CERACOAT SPORTS CAR CARE

Transcription

1 CERACOAT SPORTS CAR CARE SPECIFICATION SHEET: For all vehicle-body, rims and (metal, light alloy, chrome, smoothplastic, kevlar, carbon, gelcoat( car - truck - caravan - bike - motorbike - boat - plane - helmets) against all kind of influences.

2 Grease Liquids Dirt Rust Bacteria UV Rays Anti Scratch Ceracoat Ceramic Super Car Care: These coatings were designed to enable smooth, glass-like surfaces to have less contact withdirt particles. The hydro- and oleo phobic efects cause particles of contamination such as grease, oil, lime and materials from environmental pollution to adhere less to the substrates, and allow them to be easily removed from the coating, i.e. without applying abrasive agents or cleaning products ("Easy-clean" efect), and has anti-finger-print properties. Example of uses Automotive body (metal) Chrome Copper Wheels Carbon fiber Product characteristics Strong hydrophobic + oleo phobic properties Strong non-stick properties - anti-finger-print properties Excellent easy-clean performance on contamination and lime-scale Food safe (inert) - «cleaner+renovator+coating+protectant» all-in-one Other properties Invisible to the human eye (coating thickness: nm) Permanent (UV-stable, enormous abrasion resistance) Resistant to temperature change, breathable, anti-bacteria properties Simple application (do-it-yourself) Chemical resistant

3 Application: Simple do-it-yourself application makes it suitable for end-customers as well: 1.Clean the body first, make sure there is no water or dirt (claying body with clay mitt will get you a professional finish) 2. Apply the Ceracoat Sports Car Care@ to the body with a clean cloth ot cotton untill you see a white matte film on the surface. 3.Leave the white matte film dry for 2-5 min 4. With a clean cloth wipe the white matt film off 5. Wait 24 hours before any contact with water 6. Please apply the coating a on surface below 30 degrees.

4 as good as new (below 1 year) slightly used (1-5 years) used (5-10 years) heavily used (10 years+) substrate table SEM-surface view before application 30µm SEM-surface view polished and sealed surface after application Advantages compared to competitive products Permanence and longevity: The UV-stability enables functionality for a number of years, approximately the lifetime of the coated surface (about 1 year if constant contact with water like in a lavabo) Many competitive products are slowly destroyed by sunlight and cleaning. Abrasion resistant, easy-to-clean efect A permanent chemical bond with the substrate enables an excellent abrasion resistance. Many competitive products can be easily removed by abrasion. Chemical stability The product is resistant to almost all standard household and industrial cleaners. Many competitive products must be reapplied after cleaning the surface. IMPORTANT NOTICE: Our explanations correspond to our current knowledge and experience. The right to makealterations within the framework of technical advances and operational development isreserved. The customer is not released from careful product application. We guarantee the quality of our products in accordance with our general sales conditions as a matter of course. The products are ready-to-use.

5 Steps to applying professionally 1. application only with a rotating polishing machine 2. do not apply at temperatures beyond 5 C and + 30 C, not in the sun or rain 3. pay attention to use clean (new) polishing pads 4. car has to be completely clean and dry 5. by using polishing machine, do press normal and not to strong 6. 1) do the application in circular (8) movements, then wait 10 minutes 7. 2) then you use another clean pad and polish the film away to get a smooth and shiny surface. 3) Then you can polish again with a smooth towel to have a shiny and regular surface and to take away rests of the remaining powder 8. for information: you will use about ml per normal car (Golf, Mercedes A, Audi A3) 9. the professional vehicle care nano coating will be hardened after 1 h but completely ready to be exposed to rain etc. after 24 h Ceracoat Nano Wax on coating If you additionally use the nano Wax on the coating: Please use a polishing machine with a medium strength patch. apply evenly with light pressure and medium speed on the surface. The nano wax requires a reaction time of 10 min. Then use the polishing machine with fine polishing patch and polish the nano wax. If you do not use polishing machine, do the job with a sponge. Then polishing the excess nano wax with a clean, soft cloth with circular movements. In order to achieve the desired deep shine, polish the final surface with a smooth towel. After application, the surfaces needs 24 hours to be ready. It should not be cleaned mechanically or chemically before.

6

7 Contact Ceracoat Ceramic Switzerland Kuwait Office to register to the program via on or by telephone Address: Level 18 Sahab Tower Salhiya Kuwait Kuwait City Website: E-commerse: soon All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission requests, write to the publisher, addressed Attention: Permissions Coordinator, at the address below. First Floor, BCI House, Avarua, Rarotonga, Cook Islands