Autocoat BT LV 250 Topcoat IC RM. Autocoat BT LV 250 Topcoat IC RM Autocoat BT LV 250 Hardener Medium

Transcription

1 Description: High gloss, 2K High Solids polyurethane topcoat. The target use for this product is refinishing and refurbish of existing vehicles and the painting of newly build commercial vehicles and trailers. The EU VOC limit for this product (product category: IIB.D) in ready to use form is max 420 g/litre. The VOC content of this product in ready to use form is max 420 g/litre sec HVLP Suction feed 2* mm max. 0.7 bar Product and Additives: Autocoat BT LV 250 Topcoat MM/RM Autocoat BT Autocoat BT LV 250 Hardener Medium Autocoat BT LV 250 TC Plural Hardener Autocoat BT LV 250 Accelerated Reducer Autocoat BT LV 250 Reducer Fast Autocoat BT LV 250 Reducer Medium Autocoat BT LV 250 Reducer Slow Autocoat BT LV 250 IC Reducer Autocoat BT LV 250 Air Dry Additive Autocoat BT 800 Matting Paste mins. 30 mins. 60 C. 6-8 hours 20 C Basic Raw Materials: Autocoat BT LV 250 Topcoat MM/RM Autocoat BT LV 250 Topcoat IC RM Autocoat BT LV 250 Hardener Medium Autocoat BT LV 250 Reducer Fast/Medium/Slow Autocoat BT LV 250 Accelerated Reducer Autocoat BT LV 250 IC Reducer : acrylic resins : acrylic resins : poly-isocyanate resins : solvents : solvents containing catalyst : solvents containing catalyst Suitable Substrates for both LV 250 Topcoat & LV 250 Topcoat IC RM: Existing finishes included finishes with a thermoplastic behavior. Polyester laminates and GRP (plywood). Autocoat BT LV 250 Chassis Primer 1K Autocoat BT 800 Washprimer AS ) Autocoat BT 800 Washprimer Beige Autocoat BT LV 850 Washprimer CF Autocoat BT LV 350 Filler Beige/Light Gray / Dark Gray Autocoat BT LV 350 Filler Varicolor Autocoat BT LV 250 Primer EP Beige/ Gray Autocoat BT LV 350 Primer EP Light Yellow Autocoat BT LV 351 Primer EP Black Additional suitable substrates for LV 250 Topcoat MM/RM Autocoat BT LV 850 Sealer Note: 1. LV 250 Topcoat MM/RM and IC RM can applied directly on Autocoat BT 800 Washprimer AS , when applied on aluminum and stainless steel substrates. Surface Preparation: Degrease with Autocoat BT LV 350 Antistatic Silicone Remover Wet sand with 1/5

2 P800-P1000 grit or dry sand with P400-P500 grit (3M Gold). Mixing Ratio by Volume: A : Standard mixing ratio: 100 parts of LV 250 Topcoat MM/RM 25 parts of LV 250 Reducer Fast / Medium/ Slow B: Accelerated mixing ratio: 100 parts of LV 250 Topcoat MM/RM 25 parts of LV 250 Accelerated Reducer C: Air Dry mixing ratio: 100 parts of LV 250 Topcoat MM/RM / Topcoat IC RM 5 parts of LV 250 Air Dry Additive 25 parts of LV 250 Reducers D: Airless / Air assisted airless / ES mixing ratio 100 parts of LV 250 Topcoat IC RM 25 parts of LV 250 IC Reducer E: Plural Equipment 2 parts of Autocoat BT LV 250 Topcoat MM/RM part of Autocoat BT LV 250 TC Plural Hardener Spraying Viscosity: A + B+D +E: s DIN Cup 4 at 20 C. C s DIN Cup 4 at 20 C Potlife: A. Normal Mixture: 1-1½ hours at 20 C B. Accelerated Mixture: min at 20 C C. Air Dry mixture: 30 min at 20 C D: Airless/Air Assisted/ ES mixture 2 hours at 20 C E: Plural Equipment 1-1½ hours at 20 C Spray gun fluid tip and working pressure: Spray Gun: Fluid Tip: Working Pressure: Gravity feed: mm 3-5 bar Suction feed: mm 3-5 bar HVLP Gravity feed: mm max. 0.7 bar HVLP Suction feed: mm max. 0.7 bar Pressure feed : mm 3-5 bar (atomization pressure) ± 1bar material pressure material flow 300 cc/min Airless: 4.09 (0.009 /40 ) bar 6.09 (0.009 /60 ) bar Airmix: bar 2/5

3 Application Process: Conventional or HVLP application: Apply a closed coat, followed by a full coat. Flash-off time 5-10 minutes at 20 C between coats. Airless / Airmix/ ES application: Apply a grip coat followed directly by one single coat. Note: Autocoat BT LV 250 Topcoat can also be applied with roller or supple brush. Film Thickness: A + B+ C+ E : µm dry D : µm dry Cover rate: Theoretically m²/l ready for use mixture at 50µm dry. Note: The practical cover rate depends on many factors i.e. shape of the object, roughness of the surface, application method and application circumstances. Cleaning of Equipment: Use Sikkens Solvent, a nitrocellulose thinner. Drying times of the standard mixture ratio : 20 C 40 C 60 C Dust dry : 1½ hours Dry to handle : 6-8 hours 1-1½ hours 30 min. Drying times of the accelerated mixture ratio: 20 C 40 C 60 C Dust dry : ¾-1 hours Dry to handle : 2½ hours min. 15 min. Drying times of the Air Dry mixture : 20 C 40 C 60 C Dust dry : min 10 min 5 min Dry to handle : 1 hour 20 min. 10 min. Design: 2 hours 15 min LV 250 Topcoat MM/RM is recoatable with: Autocoat BT LV 250 Topcoat MM/RM (normal and accelerated mixing ratio) Autocoat BT LV 850 Clear (only wet-in-wet) Autocoat BT LV 851 Clear (only wet-in-wet) Autocoat BT LV 853 Clear 3/5

4 Notes: 1. A second LV 250 Topcoat MM/RM color, normal or accelerated mixing ratio, can be applied on the first LV 250 Topcoat color after overnight drying. To reduce masking times, use the Air Dry mixture with the LV 250 Accelerated Reducer, force dry at 60 C for 15 mins (object temperature). Recoat after cooling down, but within 24 hrs without abrading. 2. When these drying times are exceeded, abrade LV 250 Topcoat with Scotch Brite Type S Ultra Fine (Grey) or apply a 1-coat of Autocoat BT LV 850 Sealer in case of the second LV 250 Topcoat color. 3. LV 250 Topcoat MM/RM can be recoated only wet-on-wet with LV 850 Clear within 45 minutes and 2 hours at 20 C. LV 250 Topcoat MM/RM can be recoated only wet-on-wet with LV 851 Clear after 30 min - 1 hour at 20 C. LV 250 Topcoat MM/RM can be recoated wet-on-wet with LV 853 Clear after 45 min up to 24 hours at 20 C OR after 25 min up to 24 hrs after 30 min / 60 C bake. When these time periods are exceeded, abrade LV 250 Topcoat MM/RM with Scotch Brite Type S Ultra Fine (Grey). Matted colors For matted color using 800 Matting Paste 475 we refer to the TIS Packaging: Autocoat BT LV 250 Topcoat MM toners: 3.75 ltr can Autocoat BT LV 250 B205 Binder: 3.75 ltr can, 20 ltr in a 23 ltr pale, 200 ltr drum Autocoat BT LV 250 Hardener Medium: 5 ltr and 60 ltr Autocoat BT LV 250 TC Plural Hardener : 23 ltr in 27 ltr Autocoat BT LV 250 Reducer(s): 5 ltr (Reducer Medium also in 25 ltr) Autocoat BT LV 250 Air Dry Additive: 1 ltr plastic pot GI Binder: 3.75 ltr can, 23 ltr pale, 1000 ltr container Shelflife: Autocoat BT LV 250 Topcoat MM/RM : 2 years Autocoat BT LV 250 Hardener Medium : 2 years Autocoat BT LV 250 TC Plural Hardener : 1 year Autocoat BT LV 250 Reducer Fast : 2 years Autocoat BT LV 250 Reducer Medium : 2 years Autocoat BT LV 250 Reducer Slow : 2years Autocoat BT LV 250 Accelerated Reducer : 2 years Autocoat BT LV 250 Air Dry Additive : 2 years HEALTH & SAFETY DATA regarding Autocoat BT LV 250 Topcoat RM and additives: For professional use only. (See Material Safety Data Sheet). See text on the label of this product. The user of this product is required to comply with the national statutory regulations for health and safety at work and waste disposal. 4/5

5 AkzoNobel Coatings LTD, Car Refinishes Address: 136 Milton Park, Abingdon Oxfordshire OX14 4SB AkzoNobel CR Ireland Address: Avonbeg Industrial Estate Long Mile Road, Dublin 12 Tel: (0) Tel: (0) IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws: any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation. Always read the Material Data Sheet and the Technical Data Sheet for this product if available. All advice we give or any statement made about the product by us (whether in this data sheet or otherwise) is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing otherwise, we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product. All products supplied and technical advices given are subject to our standard terms and conditions of sale. You should request a copy of this document and review it carefully. The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development. It is the user's responsibility to verify that this data sheet is current prior to using the product. Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel. Head Office Akzo Nobel Car Refinishes B.V., PO Box BA Sassenheim, The Netherlands. 5/5