Solenoid valve 2/2 way N.O. With pilot control

Transcription

1 Solenoid valve 2/2 way N.O. With pilot control 21W3Z190 21W7Z500 PRESENTTION: S.V. with pilot control for interception of fluids compatible with the construction materials. minimum operational pressure of 0,2 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: utomation Heating PIPES: G3/4-G2 COILS: 8W-Ø13 D-DS-S155 C (classf) DF-DV 180 C (classh) MOULDING ND OIN RE MDE Y 100% VIRGIN MTERIL. Max. allowable pressure(ps) G 3/4-G1 G11/4-G2 mbient temperature: withcoilclassf withcoilclassh 25bar 16bar -10 C+60 C -10 C+80 C Gaskets Temperature Medium =NR(nitrile rubber) - 10 C + 90 C ir, inert gas, water E=EPDM (ethylene-propylene) G 3/4-10 C +140 C Water, low pressure steam V=FKM(fluoroelastomer) -10 C +140 C Mineraloils(2 E),gasoline gas oil For seals other than NR replace the letter with the ones corresponding to the other seals. E.I. 21W5ZE350. Code 21W3Z190 Max viscosity cst E G 1 21W4Z G 1 1/4 21W5Z ~ G 1 1/2 21W6Z G 2 21W7Z Ø Kv Power 8 0,2 Pressure min M.O.P.D. l/mn (watt) bar Cbar DCbar CE pproval (Pressure Equipment Directive 97/23/CE) for EV 21W5 21W7 The ODE reserves the right to carry out technical and aesthetic modifications without prior notification ODE 21W3Z190 21W7Z500

2 DIMENSIONS: MTERILS: ody rass- UNI EN CW617N rmature tube Stainless steel ISI series 300 Fixed core Stainless steel ISI series 400 Plunger Stainless steel ISI series 400 Phase displacement ring Copper- Cu 99,9% Spring Stainless steel ISI series 300 Seal Standard: =NR On request: E=EPDM V=FKM Orifice rass- UNI EN CW617N On request: Connector Pg9orPg11 Connector conformity ISO 4400 FETURES: Electrical conformity IEC 335 Protection degree IP 65 EN 60529(DIN 40050) with coil fitted by connector. SPRE PRTS: 1. Coil: See coils list 2. Complete diaphragm support: Code R450788/ 3. Complete armature tube without gasket: Code R Gasket O-Ring: Code R990000/ 5. Gasket O-Ring: G3/4-G1 CodeR990002/ G11/4-G11/2CodeR990005/ G 2 Code R990081/ 6. Complete diaphragm: G3/4-G1 CodeR450431/ G11/4-G11/2CodeR450466/ G 2 Code R450432/ KIT: KT130Z30-F=2+3+4 MINTENNCE KIT: G3/4-G1 KTG0W3Z19=2+5+6 G11/4-G11/2 KTG0W5Z35=2+5+6 G2 KTG0W7Z50=2+5+6 Type 21W3Z190 G 3/ W4Z250 G W5Z350 G11/4 21W6Z400 G11/2 C W7Z500 G COIL TYPE POWER SORPTION DIMENSIONS W Hold V~ Inrush V~ D E F 8 14, W3Z190 21W7Z500 ODE

3 Solenoid valve 2/2 way N.C. With pilot control 21W3K190 21W7K500 PRESENTTION: S.V. with pilot control for interception of fluids compatible with the construction materials. minimum operational pressure of 0,2 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: utomation Heating PIPES: G 3/4 - G 2 COILS: 8W - Ø 13 D - DS - S 155 C (class F) DP 160 C (high mperature) DF - DV 180 C (class H) MOULDING ND OIN RE MDE Y 100% VIRGIN MTERIL. Max. allowable pressure (PS) G 3/4 - G 1 25 bar G 1 1/4 - G 2 16 bar Environment temperature: with coil class F or high temperature - 10 C + 60 C with coil class H - 10 C + 80 C G 3/4 Gaskets Temperature Medium =NR (nitrile rubber) - 10 C + 90 C ir, inert gas, water E=EPDM (ethylene-propylene) V=FKM (fluoroelastomer) - 10 C +140 C - 10 C +140 C Water, low pressure steam 21W3K190 Mineral oils (2 E), gasoline gas oil For seals other than NR replace the letter with the ones corresponding to the other seals. E.I. 21W3KE190. Code G 1 21W4K G 1 1/4 21W5K ~ G 1 1/2 21W6K G 2 21W7K Max viscosity Ø Pressure Kv Power min M.O.P.D. cst E l/mn (watt) bar C bar DC bar 8 0, CE pproval (Pressure Equipment Directive 97/23/CE) for EV 21W5 21W7 The ODE reserves the right to carry out technical and aesthetic modifications without prior ODE 21W3K190 21W7K500

4 DIMENSIONS: MTERILS: ody rass - UNI EN CW617N rmature tube Stainless steel ISI series 300 Fixed core Stainless steel ISI series 400 Plunger Stainless steel ISI series 400 Phase displacement ring Copper - Cu 99,9% Spring Stainless steel ISI series 300 Seal Standard: =NR On request: E=EPDM V=FKM Orifice rass - UNI EN CW617N On request: Connector Pg 9 or Pg 11 Connector conformity ISO 4400 FETURES: Electrical conformity IEC 335 Protection degree IP 65 EN (DIN 40050) with coil fitted by connector. SPRE PRTS: 1. Coil: See coils list 2. Complete plunger: Code R450886/ 3. Complete armature tube: Code R Gasket O-Ring: G 3/4-G 1 Code R990002/ G 1 1/4-G 1 1/2 Code R990005/ G 2 Code R990081/ 5. Complete diaphragm: G 3/4-G 1 Code R450431/ G 1 1/4-G 1 1/2 Code R450466/ G 2 Code R450432/ KIT: KT130K30-=2+3 MINTENNCE KIT: G 3/4-G 1 KTG0W3K19=2+4+5 G 1 1/4-G 1 1/2 KTG0W5K35=2+4+5 G 2 KTG0W7K50=2+4+5 Type C 21W3K190 G 3/ W4K250 G W5K350 G 1 1/ W6K400 G 1 1/4 21W7K500 G COIL W POWER SORPTION DIMENSIONS Inrush Hold TYPE D E F V ~ V ~ 8 W 25 14, W3K190 21W7K500 ODE

5 Solenoid valve 2/2 way N.C. With pilot control- Progressive closing 21W3K190-PC 21W4K250-PC PRESENTTION: S.V. with pilot control for interception of fluids compatible with the construction materials. minimum operational pressure of 0,2 bar is required. The materials used and the tests undertaken ensure maximum reliability and duration. USE: utomation Heating PIPES: G3/4-G1 COILS: 8W-Ø13 D-DS-S155 C (classf) DF-DV 180 C (classh) MOULDING ND OIN RE MDE Y 100% VIRGIN MTERIL. Max. allowable pressure(ps) 25 bar mbient temperature: withcoilclassf -10 C+60 C withcoilclassh -10 C+80 C Gaskets Temperature Medium =NR(nitrile rubber) - 10 C + 90 C ir, inert gas, water V=FKM(fluoroelastomer) -10 C +140 C Mineraloils(2 E),gasoline gas oil For seals other than NR replace the letter with the ones corresponding to the other seals. E.I. 21W3KV190-PC. Max viscosity Ø Pressure Kv Power Code min M.O.P.D. cst E l/mn (watt) bar Cbar DCbar G 3/4 21W3K190-PC ~2 8 0, G 1 21W4K250-PC The ODE reserves the right to carry out technical and aesthetic modifications without prior notification ODE 21W3K190-PC 21W4K250-PC

6 DIMENSIONS: MTERILS: ody rass- UNI EN CW617N rmature tube Stainless steel ISI series 300 Fixed core Stainless steel ISI series 400 Plunger Stainless steel ISI series 400 Phase displacement ring Copper- Cu 99,9% Spring Stainless steel ISI series 300 Seal Standard: =NR On request: V=FKM Orifice rass- UNI EN CW617 On request: Connector Pg9orPg11 Connector conformity ISO 4400 FETURES: Electrical conformity IEC 335 Protection degree IP 65 EN 60529(DIN 40050) with coil fitted by connector SPRE PRTS: 1. Coil: See coils list 2. Complete plunger: Code R450886/ 3. Complete armature tube: Code R Gasket O-Ring Code R990002/ 5. Complete diaphragm: Code R451157/ 5a. Diaphragm-supporting Ring: Code R KIT: KT130K30-=2+3 MINTENNCE KIT: KTG0W3K19-PC=2+4+5 Type C COIL TYPE POWER SORPTION DIMENSIONS W Hold V~ Inrush V~ 21W3K190-PC G 3/ W4K250-PC G , D E F 21W3K190-PC 21W4K250-PC ODE

7 Solenoid valve 2/2 way N.C. With pilot control- manual operation and closing velocity control 21W3K190-MR 21W7K500-MR PRESENTTION: S.V. with pilot control for interception of fluids compatible with the construction materials. minimum operational pressure of 0,2 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: utomation Heating PIPES: G3/4-G2 COILS: 8W-Ø13 D-DS-S155 C (classf) DF-DV 180 C (classh) MOULDING ND OIN RE MDE Y 100% VIRGIN MTERIL. Max. allowable pressure(ps) G 3/4-G1 G11/4-G2 mbient temperature: withcoilclassf withcoilclassh 25bar 16bar -10 C+60 C -10 C+80 C Gaskets Temperature Medium =NR(nitrile rubber) - 10 C + 90 C ir, inert gas, water E=EPDM (ethylene-propylene) G 3/4 21W3K190-MR - 10 C +140 C Water, low pressure steam V=FKM(fluoroelastomer) -10 C +140 C Mineraloils(2 E),gasoline gas oil For seals other than NR replace the letter with the ones corresponding to the other seals. E.I. 21W3E190-MR. Code Max viscosity cst E G 1 21W4K250-MR G 1 1/4 21W5K350-MR 12 ~ G 1 1/2 21W6K400-MR G 2 21W7K500-MR Ø Kv Power 8 0,2 Pressure min M.O.P.D. l/mn (watt) bar Cbar DCbar CE pproval (Pressure Equipment Directive 97/23/CE) for EV 21W5 21W7 Note vailable on request and with minimum quantities. The ODE reserves the right to carry out technical and aesthetic modifications without prior notifica ODE 21W3K190-MR 21W7K500-MR

8 DIMENSIONS: MTERILS: ody rass- UNI EN CW617N rmature tube Stainless steel ISI series 300 Fixed core Stainless steel ISI series 400 Plunger Stainless steel ISI series 400 Phase displacement ring Copper- Cu 99,9% Spring Stainless steel ISI series 300 Seal Standard: =NR On request: E=EPDM V=FKM Orifice rass- UNI EN CW617N On request: Connector Pg9orPg11 Connector conformity ISO 4400 FETURES: Electrical conformity IEC 335 Protection degree IP 65 EN 60529(DIN 40050) with coil fitted by connector. SPRE PRTS: 1. Coil: See coils list 2. Complete plunger: Code R450886/ 3. Complete armature tube: Code R Gasket O-Ring Code R990000/ 5. Manual operation: Code R451772/ 6. Gasket O-Ring: G 3/4-G 1 Code R990002/ G11/4-G11/2CodeR990005/ G 2 Code R990081/ 7. Complete diaphragm: G3/4-G1 CodeR450431/ G11/4-G11/2CodeR450466/ G 2 Code R450432/ 8. Regulation screw: Code R450728/ KIT: KT130K30-F= MINTENNCE KIT KTG0W3K19= KTG0W5K35= KTG0W7K50= Type 21W3K190-MR G 3/ W4K250-MR G W5K350-MR G 1 1/4 21W6K400-MR G 1 1/2 C W7K500-MR G COIL TYPE POWER SORPTION DIMENSIONS W Hold V~ Inrush V~ D E F 8 14, W3K190-MR 21W7K500-MR ODE

9 Solenoid valve 2/2 way N.C. With pilot control- Latching coils 21W3K190 21W7K500 Latching coils PRESENTTION: S.V. with pilot control for interception of fluids compatible with the construction materials. Opening is obtained by a 50 msec pulse, and closing by another 50 msec pulse, with reversed polarity. minimum operational pressure of 0,2 bar is required. The materials used and the tests carried out ensure maximum reliability and duration. USE: utomation Heating PIPES: G3/4-G2 COILS: D2X006LS 155 C(class F) D2X009LS 155 C(class F) D2X012LS 155 C(class F) D05009LS 155 C(class F) D05012LS 155 C(class F) D05024LS 155 C(class F) MOULDING ND OIN RE MDE Y 100% VIRGIN MTERIL.%. Max. allowable pressure(ps) G3/4-G1 25bar G11/4-G2 16bar Environment temperature: - 10 C + 60 C Gaskets Temperature Medium Special item-not standard =NR(nitrile rubber) - 10 C +90 C ir, inert gas, water E=EPDM (ethylene-propylene) - 10 C +140 C Water, low pressure steam V=FKM(fluoroelastomer) -10 C+140 C Mineraloils(2 E),gasoline gas oil ForsealsotherthanNRreplacetheletter withtheones corresponding to the other seals. E.I. 21W3KV190. G3/4 and G 1 G11/4 and G11/2 and G 2 Code Coils code 21W3K190 and 21W4K250 21W5K350 e 21W6K400 and 21W7K500 Voltages VDC D2X006LS 6 D2X009LS 9 D2X012LS 12 D05009LS 9 D05012LS 12 D05024LS 24 D2X006LS 6 D2X009LS 9 D2X012LS 12 D05009LS 9 D05012LS 12 D05024LS 24 Max viscosity Ø Kv Power cst E Pressure min M.O.P.D. l/mn (watt) bar DC bar 12 ~ , ~ , ~2 2, ~ Note vailable on request and with minimum quantities. CE pproval (Pressure Equipment Directive 97/23/CE) for S.V. 21W5 21W7 The ODE reserves the right to carry out technical and aesthetic modifications without prior notification (Internal technical data sheet) ODE 21W3K190 21W7K500 Latching coils

10 MTERILS: ody rass- UNI EN CW617N rmature tube Stainless steel ISI series 300 Fixed core Stainless steel ISI series 400 Plunger Stainless steel ISI series 400 Phase displacement ring Copper- Cu 99,9% Spring Stainless steel ISI series 300 Shutter Standard: =NR On request: E=EPDM V=FKM Orifice rass- UNI EN CW617N On request: Connector Pg9orPg11 Connector conformity ISO 4400 FETURES: Electrical conformity IEC 335 Protection degree IP 65 EN 60529(DIN 40050) with coil fitted by connector. SPRE PRTS: 1. Coil: D2X006LS D2X009LS D2X012LS D05009LS D05012LS D05024LS 2. Complete plunger: Code R450886/ 3. Complete armature tube: Code R Gasket O-Ring: G3/4-G1 CodeR990002/ G11/4-G11/2CodeR990005/ G 2 Cod. R990081/ 5. Complete diaphragm: G 3/4-G 1 Code R450431/ KIT: G11/4-G11/2CodeR450466/ G 2 Code R450432/ KT130K30-=2+3 MINTENNCE KIT: KTG0W3K19=2+4+5 DIMENSIONS: + - Open - + Close Type C 21W3K190 G 3/ W4K250 G W5K350 G11/ W6K400 G11/2 21W7K500 G D E F W3K190 21W7K500 Latching coils (Internal technical data sheet) ODE