Z-006-DN-5L-F06BK/D

Transcription

1 LazrSPEED Indoor/Outdoor Low Smoke Zero Halogen Single Jacket All- Dielectric Arid-Core Drop Cable Product Classification Portfolio Product Type Regional Availability CommScope Fiber drop cable Asia Australia/New Zealand EMEA Latin America North America Standards And Qualifications EN50575 CPR Cable EuroClass Dca s2 d1 a1 Cable Qualification Standards ANSI/ICEA S Representative Image General Specifications Cable Type Construction Type Subunit Type Riser rated low smoke Non-armored Gel-filled Construction Materials Fiber Type Solution OM3, LazrSPEED 300 page 1 of 5

2 Jacket Material PE Total Fiber Count 6 Fiber Type OM3, LazrSPEED 300 Fiber Type, quantity 6 Fibers per Subunit, quantity 6 Jacket Color Black Jacket UV Resistance UV stabilized Dimensions Buffer Tube/Subunit Diameter 4.00 mm 0.16 in Cable Weight 48.0 lb/kft 72.0 kg/km Diameter Over Jacket 8.30 mm 0.33 in Subunit, quantity 1 Physical Specifications Minimum Bend Radius, loaded 12.5 cm 4.9 in Minimum Bend Radius, unloaded 8.3 cm 3.3 in Tensile Load, long term, maximum 400 N 90 lbf Tensile Load, short term, maximum 1334 N 300 lbf Vertical Rise, maximum m ft Flame Test Specifications Flame Test Listing NEC OFNR-LS (ETL) and c(etl) Flame Test Method IEC IEC IEC IEEE 383 UL 1666 UL 1685 Environmental Specifications Environmental Space Aerial, lashed Buried Low Smoke Zero Halogen (LSZH) Riser Installation Temperature -20 C to +60 C (-4 F to +140 F) Operating Temperature -20 C to +70 C (-4 F to +158 F) Storage Temperature -40 C to +75 C (-40 F to +167 F) Mechanical Test Specifications Compression 10 N/mm 57 lb/in Compression Test Method FOTP-41 IEC E3 Flex 35 cycles Flex Test Method FOTP-104 IEC E6 Impact 2.17 ft lb 2.94 N-m Impact Test Method FOTP-25 IEC E4 page 2 of 5

3 Strain Strain Test Method Twist Twist Test Method Water Penentration Water Penentration Test Method See long and short term tensile loads FOTP-33 IEC E1 10 cycles FOTP-85 IEC E7 24 h FOTP-82 IEC F5 Environmental Test Specifications Cable Freeze -2 C 28 F Cable Freeze Test Method FOTP-98 IEC F15 Drip 70 C 158 F Drip Test Method FOTP-81 IEC E14 Heat Age Test Method IEC F9 Low High Bend -20 C to +60 C (-4 F to +140 F) Low High Bend Test Method FOTP-37 IEC E11 Temperature Cycle -20 C to +70 C (-4 F to +158 F) Temperature Cycle Test Method FOTP-3 IEC F1 Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system CENELEC EN compliant, Declaration of Performance (DoP) available Included Products CS-5L-LTLT (Product Component not not orderable) LazrSPEED 300 OM3 Bend-Insensitive Multimode Fiber * Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable page 3 of 5

4 CS-5L-LT CS-5L-LT LazrSPEED 300 OM3 Bend-Insensitive Multimode Fiber Product Classification Portfolio Product Type Regional Availability CommScope Optical fiber Asia Australia/New Zealand EMEA Latin America North America Optical Specifications, Wavelength Specific Standards Compliance Attenuation, maximum Differential Mode Delay Note Index of Refraction TIA-492AAAC (OM3) nm nm Superior to TIA-492AAAC and IEC at 850 nm 1300 nm 850 nm 1 Gbps Ethernet Distance nm nm 10 Gbps Ethernet Distance nm nm Bandwidth, Laser, minimum Bandwidth, OFL, minimum Differential Mode Delay Backscatter Coefficient Physical Specifications Cladding Diameter µm Cladding Diameter Tolerance ±1.0 µm Cladding Non-Circularity, maximum 1.0 % Coating Diameter (Colored) 254 µm Coating Diameter (Uncolored) 245 µm Coating Diameter Tolerance (Colored) ±7 µm Coating Diameter Tolerance (Uncolored) ±10 µm Coating/Cladding Concentricity Error, maximum 12 µm Core Diameter 50.0 µm Core Diameter Tolerance ±2.5 µm Core/Clad Offset, maximum 1.5 µm nm nm nm nm nm nm nm nm page 4 of 5 most current information. Revised: December 13, 2017

5 CS-5L-LT CS-5L-LT Optical Specifications, General Numerical Aperture Numerical Aperture Tolerance ±0.015 Point Defects, maximum Zero Dispersion Slope, maximum Zero Dispersion Wavelength, maximum Zero Dispersion Wavelength, minimum Mechanical Specifications Coating Strip Force, maximum Coating Strip Force, minimum Dynamic Fatigue Parameter, minimum 18 Macrobending, 15 mm mandrel, 2 turns Macrobending, 30 mm mandrel, 2 turns Macrobending, 75 mm mandrel, 100 turns Proof Test Environmental Specifications Regulatory Compliance/Certifications * Footnotes 0.15 db ps/[km-nm-nm] 1316 nm 1297 nm 8.9 N 2.0 lbf 1.3 N 0.3 lbf nm nm nm nm nm nm N/mm² psi Heat Aging, maximum C Temperature Dependence, maximum Temperature Humidity Cycling, maximum 0.10 db/km 0.20 db/km Water Immersion, maximum C Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system Temperature Dependence, maximum Temperature dependence is conducted at -60 C to +85 C (-76 F to +185 F) Temperature Humidity Cycling, maximum Temperature humidity cycling is conducted at -10 C to +85 C (+14 F to +185 F) up to 95% relative humidity page 5 of 5 most current information. Revised: December 13, 2017