CARBIDE. Being the best through innovation NC-SPOTTING DRILLS NC-ANBOHRER. - CENTERING and CHAMFERING. - Zentrier & Abfasen

Transcription

1 Being the best through innovation NC-ANBOHRER - ING and CHAMFERING - Zentrier & Abfasen

2 SELECTION GUIDE SOLID CARBIDE For General materials, Cast steels, Cast iron, Non-ferrous materials SIZE ITEM MODEL DESCRIPTION PAGE MIN MAX D5306 D5307 CARBIDE, 90, 120 VOLLHARTMETALL NC-ANBOHRER 90, 120 D D 1 D5320 CARBIDE, 142 VOLLHARTMETALL NC-ANBOHRER 142 D3.0 D 125 RECOMMENDED CUTTING CONDITIONS EMPFOHLENE SCHNEIDKONDITIONEN 쪾 phone: , fax: , yg1@yg1.kr

3 SOLID CARBIDE : Excellent 쫛 : Good Carbon Alloy Prehardened Hardened Cast Iron Aluminum Stainless Titanium Mild Copper Bronze CFRP ~HB225 HB225~325 HRc30~45 HRc45~55 HRc55~ phone: , fax: , yg1@yg1.kr 쪾 123

4 HSS D5306 SERIES D5307 SERIES i- CARBIDE, -GENERAL VOLLHARTMETALL NC-ANBOHRER Application : For more precise centering work on NC/CNC machines. Verwendung : Auf NC-Maschinen, Lehrenbohrwerken u.a. The large diameter of the tool permits chamfering work kapitalintensiven Bohrwerken, zum Zentrieren und -INOX -ALU after centering continuously. Anfasen von Gewindebohrungen in einem Arbeitsgang. Besonders geeignet zum Anbohren von hochfesten Stählen, Stahlguß, Grauguß, Hartguß, Mangan-Hartstahl, CrNi-Stählen, Bronze, Leicht-und Buntmetallen. -CFRP -MQL TYPE for HARDENED GENERAL CARBIDE P.126 NC-Spotting drills 90 NC-Spotting drills 120 NC-Anbohrer 90 NC-Anbohrer 120 Unit : mm Drill Flute Overall Drill Flute Overall EDP No. Diameter EDP No. Diameter MULTI-1 D D D D D D D53060 D53080 D D D D TiN(D6306, D6307), TiCN(DG306, DG307) and TiAlN(DH306, DH307) are available on your request. HPD GOLD-P STRAIGHT TAPER SPADE : Excellent 쫛 : Good TECHNICAL DATA Carbon Alloy Prehardened Hardened Cast Iron Aluminum Stainless Titanium Mild Copper Bronze CFRP ~HB225 HB225~325 HRc30~45 HRc45~55 HRc55~ 1쪾 phone: , fax: , yg1@yg1.kr

5 HSS D5320 SERIES i- CARBIDE, VOLLHARTMETALL NC-ANBOHRER Application : For more precise centering work on NC/CNC machines. Verwendung : Auf NC-Maschinen, Lehrenbohrwerken u.a. The large diameter of the tool permits chamfering work kapitalintensiven Bohrwerken, zum Zentrieren und -GENERAL after centering continuously. Anfasen von Gewindebohrungen in einem Arbeitsgang. Besonders geeignet zum Anbohren von hochfesten Stählen, Stahlguß, Grauguß, Hartguß, Mangan-Hartstahl, CrNi-Stählen, Bronze, Leicht-und Buntmetallen. -INOX -ALU -CFRP -MQL TYPE for HARDENED 142 P.126 GENERAL NC-Spotting drills 142 NC-Anbohrer 142 Unit : mm CARBIDE Drill Flute Overall EDP No. Diameter D D D53200 D D D D D D MULTI-1 HPD GOLD-P STRAIGHT TAPER : Excellent 쫛 : Good SPADE Carbon Alloy Prehardened Hardened Cast Iron Aluminum Stainless Titanium Mild Copper Bronze CFRP TECHNICAL DATA ~HB225 HB225~325 HRc30~45 HRc45~55 HRc55~ phone: , fax: , yg1@yg1.kr 쪾 125

6 HSS RECOMMENDED CUTTING CONDITIONS EMPFOHLENE SCHNEIDKONDITIONEN i- -GENERAL CARBIDE NC - SPOTTING 90, 120, 142 with FLATTED VOLLHARTMETALL NC-ANBOHRER 90, 120, 142 mit MITNAHME FLÄCHE D5306, D5307, D5320 SERIES -INOX WORK MATERIAL NON-ALLOY ALLOY SOFT GREY CAST IRON HARD GREY CAST IRON STAINLESS Al-Si ALLOYS, Si<10% Al-Si ALLOYS, Si>10% Ti, Ni ALLOY -ALU STRENGTH DRILLING SPEED < 0 N/mm 2 < 1000 N/mm 2 < HB0, GG25 < HB300, GG40 65 ~ 75 m/min 45 ~ 55 m/min 90 ~ 100 m/min 65 ~ 75 m/min 35 ~ 40 m/min 145 ~ 165 m/min 115 ~ 5 m/min 35 ~ 40 m/min -CFRP -MQL TYPE for HARDENED DIAMETER N S N S N S N S N S N S N S N S N = R.P.M S = Feed per Revolution (mm/rev.) GENERAL CARBIDE MULTI-1 HPD GOLD-P STRAIGHT TAPER SPADE TECHNICAL DATA 126쪾 phone: , fax: , yg1@yg1.kr