High strength water based pigment dispersions AQUIS & AQUIS PLUS

Transcription

1 High strength water based pigment dispersions AQUIS & AQUIS PLUS

2 AQUIS and AQUIS PLUS Our Service are water based, single pigment dispersions designed for broad compatibility in a wide range of applications. They are suitable for in-plant coatings as well as other water based applications including but not limited to latex, paper, caulks and adhesives. The broad product range available for both AQUIS and AQUIS PLUS allows for complete coverage of the color spectrum. The density, viscosity, ph, fineness of grind, color shade, strength and the rheological properties of these products are very tightly controlled in order to guarantee a high degree of color accuracy and reproducibility. At Heubach, customer satisfaction comes first. As a supplier of high-quality pigment and pigment preparation solutions we support our customers anywhere where pigments are in use. With technical service centers both globally and regionally we provide our customers with the support essential for the implementation of customer-specific requirements and solutions. Fully equipped technical laboratories and centers enable us to carry out tests for all relevant applications, such as printing inks, paints and coatings, including corrosion protection, coil and powder coatings and plastics. Custom-tailored color adjustments play a significant role in a wide variety of applications. We have extensive expertise in the development of colors for a variety of water based products, paint and coating systems. Depending on fastness properties, application or processing requirements, we can deliver the right color for your application. About us 1

3 AQUIS AQUIS are highly pigmented dispersions that are compatible in a wide range of applications. AQUIS dispersions are tightly controlled to a +/- 5 % tint strength gravimetrically and a maximum DE of 1. vs. standard. WW3 Titanium Dioxide P.W RW YW911P Arylide Yellow MS RW YW811P Arylide Yellow MS VW P.V. 23 Carbazole Violet YW331 Diarylide Yellow HR P.Y BW3521 Phthalocyanine Blue RS P.B YW331 Yellow Iron Oxide P.Y BW3571 Phthalocyanine Blue GS P.B. 15: OW327 DNA Orange P.O GW345 P.G OW3212 Pyrazolone Orange P.O GW3454 P.G RW31 Iron Oxide Red P.R GW3459 P.G RW3125 Toluidine Red - Light P.R KW372 P.Bk RW3147 Naphthol Red BS P.R KW3729 Conductive P.Bk RW317 Calcium Red 2B P.R. 48: KW375 P.Bk Due to the limitation of the printing process, some slight variations between the color as illustrated above versus the colorant may be observed. 2 Product Portfolio 3

4 AQUIS PLUS AQUIS PLUS are highly pigmented dispersions that are environmentally friendly and are free of VOC s (EPA Method 24), Alkyl Phenol Ehtoxylates and Formaldehyde. AQUIS PLUS dispersions are tightly controlled to a +/- 5 % tint strength gravimetrically and a maximum DE of 1. vs. standard. VOC 1) WWP61 Titanium Dioxide P.W YWP74 Arylide Yellow YWP141 Diarylide Yellow P.Y YWP42 Yellow Iron Oxide P.Y OWP161 Disazo Orange P.O RWP17 Naphthol Red BS P.R RWP254 Diketo-Pyrrolo-Pyrrole P.R RWP222 Napthol Red P.R RWP11 Red Iron Oxide P.R RWP571 Lithol Rubine P.R. 57: RWP VWP23 Carbazole Violet P.V BWP153 Phthalocyanine Blue GS P.B. 15: BWP15 Phthalocyanine Blue RS P.B BWP6 Indanthrone P.B GWP7 P.G XWP7 Raw Umber P.Br KWP7 P.Bk KWP71 P.Bk Due to the limitation of the printing process, some slight variations between the color as illustrated above versus the colorant may be observed. 1) As measured by EPA test Method 24

5 Our product specifications, application information and any other information in this document is based on our current state of knowledge at the Revision Date mentioned below. They are non-binding and cannot be taken as a guarantee. The processing company must establish the suitability of individual products itself. As their use lies beyond our knowledge and control, we cannot accept any liability relating to the use of our products in particular applications. In addition to that, the legal rights of third parties must always be considered. The specification agreed between the customer and ourselves is the basis upon which our general sales and delivery conditions are set and is the deciding factor concerning any liabilities. Our standard specification is then valid if no specification has been agreed upon between the customer and ourselves. sales@heubachcolor.de 1/218