, cement or mineral chutes, harvesting equipment, shrank rippers, trailing dredgers, selection sieves. Packaging: 33lb spools and 60lb coils Diameters: 045, 7/64 Packaging: 33lb spools and 60lb coils Diameters: 045 TUBE ALLOY TUBE ALLOY BUILD UP - OVERLAY Description: self-shielded tubular wire designed to provide deposits of Martensitic steel comparable to those in H12 tools. It has an outstanding metal-to-metal abrasive resistance, as well as good impact resistance up to 1,004F (540C) Use as buildup. Description: self-shielded tubular wire designed to provide deposits of low-alloy steel. Designed for build up on carbon steels and low alloy steels. Welded metal has good impact and compression resistance making it an excellent base for abrasive resistant overlays. Deposit is machinable and has high resistance against cracking. Not suitable for joints. Typical Applications: coupling housing, torque transmission, dragline chains, mill fingers. Packaging: 33lb spools and 60lb coils Diameters: 045 & 1/16 Typical Applications: crane wheels, gear cogs, mining cart wheels, steel axles, rotating chains. Packaging: 33lb spools and 60lb coils Diameters: 1/16 & 7/64

36 STRONGWELD AWS E-308LT1-1 Dual Product Shield Catalogue Mild Steel - Tubular 2014 Wire STRONGWELD AWS E-316-LT1-1 Description: dual-shield tubular wire designed to provide deposits with optimum ferrite content in its austenitic structure and therefore, having excellent weldability, low possibility for cracking and improved creep resistance at high temperatures. Gas protection: 100% CO2 or Mix Description: dual-shield tubular wire designed to provide deposits with optimum ferrite content in its austenitic structure. Easy to operate with powerful penetration and spray transfer, offering minimum spatter and self-removable slag. Excellent weldability and minimum crack. Gas protection: 100% CO2 or Mix Typical Applications: MAG welding of stainless steel type 18%Cr-8%Ni -low carbon content. Stainless steel AISI 304, 304L, 304LN, ASTM A157 gr. C9, A320 gr. B8C or D. Typical Applications: MAG welding of stainless steel type 22%Cr-12%Ni-2%Mo -low carbon content. Its low carbon content provides good resistance against metal corrosion. Packaging: 33lb spools Diameters: 045 Packaging: 33lb spools Diameters: 045 STRONGWELD AWS E-309LT1-1 Description: dual-shield tubular wire designed to provide deposits with high ferrite in its austenitic structure. Easy to operate with powerful penetration and spray transfer, offering minimum spatter and almost no slag. Gas protection: 100% CO2 or Mix Typical Applications: MAG welding of stainless steel type 22%Cr-12%Ni -low carbon content. Dissimilar joints between high resistance steels. Stainless steels 309 and 309Cb. Also available, by special order: Self Shielded Stainless Steel Wire Strongweld 308LO AWS E-308LTO-3 Strongweld 309LO AWS E-309LTO-3 Packaging: 33lb spools Diameters: 045

37 Product SPECIALTY Catalogue Tubular Wire AVAILABLE BY SPECIAL ORDER OF 4,000LB OR MORE: High Tensile Steel: STRONGWELD E61T-G STRONGWELD E70T-1C/1M STRONGWELD E70T-5M STRONGWELD E71T-5C/5M STRONGWELD E70T-1C STRONGWELD E70C-3C STRONGWELD 55T STRONGWELD E81T1-Ni1C STRONGWELD 81T1-Ni1M STRONGWELD 80T1-Ni1C STRONGWELD 82TM STRONGWELD E80G-C STRONGWELD E91T1-G H4 STRONGWELD 100K3M STRONGWELD 110K3M STRONGWELD 115TK4M STROGWELD E121T1-G Self Shielded Multi-Pass: STRONGWELD E70T-10 Corrosion Resistant Steel STRONGWELD 71TS STRONGWELD E81T1-W2C S45C Pipe Welding: STRONGWELD 45CT-Pipe Heat Resistant Steel STRONGWELD E81T1-A1C STRONGWELD E81T1-B2C STRONGWELD E81T1-B2LC STRONGWELD E91T1-B3C STRONGWELD E91T1-B3LC STRONGWELD E81TB6 STRONGWELD E91T1-B9M

38 Product SPECIALTY Catalogue Tubular Wire AVAILABLE BY SPECIAL ORDER OF 4,000LB OR MORE: Low Temperature Service Steel: STRONGWELD E71T-1C/-9CJ H4 STRONGWELD E71T-12CJ H4 STRONGWELD E71T-12MJ H4 STRONGWELD 71TP STRONGWELD E80T1-K2C H4 STRONGWELD E81T1-K2C H4 STRONGWELD E91T1-K2C H4 Electro Gas Welding: STRONGWELD EG70T-2 STRONGWELD EG70T-G Hardfacing: STRONGWELD Hv250HT STRONGWELD Hv300HT STRONGWELD Hv350HT STRONGWELD Hv450HT Hardfacing Cont.: STRONGWELD Hv500HT STRONGWELD Hv600HT STRONGWELD Hv700HT STRONGWELD Hv800HT STRONGWELD CXA-40HT STRONGWELD CXA-41HT Stainless Steel: STRONGWELD 317LT1-1 STRONGWELD 347T1-1 STRONGWELD 329T/TE STRONGWELD 325T STRONGWELD 409TiC STRONGWELD EC430 STRONGWELD 436T STRONGWELD EC439 STRONGWELD 410NiMo

39 Product MIG Welding Catalogue Machines INDURA MIG AMIGO 181 GMAW -solid MIG- welding machine with step-by-step current regulation for light duty applications. Fan ventilated. Welding LINER INCLUDED. Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 220 v 1Ph 50-60Hz DC 300x380x INDURA MIG AMIGO 201 PRO GMAW -solid MIG- welding machine with step-by-step current regulation for medium duty semi-industrial use. Fan ventilated. Welding liner included. Digital panel and burnback time (BBT) control to reduce wire burn back potential. Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 220 v 1Ph 50-60Hz DC 333x485x

40 Product MIG Welding Catalogue Machines INDURA MIG AMIGO 251 PRO GMAW -solid MIG- welding machine with step-by-step current regulation for medium duty semi-industrial use. Fan ventilated. Welding liner included. Digital panel and burnback time (BBT) control to reduce wire burn back potential. Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 220 v 1Ph 50-60Hz DC 365x560x INDURA MIG AMIGO 263 PRO GMAW -solid MIG- DC constant voltage welding machine with IP 22 step-by-step current protection for heavy-duty industrial use. Fan ventilated, spot welder with timer. Welding liner included. Digital panel and burnback time (BBT) control to reduce wire burn back potential. Energy saving features for low power usage. Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 380v 3Ph 50-60Hz 440v 3Ph 50-60Hz DC 365x560x v 3Ph 50-60Hz 440v 3Ph 50-60Hz DC 365x560x

41 Product MIG Welding Catalogue Machines INDURA MIG AMIGO 413/C Italian GMAW and FCAW welding machine with 4 roller feeder set. Solid state circuit design with forced air ventilation. Over-current protection class IP-22. Equipped with 24 different regulation positions. Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 380v 3Ph 50-60Hz 440v 3Ph 50-60Hz x810x INDURA MIG AMIGO 453 Italian GMAW and FCAW welding machine with 4 roller feeder set. Solid state circuit design with forced air ventilation. Over-current protection class IP-22. Equipped with 24 different regulation positions. Detachable 4-wheeled header for independent mobility. Includes: MIG gun and liner, clamp and cable, gas flow regulator and mobility cart. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 380v 3Ph 50Hz 440v 3Ph 60Hz x1340x

42 Product MIG Welding Catalogue Machines MINARC ADAPTIVE 150 MIG/MAG Revolutionary in ease of use, MinarcMig is ideal for both professional or hobby use. MinarcMig, small and lightweight machines, make it easy to weld anywhere and are made to move with you. MinarcMig machines have Adaptive Control, which accurately takes care of the welding parameters. Simply select the plate thickness from one knob control, pull the gun trigger and weld. MIG welding has never been so easy! MinarcMig 150 Adaptive is a high duty Steel specialist. A 150A machine with 35% duty cycle and excellent power and weight ratio makes a class leading machine that s certainly out of the ordinary. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 230v 3Ph 50-60Hz x180x MINARC ADAPTIVE 181 MIG/MAG Revolutionary in ease of use, MinarcMig is ideal for both professional or hobby use. MinarcMig, small and lightweight machines, make it easy to weld anywhere and are made to move with you. MinarcMig machines have Adaptive Control, which accurately takes care of the welding parameters. Simply select the plate thickness from one knob control, pull the gun trigger and weld. MIG welding has never been so easy! MinarcMig 180 Adaptive creates a new dimension in compact MIG machines for Al, SS and Fe filler wires. The large and clear LCD user interface indicates the amperes, voltage and wire feed speed selected including material and gas combination when automatic mode is on Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 230v 3Ph 50-60Hz x180x

43 KEMPOMAT 2500/3200/4200 MIG/SMAW Product MIG Welding Catalogue Machines PROEVOLUTION MIG/TIG FASTMIG PULSE 350/450 MIG/SMAW Also available, by special order: Kemppi The joy of welding We are one of the largest dealers of Kemppi equipment worldwide and now, we bring to the U.S. these advanced equipments.

44 Product Catalogue WELDING EQUIPMENT & SUPPLIES GTAW TIG Welding

45 STRONGWELD 70S 3 AWS ER-70S-3 Description: TIG rod with excellent deoxidizing properties due to its Si and Mn content, ensuring a porosity-free weld for a wide scope of works. Typical Applications: low alloy common steels in single and multiple passes. Steels with moderately dirty or rusty surfaces. Steels: ASTM A36, A285-C, A and A Product Catalogue TIG Rods STRONGWELD 70S 6 AWS ER-70S-6 Description: mild steel TIG rod with high percentage of deoxidizing elements with similar characteristics to MIG Wire ER70S-6. Typical Applications: joining and repairing carbon steel low-alloy pieces. Joining boiler pipes and tubes. Welding root pass for optimal radiographic quality. Packaging: 10lb boxes Packaging: 10lb boxes Diameter (mm-in) 2.4-3/ /8 Length (in-mm) SAP Code Diameter (mm-in) 1.6 1/ / / /8 Length (in-mm) SAP Code STRONGWELD 25 AWS ER-1100 STRONGWELD 26 AWS ER-4043 Description: pure aluminum TIG rod (99% Min) for GTAW (TIG) and oxyacetylene use. Typical Applications: joining and repairing aluminum with grade 1060, 1350, 3003, Appropriate for pieces to be anodized due to its excellent electric conductivity. Food and dairy industries, refrigeration equipments. Description: aluminum TIG with 5-6% Si for GTAW (TIG) and oxyacetylene use. The deposit are smooth with outstanding appearance and bright. Typical Applications: joining and repairing aluminum alloys up to 7% Si and alloys with less than 2% of other alloy elements: type 2014, 3003, Packaging: 10lb boxes Packaging: 10lb boxes Diameter (mm-in) Length (in-mm) SAP Code Diameter (mm-in) Length (in-mm) SAP Code 1.6 1/ / / / / / / / / / /

46 STRONGWELD 5356 AWS ER-5356 Description: aluminum TIG rod for GTAW (TIG) and oxyacetylene use. Its 5% Mg content gives great resistance to traction and corrosion specially in sea water- with great ductility. Appropriate for pieces that will be anodized. Typical Applications: joining and repairing pieces of Al-Mg alloy as: 5083, 5096, 5486, Fabrication and repairing of moving fuel tanks. Product Catalogue TIG Rods STRONGWELD 308L AWS ER-308L Description: austenitic SS TIG with ultra low-carbon content to avoid precipitation of Cr-C. Deposit with high resistance in a wide variety of corrosive environments. Typical Applications: joining and repairing stainless steel pieces type: 301, 302, 304, 304L, 321 Packaging: 10lb boxes Diameter (mm-in) Length SAP Code Packaging: 10lb boxes 1.6 1/16 36in Diameter (mm-in) Length SAP Code 2.4-3/32 36in /16 36in /8 36in /32 36in /32 36in STRONGWELD 309L AWS ER-309L STRONGWELD 316 AWS ER-316L Description: austenitic SS TIG rod with ultra low-carbon content to inhibit precipitation of Cr-C. Deposit is resistant to heat and inter-crystal corrosion. Typical Applications: joining and repairing pieces of stainless steels types 309, 309 Cb, 12% Ni steels, and carbon and low-alloy steels with stainless steel. Description: austenitic SS TIG rod with ultra low-carbon content to inhibit precipitation of Cr-C. Deposit is resistant to heat and inter-crystal corrosion. Typical Applications: joining and repairing pieces of austenitic stainless steels containing 16-21% Cr, 10-15% Ni, 0-3% Mo both stabilized and not stabilized: 316, 316L, 318. Root pass in tanks and pipes for chemical, dairy and food industries. Packaging: 10lb boxes Packaging: 10lb boxes Diameter (mm-in) Length (in-mm) SAP Code Diameter (mm-in) Length (in-mm) SAP Code 2.0 5/64 36in /64 36in /32 36in /32 36in /8 36in

47 STRONGWELD AWS ER-80S-B2 Product Catalogue TIG Rods STRONGWELD AWS ER-90S-B3 Description: steel TIG rod with Cr & Mo. Very resistant to heat and corrosion. Typical Applications: joining and repairing steels 1 ¼ Cr ½ Mo as ASTM 335 Gr P2, P11, P12. Boiler and oven pipes subject to high temperatures. Packaging: 10lb boxes Description: steel TIG rod with chromium and molybdenum at higher concentrations than 80S-B2 which improves even further its resistance to corrosion and high temperatures. Typical Applications: joining and repairing steel 2 ¼ Cr 1 Mo as ASTM 335 Gr P22 and similar. Oil industry pipes where service is required at high temperatures. Diameter (mm-in) Length (in-mm) SAP Code Packaging: 10lb boxes 1.6 1/16 36in Diameter (mm-in) Length SAP Code 2.4-3/32 36in /16 36in /8 36in /32 36in STRONGWELD AWS ER-Ti-2 By Special Order Oxy Gas Rods: Description: this TIG rod is commonly referred as Pure Titanium. Widely used for its great balance between resistance, machinability and weldability. Typical Applications: seawater environments, chemical process heat exchangers, pressure vessels, cellulose pulp bleaching, electrochemical and chemical storages. Packaging: 10lb boxes Diameter (mm-in) 1.6 1/16 Length 36in SAP Code Silver Rods: - AG 6% Rod AWS B Cu P-4 - AG 15% Rod AWS B Cu P-5 - AG 35% FC Rod AWS B Ag-2 - AG 45% FC Rod AWS B Ag-5 - AG 50% FCFX AWS B Ag-9 Tungsten Carbide: - Tungsten Drill - Borium Tin Rods: - Tin (Sn) Rod - Galvanizing Rod Bronze Rods: - Strongweld 17 AWS R FX AWS RB CuZn-C FX AWS RB CuZn-D 2.4-3/32 36in

48 TIG Product Welding Catalogue Machines Inverters ARCTIG 160HF Italian inverter-type TIG welding machine with an advanced welding process control that allows a very stable arc. High frequency arc start. Designed with IGBT technology for optimum welding current stability and electronic control systems to protect the device against overheating and over-current. Capable of welding SMAW and GTAW. Typical uses: fabrication and repair of light structures, general repairs, tanks, pipes and fittings. Includes: WP-17 TIG gun, electrode holder, clamp and cables, gas hose, consumables, hand shield and slag hammer and brush. Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) 120v 1Ph 50-60Hz 230v 1Ph 50-60Hz x205x INVERTIG 130/150/200 CEL Italian inverter-type ARC/TIG welding machines with an advanced welding process control that allows a very stable arc. Automatic hot start. Designed with IGBT technology for optimum welding current stability and electronic control systems to protect the device against overheating and over/low-current. Capable of welding SMAW and GTAW. They work with both AC/DC power input (130 CEL: 6Kva, 150 CEL: 7.5Kva and 200 CEL: 11Kva) Transporting case included. Typical uses: fabrication and repair of light structures, general repairs, tanks, pipes and fittings. Model 130 CEL 150 CEL 200 CEL Input Power v 1Ph 50-60Hz v 1Ph 50-60Hz v 1Ph 50-60Hz Output Range Rated Output Dimensions (H x W x D) mm 130x235x x235x x280x445 Weight (Kg)

49 TIG Product Welding Catalogue Machines Inverters MINARC TIG 180/180MLP/250/250MLP Another family of outstanding inverter-type GTAW & SMAW welding machines by Finland s Kemppi. Small and light for excellent portability although powerful as much larger and heavier traditional heavy-duty machines. They work both with AC and DC power sources. Able to weld any type of electrode. Led digital control panel and reliable arc and current electronic control systems. TIG gun is included. Uses: field work, pipe welding, general repair and maintenance, chemical and light fabrication industry. Model Input Power Output Range Rated Output Dimensions (H x W x D) mm Weight (Kg) TIG 180 / TIG 180 MLP 220/230v 1Ph 50-60Hz / 400x180x / 7.8 TIG 250 / TIG 250 MLP 380v/440v 3Ph Hz / 400x180x MASTER TIG MLS 2300/3000/3500 AC/DC If the light and portable Minarc are impressive, wait and see the heavy duty TIG MLS family in action. Although still lighter and smaller than their counterparts in the market, these robust machines deliver great power and superior technology, with the most advanced systems in the industry like MIX TIG, PFC Power control and AC/DC capabilities. User-friendly advanced digital panels allows for easy control of the process. Don t wait too long to try a Kemppi...the joy of welding! Model MLS 2300 AC/DC MLS 3000 MLS 3500 AC/DC Input Power 380v 3Ph 50-60Hz 380v 3Ph Hz 380v 3Ph Hz Output Range Rated Output Dimensions (H x W x D) mm 400x180x x180x x260x870 Weight (Kg)

50 Indura 10 Product Catalogue FLUX ALUMFLUX General use flux for oxyacetylene welding. It keeps its properties along a wide temperature range, to provide effective protection against oxidation. Recommended for tin, copper, cast iron. Packaging: 1lb and 11lb Aluminum and aluminum alloy including cast aluminum- flux. Specially designed to weld all aluminum applications without needing different products. It also works for aluminum brazing. Packaging: 14oz. INDURFLUX INDURINOX-D3 Backup flux for stainless steel and alloy steels. It protects the build-up from oxidation and prevents oxide and cavity forming while helping controlling penetration. A great base for the weld deposit. Packaging: 1lb Stripper gel free of chloride for stainless steels. It is used to rebuild SS s original surface corrosion resistance. The stripping produces better results than sanding, grinding or other surface mechanical treatments. Packaging: 2lb

51 Product Catalogue WELDING EQUIPMENT & SUPPLIES SAW SUBMERGED ARC

52 Strongweld EL12 AWS EL-12 Product Catalogue SAW Wire Strongweld EM12K AWS EM-12K Description: low carbon, low manganese and low silicon solid wire that provides excellent ductility and cracking resistance. The thin copper layer in its surface improves the electric contact between the wire and the tip, thus improving arc stability and reducing friction. AWS, CWB, ABS, DNV, BV, LR certified. Description: solid wire with half manganese and silicone- that allows multi pass on steels up to 7/64 thickness. The thin copper layer in its surface improves the electric contact between the wire and the tip, thus improving arc stability and reducing friction. AWS, CWB, ABS, DNV, BV, LR certified. Typical Applications: machinable welds requiring maximum flexibility. Stud fabrication, bridges, railroad cars, tanks, pressure vessels, propane cylinders, general build up. Packaging: 60lb coils Diameters: 5/64, 3/32, 1/8, 5/32 Typical Applications: butt or fillet joints on mid carbon and lowalloy steels. Stud fabrication, bridges, railroad cars, tanks, pressure vessels. Packaging: 60lb coils Diameters: 5/64, 3/32, 1/8, 5/32 Strongweld EM13K AWS EM-13K Description: silicon solid wire -with balanced silicone and manganese- that provides excellent ductility and cracking resistance. The thin copper layer in its surface improves the electric contact between the wire and the tip, thus improving arc stability and reducing friction. AWS, CWB, ABS, DNV, BV, LR certified. Typical Applications: fabrication and repairs on structural grade steels, heavy machinery and equipments. Strongweld 400/401/105/207 - FLUXES Strongweld 400 F7A0 / EM12K Strongweld 401 F7A0 / EM12K Strongweld 105 F7A2 / EM 12K Strongweld 207 F207 / EL 12 Packaging: 60lb coils Diameters: 5/64, 3/32, 1/8, 5/32

53 Product Catalogue WELDING SUPPLIES MISCELANEOUS

54 PORTABLE CONDITIONER Product MISCELANEOUS Catalogue OXYCUT Automatic Equipments IK-12 BEETLE S-100 IK-12 MAX3 S-100 IK-12 MAX3 S-200 By Koike Aronson AIR FILTRATION FLOW REGULATORS

55 Product Catalogue PPE SAFETY SHOES & BOOTS by AMERICAN SHOE an INDURA company

56 1000 TOP BOOT Product Safety Catalogue Shoes and Boots 1002 CLASSIC BOOT - Hydrofuge waterproof leather - Soft suede linen - Metallic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/2 - Greased water resistant leather - Soft suede linen - Reinforced toe leather cover - Natural leather insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 1/2 to 11 1/ NORWEGIAN 3036 ENGINEER - Wild Moroccan leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 to 11 - Brown Crazy Horse leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 to 11

57 1011 FOUNDRY BOOT Product Safety Catalogue Shoes and Boots 1012 WELDER BOOT - Greased water resistant leather - Soft suede linen - Quick-remove emergency device - Natural leather insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 1/2 to 11 1/2 - Greased water resistant leather - Soft suede linen - Leather metatarsal protection - Natural leather insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 1/2 to 11 1/ MINER 1020 SHORT BOOT - Greased water resistant leather - Soft suede linen - Reinforced toe leather cover - Natural leather insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 1/2 to 11 1/2 - Hydrofuge waterproof leather - Soft suede linen - Metallic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/2

58 2002 ETERNAL BOOT Product Safety Catalogue Shoes and Boots 2008 NEPTUNE BOOT - Greased water resistant leather - Soft suede linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/2 - Greased water resistant leather - Soft suede linen - Extra-resistant toe cover - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/ CLASSIC WOMAN 2112 MANAGER - Brown Moroccan leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 5 to 9 - Brown Moroccan leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 to 11

59 2644 AMERICAN WOMAN BOOT - Brown Crazy Horse leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 5 to 9 Product Safety Catalogue Shoes and Boots 3031 EXECUTIVE - Wild Moroccan leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 to VIP EXECUTIVE 1005 ECONO - Brown Crazy Horse leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 to 11 - Greased water resistant leather - Raw-skin linen - Plastic eyelets - Skin insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 6 to 11

60 5594 ACONCAGUA THERMIC - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced composite TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2 Product Safety Catalogue Shoes and Boots 2072 CROSS - Greased water resistant leather - Soft suede linen - Metallic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PVC sole - Numbers: 7 to 11 1/ AMERICAN CLASSIC 2011 AMERICAN WOMAN - Hydrofuge waterproof leather - Soft suede linen - Metallic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/2 - Brown Crazy Horse leather - Flannel skin linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant rubber sole - Numbers: 5 to 9

61 5720 KOMODO BOOT Product Safety Catalogue Shoes and Boots 5710 KOMODO SHOE - Black leather - Soft suede linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 5 1/2 to 11 1/2 - Black leather - Soft suede linen - Plastic eyelets - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 5 1/2 to 11 1/ TRENDY ENGINEER 5581 DUKE - Brown Crazy Horse leather - Soft suede linen - Plastic eyelets - Natural leather insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/2 - Duke leather - Soft suede linen - Eyelet free - Thermoformed exchangeable insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/2

62 5788 DUKE II Product Safety Catalogue Shoes and Boots 5589 ACID RESISTANT - Brown Duke leather - Soft raw-skin linen - Metallic eyelets - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2 - Soft raw-skin linen - Acid & chemical resistant leather - Cushioned calf and socket line - PU/Rubber hydrocarbon resistant sole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Rubber coated leather exterior - Eyelet free - Numbers: 6 1/2 to 11 1/ RANGER 5720 SEMPER FI - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Fire resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2 - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Fire resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2

63 6920 POLICE BOOT Product Safety Catalogue Shoes and Boots 1200 PARK RANGER - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2 - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Fire resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/ AUSTRAL BOOT 9920 PATAGONIA BOOT - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Non-metallic composite toe - Electric Hazard, Slip Resistance - Hydrocarbon resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2 - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Natural sheepskin lining - Exchangeable thermoformed insole - non-metallic composite toe - Electric Hazard, Slip Resistance - Hydrocarbon resistant PU sole - Extreme weather proof - Numbers: 7 1/2 to 11

64 5594 ACONCAGUA BOOT - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant PU sole - Reinforced toe skin prevents wear - Numbers: 6 1/2 to 11 1/2 Product Safety Catalogue Shoes and Boots 5590 ACONCAGUA SHORT - PU/Rubber injection - Hydrofuge waterproof leather - 3M Thinsulate - Exchangeable thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant PU sole - Numbers: 6 1/2 to 11 1/ RELOAD BOOT DAKAR KIFFA - Goodyear welt. - Hydrofuge waterproof leather - 3M Thinsulate - EVA heel insert - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant rubber sole - Numbers: 6 to 11 1/2 - Nobuck leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2

65 DAKAR NADOR Product Safety Catalogue Shoes and Boots DAKAR KAYES - Nobuck waterproof leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2 - Nobuck waterproof leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Cushioned calf and socket line - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2 DAKAR TWAREK DAKAR SENEGAL - Nobuck leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant sole - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2 - Nobuck waterproof leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant sole - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2

66 DAKAR MOROCCO Product Safety Catalogue Shoes and Boots DAKAR MALI - Nobuck waterproof leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant sole - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2 - Nobuck waterproof leather - Safety shoe - 3M Thinsulate interior - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant sole - EVA midsole for better comfort - Numbers: 6 1/2 to 11 1/2 DAKAR LISBOA SHOE/BOOT DAKAR PARIS SHOE - Nobuck waterproof leather - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant sole - EVA midsole for better comfort - Numbers: 6 to 11 1/2 - Suede and leather exterior - Safety shoe - Metallic eyelets - Thermoformed insole - Reinforced template STEEL TOE - Electric Hazard, Slip Resistance - Hydrocarbon resistant sole - EVA midsole for better comfort - Numbers: 6 to 11 1/2

67 Product Catalogue PPE WELDING HELMETS INDURA by SPEEDGLASS

68 Product Welding Catalogue Helmets Indura PREMIUM WELDER NEW! Our Strongweld PREMIUM family of welding masks offers great value with outstanding protection at affordable prices. Available in two simple, attractive and professional designs. Strongweld PREMIUM masks offer protection, comfort and outstanding performance with exceptional durability. They have custom adjustment for sensibility and delay as well as weld and grind modes. Low battery sensors alert the welder when batteries are low. Dark shades from 8 to 12 and clear shade number 3 allow for most indoor and outdoor uses in a wide variety of process: SMAW, GMAW and GTAW over 10A. Indura PREMIUM FLAME Norm Classification Darkening Speed Dark to clear time UV/IR Protection Visual field Clear state Dark state ANSI Z /2/2/3 73F (23C) 100ms (fast mode) 200ms (slow mode) Permanent shade #12 44x93 mm (1.73x3.66 in) Shade # 3 Shades 8 to 12

69 Product Welding Catalogue Helmets Indura CLASSIC An affordable auto-darkening thermoplastic welding helmet with photo-sensors and auto-tone regulation from 9 to 13. Protective polycarbonate. For welding process over 40Amp. Solar powered batteries. Exceeds DIN EN 379. Visual field UV/IR Protection Clear State Dark State Reaction Time: clear to dark Dark to clear time 98mmx44mm 3.8inx1.7in Permanent tone, DIN 16 DIN 4 Variable tone, DIN 9 to Seconds sec (fast mode) sec (slow mode) Indura VINTAGE ACCESORIES

70 Product Catalogue PPE PROTECTIVE CLOTHING by GARMENDIA an INDURA company

71 WELDING GLOVES AT-19 Product Protective Catalogue Clothing WELDER GLOVES RED - Long glove - Orange raw-leather with linen - Great tear resistance - Side and inter-finger stitch protection - Denim fist linen - Kevlar stitches - Designed for welding work - Short glove - Red raw-leather with linen - Great tear resistance - Side and inter-finger stitch protection - Denim fist linen - Coated polyester stitches - Designed for welding work WELDING GLOVES KC-96 WELDING GLOVES CN-37 - Orange raw-leather - Great tear resistance - Side and inter-finger stitch protection - Denim fist linen - Coated polyester stitches - Designed for welding work - Natural raw-leather - Great tear resistance - Side and inter-finger stitch protection - Denim fist linen - Coated polyester stitches - Designed for welding work

72 SUEDE TIG GLOVES Product Protective Catalogue Clothing LEATHER-CANVAS COMBO - Suede leather with raw-leather fist - Great adjustment and flexibility - Ideal for TIG welding - Raw leather palm -Canvas reinforcement in critical areas - For general service RAW LEATHER GLOVES REINFORCED RAW LEATHER - 100% reinforced raw-leather - For general use - 100% reinforced raw-leather - Natural uncolored leather - Palm reinforced - Stitch free back of the hand

73 SHORT COMBO GLOVES Product Protective Catalogue Clothing RANGER COMBO GLOVES - 100% reinforced raw-leather - Combo colored raw-leather - Leather reinforced palm - Reinforced inner and outer stitch - Metal mechanic and construction - 100% reinforced raw-leather - Natural uncolored leather - Palm reinforced - Stitch free back of the hand SUEDE GLOVES w/lining SUEDE GLOVES PLAIN - Certified PO goatskin - Natural lining with elastic fist - Several colors available - Ideal for TIG welders - Driving heavy equipment - Certified PO goatskin - Natural lining with elastic fist - Natural uncolored leather - Ideal for TIG welders - Driving heavy equipment

74 SHORT REINFORCED LEATHER Product Protective Catalogue Clothing TAN LEATHER w/lining - 100% reinforced leather - Metal mechanic and construction - Certified PO goatskin - Natural lining with elastic fist - Tan colored - Ideal for TIG welders - Driving heavy equipment REINFORCED MULTIPURPOUSE RETAIL DISPLAY OPTIONS - Orange-blue raw-leather - Great tear resistance - Side and inter-finger stitch protection - Denim fist linen, reinforced palm - Coated polyester stitches - Designed for welding work

75 RAW LEATHER WELDER JACKET Product Protective Catalogue Clothing RAW LEATHER WELDER PANTS - 100% cow raw-leather - Chromium tanned mm - Double reinforced stitches - Velcro by the front - Smooth finishing - Raglan sleeve for better comfort - 100% cow raw-leather - Chromium tanned mm - Double reinforced stitches - Velcro by the front - Smooth finishing - Pocket free RAW LEATHER WELDER APRON RAW LEATHER WELDER GAITER - 100% cow raw-leather - Chromium tanned mm - Double reinforced stitches - 100% cow raw-leather - Chromium tanned mm - Double reinforced stitches

76 LEATHER WELDER JACKET Product Protective Catalogue Clothing LEATHER WELDER PANTS - 100% natural leather - Chromium tanned mm - Double reinforced stitches - Velcro by the front - Smooth finishing - Raglan sleeve for better comfort - 100% natural leather - Chromium tanned mm - Double reinforced stitches - Velcro by the front - Smooth finishing - Pocket free LEATHER WELDER APRON LEATHER WELDER GAITER - 100% natural leather - Chromium tanned mm - Double reinforced stitches - 100% natural leather - Chromium tanned mm - Double reinforced stitches

77 ATACAMA ANTI-FOG Product Safety Catalogue Glasses ANTARCTIC GRAY ASPEN POLICARBONATE PATRIOT 3000

78 ASTROSPEC 3001 Product Safety Catalogue Glasses NEW EDGE ANTIFOG TATIO TORNADO All our safety glasses are made with high-resistance polycarbonate providing 99.9% UV protection and excellent peripheral protection.

79 Product Catalogue INDUSTRIAL SUPPLIES ABRASIVES INDURA by SAINT GOBAIN

80 MILD STEEL CUTTING DC/FC Product Abrasive Catalogue Discs STAINLESS STEEL CUTTING DC/FC Description: steel depressed or flap-type cut-off wheels. Fast cut. Reduce burr formation and heat generation during the process. Excellent durability. Description: stainless steel depressed or flap-type cut-off wheels. Fast cut. Reduce burr formation and heat generation during the process. Excellent durability. Typical Applications: structural steel cutting, general repairs, piece cut-off during assembly. Typical Applications: stainless steel cut-off, general repairs, piece cut-off during assembly. Depressed Center Type Flat Center Type Depressed Center Type Flat Center Tye 4 ½, 7 & 9 in 4 ½, 7, 9 & 12 in 4 ½ in 7 & 9 in HEAVY DUTY CUTTING WHEEL HIGH QUALITY MILD STEEL CUTTING Description: heavy-duty depressed center cut-off wheel. These wheels are made using two grain types: Seeded Gel (SG) grain ceramic abrasive and conventional aluminum oxide with a last generation adhesive, providing high performance and extended durability that set it apart. Description: flap-type steel cut-off wheel of extreme performance and durability. The patented grain technology sets it apart from conventional wheels and boosts its attributes. Typical Applications: carbon steel or stainless steel plates, profiles, tubes and bars. Diameters: 4 ½, 7 and 9 inches Typical Applications: stainless steel cut-off, high resistance steel cut-off reducing heat generation, structural steels. Diameters: 4 ½, 7, 9 & 14 inches

81 HIGH QUALITY SS CUTTING Product Abrasive Catalogue Discs ALL STEEL HQ Strongweld CUTTING Description: high performance flap cut-off wheel of fast cut which reduces burr formation and heat generation. Its exclusive grain formulation enhances its characteristics and extend its life while minimizing your operational costs. Description: high speed flap cut-off wheel. Designed for high speed and performance. It does not contaminate stainless steel due to its low chlorine, sulfur and iron contents. Minimum waste Typical Applications: stainless steel plates and pieces, high resistance steel while reducing heat generation. Typical Applications: carbon steel, stainless steel and others. Plates, profiles, bars and tubes. Softer cuts without burning the piece. Fast cut-off. Diameters: 4 ½, 7 and 9 inches Diameters: 4 ½, & 7 inches GRINDING ALL STEEL CUTTING MILD STEEL GRINDING Description: The original Saint-Gobain high speed flap cut-off wheel. Designed for high speed and performance. It does not contaminate stainless steel due to its low chlorine, sulfur and iron contents. Minimum waste Description: depressed center grinding wheel. Fast stock removal. Low heat production. Extended operating life. Reduce operational costs. Typical Applications: carbon steel, stainless steel and others. Plates, profiles, bars and tubes. Softer cuts without burning the piece. Fast cut-off. Typical Applications: structural steel grinding, finishing foundry pieces, weld cord grinding, metallic pieces grinding, high resistance steel grinding. Diameters: 4 ½, 7 & 9 inches Diameters: 4 ½, 7 & 9 inches

82 Strongweld HIGH QUALITY GRINDING Product Abrasive Catalogue Discs STAINLESS STEEL GRINDING Description: high performance depressed center grinding wheel. Fast stock removal. Low heat generation. Outstanding operating life. Description: depressed center grinding wheel. Faster stock removal per hour. Low heat generation. Extended life. Typical Applications: structural steel grinding, foundry pieces finishing, weld cord grinding, stainless steel cut-off, high resistance steel cut-off. Typical Applications: structural steel grinding, foundry piece finishing, weld cord grinding, stainless steel cutoff, high resistance steel cut-off. Diameters: 4 ½, 7 and 9 inches Diameters: 4 ½, 7 & 9 inches MULTIUSE Strongweld HQ HEAVY DUTY DEBURRING WHEEL Description: Multi-use depressed center wheel. From cut-off to finish not needing to change tool or wheel. Composed of three glass fiber layers that reinforced the disc for safer operation and improved strength. All-in-one cut-ff, grinding and sanding. Highly reinforced. Typical Applications: carbon steel and stainless steel. 90 degrees cut-off, 30 degrees grinding and 15 degrees finishing. Diameters: 4 ½ inches Description: Zirconium-aluminum conical grinding wheel. For grinding, deburring, blending and finishing; offering long life and consistent high quality finish. Typical Applications: stainless steel, aluminum, ferrous metals, non-ferrous metals, weld cord grinding, burr elimination (rough edge reduction), rust removal and cleaning. Diameters: 4 ½ in (40ZA, 50ZA, 60ZA, 80ZA & 120ZA) and 7 in (40 ZA, 60 ZA & 80 ZA)

83 CONTINUOUS DIAMOND WHEEL Product Abrasive Catalogue Discs TURBO DIAMOND WHEEL Description: Elastic steel body, crown composed of high-resistance metallic alloy with diamond particles in several layers, once a layer is wear, a new one appears to continue working. More abrasive layers and more diamond content than conventional discs. Dry and cold cutting. Description: Elastic steel body, crown composed of high-resistance metallic alloy with diamond particles in several layers, once a layer is wear, a new one appears to continue working. More abrasive layers and more diamond content than conventional discs. Dry and cold cutting. Typical Applications: ceramic tiles, porcelain tiles. Diameters: 4 ½ inches Typical Applications: marble, granite, decorative stones. Diameters: 4 ½, 7 & 9 inches SEGMENTED DIAMOND WHEEL Description: Elastic steel body, crown composed of high-resistance metallic alloy with diamond particles in several layers, once a layer is wear, a new one appears to continue working. More abrasive layers and more diamond content than conventional discs. Dry and cold cutting. Typical Applications: concrete, bricks, roof tiles, drywalls, wood. Diameters: 4 ½, 7 & 9 inches

84 Product Catalogue INDUSTRIAL SUPPLIES PNEUMATIC TOOLS INDURA by NU AIR (ITALY)

85 PNEUMATIC IMPACT WRENCH KIT 2 HP 100 Lt Product Pneumatic Catalogue Tools PNEUMATIC RATCHET WRENCH 2 HP 100 Lt Description: ½in pneumatic air impact wrench, ½ in extension bar, ¼ NPT air inlet, 5/32 Allen head wrench, pneumatic oil, 10-piece socket set (9, 10, 11, 13, 14, 17, 19, 22, 24 & 27 mm) Description: ½in pneumatic ratchet wrench, ¼ NPT air inlet. Transportation case included Ideal for low-torque difficult access work. IMPACT AND RATCHET WRENCH KIT HIGH POWER IMPACT WRENCH 2 HP 100 Lt 2 HP 100 Lt Description: ½in air impact wrench, ½ in air ratchet wrench, filter, two ¼ NPT air inlets, 5/32 Allen head wrench, lubricant oil, 10-piece socket set (9, 10, 11, 13, 14, 17, 19, 22, 24 & 27 mm) Description: ½in pneumatic professional impact wrench, ¼ NPT air inlet. Transportation case included Designed for heavy-duty applications at shops.

86 PNEUMATIC DRILL Product Pneumatic Catalogue Tools PNEUMATIC NAILER KIT 3 HP 100 Lt 2 HP 100 Lt Description: 3/8in pneumatic drill, one chuck wrench, ¼ NPT air inlet. For soft wood and steel Description: air nailer, 5/32 & 3mm Allen head wrench, safety goggles, pneumatic oil. Transportation case included PNEUMATIC HAMMER KIT STRAIGHT DIE GRINDER KIT 2 HP 100 Lt 2 HP 100 Lt Description: air hammer kit, quick change retainer, ¼ NPT air inlet, five chisels 17.5cm Transportation case included Description: ½in air straight die-grinder, five ¼ stones, 5 1/8 stones, ¼ NPT air inlet, two manual torques, 1/8 and ¼ spindle collars Transportation case included

87 PNEUMATIC STRAIGHT CUT-OFF Product Pneumatic Catalogue Tools PNEUMATIC ORBITAL SANDER 2 HP 100 Lt 3 HP 100 Lt Description: 3in pneumatic straight cut-off, 5/32 Allen head wrench, ¼ NPT air inlet. Description: pneumatic orbital sander, ¼ NPT air inlet. For aluminum, plastic fiber, thin steel, screws and bolts. For automotive, carpentry and cabinetry works PNEUMATIC AIRBRUSH (AEROGRAPH) KIT 1.5 HP 25 Lt CONVENTIONAL SPRAY GUN 3 HP 100 Lt Description: one airbrush or aerograph, siphon bottle, siphon cup, air hose, ¼ air inlet, metal airbrush holder, fluid cup Automotive art, tattoos, graphic art. Description: conventional gravity spray gun, brushes, ¼ double air outlet, filter, pin. Automotive and small surface painting

88 HIGH PRESSURE SPRAY GUN Product Pneumatic Catalogue Tools HURACAN AIR TOOL PACKAGE 1.5 HP 25 Lt Description: high pressure air spray gun, cleaning brush. A complete compressor painting kit For automotive and large surface painting. ACCESORIES AIR FILTER AIR REGULATOR AIR FILTER & REGULATOR AIR REGULATOR FILTER OILER ACCESORIES KIT CONNECTOR KIT

89 Product Air Catalogue Compressors VENTO 1000 Spray gun, air gun, washer gun, 15ft hose and tire inflator included VENTO 2000 Spray gun, air gun, washer gun, 15ft hose and tire inflator included Input Power 120v 1Ph 60Hz 220v 1Ph 50Hz Input Power 120v 1Ph 60Hz 220v 1Ph 50Hz Max Air Flow 115 Lt/min 4 CFM Max Air Flow Output 135 Lt/min 4.75 CFM Tank Capacity 24 Lt / 6.3 Gal Tank Capacity 24 Lt / 6.3 Gal Max Pressure 8 BAR / 116 psi Max Pressure 8 BAR / 116 psi Maximum Power 1.1Kva / 1.5HP Maximum Power 1.5Kva / 2HP Dimensions mm (H x W x D) 255x580x595 Dimensions mm (H x W x D) 255x580x600 Weight (Kg) 14.5 Weight (Kg) 22 HURACAN 1520 Spray gun, air gun, washer gun, 15ft hose and tire inflator included HURACAN 2000 Input Power Max Air Flow Output Tank Capacity 120v 1Ph 60Hz 220v 1Ph 50Hz 135 Lt/min 4.75 CFM 50 Lt / 13.2 Gal Input Power Max Air Flow Output Tank Capacity 220v 1Ph 60Hz 190 Lt/min 6.7 CFM 100 Lt 26.4 Gal Max Pressure 8 BAR / 116 psi Max Pressure 9 BAR / 131 psi Maximum Power 1.5Kva / 2HP Maximum Power 1.5Kva / 2HP Dimensions mm (H x W x D) 320x660x820 Dimensions mm (H x W x D) 390x765x1060 Weight (Kg) 29 Weight (Kg) 66

90 HURACAN 3000 Product Air Catalogue Compressors TIFON 4000 Input Power 220v 1Ph 60Hz Max Air Flow 240 Lt/min 4 CFM Input Power 440v 3Ph 60Hz Tank Capacity 100 Lt Gal Max Air Flow 320 Lt/min 11.3 CFM Max Pressure Maximum Power 9 BAR / 131 psi 2.5Kva / 3HP Tank Capacity 200 Lt Gal Dimensions mm (H x W x D) 400x780x1060 Max Pressure 10 BAR 145 psi Weight (Kg) 69.5 Maximum Power 3.7Kva / 4HP TIFON 5500 TIFON 7500 Input Power 440v 3Ph 60Hz Input Power 440v 3Ph 60Hz Max Air Flow 465 Lt/min 16.4 CFM Max Air Flow 602 Lt/min 21.5 CFM Tank Capacity 270 Lt 71.3 Gal Tank Capacity 270 Lt 71.3 Gal Max Pressure 10 BAR 152 psi Max Pressure 10 BAR 152 psi Maximum Power 5.1Kva / 5.5HP Maximum Power 7Kva / 7.5HP

91 TIFON Product Air Catalogue Compressors CICLON 7500 Input Power 440v 3Ph 60Hz Input Power Max Air Flow Tank Capacity Max Pressure 440v 3Ph 60Hz 786 Lt/min 27.7 CFM 500 Lt 132 Gal 10 BAR 152 psi Max Air Flow Tank Capacity Max Pressure Maximum Power 820 Lt/min 28.9 CFM 200 Lt Gal 8 BAR 116 psi 5.5Kva / 7.5HP Maximum Power 9.3Kva /10HP Weight 252Kg / 560Lb Dimensions 1460x540x1180 CICLON CICLON & CICLON Input Power 440v 3Ph 60Hz Input Power Max Air Flow 440v 3Ph 60Hz 950 Lt/min 33.6 CFM Max Air Flow Tank Capacity Lt/min CFM Lt Gal Tank Capacity 300 Lt 79.3 Gal Max Pressure 8-10 BAR psi Max Pressure 10 BAR 145 psi Maximum Power 11Kva / 15HP 15Kva / 20HP Maximum Power Dimensions 7.5Kva / 10HP 1460x540x1250 Dimensions 1460x630x x630x1430 Weight 257Kg / 570Lb Weight 365Kg / 811Lb 438Kg / 973Lb

92 Product Catalogue INDUSTRIAL SUPPLIES ELECTRIC TOOLS Strongweld by EINHELL Gmbh German Engineering

93 HAMMER DRILL T Product Electric Catalogue Tools HAMMER DRILL T No Load Speed: RPM Chuck Size: ½ inch Weight: 4.2lb Power : 650W Cord Length: 10ft No Load Speed: RPM Chuck Size: ½ inch Weight: 5.8lb Power : 750W Cord Length: 10ft HAMMER DRILL T ANGLE GRINDER A4-600 No Load Speed: / RPM Chuck Size: ½ inch Weight: 7.9lb Power : 1050W Cord Length: 10ft No Load Speed: RPM Disc Diameter: 4½ inch Weight: 4.4lb Power : 600W Cord Length: 10ft

94 Product Electric Catalogue Tools ANGLE GRINDER A ANGLE GRINDER A No Load Speed: RPM Disc Diameter: 4½ inch Weight: 5.3lb Power : 1010W Cord Length: 10ft No Load Speed: 8000 RPM Disc Diameter: 7 inch Weight: 12.5lb Power : 2300W Cord Length: 10ft OUTSTANDING RETAIL PRESENTATION: