Mounting Brackets [Refer to Dimensions on page 6.]

Transcription

1 Mounting Brackets E-L Slits/Reflectors E-S/E-R CSM_E-L/E-S/E-R_DS_E Mounting Brackets [Refer to Dimensions on page.] Model Fitting materials Count E-L Iron, zinc plating E-L0 Iron, zinc plating E-L Iron, zinc plating E-L E-L E-L Iron, black coating E-L Iron, zinc plating Accessories Applicable sensor Page Description Material Count (mounting pitch on sensor side) Dimensions Slotted/Phillips screws, M (with spring washers) Iron, zinc plating EC-S0 () Phillips screws M Iron, zinc plating Nuts M Iron, zinc plating Phillips screws M (with spring washers) Iron, zinc plating Plain washer M Iron, zinc plating Phillips screws M 0 Iron, zinc plating (with spring washers) Plain washer M Iron, zinc plating Slotted/Phillips screws M Slotted/Phillips screws M Slotted/Phillips screws M 0 Iron, zinc plating Nuts M Iron, nickel plating EJK EC- (0) EC- (0) EC-DS0 () EC-VSG () EC-VSR () EZ pre-wired model (.) EZ pre-wired model (.) EJM (0) E-L Iron, zinc plating EJM (0) E-LV E-TV E-L E-L E-L E-L Hexagonal bolts M Hexagonal bolts M Hexagonal bolts M Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. E-TS E-A0 Iron, zinc plating ES-C (.) Iron, zinc plating ES-C (.) Iron, zinc plating ES-C (.)

2 Model E-LFH E-LFV E-LH E-LV Fitting materials E-LXY E-L Iron, zinc plating E-L * For installation of Sensor Adjuster E- L E-L E-L0 E-L0 E-L0 E-L E-L E-L E-L E-L0 E-L-T Iron, zinc plating E-L-T Iron, zinc plating E-L-T Iron, zinc plating Accessories Applicable sensor Page Count (mounting pitch on Description Material Count sensor side) Dimensions Holder (upper) Heat-resistant ABS resin Holder (lower) nylon Pipe Bolts M with Hexagonal Iron, nickel plating holes Bolts M 0 with hexagonal Iron, nickel plating EZ (.) holes E-R/E-R Phillips screws M Spring washer M Iron, nickel plating Plain washer M Iron, nickel plating Nuts M Iron, nickel plating Holder nylon Pipe Bolts M with hexagonal holes Nuts M Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. EZ (.) E-R/E-R Phillips screws M 0 Iron, zinc plating E-TP () Nuts M Iron, zinc plating E-TPR () Phillips screws M Slotted/Phillips screws M Hexagonal bolts M Hexagonal bolts M Slotted/Phillips screws M Iron, nickel plating E-R Iron, zinc plating EZ pre-wired model (.) ES-C (horizontal type) (.) Iron, zinc plating ES-C (vertical type) (.) Nut plate ET-S (/) Nut plate ET-S (/) Nut plate ET-S (/) ET-F () ET-F () Phillips screws M. Iron, zinc plating Spring washer M. Iron, zinc plating Phillips screws M. Iron, zinc plating Spring washer M. Iron, zinc plating Phillips screws M. Iron, zinc plating Spring washer M. Iron, zinc plating EZ pre-wired model (.) E-R (for installation of E-R) (.) EC-S0 (.) 0

3 Model E-L E-L E-L E-L E-L E-L0 E-L E-L E-L E-L E-L E-L0 E-L E-L E-L E-L E-L E-L0 Fitting materials Iron, black coating PBT (polybutylene terephthalate) Accessories Applicable sensor Page Count (mounting pitch on Description Material Count sensor side) Dimensions Slotted/Phillips screws M EZ pre-wired model (.) ENX-CA ENX-FA EX-DA-S/MDA ENC-LA ENC-SA None ECY-SD ENC-TA EX-NA EC-LDA EC-EDA EC-UDA Slotted/Phillips screws M EZ pre-wired model (.) None EX-NA None --- EZ-G Holder/bracket PBT (polybutylene terephthalate) Shaft (brace) Bolt with hexagonal hole (SUSXM) Nut Phillips screw (SUSXM) Slotted/Phillips screws Holder/bracket PBT (polybutylene terephthalate) Shaft (brace) Bolt with hexagonal hole (SUSXM) Nut Phillips screw (SUSXM) Slotted/Phillips screws Slotted/Phillips screws M (SUSXM) Note: Applicable models that appear shaded come with the Mounting Brackets at left as accessories. EZ (.) ES-R@/R@ (0) E-R EZ (.) ES-R@/R@ (0) E-R EZ pre-wired model (.) Nut plate ET-S@@M (/) ET-FD@@M () ET-FD@@M Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate Phillips screw Nut plate ZX-LD0@ ZX-LD00@ ZX-LD00@ ZX-LD00@ ENC-LH0 ENC-LH0 ENC-SH0H ENC-SH0 ENC-SH00 ENC-SH0H ENC-SH0 ENC-SH00 ENC-LH0

4 Slits E-L/E-S/E-R Model Slit width Installation procedure Applicable type E-S Width 0 mm Seal type EJM-0@ (T)-N E-S Width 0.,,, mm ES-CT@ E-S 0.-mm dia., mm ET-ST@ E-S 0.-mm dia., mm ET-FT@ E-SA 0. mm dia. E-SB -mm dia. Plug-in type E-SC -mm dia. E-SD Width 0. 0 mm EZ-T@@ E-SE Width 0 mm E-SF Width 0 mm E-S Width 0.,. mm Seal type E-TP E-TPR E-SA 0.-mm dia. E-SB -mm dia. Plug-in type ET-ST@M Note: Applicable models that appear shaded come with the Slits at left as accessories Reflectors (Refer to Dimensions on page.) Name Reflectors Non-fogging reflective plate Reflectors Special Reflector for EZM-B Item Model E-R E-RS E-RK E-R E-R E-R0 E-RP E-RSP E-RP Directional angle 0 min. * 0 min. * 0 min. Ambient operating temperature range to C 0 to 0 C to C Ambient storage temperature range 0 to 0 C 0 to C 0 to 0 C 0 to 0 C Ambient operating humidity range % to % % to % % to % Ambient storage humidity range % to % % to % Degree of protection IEC IP --- Phillips screws Accessories --- M, spring washers M, nuts M *. 0 or higher for EJM-R and EJK-R. *. 0 or higher for EG-R. Name Small reflector Tape reflector * Item Model E-R E-R E-R E-R-CA * E-RS E-RS-CA Directional angle 0 min. Ambient operating temperature range to C Ambient storage temperature range 0 to 0 C 0 to 0 C Ambient operating humidity range % to % % to % Ambient storage humidity range % to % % to % Degree of protection IEC IP Mounting Brackets Phillips screws M Accessories --- E-L0 ---, spring wash- (with screws) ers M, nuts M * Models ending in the suffix -CA are reflectors only for ET-SR@. E-RS E-RS-CA --- E-RS E-RS-CA Name Laser Reflectors Standard Short-distance transparent object detection Sheets Item Model E-R E-R E-R E-RS E-RS Ambient operating temperature range 0 to C (No icing) Ambient storage temperature range to 0 C (No icing) Ambient operating humidity range to % (No condensation) Ambient storage humidity range to % (No condensation)

5 Name * Models only for ENC-LH0 Standard Laser Reflectors Item Model E-R * E-R * E-RS0 * E-RS * Ambient operating temperature range 0 to C (No icing and no condensation) Ambient storage temperature range to 0 C (No icing and no condensation) Ambient operating humidity range to % (No condensation) Ambient storage humidity range to % (No condensation) Sheets

6 Mounting Bracket Dimensions E-L/E-S/E-R (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. E-L E-L0 Iron Four, R. 0±0. ±0. R dia. R. Two, R ± Iron 0 0±0. Two, R E-L Iron R. dia. max. Pushing out height: 0. min. Two, M.. R. R.. 0 E-L Two, R. 0 Two, R R. R.±0... Two,. dia. Two, R R.. R. R Iron. 0±0. R -M. dia. max. Pushing out height: 0. min.

7 E-L. 0 E-L R Four, dia R. Stainless steel R. 0 R R0±0. R.. Stainless steel. R R R.±0. dia. 0 E-L. E-L. Two, dia. 0 R Iron EA EA-M EA OA-, OA-N. Iron.. R... dia.... dia. R. 0 EA, OA-N EA-M, OA- 0.. EA 0±0.. E-LV.. 0..

8 E-L E-L Six, R... (.). Two, R.. R E-L E-L

9 E-LFH. 0. E-LFV. 0. EZ EZ dia. 0 dia. 0 Two,. dia. 0 Two,. dia. 0. E-LH. 0. E-LV. 0. EZ EZ dia. 0 dia Two,. dia. Two,. dia. 0

10 E-LXY E-L Four, R Pipe (B) Holder (A) 0 0 EZ 0.. Iron. 0. Two, R.. ±0. dia. dia. E-L Two, M Tap processing. dia dia. Note: The E-LXY consists of only the one joint holder (A) and pipe, and the two hexagonal bolts and nuts. It cannot be mounted to the Sensor alone. -mm-thick E-R reflector (order separately)... Center of pole brace E-L E-L Mounting Holes Two, M Two, R 0 0 ±0. dia. ES-R. (For EZ) An attached screw. Four, R. Two, R. (For ES-B) (For ES-R) 0 (A)* * Mounting Bracket can be attached to side (A) 0

11 E-L0.±0. E-L0 ± ± ±0.. 0 E-L0 R. R.. R0.. (.) R... R Two, dia. (). R.. R R. 0

12 E-L.-mm-thick Nut Plate Three, M R. max. (Four, R) 0. (.) (Two, R.) Two,. (Two, R) (Two, R). (Two, R.) (Two, R.). 0 E-L.-mm-thick Nut Plate Three, M (Two, R.)... (Four, R) Two, R 0.. (Two, R.) (Two, R) () R max (.). Two,. (Two, R.) E-L Nut Plate Three, M (Four, R) E-L (Two, R.). Four, M Tap processing.. ()..-mm-thick Two,. (Two, R.). (Four, R).-mm-thick E-L0... Four, M Tap processing. (.) E-L-T E-L-T E-L-T.. 0 A. Four, dia. (Mounting bracket holes) 0 Four, M. (Mounting sensor screws).. 0.-mm-thick. Iron Two, dia. 0 A+ Model Dimension A (mm) E-L-T 0 E-L-T 0 E-L-T 0

13 E-L E-L.. Four,.-dia. holes. (0.) R max... Two, dia. Four, R.. E-L Two, R E-L R. R. Two, 0 max.. Four, R.. Four, R... Two, dia... Two, R......

14 E-L. Four,. dia. E-L0 E-L.. Two, Polybutylene terephthalate 0... Four, R 0. Two, dia. 0 dia L Two,. dia. (SUS 0). Iron Polybutylene terephthalate Length (mm) Model L E-L0 E-L E-L Two, R. - Eight, R. Four,.. 0

15 E-L mm-thick.. Two, R.. () Three, M With Mounting Bracket (Example: ET-STM). Two, M 0.. E-L With Mounting Bracket (Example: ET-FDM) (.). Four, M Tap processing 0. (0.).-mm-thick..... Two, M

16 E-L. 0. Polybutylene terephthalate (.) Note: Use this Spacer when mounting the Sensor from the back. E-L0 E-L Nut plate Nut plate Mounting Brackets. Two, R... Two, M P=0. Two, R Mounting Brackets... Two, M P=0. dia.... dia mm-thick.0-mm-thick.. (.)..0-mm-thick Accessories: Phillips screws () (M 0, P=0., Stainless) Nut plate ()... (.)....0-mm-thick Accessories: Phillips screws () (M, P=0., Stainless) Nut plate () E-L E-L Mounting Brackets. Nut plate Two, M through holes Mounting Bracket. Nut Plate Two, M through holes R± ±0. ±0. Two, dia. ±0. 0..±0.. Thickness:. mm 0 0 ±0. ±0. 0..±0. Thickness:. mm Thickness:. mm Accessories: Phillips screws () (M, P=0., Stainless) Nut plate () Thickness:. mm Accessories: Phillips screws () (M, P=0., Stainless) Nut plate ()

17 E-L E-L Mounting Bracket Nut Plate Mounting Bracket Nut Plate.. Two, M through holes Two, M through holes R0. ±0. Two, dia..±0.. -.±0.. Two, R. Thickness:. mm -. Thickness:. mm. 0 Thickness:. mm Accessories: Phillips screws () (M, P=0., Stainless) Nut plate () 0 Thickness:. mm Accessories: Phillips screws () (M, P=0., Stainless) Nut plate () E-L0 Mounting Bracket Nut Plate. Four, R. Two, M through holes 0. ±0...±0....±0. ±0. 0. Eight, R Two, R Three, dia. Thickness:. mm ±0. 0.±0..± ±0. Thickness:. mm Accessories: Phillips screws () (M, P=0., Stainless) Nut plate ()

18 Reflector dimensions E-R E-RS E-RK * E-R E-L/E-S/E-R (Unit: mm) Tolerance class IT applies to dimensions in this datasheet unless otherwise specified. E-R () Two, dia. Material, reflective surface: acrylic Rear surface: ABS 0.. Four, dia. Material, reflective surface: acrylic Rear surface: ABS 0... Material, reflective surface: acrylic Rear surface: ABS E-R0. Two,. dia..... (0.). * E-RK only Coating on reflective surface.... Material, reflective surface: acrylic Rear surface: ABS Two, dia.. E-R E-R. E-R.. Material, reflective surface: acrylic Rear surface: ABS R Adhesive tape side. Two, dia. Material, reflective surface: acrylic Rear surface: ABS E-R-CA Mounting bracket.. Two,. dia.. Reflector. Eight, R. 0.. (.) Material, reflective surface: acrylic Rear surface: ABS Two,... R. M 0.. Retroreflector for EZM-B E-RP.. 0 Stainless steel Two,. dia. Mounting plate: stainless steel (SUS0) Two, R. Mounting Bracket: t 0. Reflector: t0. (adhesive tape side) Reflective surface: acrylic Note: The reflective plate and mounting plate () come as a set. Reflectors only for ET-SR@. Retroreflector for EZM-B E-RP Mounting bracket.. Reflector. Eight, R (.) Reflector: t0. Two, R. (adhesive tape side) Two,. dia. Mounting Bracket: t 0. Reflective surface: acrylic Mounting plate: stainless steel (SUS0) Note: The reflective plate and mounting plate () come as a set. 0. Retroreflector for EZM-B E-RSP Acryl Material, reflective surface: acrylic Rear surface: ABS Reflector 0 0. Two, dia.

19 E-RS E-RS-CA * E-RS E-RS-CA * 0. 0 Acrylics Four, R Adhesive tape side 0 0. E-RS E-RS-CA * Acrylics Four, R Adhesive tape side Acrylics Four, R Adhesive tape side E-R/R * E-R *.. 0 R. Two,. dia. Four, R. Four, R. R Two,. dia.. Four, R Four, R R R. E-RS * E-RS * Adhesive tape side Adhesive tape side *. Models ending in the suffix -CA are reflectors only for ET-SR@. *. These Reflectors are for EC-LDA-series Sensors. However, the E-R can also be used with an EZ-LR@ Retroreflective Laser Sensor.

20 E-R * E-R *. Two, dia Two, dia. 0 0 Material, reflective surface: methacrylic resin (PMMA) Rear surface: Polybutylene terephthalate (PBT) Material, reflective surface: methacrylic resin (PMMA) Rear surface: Polybutylene terephthalate (PBT) E-RS0 * 0. (excluding release paper) E-RS * 0 0. (excluding release paper) 0 Material, reflective surface: acrylic Material, reflective surface: acrylic *. Models only for ENC-LH0 0

21 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial Automation Company 0. In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation 0 All Right Reserved.