Product list PRODUCT CATEGORIES ACCEPTED AT THE EVENT

Transcription

1 PRODUCT CATEGORIES ACCEPTED AT THE EVENT A) Producers, distributors, traders, service centres, agents, purchase groups and users of the following products: 1. Iron ores and derivatives 1.1. Magnetite 1.2. Hematite 1.3. Limonite 1.4. Oligist 1.5. Iron pyrite 1.6. Marcasite 1.7. Magnetic pyrite 1.8. Iron carbonate 1.9. Siderite Hydrated iron oxide Ferruginous sands Mixed iron oxides Washed iron ore Sintered iron ore Calcined iron ore Treated iron ore Concentrated iron ore Pelletized iron ore Processed iron ore Ferrous products obtained by direct reduction of iron ore Direct-reduced iron (sponge iron) 2. Iron alloys 2.1. Ferromanganese 2.2. Ferrosilicon 2.3. Ferro-silico-manganese 2.4. Ferrochrome 2.5. Ferro-silico-chrome 2.6. Ferro-nickel 2.7. Ferro-molybdenum 2.8. Ferro-tungsten and ferro-silico-tungsten 2.9. Ferro-titanium and ferro-silico-titanium Ferro-vanadium Ferro-niobium Ferro-phosphorus Ferro-silico-magnesium Other

2 3. Cast iron 4. Refractory Materials 5. Waste and scrap of cast iron, iron or steel 6. Ingots 7. Semi-finished products of iron or steel (billets, slabs, blooms) 8. Wire rod 9. Bars 3.1. Non-alloy pig iron containing by weight 0.5% or less of phosphorous 3.2. Non-alloy pig iron containing by weight more than 0.5% of phosphorous 3.3. Alloy pig iron 3.4. Spiegeleisen 5.1. Waste and scrap of cast iron 5.2. Waste and scrap of alloy steel (of stainless steel and other) 5.3. Waste and scrap of tinned iron and steel 5.4. Turnings, shavings, chips, milling waste, sawdust, fillings, trimmings and stampings, whether or not in bundles 5.5. Scrap ingots 5.6. Granules and powders of pig iron, iron and steel 6.1. Steel ingots containing carbon 6.2. Stainless steel ingots 6.3. Alloy steel ingots 7.1. Semi-finished products of iron or carbon steel containing by weight less than 0.25% of carbon 7.2. Semi-finished products of iron or carbon steel containing by weight 0.25% or more of carbon 7.3. Semi-finished products of stainless steel 7.4. Semi-finished products of other alloys 8.1. Wire rod in iron or carbon steel 8.2. Wire rod in stainless steel 8.3. Wire rod in other alloy steel 9.1. Bars of iron or carbon steel, forged 9.2. Bars or iron or carbon steel containing indentations, grooves or ribs (round for rein forced concrete) 9.3. Bars of iron of free-cutting steel, cold-formed or cold-finished 9.4. Bars of stainless steel 9.5. Bars of other alloy steel 9.6. Punched bars for drilling 9.7. Bars of iron or steel hot rolled, hot-drawn or hot-extruded 9.8. Bars of iron or steel forged

3 10. Flat-rolled products Hot-rolled flat-rolled products of iron, carbon steel or silicon-electrical steel, of a width of 600 mm or more, in coils Hot-rolled flat-rolled products of iron, carbon steel or silicon-electrical steel, of a width of 600 mm or more, not in coils (plates) Hot-rolled flat-rolled products of stainless steel, of a width of 600 mm or more, in coils Hot-rolled flat-rolled products of stainless steel, of a width of 600 mm or more, not in coils (plates) Hot-rolled flat-rolled products of other alloy steel, in coils Hot-rolled flat-rolled products of other alloy steel, not in coils Cold-rolled flat-rolled products of iron, carbon steel or silicon-electrical steel, of a width of 600 mm or more, in coils Cold-rolled flat-rolled products of iron, carbon steel or silicon-electrical steel, of a width of 600 mm or more, not in coils (plates) Cold-rolled flat-rolled products of stainless steel of a width of 600 mm or more Cold-rolled flat-rolled products of other alloy steel of a width of 600 mm or more Flat-rolled products of iron, carbon steel of a width of 600 mm or more, plated or coated Flat-rolled products of iron or carbon steel or silicon-electrical steel, of a width of less than 600 mm (strips) Flat-rolled products of stainless steel, of a width of less than 600 mm (strips) Flat-rolled products of other alloy steel of a width of less than 600 mm Flat-rolled products of iron or carbon steel of a width of less than 600 mm, plated or coated 11. Sections U sections of iron or carbon steel (beams) I sections of iron or carbon steel H sections of iron or carbon steel L sections of iron or carbon steel T sections of iron or carbon steel Other sections of iron or carbon steel, hot-ralled or extruded Other sections, cold-rolled or finished Stainless steel sections Other alloy steel sections 12. Wires Wires of iron or carbon steel Zinc coated wires Wires of iron plated or coated with copper or other base metals Stainless steel wires Wires of other alloy steel

4 13. Forged semi-finished products From open-die forging From closed dies 14. Railway track construction material Rails Switch blades, crossing frogs, point rods and other crossing pieces Sleepers (cross-ties) and sole plates Other 15. Tubes and pipes Tubes, pipes and hollow profiles of cast iron Tubes, pipes and hollow profiles, seamless, of iron or carbon steel Tubes, pipes and hollow profiles, seamless, of stainless steel Tubes and pipes, seamless, drill pipes, of a kind used in drilling for oil or gas Tubes and pipes, seamless, of other alloy steel Welded or riveted tubes and pipes, of iron or steel, used for oil or gas pipelines used for pipelines Welded tubes and casings of iron or steel, used in drilling for oil or gas Other welded tubes and pipes of iron or steel Welded tubes and pipes of stainless steel Welded tubes of alloy steel Welded tubes and pipes, having non-circular section (square or rectangular) Welded tubes and pipes, having non-circular section (other than square or rectangular) 16. Tube and pipe fittings Cast fittings Iron and carbon steel fittings Stainless steel fittings Flanges Elbows, bends and sleeves Butt welding fittings 17. Steel products Sheet piling of iron or steel Welded angles, shapes and sections, of iron or steel Stranded wire, ropes, plainted bands, slings and the like of iron and steel Stranded wire, ropes, plainted bands, slings and the like of stainless steel Stranded wire, ropes, plainted bands, slings and the like of alloy steel Cables of iron and steel Grill, netting and fencing of iron and steel Screws, bolts, nuts, pins, washers, springs

5 B) Metal Working and Iron and Steel Mills: 1. Electric arc furnace 2. Induction furnace 3. Reheat furnace 4. Blast furnaces 5. Oxygen converters 6. Continuous casting machines 7. Electromagnetic stirrers 8. Shell molding 9. Ladles 10. Flat-rolling mills C) Handling systems for iron and steel products and environmental services: 1. Overhead cranes 2. Rail mounted gantry cranes 3. Endling device on rail and trucks 4. Wire brushes for environmental cleaning 5. Insulated panels for covering and/or insulation D) Service companies for industry firms: 1. Associations, Organizations 2. Research Centres 3. Training Centres 4. Consulting services 5. Media and Specialist journals 6. Economic and data banks 7. Internet, e-commerce 8. Banks and financial services 9. Design, calculation and simulation software 10. Transportation and logistics services 11. Equipment maintenance services 12. Other company services