PRODUCT INTRODUCTION FEATURES

Transcription

1

2 PRODUCT INTRODUCTION PRINCIPLE RF-Capacitance level Transmitter utilizes the capacitance formed between the sensing probe and the reference probe or the metal vessel wall to calculate the level of the liquid/medium inside the vessel according to the capacitance theory that the capacitance and vessel are proportional increased. When sensing probe and detected media are fixed, media dielectric constant (Kmedia) is normally bigger than air (Kair=1). Capacitnce for media (Cmedia) increases when liquid/ power/ solid level raise. EB prouduct detects media level by calculating capacitance inside the tank. Level FEATURES EB Series 4~0mA wire Loop power Low consumption of power (ma Max) High accuracy of linearity (< 1% FS) compensation, low temperature effect( 0.0% FS / C) Easy calibration (Any points for calibration) Wide measuring range for capacitance () No blind distance, ideal for different tanks. Suitable for high temperature, high pressure and corrosive environment. EB3 Series Dual protection prevents fog from damaging PCB. LCD indication is easy for observation from top. Power Supply: 1~36Vdc Photocoupler x Protective housing with high stability prevents from any damages during transportation, installation and operation. accuracy is not affected by temperature and pressure. Display range-1999~9999 EB600 Series Settings can be done directly with 3 buttons on the housing. 70 reversible direction for display. Easy wiring with quick connector. Easy installation with small product size. Inclined plane desige,lcd display is easy to be read. EB EB3 EB600 Recorder PB Series Bargraphic Display Panel Meter 4~0mA PM Series Digital Display Panel Meter 1

3 STANDARD TYPE 1/"NPT 1/"NPT 1/"NPT " 5kg/cm PP 5 3" 5kg/cm 10 PEEK PP 1.7 Suitable for big tank Media : non-conductive material low moisture material Suitable for big tank Media : non-conductive material low moisture material Suitable for middle/ small tank Media : non-conductive material low moisture material EB100 Wire Probe EB101 Hi-Temp Wire Probe EB00 Rod Probe Probe Material /316 Material CERAMIC CERAMIC -40~100 C -40~00 C -40~100 C Tensile Strength 000Kgf 000Kgf Voltage 1~36Vdc 1~36Vdc 1~36Vdc Output Current 4 ~0mA( two wire) 4 ~0mA( two wire) 4 ~0mA( two wire) 1%FS (5 C) 1%FS (5 C) 1%FS (5 C) 3"x5kg/cm flange or screw 3"x5kg/cm flange or screw 1"x5kg/cm flange or screw Approx. 3.7kg(1M) Approx. 4.kg(1M) Approx..3kg(1M) Pressure

4 STANDARD TYPE 1/"NPT 1/"NPT 1/"NPT PEEK 5 10 PP 100 M PEEK 1.7 Suitable for middle/ small tank Media : non-conductive material low moisture material 8 Suitable for non-conductive/ low moisture material and big tank.(weight can not be fixed at the bottom of tank) M5 Suitable for non-conductive/ low moisture material and big tank.(weight can not be fixed at the bottom of tank) EB01 Hi-Temp Rod Probe EB300 Wire Probe EB301 Hi-Temp Wire Probe Probe Material /316 Material -40~00 C -40~100 C -40~00 C Tensile Strength 000Kgf 000Kgf Voltage 1~36Vdc 1~36Vdc 1~36Vdc Output Current 4 ~0mA( two wire) 4 ~0mA( two wire) 4 ~0mA( two wire) 1%FS (5 C) 1%FS (5 C) 1%FS (5 C) 1"x5kg/cm flange or screw 1"x5kg/cm flange or screw 1"x5kg/cm flange or screw Approx..8kg(1M) Approx..3kg(1M) Approx..8kg(1M) Pressure 3

5 STANDARD TYPE 1/"NPT 1/"NPT 1/"NPT PP 150 M8 PTFE EB PVDF Coating EB PP Coating EB FEP Coating Suitable for conductive/ corrosive material and middle-size tank. EB400/0/30 Anti-Corrosion Suitable for conductive/ corrosive material and middle-size tank. EB431 Hi-temp Anti-Corrosion 8 EB PP Coating EB FEP Coating Suitable for conductive/ corrosive material and middle-size tank.(weight can not be fixed at the bottom of tank) EB50/30 Anti-Corrosion Wire Probe Probe Material +Coating +Coating +Coating Material +PTFE -40~100 C -40~00 C -40~100 C Tensile Strength 100Kgf Voltage 1~36Vdc 1~36Vdc 1~36Vdc Output Current 4 ~0mA( two wire) 4 ~0mA( two wire) 4 ~0mA( two wire) 1%FS (5 C) 1%FS (5 C) 1%FS (5 C) 1"x5kg/cm flange 1"x5kg/cm flange 1"x5kg/cm flange or screw Approx..3kg(1M) Approx..3kg(1M) Approx..3kg(1M) Pressure 4

6 STANDARD TYPE 1/"NPT PEEK 100 M5 PTFE Probe Material Material Tensile Strength Voltage Output Current 8 Suitable for conductive/ corrosive material and middle-size tank.(weight can not be fixed at the bottom of tank) EB531 Anti-Corrosion Hi-Temp Wire Probe +Coating +PTFE -40~100 C -40~00 C 000Kgf 1~36Vdc 4 ~0mA( two wire) 1%FS (5 C) Pressure 1"x5kg/cm flange or screw Approx..3kg(1M) 5

7 STANDARD TYPE (MULTI-FUNCTION) /"PF 105 1/"PF 105 1/"PF PP PP 100 M EB PVDF Coating EB PP Coating EB FEP Coating Suitable for non-conductive material and middle-size tank. Suitable for non-conductive material and big tank. Suitable for conductive/ corrosive material and middle-size tank. EB300 Rod Probe EB3300 Wire Probe EB3400/0/30 Anti-Corrosion Probe material /316 +Coating material Tensile strength voltage 1~36Vdc Output current 4 ~0mA( two wire) Output Linear Upper Limit -40~100 C 3.8~1.5mA ma -40~100 C 000Kgf 1~36Vdc 4 ~0mA( two wire) 3.8~1.5mA ma -40~100 C 1~36Vdc 4 ~0mA(two wire) 3.8~1.5mA ma Lower Limit 3.5mA 3.5mA 3.5mA Output Latch 3.5 ma 3.5 ma 1%FS (5 C) 1%FS (5 C) 1"x5kg/cm flange or screw1"x5kg/cm flange or screw 3.5 ma 1%FS (5 C) 1"x5kg/cm flange pressure Approx..3kg(1M) Approx..3kg(1M) Approx..3kg(1M) 6

8 STANDARD TYPE (MULTI-FUNCTION) / COMPACT RAMP Probe material material Tensile strength voltage Output current Output Linear Upper Limit Lower Limit Output Latch pressure PP EB PP Coating EB FEP Coating Suitable for conductive/ corrosive material and middle-size tank. EB350/30 Anti-Corrosion Wire Probe +Coating +PTFE 000Kgf 1~36Vdc 4 ~0mA( two wire) ma 3.5mA Approx..3kg(1M) 15kg/cm M8 1/"PF PTFE -40~100 C 3.8~1.5mA 3.5 ma 1%FS (5 C) 1"x5kg/cm flange or screw ( :mm) Power supply range Output current Output Linear Upper Limit Lower Limit Output Latch Load Resistance Environment Environment Humidity Coefficient LCD Display L=1M(Max.) 8 Suitable for conductive/ corrosive material and small tank. EB600 Compact Ramp 1~36Vdc 0~1000pF 4~0mA( two wire) 3.8~1.5mA ma 3.5mA 3.5 ma 1%FS (5 C) (Vs- 1) x 50 Vs:Power Voltage -40 C~80 C -40 C~100 C 0~85% 0.0% FS. / C ~ 9999 IP 65 M1 HEX38 1/"PT 7

9 CALIBRATION & SETUP Setting mode Display Value sec Alarm mode Control mode System mode A: K: U: B: L: V: C: M: W: D: N: X: E: O: Y: F: P: Z: G: Q: H: R: I: S: J: T: Main Menu Sub- Menu Default Description EB3 Series EB Series EB600 Series 0~3-1999~ ~ ~ ~ ~ ~9999 0~ ~ ~9999 0~99 / / SAVE,RSET BACK SAVE,RSET BACK Lo,MID,HI ON, OFF 1~60sec 0~ SAVE SAVE LO OFF 1 0~ ~ ~ ~ Decimal point setting 0mA corresponding display value 4mA corresponding display value Corresponding calibration value for high point (Hipt). Corresponding Calibration Value for low point (Lopt). Process High Alarm Alarm position Hysteresis Alarm Alarm delay time(sec) Alarm direction :normal open :normal close Process Low Alarm Alarm position Hysteresis Alarm Alarm delay time(sec) Alarm direction :normal open :normal close Memory for max & mini value during operation. SAVE:Save value into Eeprom REST:Clean present value and memory BACK:Go back to sub-menu Software Filter Output latch Reflash time Capacity Value High point Capacity Value Low point Capacity Value 4mA fine turn 0mA fine turn Load default 8

10 ORDER INFORMATION EB H M : Multi-function Type : StandardType Rod Type Wire Probe Type Anti-Corrosion (3400: PVDF 340: PP 3430: FEP) Anti-Corrosion with Wire-probe weight (350: PP 3530: FEP) Wire Probe Type Hi-Temp Wire Probe Type --- Rod Type --- Hi-Temp Rod Probe Type Wire Probe Type Hi-Temp Wire ProbeType Anti-Corrosion (400: PVDF 40: PP 430: FEP) Anti-Corrosion with Wire-probe weight (50: PP 530: FEP) Compact Ramp Material Metal Probe: Plastic Coated Probe: Resistance 0: Standard (max.100 C) 1: Hi-Temp Type (max.00 C) Connecting Dimension B --- 1/" (EB600) C --- 3/4" (EB600) D --- 1" E /" F --- " G /" H --- 3" I --- 4" J --- 5" K --- 6" S --- others Probe Length (unit: mm) 0500: below 500mm 0: SUS316 6: 0:PVDF :PP 3:FEP Specification M --- 5kg/cm N kg/cm O Lbs P Lbs Q --- PT R --- PF(G) T --- BSP U --- NPT V --- GAS S --- others * Tolerance of the total product length is 5mm * Characteristics, specifications and dimensions are subject to change without notice. * Please contact your nearest distributing office for further informations. 1000: 501~1000mm 1500: 1001~1500mm 500mm per Unit Use English letter as first code for probe length over 10m. A150 represents 15m, A00 represents 0m 9

11 EXPLOSION PROOF TYPE PTB PROOF No.09 ATEX 1004 II G Ex d IIB T3 II D Ex td A1 IP6x T80 C or T95 C or T130 C or T195 C 15 1/"NPT 1/"NPT 1/"NPT ceramic 1-1/"PT 3" 5kg/cm ceramic /"PT 3" 5kg/cm /"PT 1-1/" 5kg/cm Suitable for non-conductive material and big tank. Suitable for non-conductive material and big tank. Suitable for non-conductive material and middle-size tank. EB1710 Wire Probe EB1711 Hi-Temp Wire Probe EB170 Rod Probe Probe material /316 material CERAMIC CERAMIC -0~70 C -0~70 C -0~70 C -40~00 C Tensile strength 000Kgf 000Kgf voltage 1~36Vdc 1~36Vdc 1~36Vdc Output current 4 ~0mA( two wire) 4 ~0mA( two wire) 4 ~0mA( two wire) 1%FS (5 C) 1%FS (5 C) 1%FS (5 C) 3"x5kg/cm flange or 1-1/"PT screw 3"x5kg/cm flange or 1-1/"PT screw 1-1/"x5kg/cm flange or 1-1/"PT screw Approx. 3.7kg(1M) Approx. 4.kg(1M) Approx..3kg(1M) pressure 10

12 EXPLOSION PROOF TYPE PTB PROOF No.09 ATEX 1004 II G Ex d IIB T3 II D Ex td A1 IP6x T80 C or T95 C or T130 C or T195 C 1/"NPT 1/"NPT 1/"NPT /"PT 1-1/" 5kg/cm /"PT 9.5 wire " 5kg/cm /"PT 9.5 wire " 5kg/cm Suitable for non-conductive material and middle-size tank. Suitable for non-conductive material and big tank. Suitable for non-conductive material and big tank. EB171 Hi-Temp Rod Probe EB1730 Wire Probe EB1731 Hi-Temp Wire Probe Probe material /316 material -0~70 C -0~70 C -0~70 C -40~00 C -40~00 C Tensile strength 000Kgf 000Kgf voltage 1~36Vdc 1~36Vdc 1~36Vdc Output current 4 ~0mA( two wire) 4 ~0mA( two wire) 4 ~0mA( two wire) 1%FS (5 C) 1%FS (5 C) 1%FS (5 C) 1-1/"x5kg/cm flange or 1-1/"PT screw "x5kg/cm flange or 1-1/"PT screw "x5kg/cm flange or 1-1/"PT screw Approx..8kg(1M) Approx..3kg(1M) Approx..8kg(1M) pressure 11

13 EXPLOSION PROOF TYPE PTB PROOF No.09 ATEX 1004 II G Ex d IIB T3 II D Ex td A1 IP6x T80 C or T95 C or T130 C or T195 C 1/"NPT 15 1/"NPT 5 1-1/"PT 1-1/" 5kg/cm /"PT wire " 5kg/cm PTFE 150 EB PVDF Coating EB PP Coating EB FEP Coating Suitable for conductive/ corrosive material and middle-size tank. EB1740/4/43 Anti-Corrosion 38 EB PP Coating EB FEP Coating Suitable for conductive/ corrosive material and big tank.(weight can not be fixed at the bottom of tank) EB175/53 Anti-Corrosion Wire Probe Probe material +Coating +Coating material Tensile strength voltage Output current pressure -0~70 C 1~36Vdc 4 ~0mA( two wire) 1%FS (5 C) 1-1/"x5kg/cm flange or 1-1/"PT screw Approx..3kg(1M) +PTFE -0~70 C 000Kgf 1~36Vdc 4 ~0mA( two wire) 1%FS (5 C) "x5kg/cm flange or 1-1/"PT screw Approx..3kg(1M) 1

14 ORDER INFORMATION EB H M Wire Probe Type Hi-Temp Wire Probe Type Rod Type Hi-Temp Rod Probe Type Wire Probe Type Hi-Temp Wire ProbeType Anti-Corrosion (1740: PVDF 174: PP 1743: FEP) Anti-Corrosion with Wire-probe weight (175: PP 1753: FEP) Connecting Dimension D --- 1" E /" F --- " G /" H --- 3" I --- 4" J --- 5" K --- 6" S --- others Specification M --- 5kg/cm N kg/cm O Lbs P Lbs Q --- PT R --- PF(G) T --- BSP U --- NPT V --- GAS S --- others Probe Length (unit: mm) 0500: below 500mm 1000: 501~1000mm 1500: 1001~1500mm 500mm per Unit Use English letter as first code for probe length over 10m. A150 represents 15m, A00 represents 0m * Tolerance of the total product length is 5mm * Characteristics, specifications and dimensions are subject to change without notice. * Please contact your nearest distributing office for further informations. 13

15 INSTALLATION 1. The rod probe or cable probe (depending upon which one you purchased ) should be parallel to the tank wall and be positioned as close as possible to the tank wall. Make sure the medium does not stick in between the probe and the tank wall.. If the tank is not electrically conductive, a metal strap should be added outside of tank wall (fig. 1) for either liquid or non-liquid medium. Or place a metal tube, usually made out of stainless steel, around the rod (fig. ) for liquid medium. This metal tube should come with a vent hole at top of the tube to allow the medium to go up inside of the tube. 3. If the container is irregular-shaped, such as a cylindrical, and the medium is liquid with low viscosity, the rod should be placed inside a metal tube with vent hole at the top. (Fig. ) 4. For non-conductive medium of powder or granuules in a new or empty tank, the cable probe should be fixed to the bottom of tank with ceramic isolator (EB100 Series. If the tank is not empty, please use the EB300 Series. (fig. 3) 5. Make sure to fix the rod probe or cable probe to the container wall with non-conductive supporting material. If an agitator is in place (see fig. 4). This will prevent the deformation of the rod probe and tangling of the cable probe around the agitator. 6. If the medium is conductive, make sure to coat the rod probe or cable probe with PVDF or PP material. 7. During the installation, the process connection should be grounded. An installation without proper grounding will not guarantee normal operation of the device later on. 8. When all electrical connections inside of a Capacitance Level Transducer housing are finished, the housing cover and the conduit opening should be sealed and tightened to prevent moisture from soaking in. Tube Fig. 1 Fig. Metal strap Rod probe Vent hole Rod probe Cable probe Isolate supporter Agitator Rod probe Ceramic isolator Fig. 3 Fig. 4 14

16 [FC/FD] [FG] Mini Float/Magnetic Float Level Switch Magnetic Float Level Transmitter [EA] [LR] [PB] [FF] [FA/FB] [SP] [SF] Side Mounting Float Switch Cable Float Level Switch Thermal Dispersion Flow Switch Paddle Flow Switch [EF] [EB] [EG] [FA/FB] [EB] [EC] [FG] [JFR] [FC/FD] [SB] [SC] [SD] Optical Level Switch [SA] [SE] [SA] Rotary Paddle Level Switch Capacitance Level Switch [FF] [EC] Pressure Level Transmitter [SF] [LR] Loop Power Indicator [SC] [SC] Vibrating Probe Level Switch Tuning Fork Level Switch [SD] [FC/FD] [SP] [EB] RF-Capacitance Level Transmitter [SB] [EG] [EF] [MEF] [EA] [JFR] RF-Capacitance / Admittance Level Switch Magnetostrictive Level Transmitter By-Pass Level Transmitter Mini By-Pass Level Transmitter Ultrasonic Level Transmitter FMCW Radar Level Transmitter [SC] [EB] [SB] [EE] [SE] [EA] [SC] [PB/PM] [JFR] [EB] [SA] [EE] Electromechanical Level System [ED] Speed Monitor [SRT/SRS] Conveyer Belt Misalignment Switch & [SE] [SB] EXAMPLES [SC] Safety Cable Pull Switch [PB/PM] Microprocessor Based Bargraphic Display Scaling Meter [BRD/AE] Valve and Controller for Dust Collector System [BAS/BAH/BVP] Air Hammer [BVK/BVR/BVT] Pneumatic Vibrator [BAS/ BAH/BVP] [BVK/ BVR/BVT] Distributor: 08-EB-B0-EP, 05/15/011