01 ABRASIVE PRODUCT. From QUALITY BRANDS :

Transcription

1

2 0 ABRASIVE PROUC Abrasive and Finishing Product Abrasive and finishing product...37 Cutting wheel...38 Fiber and paper disc...38 Flexible depressed centre wheel...38 Abrasive Cutting ool CBN and diamond dresser grinding wheel iamond dresser Standard shapes for diamond and CBN wheel Standard shapes for grinding wheel Abrasive for Cast Iron and Steel epressed center wheel...39 Aerospace Aerospace...2 Burr ungsten carbide burr Coated Abrasive ool Fan grinder...23 Polinox...24 Combidisc Combidisc grinding tool Cut-off Wheels Chopsaw...3 Cut-off wheel Cut-off wheel line SG, arbor...28 Cut-off wheel performance line SG...28 Cut-off wheel PS-forte...27 Cutter HSS rotary cutter Cutter...40 iamond Wheel iamond wheel...40 File Aluminium file...4 Corinox file...4 iamond file...7 Machinist s file Pferd needle file...4 Precision file...5 Special file...4 Adjustable file, cylinder hone...42 File set Fine Grinding Abrasive spiral band, drum holder...9 Grinding Wheel Conventional grinding wheel , 60 Reinforced grinding wheel...26 Hand eburrer Car body file...6 Hand deburrer...6 Industrial Brush Brushing...34 Brushing...36 Cup brush...36 Mounted brush...34 Wheel brush...35 Wheel brush and cup brush...35 Mounted Point Mounted point...5 Mounted point, EN (IN) series stock range Policap Policap tool set...22 Polifan Flap isc Polifan flap disc Poliroll Arbors for poliroll...22 Poliroll cartridge roll...22 Poliroll tool set...22 Reinforce Grinding Wheel Performance SG...25 Special/high performance SGP...27 Universal line PSF...25 Wire Brush Cup brush Wire brush From QUALIY BRANS :

3 PFER ool for Pipeline Construction AEROSPACE ABRASIVE PROUC

4 AEROSPACE Service and Security AEROSPACE Finding the most suitable tool for a specific application problem is an exacting task in view of the complex requirements on hand. PFER relies on an experienced key account management to develop on-site application engineering solutions in conjunction with the user. Joint workshops are held to analyze processes and to develop alternative solution proposals in an effort to cost reduction through process optimization. Objective: o meet and exceed user expectations. Although PFER supplies the industry s broadest range of tools with over 6,500 items available ex stock, some highly specialized processes do require customized tools to achieve the desired productivity. With more than 20,000 customized tools which are made to order i.e., special products made for a specific application PFER ensures optimum solutions and best machining results at maximum cost efficiency. In co-operating with its customers, PFER meets these partners objectives with precision and outstanding reliability through Excellent tools meeting individual customer needs Just-in-time delivery Personalized catalogues Application recommendations PFER quality is EN ISO 900 certified. 2 ABRASIVE PROUC

5 MACHINIS S FILE For professional use in industry and the crafts An appropriate steel microstructure, essential for uniform hardness. Exact shape and uniform cut from tang to tip Ideal tooth geometries for every application Flat File Bastrad Smooth Inch escription 22 PF PF Flat file (2.0 x 2.5mm) 22 PF PF Flat file (6.0 x 4.0mm) 22 PF PF Flat file (20.0 x 5.0mm) 22 PF PF Flat file (25.0 x 6.0mm) 22 PF PF Flat file (30.0 x 6.5mm) 22 PF PFZ Flat file (35.0 x 7.5mm) SB22 PF PF Flat file w/ Handle (2.0 x 2.5mm) SB22 PF PF Flat file w/ Handle (6.0 x 4.0mm) SB22 PF PF Flat file w/handle (20.0 x 5.0mm) SB22 PF PF Flat file w/handle (25.0 x 6.0mm) SB22 PF PF Flat file w/handle (30.0 x 6.5mm) SB22 PF PFZ Flat file w/handle (35.0 x 7.5mm) hree Square File Square File 22 SB22 52SP SB52SP Bastrad Smooth Inch escription 32 PF PF hree Square (8.0mm) 32 PF PF hree Square (.0mm) 32 PF PF hree Square (5.0mm) 32 PF PF hree Square (7.5mm) 32 PF PFZ hree Square (20.0mm) SB32 PF PF hree Square w/handle (8.0mm) SB32 PF PF hree Square w/handle (.0mm) SB32 PF PF hree Square w/handle (5.0mm) SB32 PF PF hree Square w/handle (7.5mm) SB32 PF PFZ hree Square w/handle (20.0mm) Benefits : Available in : cut (for rough work, coarse stock removal), cut 3 (pre finishing, smoothing, refining) Pferd can supply with or without ergonomic handle. Application: for surface work, deburring, stock removal on rectangular geometries. Filing of shapes. Half-Round-Pointed File Bastrad Smooth Inch escription 52SP PF PF Half Round Pointed (0.4 X 2.5mm) 52SP PF PF Half Round Pointed (6.0 X 4.5mm 52SP PF PF Half Round Pointed (20.0 X 6.0mm) 52SP PF PF Half Round Pointed (25.0 X 7.0mm) 52SP PF PF Half Round Pointed (30.0 X 8.5mm) 52SP PF PFZ Half Round Pointed (35.0 X0.0mm) SB52SP PF PF Half Round Pointed (0.4 X 2.5mm SB52SP PF PF Half Round Pointed (6.0 X 4.5mm) SB52SP PF PF Half Round Pointed (20.0 X 6.0mm) SB52SP PF PF Half Round Pointed (25.0 X 7.0mm) SB52SP PF PF Half Round Pointed (30.0 X 8.5mm) SB52SP PF PFZ Half Round Pointed (35.0 X0.0mm) Hand File Bastrad Smooth Inch 52SP SB52SP 2 SB2 escription 2 PF PFZ Hand File (2.0 x 2.5mm) 2 PF PF Hand File (6.0 x 4.0mm) 2 PF00030 PF Hand File (20.0 x 5.0mm) 2 PF PF Hand File (25.0 x 6.0mm) 2 PF PF Hand File (30.0 x 6.5mm) SB2 PF PF Hand File w/handle (6.0 x 4.0mm) SB2 PF PFZ Hand File w/handle (20.0 x 5.0mm) Round File MACHINIS S FILE Bastrad Smooth Inch escription 42 PF PF Square (8.0mm) 42 PF PF Square (.0mm) 42 PF PF Square (5.0mm) 42 PF PF Square (7.5mm) 42 PF PFZ Square (20.0mm) SB42 PF PF Square w/ Handle (8.0mm) SB42 PF PF Square w/ Handle (.0mm) SB42 PF PF Square w/ Handle (5.0mm) SB42 PF PF Square w/ Handle (7.5mm) SB42 PF PFZ Square w/ Handle (20.0mm) SB = file with this cut is also available with ergonomic handle in a self-service pack Please place the letters sb before the order number, e.g. Sb32, 50mm, bastrad. Bastrad Smooth Inch escription 62 PF PF Round (4.0mm) 62 PF PF Round (6.0mm) 62 PF PF Round (7.5mm) 62 PF PF Round (9.5mm) 62 PF PF Round (2.0mm) 62 PF PFZ Round (5.0mm) SB62 PF PF Round (4.0mm) SB62 PF PF Round (6.0mm) SB62 PF PF Round (7.5mm) SB62 PF PF Round (9.5mm) SB62 PF PF Round (2.0mm) SB62 PF PFZ Round (5.0mm) ABRASIVE PROUC 3

6 MACHINIS S FILE Knife File Machinist s Files In Plastic Pouch Contents : Five assorted shapes SPECIAL FILE Bastrad Smooth Inch escription 72 PFZ00003 PF Knife File (6.0x5.2x.25mm) 72 PF PF Knife File (20.0x6.4x.5mm) 72 PF PFZ Knife File (25x7.9x.75mm) SB72 PFZ00004 PF Knife File w/handle (6.0x5.2x.25mm) SB72 PF PF Knife File w/handle (20.0x6.4x.5mm) SB72 PF PFZ Knife File w/handle (25x7.9x.75mm) each file comes with matching ergonomic handle Order no. escription PF WR 250 Machinist file set #2 (5) ALUMINUM FILE Hand File PFER NEELE FILE Pferd Hand Needle File Inch escription PF W 2 Hand File (30.0 x 6.5mm), Cut 0 SPECIAL FILE Lathe File Inch escription PF E 0 Hand File (25.0 x 6.0mm), Cut Needle File Set in Pouche Box of Needle File Application for : eburring, Shapping and refining of round holes Filling of rectangular geometries Filling on internal radius profiles Pouch contains : 2 needle files Flat Knife Hand Half round Crossing Barrette hree square Flat with round edges Square Hand with round edges Round Crossing oval Order no. escription PF /4 40 Needle file set 40 mm cut PF /6 60 Needle file set 60 mm cut PF /8 80 Needle file set 80 mm cut 0 PF / Needle file set 200 mm cut 0 Box contains : 2 needle files Flat Knife Hand Half round Crossing Barrette hree square Flat with round edges Square Hand with round edges Round Crossing oval Order no. escription PF NFB Needle file set 40 mm cut PF00033 NFB Needle file set 60 mm cut escription PF Hand Needle Files, Cut PF Hand Needle Files, Cut 2 PF Hand Needle Files, Cut 0 PF Hand Needle Files, Cut 2 CORINOX FILE CORINOX files have an exceptional surface hardness of 200HV (Vickers scale). Benefits : Suitable for use on difficult-to-file materials such as high-garde steels (high-temperature steel, rare alloys), fibre-reinforced plastics. Corinox Pottance files hand Swiss Cuts Cross Section Mathing Handle COR PFZ00007 PFZ PFZ x 4 FH 3 2 COR PFZ00008 PFZ00002 PFZ x 5 FH 4/ 2 COR PFZ00009 PFZ PFZ x 6 FH 4/ 2 CORINOX Needle Files Workpiece materials: High grade steels Stainless steel Heat resisting alloys Fibre-reinforced plastic Industry Group: ool and mouldmaking Patternmaking urbine Production/maintenance Aircraft construction Swiss Cuts Shank ia CORINOX PFZ PFZ CORINOX PFZ PFZ CORINOX PFZ PFZ CORINOX PFZ PFZ CORINOX PFZ PFZ CORINOX PFZ00003 PFZ ABRASIVE PROUC

7 PRECISION FILE Riffler File 900P 90P 90P 9P 98P 920P 930P 93P PRECISION FILE 93P 94P 95P 96P 97P Recommendation for use : Riffler files can be used with or without riffler file holder 940P 94P 942P 943P 943P 50mm, smallest type of riffler files (Inch) Swiss Cuts 2 4 EAN Cross - Section Suitable Holder 900p ,2x3,2 RFH50 2 0,0 90p ,0x,3 RFH50 2 0,0 90p ,3x,2 RFH50 2 0,0 9p ,3x,2 RFH50 2 0,0 93p ,7x.5 RFH50 2 0,0 94p ,5x3,5 RFH50 2 0,0 95p ,5x3,5 RFH50 2 0,0 96p ,2x3,2 RFH50 2 0,0 97p ,2x3,2 RFH50 2 0,0 98p ,8x,7 RFH50 2 0,0 920p ,9x,5 RFH50 2 0,0 930p ,2x3,2 RFH50 2 0,0 93p ,7x,7 RFH50 2 0,0 940p ,7 RFH50 2 0,0 94p ,2 RFH50 2 0,0 942p ,6 RFH50 2 0,0 943p ,0 RFH50 2 0,0 952p ,4x4,2 RFH50 2 0,0 Your # source for... Welding kg Equipment Section 22 ABRASIVE PROUC 5

8 HAN EBURRER Hand eburrer B 500 Ideally suited for economic and different deburring, chamfering and refining of different materials and contours. Hard-to-reach places, holes, inner and outer diameters, threads and keyways can be easily worked on manually. HAN EBURRER BS 00 BS 08 BS 200 BC 04 BC 65 he three different, easily-changeable deburrers (blades, mini-blades and countersink) are easy to guide and use with the special holder. he tools fit beautifully to the counters of workpieces. he pivot-mounted adapter system makes handling and changing the deburring device very easy. he handy, ergonomic design of the flexible plastic holder and the tough, hard inner part protects against sharp edges and corners during work. he angular collar prevents the deburring device rolling away, thus providing maximum safety. Pferd has the following on offer: hree deburring blades for work on : - Steel, aluminium - Non-ferrous metals and cast iron, - Plastics and other hard materials One mini-blade for general work on very small geometrics of different materials wo pivot-bearing deburring countersinkss for general use on bores of different materials EAN Use for kg Holder for eburrer H All s 0,5 eburring Blade BS Steel Aluminium 0 0,035 BS Plastics, other hard materials 0 0,035 BS Non-ferrous metals, cast iron 0 0,035 Mini-Blades B General Use 0,007 eburring Countersink BC General Use 0,07 BC General Use 0,033 CAR BOY FILE Car Body File Blade Adjustable Holder for Car Body File Cut 00 Extra Coarse Cut 0 Very Coarse Cut Coarse Cut 2 Medium Cut 3 Fine Special Cut Positive rake angle Uniquely convex surface Unsurpassed sharpness of teeth. Benefits : Application : these files are ideal for any type of sheet metal work. Requiring a particularly smooth and scratch - free finish. Since the file leaves no scratch marks, the filed surface can be painted immediately without any prior polishing. escription PF b 300 Car Body Files 300mm # PF b 350 Car Body Files 300mm #00 PF b 350 Car Body Files 300mm #0 PF b 350 Car Body Files 300mm #2 PF b 350 Car Body Files 300mm #3 Suitable for File PF BH25/ escription Adjustable Holder 4 f/car Body File 6 ABRASIVE PROUC

9 IAMON FILE iamond Files F 2 hand F 32 three square F 32 three square F 42 square F 52 half round F 52 half round F 62 round escription PF00085 F2 00 iamond File 26 PF00086 F2 25 iamond File 26 PF F2 50 iamond File 26 PF F2 200 iamond File 5 PF00024 F32 00 iamond File 26 Apply only slight pressure to the file, especially in workpiece edge areas Use a coarse grit for roughing, medium grit for general purpose filing, and fine grit for finishing applications. Grit sizes are stated according to the FEPA grading scale. Benefits : Advantages of electroplated diamond tools he abrasive grains project well out of the bond, leaving large chips spaces which prevent tool loading even at removal rates Sharp, super hard abrasive particles ensure maximum cutting performance without undesirable heat build-up ools are coated with just a single layer of abrasive grains. hey are there fore cheaper than other diamond and CBS tools, which makes them suitable for processing smaller batch sizes Order no. escription PF F iamond File 5 PF00023 F52 00 iamond File 26 PF00095 F iamond File 5 PF F iamond File 5 CAR BOY FILE AN IAMON FILE Set of iamond Riffler Files Contents : file each of the following: F6 (crossing) F22 (hree square) F8 (flat) F24 (round) F20 (square) Available in 26 grit escription PF F Set of iamond Riffler File 26 Set of iamond Needle Files Contents F4205: file each of the following: F42 (hand) F432 (three square) F442 (square) F452 (half round) F462 (round) Available in 9, 26, 8 grit escription PF00054 F Set of iamond Needle File 9 PF F Set of iamond Needle File 26 PF F Set of iamond Needle File 8 UNGSEN CARBIE BURR ungsten Carbide Miniature Burrs with 3mm Shank ungsten Carbide burrs are designed for machining material of virtuallity any strength. heir superior performance reflects an optimum combination of key parameter such as shape number of flutes, spiral angle, rake angle and concentricity. Benefits : Ensures an improved protection of operator safety and health. Reduces power tool wear Provides smooth operating behaviour Prevents chatter marks PF PF PF PF PF PF00007 PF PF PF PF ZYA-S 020/3 ZYA 020/3 ZYA-S 033/3 ZYA 033/3 ZYA-S 0607/3 ZYA 0607/3 ZYA-S 063/3 ZYA 063/3 HM 3B 0307/3 HM 3B 063/3 Available Cuts 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P Head ia. x Head 2 x 0 2 x 0 3 x 3 6 x 7 6 x 7 6 x 3 6 x 3 6 x 3 3 x 7 6 x 3 Shaft ia. x Overall 3 x 40 3 x 40 3 x 43 3 x 43 3 x 37 3 x 37 3 x 43 3 x 43 3 x 37 3 x 43 ABRASIVE PROUC 7

10 UNGSEN CARBIE BURR UNGSEN CARBIE BURR ungsten Carbide Miniature Burr with 3mm Shank PF PF PF PF PF PF PF PF PF PF WRC 020/3 WRC 033/3 WRC 063/3 WKN S0307/3 WKN 0307/3 WKN-S 0607/3 WKN 0607/3 KU 0302/3 KU 0403/3 KU 0605/3 Available Cuts 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P Head ia. x Head 2 x 0 3 x 3 6 x 3 3 x 7 8 o 3 x 7 8 o 6 x 7 0 o 6 x 7 0 o 3 x 2 4 x 3 6 x 5 Shaft ia. x Overall 3 x 40 3 x 43 3 x 43 3 x 37 3 x 37 3 x 37 3 x 37 3 x 33 3 x 34 3 x 35 PF PF PF PF PF PF PF PF PF PF SKM 0307/3 SKM 03/3 SKM 063/3 RBF 0307/3 RBF 063/3 SPG 0307/3 SPG 033/3 SPG 063/3 RE 0307/3 RE 060/3 Available Cuts 3P 3P 3P 3P 3P 3P 3P 3P 3P 3P Head ia. x Head 2 x 0 22 o 3 x 3 4 o 6 x 3 26 o 3 x 7 3 x 7 6 x 7 6 x 7 3 x 2 4 x 3 6 x 5 Shaft ia. x Overall 3 x 37 3 x 4 3 x 43 3 x 37 3 x 43 3 x 37 3 x 43 3 x 43 3 x 37 3 x 40 Set of ungsten Carbide Miniature Burr Contents : 5 tungsten carb. min. burrs burr each of the following types: ZYA 020/3 SPG 0307/3 ZYA 023/3 RE 0307/3 ZYA 0607/3 RE 060/3 ZYA 063/3 KU 0403/3 HM 3 B0307/3 SKM 063/3 WRC 020/3 RBF 0307/3 WRC 033/3 RBF 063/3 WKN 0307/3 Shank ia. escription PF HM 3 Set of ungsten Carbide Miniature Burrs 5pcs Standard Shape Cylindrical ZYA without end cut d l2 l d2 Shank ia. d2 Available Cut Head ia. x d x I2 Overall I PF ZYA PLUS 4 x 3 55 PF00075 ZYA PLUS 6 x 6 55 PF ZYA PLUS 8 x PF ZYA PLUS 0 x PF00006 ZYA PLUS 0 x PF00007 ZYA PLUS 2 x PF00095 ZYA PLUS 6 x ABRASIVE PROUC

11 UNGSEN CARBIE BURR Standard Shape Cylindrical ZYA-S with end cut l2 l d Shank ia. d2 Available Cut Head ia. x d x I2 Overall I PF ZYAS PLUS 4 x 3 55 PF00002 ZYAS PLUS 6 x 6 55 PF ZYAS PLUS 8 x PF ZYAS PLUS 0 x 3 53 PF00005 ZYAS PLUS 0 x PF ZYAS PLUS 0 x PF ZYAS PLUS 2 x PF ZYAS PLUS 6 x UNGSEN CARBIE BURR d2 Flame Shape B d l2 l Shank ia. d2 Available Cut Head ia. x d x I2 Overall I d2 PF HM B PLUS 8 x PF00003 HM B PLUS 2 x PF00090 HM B PLUS 6 x Ball Shape KU d Shank ia. d2 Available Cut Head ia. x d x I2 Overall I l2 PF KU PLUS 4 x PF KU PLUS 6 x l PF KU PLUS 8 x PF KU PLUS 0 x PF KU PLUS 2 x d2 PF KU PLUS 6 x PF KU PLUS 20 x 8 58 Cylindrical Radius End WRC l l2 d Shank ia. d2 Available Cut Head ia. x d x I2 Overall I PF00096 WRC PLUS 4 x 3 55 PF WRC PLUS 6 x 6 55 PF WRC PLUS 8 x PF00004 WRC PLUS 0 x PF WRC PLUS 0 x PF WRC PLUS 2 x PF WRC PLUS 6 x ABRASIVE PROUC 9

12 UNGSEN CARBIE BURR UNGSEN CARBIE BURR Standard Shape Point ree Shape SPG d l2 l d2 Shank ia. d2 Available Cut Head ia. x d x I2 Overall I PF SPG PLUS 6 x 8 55 PF SPG PLUS 0 x PF SPG PLUS 0 x PF SPG PLUS 2 x PF0006 SPG x PF00008 SPG PLUS 2 x PF SPG PLUS 2 x PFZ SPG PLUS 6 x PFZ SPG PLUS 6 x Conical SKM l l2 d Shank ia. d2 Available Cut Head ia. x d x I2 Angle α Overall I PF0008 SKM PLUS 6 x 8 8 o 55 PFZ SKM x 8 8 o 55 PF SKM PLUS 0 x o 60 PFZ00004 SKM x o 60 d2 PF00000 SKM PLUS 2 x o 65 PFZ SKM x o 65 Conical Cone KSJ + KSK d Shank ia. d2 Available Cut Head ia. x d x I2 Angle α Overall I l2 PF KSJ x 5 60 o 50 PFZ KSJ x 3 60 o 50 l PF KSJ x 3 60 o 53 PF KSK x 0 90 o 50 PF KSJ x 3 60 o 56 d2 PF KSK x 8 90 o 53 ree with Radius End RBF l2 l Conical with Radius End KEL l2 l d r d2 d d2 Shank ia. d2 Available Cut Head ia. x d x I2 Radius Overall I PF RBF PLUS 6 x PF RBF PLUS 8 x PF00006 RBF PLUS 0 x PFZ RBF x PF RBF PLUS 2 x PFZ RBF ALU 2 x PF RBF PLUS 2 x PF RBF PLUS 6 x Shank ia. d2 Available Cut Head ia. x d x I2 Radius Overall I PF KEL PLUS 0 x PFZ KEL ALU PLUS 0 x PFZ KEL x PF KEL PLUS 2 x PF KEL PLUS 2 x PFZ KEL ALU 2 x PFZ KEL x PF KEL PLUS 6 x ABRASIVE PROUC

13 UNGSEN CARBIE BURR Standard Shape Oval RE l2 l Set of tungsten carbide burr d d2 Shank ia. d2 Available Cut Head ia. x d x I2 Radius Overall I PF RE PLUS 6 x PF RE PLUS 8 x PF RE PLUS 0 x PF RE PLUS 2 x PF RE PLUS 6 x his PFER set of tungsten carbide burrs includes the most common shapes and dimensions. It thus covers the most widespread applications and requirements. Contens : 22 tungsten carbide burrs one each of the following (cut 5, 3mm shank dia.): ZYA-S 020 ZYA-S 033 WRC 020 WRC 033 WKN 0307 RE 0307 RBF 0307 SPG 0307 UNGSEN CARBIE BURR One each of the following (cut 3 PLUS, 6mm shank dia.): ZYA-S 066 ZYA-S 03 ZYA-S 225 WRC 066 WRC 225 SKM 068 SKM 020 KU 0605 KU 0807 KU 20 KU 64 SPG 068 SPG 020 SPG 225 Available Cut PF HM See above C Burr Set C Burr Set Contents : 5 tungsten carbide burrs, shank dia. 6mm: piece each : ZYA 066/6 C3 Plus KU 0605/6 C3 Plus WRC 066/6 C3 Plus SPG 068/6 C3 Plus RBF 068/6 C3 Plus Cut g EAN Shank Ø6mm 506HM Contents : 5 tungsten carbide burrs, shank dia. 6mm: piece each : ZYA 225/6 C3 Plus KU 20/6 C3 Plus WRC 225/6 C3 Plus SPG 225/6 C3 Plus RBF 225/6 C3 Plus Cut g EAN Shank Ø6mm 506HM Set of H.S.S Rotary Cutter Set 8 H.S.S he metal box keeps these tools clean, protected, and always neatly arranged. Contents : 0 H.S.S. rotary cutters each of the following types: HSS A 225 S HSS C 225 HSS A 066 S HSS A 03 S HSS K 068 HSS L 630 HSS C 066 HSS K 630 HSS K 230 HSS F 20 Shank ia. Available Cut PF HSS 6 3 Set of H.S.S Rotary Cutter Set 82 H.S.S Contents : 0 H.S.S. rotary cutter each of the following types: HSS W 220 HSS A 625 HSS A 03 S HSS K 630 HSS L 020 HSS L 630 HSS 45 HSS O 625 HSS G 020 HSS F 64 he plastic box with transparent cover keeps these tools clean, protected, and always neatly arranged. Shank ia. Available Cut PF HSS ABRASIVE PROUC

14 BURR UNGSEN CARBIE BURR C Burrs HICOA Advantages : Effective chip discharge due to improved anti-adhesion characteristics Low thermal loads More effective production by working at higher speed Longer tool life Coating HC-E for ironand steel materials : Multi-purpose coating for steel and cast iron High wear resistance High resistance against thermal changes ough coating Coating HC-H for high temperature resistant materials : Mainly used for high temperature resistant non-ferrouos metals Low fiction values, low heat build-up Good combination of wear and oxidisation resistance. Result: reduced chemical wear Coating HC-NFE for aluminium and non-ferrous metals : Mainly used for long-chipping and cloying non-ferrous metals Highest standar of stock removal and tool life Improved anti-friction and anti-adhesion characteristics Recommended rotational speed range o determine the recommended cutting speed (m/mm), please proceed as follows :. Select the material group that is to be machined 2. etermine the type of application 3. Select the cut 4. Establish the cutting speed range 5. Select the required burr diameter 6. he cutting speed range and the burr diameter determine the recommended rotational speed range (rpm) o determine the recommended rotational speed (rpm), please proceed as follows Note : Normally, all tungsten burrs are available with coatings Please ask about alternative models and coatings Coating HC-E for iron and steel materials Coating HC-H for high temperature resistant materials Coating HC-NFE for aluminium and non-ferrous metals Material Groups Application Cut Coating Cutting Speed Steel, Cast Steel Non-Ferrous Metals Cast Iron Non-hardened, non-heat treated steels up to 200N/ mm2 (<38HRC) Hardened, heat-treated steels exceeding 200N/mm2 (<38HRC) Soft non-ferrous metals High-temperature resistant materials Grey cast iron, white cast iron Construction steels, carbon steels tool steels, non-alloyed steels, case-hardened steels, cast steels Coarse machining = high stock removal ool steels, tempering steels, alloyed steels, cast steels Alu-alloys, brass, copper, zinc Nickel based alloys, cobalt based alloys (aircraft engine and turbine construction) Cast iron with flake graphite EN-GJL, with nodular graphite cast iron EN-GJS, white annealed cast iron EN-GJMW, black cast iron EN-GJMB Coarse machining = high stock removal Fine machining = low stock removal Coarse machining = high stock removal Coarse machining = high stock removal 3 plus HC-FE m/min² ALU HC-FE HC-NFE m/min² m/min² m/min² 4 HC-H m/min² 3 plus HC-FE m/min² Example : ungsten carbide burr, cut 3 plus, diameter : 2mm. Coarse machining of non-hardened, non-heat-treated steels. Cutting speed : m/min Rotational speed : rpm ia Cutting Speed (m/min) Rotational Speed (rpm) ABRASIVE PROUC

15 UNGSEN CARBIE BURR C Burrs HICOA -Coating HC-FE Cylindrical burr according to IN 8032 with circumferential and end cut conforming to IN 8033 Cylindrical shape ZYA Ball shape with radius end WRC Cylindrical shape with radius end WRC BURRS AN CUER Pointed ree Shape SPG ree Shape with Radius End RBF Aplication ree Shape with Radius End RBF Cut 3 PLUS EAN Coating Coating Colour Shank ia. d₂ Burr ia. x d₁ x l₂ Overall l₁ Shank ø 6mm ZYA 066/ HC-FE Gold 6 6x ZYA 225/ HC-FE Gold 6 2x WRC 066/ HC-FE Gold 6 6x WRC 225/ HC-FE Gold 6 2x KU 0807/ HC-FE Gold 6 8x KU 009/ HC-FE Gold 6 0x SPG 225/ HC-FE Gold 6 2x RBF 225/ HC-FE Gold 6 2x HSS ROARY CUER HSS Rotary Cutters Shank ia.6mm Cylindrical burr shape rotary cutter with end cut Radius r kg Cylindrical shape with end cut A S HSS A 043S/6 HSS A 066S/6 HSS A 0820S/6 HSS A 03S/6 HSS A 020S/6 HSS A 225S/6 HSS A 625S/6 Cuts ALU EAN Shank ia. d₂ Burr ia. x d₁ x l₂ Overall l₁ x x x x x x x kg ABRASIVE PROUC 3

16 HSS ROARY CUER HSS Rotary Cutters Shank ia.6mm Flame shape rotary cutter CUER Cuts 3 EAN Shank ia. d₂ Burr ia x d₁ x l₂ Overall l₁ Radius r HSS B 0820/ x20 60, HSS B 230/ x ,0 5 0 HSS B 635/ x , kg Ball Shape F Cuts EAN Shank ia. d₂ Burr ia. x d₁ x l₂ Overall l₁ Angle α HSS G 068/ x HSS G 020/ x HSS G 225/ x HSS A 0820S/ x αα 82 kg Conical Pointed Shape G Cuts 2 3 EAN Shank ia. d₂ Burr ia. x d₁ x l₂ Overall l₁ Angle α Radius r HSS L 020/ x , HSS L 225/ x , HSS L 230/ x , HSS L 630/ x , HSS A 0820S/ x αα 82 kg Conical shape with radius end L Oval shape rotary cutter Cuts ALU 2 3 EAN Shank ia. d₂ Burr ia. x d₁ x l₂ Overall l₁ Radius r HSS O 060/ x0 55 2, HSS O 06/ x HSS O 220/ x HSS O 625/ x , kg Oval Shape O Inverted cone rotary cutter, tappering off towards the shank, with end cur Cuts 3 EAN Shank ia.d₂ Burr ia. x d₁ x l₂ Overall l₁ Angle α HSS W 23S/ x kg Inverted cone shape W with end cut 4 ABRASIVE PROUC

17 MOUNE POIN PFER offers a very extensive line of vitrified and resinoid-bonded mounted points. esigned to meet individual application needs, these products come in a broad range of grain types, grit sizes, hardness levels and shapes. he mounted points are manufactured on advanced production lines to high standards of dimensional accuracy and stability, consistent quality, and close tolerances. o select the correct group mounted point, the material, main fields of application and specific operating requirements have to be taken into consideration. his overview shows which different types (abrasive, bonds and hardness grades) are recommended for the various materials and the tasks at hand. Materials Normally it is necessary to determine the material to be machined. he various material groups are colour-coded and shown on the left-hand side of the chart below. Applications he application must then be selected according to the type of work on the material. We make the following differentiation : General use Surface grinding and Edge grinding applications It is necessary to differentiate the selection criterial into material, application and required surface finish to find the optimum mounted point bond and the grain mix have an imoact on the grinding output, tool life and aggressiveness of the tools. For general use, the emphasis is on the balance between grinding output and tool life In surface grinding, the mounted ponts are subject to fewer loads. his is why the mounted point bond is comparatively soft and designed to give high stock removal If edge grinding, the mounted points must be dimensionally stable is comparably hard and designed for a long tool life MOUNE POIN Mounted point hardness After determining the application, the hardness can be selected in the horizontal row. he highly suitable bond is shown with a black dot ( ). he hardness grade within the bonds ara arranged from :soft to hard. Bond Resinoid Bond Vitrified Bond Hardness Grade Hardness L Hardness N Hardness Hardness F-Alu Hardness H Hardness I Hardness J Hardness K Hardness M Hardness O Hardness R AW AN AH CN AWN AW AWCO ARN AW AR CU AW Hardness Material Groups Abrasive Grit Steel, Cast Steel Stainless Steel Non- Ferrous Metals Cast Iron Plastics and other materials Non-hardened, nonheat-treated steels up to 200N/mm² (<38HRC) Hardened, heat-treated steels exceeding 200N/mm² (<38HRC) Cast Steels Rust and acidresistant steels Soft non-ferrous metals Hard non-ferrous metals High-temperature resistant materials Grey cast iron, White Cast Iron Construction steels, carbon steels, tool-steels, nonalloyed steels, case-hardened steels ol steels, tempering steels, alloyed steels Non-alloyed cast steels, low-alloyed cast steels Austentic and ferritic stainless steels Alu-alloys, brass, copper, zinc Bronze, titanium, titanium alloys, hard aluminium alloys Nicket bassed alloys, cobalt based alloys (aircraft engine and turbine construction) Cast Iron with flake graphite ENGJL, with nodular graphite cast iron ENGJMW, black cast iron EN-GJMB FRP, hermoplastics, Rubber, Wood Recommended Cutting Speed 35-50m/s 35-50m/s 5-20m/s 20-40m/s 30-50m/s 30-50m/s 30-50m/s 30-50m/s 30-50m/s 25-40m/s 30-50m/s 5-20m/s Application General use on edge and surface Surface grinding with high stock removal Edge grinding with high form stability General use on edge and surface Surface grinding with high stock removal Edge grinding with high form stability Surface grinding with high stock removal Edge grinding with high form stability Surface grinding with high stock removal Edge grinding with high form stability General use on edge and surface Surface grinding with high stock removal Edge grinding and grinding of burning-in with high stock removal General Use on edge and surface * * * * * * Highly suitable Suitable Extra models for foundries * ABRASIVE PROUC 5

18 MOUNE POIN, EN (IN) SERIES SOCK RANGE MOUNE POIN Mounted Points are ideal for general use on steel surfaces, providing high abrasive and stock removal rates Naturally, a high stock removal rate reduces grinding time and labour costs Cost reductions are achieved despite increased tool consumption, since the reduction in labour costs more than compensates tool costs Cylindrical Points ZY Benefits : PFER mounted point are noted for their consistently superior stock removal, long service life, and high quality surface finishing performance High dimensional accuracy and stability, close manufacturing tolerances Availability of adapted bond types, grit sizes and hardness grades for any application he high concentricity of PFER mounted points: - Protects the operator s safety and health - Reduces the load on the power tool - Minimizes operating vibrations - Prevents chatter marks - Reduces wear Shank ia. ia. x Height (x) V = Vitrified Vitrified Bond 5 V Aluminium Oxide M AW O AR Coarse Fine Coarse Fine PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF ZY x PF00008 ZY x PF ZY x PF ZY x PF ZY x PF ZY x Please complete the order no. by adding the grit size. Ball KU Shank ia. V = Vitrified Vitrified Bond 5 V Aluminium Oxide M AW O AR Coarse Fine Coarse Fine PF KU PFZ KU PF KU PF KU PF KU PF KU PF KU PF KU PF KU PF KU PF KU PF KU Please complete the order no. by adding the grit size. 6 ABRASIVE PROUC

19 MOUNE POIN, EN (IN) SERIES SOCK RANGE Cylindrical Radius End WR Shank ia. V = Vitrified Vitrified Bond 5 V Aluminium Oxide M AW O AR Coarse Fine Coarse Fine PFZ WR PFZ00005 WR PFZ WR PFZ WR PFZ WR PFZ WR MOUNE POIN Please complete the order no. by adding the grit size. ree SP Shank ia. V = Vitrified Vitrified Bond 5 V Aluminium Oxide M AW O AR Coarse Fine Coarse Fine PF SP PFZ SP PF SP PFZ SP PF SP PFZ SP PF SP PF SP PF SP PF SP Please complete the order no. by adding the grit size. Cup O Shank ia. V = Vitrified Vitrified Bond 5 V Aluminium Oxide M AW O AR Coarse Fine Coarse Fine PF O PF O PF O PFZ O Please complete the order no. by adding the grit size. ABRASIVE PROUC 7

20 MOUNE POIN MOUNE POIN, EN (IN) SERIES SOCK RANGE apered KE Shank ia. V = Vitrified Vitrified Bond 5 V Aluminium Oxide M AW O AR Coarse Fine Coarse Fine PF KE PF KE PF KE PF KE PF KE PF KE PF KE PF KE PF00058 KE PF KE PF KE PF KE PF KE PFZ KE Please complete the order no. by adding the grit size. Mounted Point Set Mounted point set 200 hese hardness O tools with 6mm shank dia. are noted for their outstanding versatility, dimensional stability and edge-holding properties. he set contains 0 mounted points of various shape and sizes. Contents: One each of the following: ZY 03, ZY 320, ZY 2006, ZY 203, ZY 2025, KU 6 WR 2025, WK 2025, SP 320, KE 2020 Mounted point set 2002 his set comprises small mounted points, hardness O, with 3mm shank dia., universally suitable for many fine-grinding tasks. It includes the most common shapes and sizes. Contains 5 mounted points in various shapes and dimensions. Contents: wo each of the following: ZY 050, ZY 080, ZY 604. One each of the following: ZY 0408, ZY 063, ZY 0802, ZY 03, ZY 303, WR 050, KU 05, SP 0306, SP 086. Hardness Grit Size ia. Shank ia. PF O coarse 6 PF O fine 3 Assortments of Mounted Point Assortment of mounted points SSO 5300 High-performance mounted points, hardness M with 6mm shank, in a sales promoting display carton for (self-service) retail use. he choice of types reflects the most common applications. Contents: 00 mounted points with 6mm shanks dia. hardness M, coarse grit. 0pcs. per type ZY 620, ZY 2025, ZY 2506, ZY 2532, ZY 326, ZY 3232, ZY 4020, SP 2032, KE 2032, KE Hardness Grit Size ia. Shank ia. PF SSO 5300 M coarse 6 8 ABRASIVE PROUC

21 ABRASIVE SPIRAL BAN, RUM HOLER PFER offers an extensive range of abravise spiral bands and drum holders rum Holders are fully reusable Slot allow the drum to expand during grinding, thereby tensioning the abrasive sleeve A special manufacturing method ensures an outstanding to life even in heavy duty use Particularly high stock removal and very aggressive abrasive action Rubber rum Holder Cylindrical Rubber rum Holder Conical Applications : Weld dressing on structural steelwork Find grinding in the thank and process equipment construction Rework in assembly and repair project Refinement of edges and contours in jet engine construction Head ia. x Head Height (x) mm Shank ia. mm Max. rpm Min. rpm PF00099 GK 060/3 6 x PF GK080/6 8 x PFZ00006 GK00/6 0 x PF GK020/6 0 x PFZ GK30/6 3 x PFZ GK325/6 3 x PF GK530/6 5 x PF GK2220/6 22 x PF GK2525/6 25 x PF GK3020/6 30 x PF GK3030/6 30 x PFZ GK3825/6 38 x PFZ GK4530/6 45 x PF GK525/6 5 x PF GK6030/6 60 x Head ia. x Head Height (x) mm Shank ia. mm Max.rpm Min. rpm PFZ GK /4 x PFZ GK /22 x PFZ GK /22 x FINE GRINING 2 Abrasive Spiral Bands GSB (000pcs) KSB (25pcs) Abrasive spiral bands with aluminium oxide grain are universally suitable for many materials. with : Small Pack KSB = for occasional requirements Bulk Pack GSB = Cost efficient packaging unit for volume users Order no. x escription PF KSB x 0 Abrasive Spiral Bands grit PF KSB x 0 Abrasive Spiral Bands grit PF00074 KSB x 20 Abrasive Spiral Bands grit PF KSB x 20 Abrasive Spiral Bands grit PF KSB x 30 Abrasive Spiral Bands grit PF0009 KSB x 30 Abrasive Spiral Bands grit PF KSB x 20 Abrasive Spiral Bands grit PF KSB x 20 Abrasive Spiral Bands grit PF00043 KSB x 20 Abrasive Spiral Bands grit PF KSB x 20 Abrasive Spiral Bands grit PFZ KSB x 25 Abrasive Spiral Bands grit PFZ KSB x 20 Abrasive Spiral Bands grit PF00076 KSB x 30 Abrasive Spiral Bands grit PF KSB x 30 Abrasive Spiral Bands grit PF00027 KSB x 30 Abrasive Spiral Bands grit PFZ00007 KSB x 25 Abrasive Spiral Bands grit PFZ KSB x 30 Abrasive Spiral Bands grit 80 0 PF KSB x 25 Abrasive Spiral Bands grit 80 0 PFZ KSB x 30 Abrasive Spiral Bands grit 80 0 PFZ KSB /4 x 63 Abrasive Spiral Bands grit PFZ KSB /22 x 30 Abrasive Spiral Bands grit PFZ KSB /22 x 60 Abrasive Spiral Bands grit ABRASIVE PROUC 9

22 COMBIISC COMBIISC GRINING OOL Easy to use Rapid tool change No adhesion problems Firmly secured disc isc does not become detached under influence of heat Vibration-free operation due to perfectly centralized tool ools come in 20-75mm dia. in various grit types and sizes COMBIISC Holders SBH cd system COMBIISC holders are available in three types, colour-coded as follows: soft (W) = grey medium-hard (M) = blue hard (H) = red Applications : ool and mouldmaking Patternmaking Mechanical engineering Automotive applications Aerospace industry Jet engine construction and maintenance Construction of tanks, pressure vessels and process equipment (e.g., for the foodstuff processing and chemical industry) Adapter AF 4-/4 SPV-20 COMBIISC Abrasive discs C Aluminium oxide A COMBIISC Abrasive discs C Aluminium oxide A-Forte he following adapters are available: AF 4-/4 (M4 female thread, /4-20 UNC male thread). Suitable for machines with M4 spindle. SPV-20 (/4-20 UNC female thread, /4-20 UNC male thread). Suitable for machines with /4-20 UNC spindle, e.g., PW 3/20 H. Safety note : Max. peripherial speed : 50m/s. ia. Shank ia. Max. Speed (rpm) Hard (H) Medium (M) Soft (W) SBH 20 PFZ PF PFZ SBH 25 PFZ PF PFZ SBH 38 PFZ PF PF SBH 50 PFZ PF PF SBH 75 PF00037 PF PF COMBIISC abrasive disc with aluminium oxide A grain are suitable for use on metals and other materials. Grit Size ia. Recom. Speed (rpm) C 20 A PFZ PFZ PFZ00009 PFZ C 25 A PFZ PFZ PFZ PFZ C 38 A PFZ PFZ PFZ PFZ C 50 A PFZ PF PF PF C 75 A PF PFZ PFZ PFZ Aluminium oxide A-Forte types are universally suitable on all metals. High stock removal, cool grinding performance and a long tool life are the hallmarks of this product. Grit Size ia. Recom. Speed (rpm) 36 Forte 60 Forte 80 Forte 20 Forte C 25 A PFZ PFZ00002 PFZ00004 PFZ C 38 A PFZ00000 PFZ00003 PF00078 PF C 50 A PF PF PF PF C 75 A PFZ0000 PF PFZ00005 PF COMBIISC Abrasive discs C Silicon carbide SIC Silicon carbide SIC combidisc disc are ideal for use on aluminium, copper, bronze, titanium, high alloy steel and plastic. Grit Size ia. Recom. Speed (rpm) C 50 A PFZ00007 PFZ00009 PFZ000 PFZ0003 PFZ C 75 A PFZ00008 PFZ0000 PFZ0002 PFZ0004 PFZ ABRASIVE PROUC

23 COMBIISC GRINING OOL COMBIISC Non Woven disc C Hard Unversally suitable for surface conditioning of metal eg. removal of prefinishing marks or light deburing job Grit Size ia. Recom. Speed (rpm) Coarse Medium Very Fine C VRH 20 A PFZ0007 PFZ00022 PFZ C VRH 25 A PFZ0008 PFZ00023 PFZ C VRH 38 A PFZ0009 PFZ00024 PFZ C VRH 50 A PFZ00020 PFZ00025 PFZ C VRH 75 A PFZ0002 PFZ00026 PFZ Available grit types : G = Coarse (colour : yellowish brown) M = Medium (colour : reddish brown) SF = Very fine (colour : blue) COMBIISC COMBIISC Felt disc For face down polishing of medium size surface using polishing paste bars, grinding paste or diamond polishing paste ia. Recom. Speed (rpm) PFZ00032 C FR PFZ00033 C FR iamond Polishing Paste hese pastes are designed for work on very hard materials, e.g. tungsten, carbide and heat-treated steels. Available grit sizes : 30 = coarse 5 = medium 7 = fine 3 = very fine Grit Size Cap Colour Content (gr) PF PP brown 5 PFZ00034 PP brown 20 PFZ00035 PP Blue 5 PFZ00036 PP Blue 20 PF PP Red 5 PFZ00037 PP Red 20 PF PP Green 5 PFZ00038 PP Green 20 Polishing Paste Bar he PFER range comprises five different fasters colour coded by application purpose escription Colour Use for imensions PF PP VP Fe Pre-polish Green Steel - Stainless steel 70x50x40 PFZ00039 PP 2 VP Ms Pre-polish Grey Alum + Brass 70x50x40 PFZ00040 PP 3 VP NE Pre-polish Brown Non ferrous metal 70x50x40 PFZ0004 PP 4 HGP High gloss polish Pink All Metal 70x50x40 PFZ00042 PP 5 HGP K High gloss polish Beige Plastic 70x50x40 Grinding Compound Oil-solube grinding compound with sharp edged SIC grain are ideal for fine polishing operations, e.g. regrinding of valves of shaft bearings, and in preparation of polishing steps with felt tools and cloth rings. Grit Size Content (gr) PF00048 SFP PF SFP PF SFP PF SFP PF00049 SFP PF SFP ABRASIVE PROUC 2

24 POLIROLL AN POLICAP POLIROLL POLIROLL Cartridge Roll Poliroll tools are ideals for grinding in confined areas Fresh grain is exposed in successive layers as the other coated abrasive wears off Very good stock removable performance Special arbor for easy tools replacement Arbors for POLIROLL Grit Size Applications : eburring on bores and in hard to reach places Fillet weld dressing on metal structure Removal off flash on casting ia. x Height mm (x) Recom. rpm Suitable Matching Arbors PF00053 PR x BO PF00072 PR x BO PF PR x BO PF PR x BO PF PR x BO PF PR x BO PF00050 PR x BO PF PR x BO PF00035 PR x BO Shank ia. Suitable for PF00093 BO PR 0625 PF BO PR 0625, PR 0925, PR 225 PF00092 BO PR 0635, PR 0935, PR235 POLIROLL OOL SE Contents : 50 Poliroll Cartridge rolls plus one matching arbor 20pcs each of PR 0625, A 80 and A 50 20pcs each of PR 0925, A 80 and A 50 20pcs each of PR 225, A 80 and A 50 0pcs each of PRK 025, A 80 and A 50 0pcs each of PRK 225, A 80. imension PF00066 PRS 5 80 x 45 x 40 POLICAP POLICAP OOL SE he PFER range comprises an extensive selection of POLICAP abrasive caps and cones. Cap and cone holders are fully reuseable Slots in the holder facilitate its expansion, locking the tool firmly in place. he special manufacturing process guarantees good shapeholding and excellent fine grinding properties Easy tool replacement Applications : Find grinding in tool, die and mouldmaking applications Grinding in hard-to-reach areas and bores Contents - PCS 650 : 320pcs. POLICAP abrasive caps, shape A 320pcs. POLICAP abrasive caps, shape G in five dimensions and three grit sizes. Matching the above: 0pcs. POLICAP abrasive cap holders imension PF PCS x 235 x 50 PF PCS 0A 80 x 45 x 40 PF PCS 00C 80 x 45 x 40 PF PCS 00G 80 x 45 x 40 Contents - PCS 0A: 05pcs. POLICAP abrasive caps, shape A in five dimensions and three grit sizes. Matching the above: 5pcs. POLICAP abrasive cap holders Contents - PCS 0C: 05pcs. POLICAP abrasive caps, shape C in five dimensions and three grit sizes. Matching the above: 5pcs. POLICAP abrasive cap holders Contents - PCS 0G: 05pcs. POLICAP abrasive caps, shape G in five dimensions and three grit sizes. Matching the above: 5pcs. POLICAP abrasive cap holders 22 ABRASIVE PROUC

25 FAN GRINER High flexibility High stock removal due to aggressive coated abrasive Flaps wear off uniformly and without residue on the workpiece surface ensuring adequate availability of sharp grit at all times ue to the special cast core construction, the face of the tool can be worked up very close to the edges and corners Fan Grinder Aluminium Oxide A Applications : Fine grinding of radii in tool, die and mouldmaking applications Grinding small or hard to reach surface in tank and process equipment constructions Finishing work on valves and fittings made of non-ferrous metal or light alloys Grinding of turbine blades in jet engine assembling and maintenance. COAE ABRASIVE OOL Grit Size ABRASIVE PROUC 23 Shank ia. Recom. / Max. Speed (rpm) F 00/3 A PFZ PFZ00063 PFZ00092 PFZ PFZ PFZ PFZ PFZ / F 05/3 A PFZ PFZ00064 PFZ00093 PFZ00022 PFZ PFZ PFZ00030 PFZ / F 505/3 A PFZ PFZ00065 PFZ00094 PFZ PFZ PFZ PFZ0003 PFZ / F 50/3 A PFZ PFZ00066 PFZ00095 PFZ PFZ00025 PFZ00028 PFZ00032 PFZ / F 55/3 A PFZ PFZ00067 PFZ00096 PFZ PFZ PFZ PFZ00033 PFZ / F 200/3 A PFZ PFZ00068 PFZ00097 PFZ PFZ PFZ PFZ00034 PFZ / F 200/6 A PFZ PFZ00069 PFZ00098 PFZ PFZ PFZ PFZ00035 PFZ / F 250/6 A PFZ PFZ00070 PFZ PFZ PFZ PFZ PFZ00036 PFZ / F255/6 A PFZ00039 PFZ0007 PFZ PFZ PFZ PFZ PFZ00037 PFZ / F2520/6 A PFZ PFZ00072 PFZ00020 PFZ PFZ PFZ PFZ00038 PFZ / F 2525/6 A PFZ0004 PFZ00073 PF PFZ PFZ PFZ PFZ00039 PFZ / F3005/3 A PFZ00042 PFZ00074 PFZ PFZ00023 PFZ PFZ PFZ PFZ / F3005/6 A PFZ00043 PFZ00075 PFZ PFZ PFZ PFZ PFZ00032 PFZ / F 300/3 A PFZ00044 PFZ00076 PFZ PFZ PFZ PFZ00029 PFZ PFZ / F 300/6 A PF PF PF PF PFZ00026 PF00033 PFZ PF / F 305/6 A PFZ00045 PF PF PF PF PF PFZ PFZ / F 3030/6 A PFZ00046 PFZ00077 PFZ PFZ PFZ PFZ PFZ PFZ / F 400/6 A PFZ00047 PFZ00078 PFZ PFZ PFZ PFZ PFZ PFZ / F 405/6 A PFZ00048 PFZ00079 PFZ PFZ PFZ PFZ PFZ PFZ / F 4020/6 A PFZ00049 PF PF PF PF PF PFZ PFZ / F 500/6 A PFZ00050 PFZ00080 PFZ PFZ PFZ PFZ PFZ PFZ / F 505/6 A PFZ0005 PF PF PF PFZ PF PF PFZ / F 5020/6 A PFZ00052 PFZ0008 PFZ PFZ PFZ PFZ PFZ00033 PFZ / F 5030/6 A PFZ00053 PFZ00082 PFZ00020 PFZ PFZ PFZ PFZ PFZ / F 605/6 A PFZ00054 PFZ00083 PFZ0002 PFZ PFZ PFZ PFZ PFZ / F 6020/6 A PFZ00055 PFZ00084 PFZ00022 PFZ00024 PFZ PFZ PFZ PFZ / F 6030/6 A PFZ00056 PFZ00085 PFZ00023 PFZ PFZ00027 PFZ PFZ PFZ / F 6040/6 A PF PF PF PF PFZ PF PF PFZ / F 6050/6 A PFZ00057 PFZ00086 PFZ00024 PFZ PFZ PFZ00030 PFZ PFZ / F 805/6 A PFZ00058 PFZ00087 PFZ00025 PFZ PFZ PFZ PFZ PFZ / F 8020/6 A PFZ00059 PFZ00088 PFZ00026 PFZ PFZ PFZ PFZ PFZ / F 8030/6 A PFZ00060 PFZ00089 PFZ00027 PFZ PFZ PFZ PFZ PFZ / F 8040/6 A PFZ0006 PFZ00090 PFZ00028 PFZ PFZ PFZ PFZ PFZ / F 8050/6 A PFZ00062 PFZ0009 PFZ00029 PFZ PFZ PFZ PFZ00034 PFZ /

26 POLINOX COAE ABRASIVE OOL POLINOX Mounted Point PNL POLINOX Mounted Point PNZ No heat build-up during grinding Extensive and diverse range of dimensions, grit sizes and tool types Applications : Matt and satin-finishing of metal Non-ferrous metal depolishing Cleaning of oxidized non ferrous metal Continuous matt finishing of stainless steel (without visible transitions) Surface roughening of plastic in preparation of adhesive bonding Available Grit Size A=Aluminium Oxide Shank ia. Recom. /Max. Speed (rpm) PNL 4020/6 A PF PF00044 PF / PNL 5030/6 A PFZ PFZ PFZ / PNL 6050/6 A PFZ PFZ PFZ / PNL 8050/6 A PFZ PFZ PFZ / he non woven abrasive is arranged in a plurally of radial elements with abrasive cloth interlayers. his structure permits an improved stock removal and produces a coarser finish. POLICLEAN Mounted ool For general purpose periperal grinding. Available Grit Size A=Aluminium Oxide Shank ia. Recom. /Max. Speed (rpm) PNZ 4020/6 A PF PF / PNZ 6050/6 A PF PF / PNZ 8050/6 A PF PFZ / PNZ 0050/6 A PFZ PFZ / POLICLEAN Mounted ool Shank ia. Recom. Speed (rpm) PF PCLYZ 503/ PFZ PCLYZ 5026/ PFZ PCLYZ 7526/ he non woven cleaning fabric is supported by abacking pad. his design allows POLICLEAN isc to be used very effective in face grinding. Recommended periperal speed 30-35m/s POLIVLIES isc Width Center Hole ia. Recom. Speed (rpm) PF PCL PF PCL For flexible periperal grinding of difficult workpiece contours. Application Examples: eburing of ribs and deep fins Cleaning of cylinder Heads Fine grinding on radiator type heat exchangers. Arbor for POLIVLIES isc Grit Size ia. x Width Center Hole Recom / Max. Suitable Medium Very Fine Speed (rpm) Arbor PVR A PFZ PFZ x / 4000 PVR 6/ Ordering Note : Please order arbor separately Shank ia. Shank Suitable for Center Hole Clamping Width PVR 6/3-25 PFZ ABRASIVE PROUC

27 UNIVERSAL LINE PSF, PERFORMANCE SG he PFER range of reinforce grinding wheels meets state-of-theart requirements, providing outstanding stock removal, handling convenience, and high cost-efficiency UNIVERSAL LINE PSF Steel/Cast Iron/Stainless Steel (INOX) Benefits : Universal Line PSF for general-purpose use in industry, crafts and IY use Performance Line SG Broadest range for professional use in industry and crafts Special/High-Performance Line SGP esigned for special industrial applications Medium grade (L) for use on high-grade steel and other metals, fast stock removal and long service life. For general purpose use. Manufactured without addition of ferrous, sulphurous chlorinated fillers. imension [mm (Inch)] Max. Speed (rpm) PF E00-6A24 L PS-F 00 x 6.3 x 6.0 (5/8 ) PF00020 E78-7A24 L PS-F 78 x 7.2 x (7/8 ) PF E230-7A24 L PS-F 230 x 7.2 x (7/8 ) REINFORCE GRINING WHEEL Steel Very soft type (K) for use on steel and other metals. Very fast stock removal and long service life. Particularly aggressive abrasive action. imension [mm (Inch)] Max. Speed (rpm) PF E78-7A30 K PS-F 78 x 6.3 x (7/8 ) Steel/Cast Iron General purpose tool of hardness grade P use on steel/cast iron. Very fast stock removal and long service life Particularly aggressive abrasive action. imension [mm (Inch)] Max. Speed (rpm) PF E78-7A30 P PS-F 78 x 6.3 x (7/8 ) Stainless Steel Medium grade (M) for use on high-grade steel and difficult to grid materials, fast stock removal and long service life. Manufactured without addition of ferrous, sulphurous chlorinated fillers. imension [mm (Inch)] Max. Speed (rpm) PF E00-6A30 M PSF INOX 00 x 6.3 x 6.0 (5/8 ) PF E78-7A30 M PSF INOX 78 x 7.2 x (7/8 ) PF E230-7A30 M PSF INOX 230 x 7.2 x (7/8 ) PERFORMANCE SG Steel Professional tool of hardness grade R for use in high pressure applications. By aggressive abrasive performance and very long tool life. Provide out standing shape stability in pipeline applications (weld finishing, edge grinding, root pass grinding). imension [mm (Inch)] Max. Speed (rpm) PF E78-7A24 RSG 78 x 7.2 x (7/8 ) ABRASIVE PROUC 25

28 REINFORCE GRINING WHEEL Casting Scale Hard- Hardness Grade S GRINING WHEEL Proffesional tool of hardness grade S. PFER product characterized by aggressive grinding performance and very long tool life Abrasive : Aluminium oxide/silicon carbide AC Workpiece materials : Casting scale, flake graphite cast iron, nodular cast iron, hard aluminium Application : Surface grinding, work on weld seams, chamfering, deburring Recommendation for use : esigned preferably for use on high-power angnle grinders. Provides optimum grinding results on pneumatic turbine grinders and powerful high frequency or electric angle grinders EAN EN-esignation xuxh (mm(inch)) Max. Speed (rpm) kg E 78-7 AC 30 S SG/22, AC 30 S BF 80 78x7,2x22x23 (7/8) 8, ,400 E AC 30 S SG/22, AC 30 S BF x7,2x22x23 (7/8) 6, ,900 Casting Scale Hard- Hardness Grade S Proffesional tool of hardness grade Q. PFER product characterized by aggressive grinding performance and very long tool life Abrasive : Silicon carbide AC Workpiece material : Cast iron/casting scale, stone, hard aluminium Application : Surface grinding chamfering, deburring Recommendation for use : esigned preferably for use on high-power angnle grinders. Provides optimum grinding results on pneumatic turbine grinders and powerful high frequency or electric angle grinders EAN EN-esignation xuxh (mm(inch)) Max. Speed (rpm) kg E 5-7 C 24 Q SG/22, C 24 Q BF 80 5x7,2x22,23 (7/8) ,840` E 25-7 C 24 Q SG/22, C 24 Q BF 80 25x7,2x22,23 (7/8) ,250 E 78-7 C 24 Q SG/22, C 24 Q BF 80 78x7,2x22,23 (7/8) ,300 E C 24 Q SG/22, C 24 Q BF x7,2x22,23 (7/8) ,00 More Productivity in industry and handycrafts 26 ABRASIVE PROUC

29 SPECIAL/HIGH PERFORMANCE SGP Steel Stone (Cup Wheels) Special-purpose tool of hardness grade R. For professional work meeting the highest standard. By aggressive grinding performance and outstanding to life (weld finishing and edge grinding). Preferably for use on high power pneumatic and electric angle grinder. imension [mm (Inch)] Max. Speed (rpm) PF E78-7A24 RSGP 78 x 7.2 x (7/8 ) REINFORCE GRINING WHEEL AN CU- OFF WHEEL General purpose tool of hardness grade Q for wet and dry grinding Bore Bore ia. Max. ia. Min. ia. Cup Height Wall hickness Max. speed rpm PF E 80-8 C 80 Q SG PF E 0-20 C 30 Q SG CU-OFF WHEELS PS-FORE Steel EH EH General purpose tool of hardness grade P. PFER product characterized by aggressive abrasive performance and long tool life. Abrasive : Aluminium oxide A Workpiece Materials : Steel Application : Cutting of steel metal, sections and solid materials Recommendation for use : isc thickness,9/,6/,0mm for fast, convenient cutting with minimized burr formation. isc thickness 2,4mm for general cutting applications. his thickness 3,2/3,0mm for maximum tool life with high lateral stability. Suitable for angle grinders of all output levels imension x B x 2 [mm(inch)] Max. Speed rpm PF00034 EH 00-2,4A 46 P PS-FORE 00 x 2.4 x 6.0 (5/8 ) PF EH 00-2,4A 46 P PS-FORE 00 x 2.4 x 6.0 (5/8 ) PF00064 EH 00-3,2A 46 P PS-FORE 00 x 3.2 x 6.0 (5/8 ) PF EH 78-3,0A 24 P PS-FORE 78 x 3.0 x 22.2 (7/8 ) ABRASIVE PROUC 27

30 CU-OFF WHEEL CU-OFF WHEEL LINE SG, ARBOR Steel/Stainless steel (INOX)/Cast Iron/Non Ferrous metals CU-OFF WHEEL PERFORMANCE LINE SG PERFORMANCE LINE SG Start from 30-76mm Only use for steel / stainless steel and non ferrous : EH Application for cutting of sheet metal, sections, and solid material. imension x B x 2 [mm(inch)] Max. Speed rpm PF00053 EH 30-. A 60 P SG 30 x. x 6.0 (/4 ) PFZ00040 EH A 60 P SG 30 x.4 x 6.0 (/4 ) PF EH 40-. A 60 P SG 40 x. x 6.0 (/4 ) PFZ EH A 60 P SG 40 x 2. x 6.0 (/4 ) PFZ EH 50-. A 60 P SG 50 x. x 6.0 (/4 ) PFZ00044 EH A 60 P SG 50 x.4 x 6.0 (/4 ) PF EH A 46 P SG 50 x 2. x 6.0 (/4 ) PF00000 EH A 46 P SG 50 x 3.0 x 6.0 (/4 ) PFZ EH 65-. A 60 P SG 65 x.4 x 6.0 (/4 ) PFZ EH 65-. A 60 P SG 65 x.4 x 0.0 (25/64 ) PFZ EH A 60 P SG 65 x.4 x 0.0 (25/64 ) PFZ EH A 46 P SG 65 x 2. x 0.0 (25/64 ) PFZ EH 70-. A 60 P SG 70 x. x 0.0 (25/64 ) PFZ EH A 60 P SG 70 x.4 x 0.0 (25/64 ) PFZ EH A 60 P SG 70 x 2. x 0.0 (25/64 ) PFZ EH A 60 P SG 70 x 3.0 x 0.0 (25/64 ) PFZ EH 76-. A 60 P SG 76 x. x 6.0 (/4 ) PFZ0004 EH 76-. A 60 P SG 76 x. x 0.0 (25/64 ) PFZ00042 EH A 60 P SG 76 x.4 x 0.0 (25/64 ) PFZ00043 EH A 46 P SG 76 x 2. x 0.0 (25/64 ) PFZ00044 EH A 46 P SG 76 x 3.0 x 0.0 (25/64 ) Multipurpose tool of hardness grade R-INOX for reduced heat build-up. Suitable for use with angle grinders of all output levels. Benefits : Multipurpose tool of hardness grade P for cutting with reduced heat built-up with straight-type grinders Aggresive abrasive performance Application Cutting of sheet metal, sections, and solid material Abrasive : Aluminium oxide Manufactured without addition of ferrous, sulphurous or chlorinated filters. Workpiece material Steel, stainless steel (INOX), high temperature resistant steels, cast iron, non-ferrous metals. Ordering note Please specify centre hole diameter when ordering. Please order arbors separately Arbor for small cut-off wheel Accessories for mounting small cut-off wheels on straight grinders Shank ia. ool Center ia. Clamping Width PF BO 6/ PFZ00045 BO 6.35/6 0-4 (¼ ) PF BO 6/ PFZ00046 BO 6.35/0 0-4 (¼ ) PFZ00047 BO 8/ Benefits : hin cut-off wheels (.0mm) provide fast and convinient cutting while minimizing burr formation Aggressive cutting performance and very long tool life Stainless Steel (INOX) Aluminium / Non Ferrous Metal EH Abrasive: Aluminium oxide Manufactured without addition of ferrous, sulphurous or chlorinated fillers Workpiece material Stainless steel (INOX) Application Cutting sheet metal, sections and solid material EH Abrasive: Aluminium oxide Contains no fillers which might leave and undesirable surface residue. he workpiece can be welded right away, without any further threatment. Workpiece materials ough and hard aluminium, non ferrous metal Application Cutting sheet metal, sections and solid material imension [mm (Inch)] Max. Speed (rpm) Stainless Steel (INOX) PF EH A 60 RSG-INOX 00 x.0 x 6.0 (5/8 ) PF00085 EH A 60 RSG-INOX 25 x.0 x (7/8 ) Aluminium / Non Ferrous Metal PF EH A 24 NSG ALU 78 x 2.9 x (7/8 ) PF EH A 24 NSG ALU 230 x 2.9 x (7/8 ) ABRASIVE PROUC

31 CU-OFF WHEEL INOX Medium-Hard -Hardness Grade P (INOX) Multipurpose tool of hardness grade P-INOX, for reduced heat build-up. PFER product for cutting with low heat input. Provides fast stock removal and long tool life. Abrasive : Aluminium oxide A Manufactured without addition of ferrous, sulphurous and chlorinated fillers Workpiece materials : Stainless steel (INOX) Application : Cutting of steel metal, sectional and solid materials Recommendation for use : isc thickness,9/,8/,6/,2/,0mm for fast, convenient cutting with minimized burr formation. isc thickness 2,5/2,4mm for universal cutting work. isc thickness 3,2mm for maximum tool life and high lateral stability Suitable for angle grinders of all output levels. CU-OFF WHEEL EAN EN-esignation x/uxh (mm(inch)) Max.Speed (rpm) epressed Centre EH 00-3,2 A 46 P PSF-INOX/ S A 46 P BF 80 00x3,2x6,0 (5/8) ,450 EH 5-3,2 A 46 P PSF-INOX/ S A 46 P BF 80 5x3,2x22,23 (5/8) ,875 EH 25-3,2 A 46 P PSF-INOX/ S A 46 P BF 80 25x3,2x22,23 (7/8) ,250 EH 78-2,5 A 24 P PSF-INOX/ S A 24 P BF 80 78x2,5x22,23 (7/8) ,500 EH 230-2,5 A 24 P PSF-INOX/ S A 24 P BF x2,5x22,23 (7/8) ,750 Flat EH EH 5-,0 A 60 P PSF-INOX/ A 60 P BF 80 5x,0x22,23 (7/8) ,625 EH 5-,2 A 60 P PSF-INOX/ A 60 P BF 80 5x,2x22,23 (7/8) ,775 EH 5-,6 A 46 P PSF-INOX/ A 46 P BF 80 5x,6x22,23 (7/8) ,000 EH 5-,8 A 46 P PSF-INOX/ A 46 P BF 80 5x,8x22,23 (7/8) ,220 EH 5-2,4 A 46 P PSF-INOX/ A 46 P BF 80 5x2,4x22,23 (7/8) ,475 EH 25-,0 A 60 P PSF-INOX/ A 60 P BF 80 25x,0x22,23 (7/8) ,750 EH 25-,2 A 60 P PSF-INOX/ A 60 P BF 80 25x,2x22,23 (7/8) ,900 EH 25-,6 A 46 P PSF-INOX/ A 46 P BF 80 25x,6x22,23 (7/8) ,75 EH 25-,8 A 46 P PSF-INOX/ A 46 P BF 80 25x,8x22,23 (7/8) ,395 EH 25-2,4 A 46 P PSF-INOX/ A 46 P BF 80 25x2,4x22,23 (7/8) ,625 EH 50-,6 A 46 P PSF-INOX/ A 46 P BF 80 50x,6x22,23 (7/8) ,725 EH 78-,6 A 46 P PSF-INOX/ A 46 P BF 80 78x,6x22,23 (7/8) ,325 EH 78-2,5 A 24 P PSF-INOX/ A 24 P BF 80 78x2,5x22,23 (7/8) ,200 EH 230-,9 A 46 P PSF-INOX/ A 46 P BF x,9x22,23 (7/8) ,625 EH 230-2,5 A 24 P PSF-INOX/ A 24 P BF x2,5x22,23 (7/8) ,750 Stone/Aluminium/ non-ferrous metal Medium-Hard -Hardness Grade P kg Multipurpose tool of hardness grade P for cutting solid material. PFER product characterized by aggressive cutting action and long tool life Abrasive : Silicon Carbide C Workpiece materials : Natural stone, synthetic stone, fire-resistant stone, aluminium, non-ferrous metals. Application : Cutting of solid material Recommendation for use : isc thickness,6/,0mm for fast, convenient cutting with minimized burr formation. isc thickness 2,4mm for universal cutting work. isc thickness 3,2/3,0mm for maximum tool life with high lateral stability. Suitable for angle grinders of all output levels. EAN EN-esignation x/uxh (mm(inch)) Max.Speed (rpm) epressed Centre EH 00-2,4 C 30 P PSF-/ S C 46 P BF 80 00x2,4x6,0 (5/8) ,875 EH 5-2,4 C 30 P PSF-/ S C 46 P BF 80 5x2,4x22,23 (7/8) ,50 EH 25-2,4 C 30 P PSF-/ S C 46 P BF 80 25x2,4x22,23 (7/8) ,375 EH 50-3,0 C 24 P PSF-/ S C 24 P BF 80 50x3,0x22,23 (7/8) ,500 EH 78-3,2 C 24 P PSF-/ S C 24 P BF 80 78x3,2x22,23 (7/8) ,500 EH 230-3,2 C 24 P PSF-/ S C 24 P BF x3,2x22,23 (7/8) ,875 Flat EH EH 5-,0 C 60 P PSF-/ C 60 P BF 80 5x,0x22,23 (7/8) ,625 EH 5-,6 C 60 P PSF-/ C 46 P BF 80 5x,6x22,23 (7/8) ,00 EH 25-,0 C 46 P PSF-/ C 60 P BF 80 25x,0x22,23 (7/8) ,850 EH 25-,6 C 46 P PSF-/ C 46 P BF 80 25x,6x22,23 (7/8) ,75 EH 78-3,2C 24 P PSF-/ C 24 P BF 80 78x3,2x22,23 (7/8) ,500 EH 230-3,2C 24 P PSF-/ C 24 P BF x3,2x22,23 (7/8) ,875 kg ABRASIVE PROUC 29

32 CU-OFF WHEEL Performance Line SG-ELASIC Steel Hard yoe-hardness Grade S CU-OFF WHEEL Performance tool in hardness grade S. PFER product with high cutting capabilities and excellent tool life. Abrasive : Aluminium Oxide A Application : Cutting of metal, sheet profiles and solid materials Workpiece materials : Steel Recommendation for use : isc thickness,9/,6/,0mm for fast, convenient with minimized burr formation. isc thickness 2,4mm for universall cutting work. isc thickness 3,2/3,0/2,9mm for maximum tool life with high lateral stability. Suitable for angle grinders of all outputy levels. EAN EN-esignation x/uxh (mm(inch)) Max.Speed (rpm) kg epressed Centre EH 00-2,4 A 46 S SG/ A 46 S BF 80 00x2,4x6,0 (5/8) ,75 EH 5-2,4 A 30 S SG/ A 30 S BF 80 5x2,4x22,23 (7/8) ,575 EH 5-3,2 A 30 S SG/ A 30 S BF 80 5x3,2x22,23 (7/8) ,900 EH 25-2,4 A 30 S SG/ A 30 S BF 80 25x2,4x22,23 (7/8) ,850 EH 25-3,2 A 30 S SG/ A 30 S BF 80 25x3,2x22,23 (7/8) ,25 EH 50-3,0 A 24 S SG/ A 24 S BF 80 50x3,0x22,23 (7/8) ,050 EH 78-2,9 A 24 S SG/ A 24 S BF 80 78x2,9x22,23 (7/8) ,000 EH 78-3,2 A 24 S SG/ A 24 S BF 80 78x3,2x22,23 (7/8) ,375 EH 230-2,9 A 24 S SG/ A 24 S BF x2,9x22,23 (7/8) ,625 EH 230-3,2 A 24 S SG/ A 24 S BF x3,2x22,23 (7/8) ,25 Flat EH EH 00-2,4 A 46 S SG/6, A 46 S BF 80 00x2,4x6,0 (5/8) ,025 EH 5-,0 A 60 S SG/22, A 60 S BF 80 5x,0x22,23 (7/8) ,625 EH 5-,6 A 46 S SG/22, A 46 S BF 80 5x,6x22,23 (7/8) ,50 EH 5-2,4 A 30 S SG/22, A 30 S BF 80 5x2,4x22,23 (7/8) ,575 EH 25-,0 A 60 S SG/22, A 60 S BF 80 25x,0x22,23 (7/8) ,750 EH 25-,6 A 46 S SG/22, A 46 S BF 80 25x,6x22,23 (7/8) ,75 EH 25-2,4 A 30 S SG/22, A 30 S BF 80 25x2,4x22,23 (7/8) ,850 EH 50-3,0 A 24 S SG/22, A 24 S BF 80 50x3,0x22,23 (7/8) ,050 EH 78-,6 A 46 S SG/22, A 46 S BF 80 78x,6x22,23 (7/8) ,325 EH 78-2,9 A 24 S SG/22, A 24 S BF 80 78x2,9x22,23 (7/8) ,000 EH 78-3,2 A 24 S SG/22, A 24 S BF 80 78x3,2x22,23 (7/8) ,375 EH 230-,9 A 46 S SG/22, A 46 S BF x.9x22,23 (7/8) ,625 EH 230-2,9 A 24 S SG/22, A 24 S BF x2,9x22,23 (7/8) ,625 EH 230-3,2 A 24 S SG/22, A 24 S BF x3,2x22,23 (7/8) ,300 INOX Hard - Hardness Grade R Abrasive : Aluminium Oxide A Manufactured without addition of ferrous, sulphurous and chlorinated fillers. Application : Cutting of metal, sheet profiles and solid materials Multipurpose tool of hardness grade R-INOX, for reduce heat build-up. PFER product charcterized by aggressive cutting performance and very long tool life Workpiece materials : Stainless Steel (INOX) Recommendation for use : isc thickness,9/,8/,6/,2/,0mm for fast, convenient with minimized burr formation. isc thickness 2,5/2,4/2,0mm for universall cutting work. isc thickness 3,2mm for maximum tool life with high lateral stability. EAN EN-esignation x/uxh (mm(inch)) Max.Speed (rpm) epressed Centre EH 5-2,4 A 46 R SG-INOX/22, A 46 R BF 80 5x2,4x22,23 (7/8) ,575 EH 5-3,2 A 46 R SG-INOX/22, A 46 R BF 80 5x3,2x22,23 (7/8) ,950 EH 25-2,4 A 46 R SG-INOX/22, A 46 R BF 80 25x2,4x22,23 (7/8) ,850 EH 25-3,2 A 46 R SG-INOX/22, A 46 R BF 80 25x3,2x22,23 (7/8) ,200 EH 78-2,5 A 24 R SG-INOX/22, A 24 R BF 80 78x2,5x22,23 (7/8) ,200 EH 230-2,5 A 46 R SG-INOX/22, A 24 R BF x2,5x22,23 (7/8) ,000 Flat EH EH 00-,0 A 60 R SG-INOX/6, A 60 R BF 80 00x,0x6,0 (5/8) ,550 EH 5-,0 A 60 R SG-INOX/22, A 60 R BF 80 5x,0x22,23 (7/8) ,625 EH 5-,2 A 60 R SG-INOX/22, A 60 R BF 80 5x,2x22,23 (7/8) ,775 EH 5-,6 A 46 R SG-INOX/22, A 46 R BF 80 5x,6x22,23 (7/8) ,00 EH 5-,8 A 46 R SG-INOX/22, A 46 R BF 80 5x,8x22,23 (7/8) ,220 EH 5-2,4 A 46 R SG-INOX/22, A 60 R BF 80 5x2,4x22,23 (7/8) ,575 kg *See the next detail at the next page 30 ABRASIVE PROUC

33 CU-OFF WHEEL INOX Hard - Hardness Grade R EAN EN-esignation x/uxh (mm(inch)) Max.Speed (rpm) EH 25-,0 A 60 R SG-INOX/22, A 60 R BF 80 25x,0x22,23 (7/8) ,750 EH 25-,2 A 60 R SG-INOX/22, A 46 R BF 80 25x,2x22,23 (7/8) ,900 EH 25-,6 A 46 R SG-INOX/22, A 46 R BF 80 25x,6x22,23 (7/8) ,225 EH 25-,8 A 46 R SG-INOX/22, A 46 R BF 80 25x,8x22,23 (7/8) ,395 EH 25-2,4 A 46 R SG-INOX/22, A 46 R BF 80 25x2,4x22,23 (7/8) ,850 EH 50-,6 A 46 R SG-INOX/22, A 46 R BF 80 50x,6x22,23 (7/8) ,725 EH 78-,6 A 46 R SG-INOX/22, A 46 R BF 80 78x,6x22,23 (7/8) ,325 EH 78-,8 A 46 R SG-INOX/22, A 46 R BF 80 78x,8x22,23 (7/8) ,500 EH 78-2,5 A 24 R SG-INOX/22, A 46 R BF 80 78x2,5x22,23 (7/8) ,300 EH 230-,9 A 46 R SG-INOX/22, A 46 R BF x,9x22,23 (7/8) ,050 EH 230-2,0 A 46 R SG-INOX/22, A 46 R BF x2,0x22,23 (7/8) ,625 EH 230-2,5 A 24 R SG-INOX/22, A 24 R BF x2,5x22,23 (7/8) ,000 EH 230-3,2 A 24 R SG-INOX/22, A 24 R BF x3,2x22,23 (7/8) ,50 kg CU-OFF WHEEL FOR SAIONARY MACHINE CU-OFF WHEEL FOR SAIONARY MACHINE CHOPSAW For cutting sections (steel and solid materials) on field-use machines with a max. power output up to 3 KW Stainless Steel (INOX) Steel Multipurpose tool of hardness grade K for abrasive cutting. Characterized by aggressive, cool cutting performance for fast results and very long tool life. Chopsaw < 3KW Abrasive: Aluminium oxide Manufactured without addition of ferrous, sulphurous or chlorinated fillers Workpiece materials Stainless steel (INOX) Application Cutting of sections and solid material Recommendation for use Provides excellent cutting result on machines with up to 3KW ouput imension [mm (Inch)] Max. Speed (rpm) PF A 36 K SG-CHOP-INOX 400 x 2.8 x 25.4 ( ) Multipurpose tool of hardness grade K for abrasive cutting operations using stationary machines. Characterized by aggressive, cool cutting performance for fast results and very long to life. Abrasive: Aluminium oxide Workpiece materials Steel Application Cutting of sections and solid material Recommendation for use Provides excellent cutting result on machines with up to 3KW ouput imension [mm (Inch)] Max. Speed (rpm) PF A 36 K SG-CHOP 350 x 2.8 x 25.4 ( ) PF A 36 K SG-CHOP 400 x 3.8 x 25.4 ( ) Your # source for... Safety Equipment Section 9 ABRASIVE PROUC 3

34 POLIFAN FLAP ISC PERFORMANCE LINE SG POLIFAN FLAP ISC POLIFAN Flap isc can offer advantages over reinforce grinding wheel where a superior surface finish must be achieved in addition to high stock removal rates. SG-A Metal/Platic/Wood Benefits : High grinding efficiency and excellent surface finish combine in a single grinding operation Extremely long service life Silent operation, soft, cool cutting properties Reduce operator fatigue Low Vibration Versatile tool for general professional use. Suitable for angle grinder of all output categories. Characterized by aggressive grinding action and outstanding to life. Recommendation for use Achieved very high stock removall rates even at low contact pressure. Abrasive: Aluminium oxide Grit sizes: 40, 60, 80, 20 Workpiece materials Metals, plastics, wood Application Surface grinding, edge grinding Grit Size imension [mm (Inch)] Max. Speed (rpm) PF PFF 00 A 40 SG x 5 x 6.0 (5/8 ) PF PFF 00 A 60 SG x 5 x 6.0 (5/8 ) PF PFF 00 A 80 SG x 4 x 6.0 (5/8 ) PF00065 PFF 00 A 20 SG x 3 x 6.0 (5/8 ) SGP - ZIRCON -SPECIAL Steel/Stainless Steel (INOX) Special purpose tool for demanding surface grinding tasks. Characterized by aggressive grinding action and long tool life Abrasive: Zirconia alumina Grit sizes: 24, 40, 60, 80 Workpiece materials Steel, Stainless steel (INOX) Application Surface grinding, Weld dressing, edge finishing Recommendation for use he use of zirconia alumina a high performance abrasive grain, in conjunction with the dense flap structure require a high output angle grinder to achieve optimum grinding result. Grit Size imension [mm (Inch)] Max. Speed (rpm) PF00066 PFF 00 Z 40 SGP-SPECIAL x 5 x 6.0 (5/8 ) PF PFF 00 Z 60 SGP-SPECIAL x 4 x 6.0 (5/8 ) Grinding and Cut-off Wheels hree steps to select the correct tool â Material ê Power tool ô Application/task û ool In order to ensure the most cost-efficient use of grinding and cut off wheels for hard-held power tools, it is necessary to select the right tool for the individual application. In our application recommendations for grinding and cut-off wheels we have taken in to account the power output (watts) of the most common angle grinders in relation to the material and machining task at hand. his distinction is reflected in the following table. 32 ABRASIVE PROUC

35 POLIFAN FLAP ISC Steel/INOX/Plastic PSF A Versatile tool for multi-purpose grinding tasks. PFER product characterized by aggressive grinding performance and long tool life. Optimizes inventory management due to its suitability for many metarials. Abrasive : Aluminium oxide A Workpiece materials : Grit sizes : 40, 60, 80, 20 Steel, stainless steel (INOX), plastic Application : Surface ginding, work on weld seams EAN Grit Size xxh (mm(inch)) Max.Speed (rpm) Recommendation for use : Achieves very good grinding results even at low contact pressure. Suitable for angle grinders of all output categories Flat PFF PFF 5 A 40 PSF/22, x6x22,23 (7/8) ,990 PFF 5 A 60 PSF/22, x5x22,23 (7/8) ,880 PFF 5 A 80 PSF/22, x5x22,23 (7/8) ,770 PFF 5 A 20 PSF/22, x3x22,23 (7/8) ,750 PFF 25 A 40 PSF/22, x6x22,23 (7/8) ,080 PFF 25 A 60 PSF/22, x5x22,23 (7/8) ,000 PFF 25 A 80 PSF/22, x3x22,23 (7/8) ,870 PFF 25 A 20 PSF/22, x3x22,23 (7/8) ,840 PFF 80 A 40 PSF/22, x6x22,23 (7.8) ,660 Conical PFC PFC 5 A 40 PSF/22, x5x22,23 (7/8) ,950 PFC 5 A 60 PSF/22, x4x22,23 (7/8) ,870 PFC 5 A 80 PSF/22, x4x22,23 (7/8) ,780 PFC 5 A 20 PSF/22, x2x22,23 (7/8) ,730 PFC 25 A 40 PSF/22, x5x22,23 (7/8) ,060 PFC 25 A 60 PSF/22, x4x22,23 (7/8) ,00 PFC 25 A 80 PSF/22, x4x22,23 (7/8) ,900 PFC 25 A 20 PSF/22, x2x22,23 (7/8) ,860 PFC 80 A 40 PSF/22, x5x22,23 (7/8) ,540 PFC 80 A 60 PSF/22, x4x22,23 (7.8) ,440 kg POLIFAN FLAP ISC Steel / INOX / PSF ZIRKON ool for demanding general-purpose applications. PFER product chracterized by aggressive grinding and long service life, particularly when used for edge grinding. Abrasive : Zirconia alumina Z Grit sizes : 40, 60, 80 Application : Surface ginding, work on weld seams Workpiece materials : Steel, stainless steel (INOX) Recommendation for use : Optimum stock removal rates are achieved with high-powered angle grinders used at higher application pressures EAN Grit Size xxh (mm(inch)) Max.Speed (rpm) Flat PFF PFF 5 Z 40 PSF/22, x5x22,23 (7/8) ,850 PFF 5 Z 60 PSF/22, x4x22,23 (7/8) ,800 PFF 5 Z 80 PSF/22, x4x22,23 (7/8) ,780 PFF 25 Z 40 PSF/22, x5x22,23 (7/8) ,000 PFF 25 Z 60 PSF/22, x4x22,23 (7/8) ,920 PFF 25 Z 80 PSF/22, x4x22,23 (7/8) ,900 PFF 80 Z 40 PSF/22, x5x22,23 (7/8) ,400 PFF 80 Z 60 PSF/22, x5x22,23 (7/8) ,230 Conical PFC PFC 5 Z 40 PSF/22, x4x22,23 (7/8) ,850 PFC 5 Z 60 PSF/22, x4x22,23 (7/8) ,800 PFC 5 Z 80 PSF/22, x4x22,23 (7/8) ,760 PFC 25 Z 40 PSF/22, x4x22,23 (7/8) ,000 PFC 25 Z 60 PSF/22, x4x22,23 (7/8) ,950 PFC 25 Z 80 PSF/22, x4x22,23 (7/8) ,890 PFC 50 Z 40 PSF/22, x4x22,23 (7/8) ,750 PFC 50 Z 60 PSF/22, x4x22,23 (7/8) ,700 PFC 80 Z 40 PSF/22, x4x22,23 (7/8) ,300 PFC 80 Z 60 PSF/22, x4x22,23 (7.8) ,260 kg ABRASIVE PROUC 33

36 INUSRIAL BRUSH BRUSHING Long tool life, due to high quality wire of high flexibility and flexural strength High concentricity, due to even distributed and securely attached of fill wires Optimum finishing result, due to close matching of brush body and visible trim length Good value for money MOUNE BRUSH Wire Brush - Crimped Steel Wire Benefits : eburring, especially removal of secondary burrs produced by milling, grinding, turning or drilling Surface Cleaning - Removal of rust or scale - Cleaning, removal of paint coatings, etc. - Weld conditioning Surface Finishing - Matt finishing, burnishing - Roughening, texturing - Grinding (SiC filament brushes) Wire Size Brush ia. rim Width rim Shank ia. Recom. Speed (rpm) PF RBU PF RBU PF RBU PF RBU PFZ00033 RBU PFZ00034 RBU PF RBU PF RBU PFZ00035 RBU Ordering note : We are available in Stainless steel wire, brass wire, plastic (SIC). Wire Brush - Knotted Steel Wire ia. x Width Shank ia. rim Wire Size Wire Recom. Speed (rpm) PF RBG x steel PFZ00036 RGB x steel PFZ00037 RGB x steel PFZ00038 RGB x steel PFZ00039 RGB x steel Ordering note : We are available in Stainless steel wire. Wire End Brush - Crimped Steel Wire Mounted Cup Brushes - Crimped Steel Wire Wire Size Brush ia. otal rim Shank ia. Recom. Speed (rpm) PF00005 PBU PFZ PBU PFZ00032 PBU PF PBU PFZ PBU PF PBU PFZ PBU PF PBU Ordering note : We are available in Stainless steel wire, brass wire, plastic (SIC). Wire Size Brush ia. otal rim Width rim Shank ia. Recom. Speed (rpm) PF BU PFZ BU Ordering note : We are available in Stainless steel wire, plastic (SIC). Safety Recommendations Never exeed the stated maximum rpm levels! Wear safety glasses and safety clothing! Read the instructions! Use machine guard or safety hoods! 34 ABRASIVE PROUC

37 WHEEL BRUSH Wire Wheel Brushes - Crimped Steel Wire Adaptor pairs AM 5 Excellent for medium duty brushing (hand held or stationary), of large surface areas. RBU = Wheel brush, individual filament type. Recommendation for use Suitable drive systems: bench grinder, stationary machines, flexible shafts. ool contact pressure should be kept low. Ensure that workpiece contact is made by wire end only Wire Size ia. x Width Center Hole ia. rim Recom. Speed (rpm) RBU x PF RBU x PF RBU x PFZ00048 RBU x PFZ00049 RBU x PFZ RBU x PFZ00042 RBU x *** Stainless steel wire brushes on request. INUSRIAL BRUSH Other center hole sizes on request. Adaptor pairs AM 5 Center Hole ia. PFZ AM 5/6 4 PFZ AM 5/ BRUSHING WHEEL BRUSH AN CUP BRUSH Wheel Brushes, COMBIWIS Advantages of the new COMBIWIS knot style: Smooth operation, even on corners and edges No recoiling of the brush on edges Enhanced tool life Increased stock removal rate Prevention of the knotting becoming unravelled in use escription Wire Size No. of Knots ia. x Width Center Hole ia. mm (Inch) rim Recom. Speed (rpm) PF RGB x (7/8 ) PF RGB x (7/8 ) Other center hole sizes on request. Flaring Cub Brushes with threaded hole COMBIWIS Suitable for removing rust, descaling, weld dressing, deburing. Its conical shape make this tool ideal for work in hard-to-reach areas. Highly versatile, especially with difficult work. Recommendation for use: For heavy duty use on angle grinders at elevated speeds (up to 80m/s). escription Size Wire No. of Knots ia. x Width Center Hole ia. rim Recom. Speed (rpm) PF KBG x 3 M PFZ KGB x 5 M Ordering note : We are available in Stainless steel wire. ABRASIVE PROUC 35

38 INUSRIAL BRUSH CUP BRUSH Cup Brush - Knotted Steel Wire Excellent for heavy duty brushing, mainly on large surfaces, and for deburring, cleaning and rust removal. hese brushes are characterized by their particularly aggressive abrasive action. he supproting ring prevents filaments from escaping sideways. he ring is removed once the fill rest of the brush can be used up normally. Recommendation for use Suitable drive systems: stationary machines, angle grinders. When using angle grinders, please observe permitted rpm limit. Wire Size Brush ia. rim hread Recom. Speed (rpm) PF BG M PFZ BG M PFZ BG M PFZ BG / PFZ BG / **** Without supporting ring Ordering note : We are available in Stainless steel wire Cup Brush - Crimped Steel Wire Cup Brushes - Crimped Steel Wire Wire Size Brush ia. rim hread Recom. Speed (rpm) PF BU M PF BU M PF00022 BU M Cup Brushes - Stainless Steel (INOX) Wire Wire Size Brush ia. rim hread Recom. Speed (rpm) PFZ BU 75 (INOX) M PFZ BU 00 (INOX) M BRUSHING Scratch Brush Excellent for cleaning in hard-to-reach areas, e.g., angle or corners, pipes, etc. Wire ia. rim Overall PF HBG 0 S Steel 0 PF HBG 0 INOX Stainless Steel 0 PFZ00043 HBG 0 MES Brass 0 Wire Scratch Brush for File Scratch brush for cleaning files Wire ia. rim Wire Overall- PF HBF 0 S Steel ABRASIVE PROUC

39 ABRASIVE AN FINISHING PROUC Aluminium Oxide for Steel, Wood and Plastic KW KW KW Grain : aluminium oxide refined Bonding : resin over resin Version : flat form Pattern : single tap Backing : glass fibre reinforced Specification iameter x Bore in 00 x 6 Grit Sizes Available : Max. Operating Peripheral Speed (m/s) 80 Max. Revolution per minute (rpm) 5,300 Packaging (Quality/Pack) (Units/pcs.) 0 INUSRIAL BRUSHES ABRASIVE AN FINISHING PROUC #40 #80 #20 escription KW KW Flap isc Aluminium Oxide 00 x 6mm #40 KW KW Flap isc Aluminium Oxide 00 x 6mm #80 KW KW Flap isc Aluminium Oxide 00 x 6mm #20 Aluminium Oxide For Steel, Wood, and Plastic KW KW KW Grain Bonding Version Pattern Backing : zirconium oxide : resin over resin : flat form : single tap : glass fibre reinforced Specification iameter x Bore in 00 x 6 Grit Sizes Available : Max. Operating Peripheral Speed (m/s) 80 Max. Revolution per minute (rpm) 5,300 Packaging (Units/pack) 0 #40 #80 #20 escription KW KW Flap isc Zirconium Oxide 00 x 6mm #40 KW KW Flap isc Zirconium Oxide 00 x 6mm #80 KW KW Flap isc Zirconium Oxide 00 x 6mm #20 ABRASIVE ABRASIVE PROUC 37

40 ABRASIVE AN FINISHING PROUC FIBER AN PAPER ISC Fiber isc Aluminium Oxide CUING WHEEL Cut Off Wheel General purpose disc for all metal grinding application Medium hard bond for an optimal ratio between grinding performance and disc life KW KW03-27 KW General purpose disc for all metal cutting application Made from precious corundum Medium hard bond for an optimal ratio between performance and disc life escription KW KW03-32 Fiber isc Aluminium Oxide 4x5/8 #A80 KW KW03-33 Fiber isc Aluminium Oxide 4x5/8 #A20 Specification KW KW03-27 KW imension 05 x 2 x x 3 x x 3 x 25.4 imension (Inch) 4/7 x 5/64 x 5/8 4 x /8 x 6 x /8 x Shape Speed (rpm) 3,700 3,900 3,400 Cut. Speed (m/s) escription KW KW Cut Off Wheel 05 x 2 x 6mm (4 ) KW KW03-27 Cut Off Wheel 350 x 3 x 25.4mm (4 ) KW KW Cut Off Wheel 400 x 3 x 25.4mm (6 ) Superthin Cutting Wheel KW FLEXIBLE EPRESSE CENRE WHEEL Super thin fast-cut cutting disc Made of precious corundum he high-performance A60 range for metals and stainless steel Specification imension 05 x x 6 imension (Inch) 4 x / 24 x 5/8 Shape Speed (rpm) 5,300 Cut. Speed (m/s) 80 escription KW KW Superthin Cutting Wheel 05 x x 6mm (4 ) Metal Stainless Steel Stone and Glass KW Features for KW : Special discs for castings made of iron, steel, non-ferrous metals and common metals Made of aluminium oxide KW Features for KW : Special discs for stainless steel Made of semi precious and corundum zirconium oxide KW Features for KW : Special discs for glass and stone Made of silicon carbide Key points for best results : Hold your right angle grinder at 5 o for curvature surface grinding Run the cut-off wheel at the highest possible speed marked on the wheel Specification KW KW KW imension 02 x 3 x 6 02 x 3 x 6 02 x 3 x 6 imension (Inch) 4 x / 8 x 5 / 8 4 x / 8 x 5 / 8 4 x / 8 x 5 / 8 Shape Speed (rpm) 3,700 3,700 3,700 Cut. Speed (m/s) escription KW KW KW KW KW KW Flexible epressed Centre Wheel for Metal 02 x 3 x 6mm (4 ) Flexible epressed Centre Wheel for Stainless Steel 02 x 3 x 6mm (4 ) Flexible epressed Centre Wheel for Stone and Glass 02 x 3 x 6mm (4 ) 38 ABRASIVE PROUC

41 EPRESSE CENER WHEEL For General Steel KW03-25 KW escription KW KW03-25 epressed Centre Wheel 50 x 6 x 22.2mm (6 ) KW KW epressed Centre Wheel 80 x 6 x 22.2mm (7 ) General purpose disc for all metal grinding applications Made from aluminium oxide Medium hard bond. For an optimal ratio between grinding performance and disc life Specification KW03-25 KW imension 50 x 6 x x 6 x 22.2 imension (Inch) 6 x / 4 x 7 / 8 7 x / 4 x 7 / 8 Shape Speed (rpm) 0,200 8,500 Cut. Speed (m/s) ABRASIVE FOR CAS IRON AN SEEL General purpose disc for all metal grinding applications Made from brown fused aluminium oxide Medium hard bond for an optimal ratio between grinding performance and disc life KW KW KW KW Specification KW KW KW KW imension 00 x 6 x 6 25 x 6 x x 6 x x 6 x imension (Inch) 4 x / 4 x 5 / 8 5 x / 4 x 7 / 8 6 x / 4 x 7 / 8 7 x / 4 x 7 / 8 Shape Speed (rpm) 3,700,000 0,000 8,500 Cut. Speed (m/s) escription KW KW epressed Centre Wheel 00 x 6 x 6mm (4 ) KW KW epressed Centre Wheel 25 x 6 x 22.23mm (5 ) KW KW epressed Centre Wheel 50 x 6 x 22.23mm (6 ) KW KW epressed Centre Wheel 80 x 6 x 22.23mm (7 ) epressed Center Wheel for Cast Iron KW03-28 KW KW KW General purpose disc for all cast iron material : FC, FC Made from aluminium oxide Custom reinforced resinoid bond for an optimal ratio between grinding performance and disc life Specification KW03-28 KW KW KW imension 00 x 6 x 6 25 x 6 x x 6 x x 6 x imension (Inch) 4 x / 4 x 5 / 8 5 x / 4 x 7 / 8 6 x / 4 x 7 / 8 7 x / 4 x 7 / 8 Shape Speed (rpm) 3,700,000 0,000 8,500 Cut. Speed (m/s) escription KW KW03-28 epressed Centre Wheel 00 x 6 x 6mm (4 ) F/Cast Iron KW KW epressed Centre Wheel 25 x 6 x 22.23mm (5 ) F/Cast Iron KW KW epressed Centre Wheel 50 x 6 x 22.23mm (6 ) F/Cast Iron KW KW epressed Centre Wheel 80 x 6 x 22.23mm (7 ) F/Cast Iron ABRASIVE PROUC 39

42 IAMON WHEEL AN CUER IAMON WHEEL AN CUER iamond Wheel KW KW For ry Grinding KW KW03-26 Flat surface Convex surface itanium coated itanium coated Ideal for grinding on Ideal for grinding on glass, glass, ceramic, metal, and ceramic, metal, and composite composite material material escription KW03-26 KW iamond Electro Coated Gold 05 x 20 /6mm iamond Electro Coated Gold 05 x 20 /6mm IAMON CUER iamond Cutter For Wet Application Ideal for cutting : Concrete, marble, brick, granite and asphalt For ry and Wet Application Ideal for cutting : Natural and artificial stone, brick, granite, reinforced concrete, marble, fiberglass applied for wet and dry cutting escription Max. Speed KW KW iamond Wheel urbo Wet 05mm (4 ) 4,500rpm KW KW iamond Wheel Wet and ry 05mm (4 ) 4,500rpm FILE File Set KW Continuous Rim (Wet) Continuous Rim (urbo) KW IAMON CUER iamond Cutter KW Contains : pc halfround smooth file 40mm pc flat hand smooth file 40mm pc triangle smooth file 40mm pc round smooth file 40mm pc square smooth file 40mm pc flat warding smooth file 00mm KW KW KW Cutting Capacity Wet : 0m ry : 60 ~ 80m Cutting Capacity Wet : 90m ry : 60m Cutting Capacity Wet : 20m ry : 70 ~ 90m KW Contains : pc halfround smooth file 40mm pc flat hand smooth file 40mm pc triangle smooth file 40mm pc round smooth file 40mm pc square smooth file 40mm pc flat warding smooth file 40mm Ideal for Cutting : Concrete ile Stone Brick Marble escription KW KW iamond Cutter Blade Gold 05 x 2.2 x 7x20/6mm KW KW iamond Cutter Blade Green 05 x 2.2 x 7x 20/6mm KW KW iamond Cutter Blade Cyan 05 x.2 x 7 x 20/6mm KW Contains : pc halfround rasp file 60mm pc flat hand rasp file 60mm pc triangle rasp file 60mm pc round rasp file 60mm pc square rasp file 60mm pc flat warding rasp file 60mm escription KW KW Needle File Set 40mm (6pcs) KW KW Key File Set 40mm (6pcs) KW KW Needle Rasp File Set 60mm (6pcs) 40 ABRASIVE PROUC

43 FILE SE 6-8 7pcs 5pcs 2pcs escription Contains : Plastic handles All size 6 slim taper smooth single cut file 6 half round smooth file 8 half round rasp file 6 round bastard file 6 flat bastard double cut file 8 mill bastard single cut file KW KW File Set 6~8 (7 pcs) Contains : 5 pcs 8 file with handle : pc flat second cut file pc round bastard file pc square second cut file pc half round second cut file pc three square second cut file Case imension : 36 x 35 x 3cm Weight : 0,7kg Contains : 2 pcs plastic handle All size pc 6 round smooth file pc 6 slim taper smooth file pc 6 three square second cut file pc 8 shoe rasp file pc 8 farmer second cut file pc 8 round bastard file pc 8 half round wood rasp pc 8 flat smooth file pc 8 half round second cut file pc 0 flat bastard file escription KW KW File Set 8 (5pcs) KW KW File and Rasp Set (2 pcs) FILE SE Flat File Feature : apered in width and thickness ouble cut on both sides and single cut on edges Benefit : Favored for use in factories, ma chine shops and garage Size mm Inch escription KW KW Flat Bastard File KW KW Flat Smooth File KW KW Flat Bastard File KW KW Flat Smooth File KW KW Flat Bastard File KW KW Flat Smooth File KW KW Flat Bastard File KW03008 KW Flat Smooth File KW KW Flat Bastard File KW KW Flat Smooth File Half Round File Round File Feature : Round on one side and flat on the other. Both sides are double cut. he file tapers toward the point in both width and thickness Benefit : he half round side (front) makes this file ideal for getting into rounded holes, concave corners, crevices etc. It also can be used on flat surfaces Size mm Inch escription KW KW Half Round Bastard File KW KW Half Round Smooth File KW KW Half Round Bastard File KW KW Half Round Smooth File KW KW Half Round Bastard File KW KW Half Round Smooth File KW KW Half Round Bastard File KW03009 KW Half Round Smooth File KW KW Half Round Bastard File KW KW Half Round Smooth File Feature : apered in width and thickness. ouble cut on both sides and single cut on edges Benefit : Favored for use in factories, machine shops and garage Size mm Inch escription KW KW Round Bastard File KW KW Round Smooth File KW KW Round Bastard File KW KW Round Smooth File KW KW Round Bastard File KW KW Round Smooth File KW KW Round Bastard File KW KW Round Smooth File KW KW Round Bastard File KW KW Round Smooth File ABRASIVE PROUC 4

44 FILE FILE hree Square File Feature : riangular as the taper files but double cut with sharp corner slightly set and single cut edges. Angle are 60 and tapers toward the point. Benefit : For cleaning out corner, filling angles, taps and cutter. It is also used on flat surfaces. Size mm Inch escription KW KW hree Square Bastard File KW KW hree Square Smooth File KW KW hree Square Bastard File KW KW hree Square Smooth File KW KW hree Square Bastard File KW KW hree Square Smooth File KW KW hree Square Bastard File KW03002 KW hree Square Smooth File Square File Feature : he cross-section is square. It is double cut and tappers toward the point Benefit : For filing grooves, square hole inside corner and for finishing cutting tools. Larger sizes frequently preferred to correspond with flat files because heavier sections and four filling surfaces Size escription mm Inch KW KW Square Bastard File KW KW Square Smooth File KW KW Square Bastard File KW KW Square Smooth File KW KW Square Bastard File KW KW Square Smooth File KW KW Square Bastard File KW KW Square Smooth File Slim aper File Single cut Edges set and cut for filing gullets between saw teeth riangular in shape and tapered toward the point Size escription mm Inch KW KW Slim aper Bastard File KW KW Slim aper Bastard File KW KW Slim aper Bastard File KW KW Slim aper Bastard File AJUSABLE FILE, CYLINER HONE Adjustable File, Cylinder Hone Adjustable Cylinder Hone 4 KW03-27 KW03-29 File with holder For curved tooth files without tang escription KW KW Adjustable Flexible File with Holder 4 KW KW03-23 Flexible File 4 Benefits : Can be used with either 2 or 4 files Easily adjusted for curving file outward or inward escription KW KW03-27 Adjustable Brake Cylinder Hone /6 ~ 2 /5 KW KW03-29 Replacement Stone for KW03-27 KW KW03-28 Adjustable Brake Cylinder Hone 2 ~ 7 KW KW03-30 Replacement Stone for KW ABRASIVE PROUC

45 WIRE BRUSH Wire Brush Set Flexible Honing Brush /4 Hex. Shank KW escription KW KW Wire Brush Ø Set 9-9mm (20pcs) escription KW KW Flexible Honing Brush 8mm KW KW Flexible Honing Brush 0mm KW KW Flexible Honing Brush 2mm KW KW Flexible Honing Brush 6mm KW KW Flexible Honing Brush 20mm KW KW03-29 Flexible Honing Brush 22mm KW KW Flexible Honing Brush 25mm KW KW Flexible Honing Brush 30mm KW KW Flexible Honing Brush 32mm KW KW Flexible Honing Brush 35mm KW KW Flexible Honing Brush 38mm KW KW Flexible Honing Brush 5mm KW KW Flexible Honing Brush 60mm WIRE BRUSH WIRE BRUSH Bench Grinder Brush ø50 ø00 ø200 Aggressive, multiple row wheel brushes with brass coated steel wire, crimped (0,30mm) For medium and heavy applications imension escription A Arbor hole B max R rpm mm mm mm mm mm KW KW03-40 Bench Grinder Brush 00 x 6mm ,000 KW KW03-4 Bench Grinder Brush 25 x 8mm ,000 KW KW03-42 Bench Grinder Brush 50 x 25mm ,000 KW KW03-43 Bench Grinder Brush 200 x 25mm ,500 KW KW03-44 Bench Grinder Brush 250 x 25mm ,000 CUP BRUSH Knotted Cup Brush ø75 ø65 ø80 ø00 KW03-49 KW03-50 KW03-5 KW03-52 Knotted Cup Brush. Brushing tools with tempered steel wire, knotted (0.50mm), for high speed angle grinders. Aggresive tools for fast heavy duty cleaning and brushing of large surfaces. hey remove carbon, paint, rust, scale, and other kinds of contamination. he removable bridle prevents the trim from flexing. escription imension mm ABRASIVE PROUC 43 mm Knots mm hread G mm KW KW03-49 Knotted Cup Brush 65mm x M0 x M0 x.5 2,500 KW KW03-50 Knotted Cup Brush 75mm x M0 x M0 x.5 8,500 KW KW03-5 Knotted Cup Brush 80mm x M4 x M4 x 2.0 8,500 KW KW03-52 Knotted Cup Brush 00mm x M4 x M4 x 2.0 8,500 rpm

46 WIRE BRUSH CUP BRUSH Crimped Cup Brush KW03-45 ø75 WIRE BRUSH aper Brush KW03-47 ø80 KW03-48 ø00 escription KW KW03-69 Crimping Cup Brush ø75. Brushing tools for single handed angle grinders. For light or medium rust removal and deburring. Brass coated steel wire, crimped (0.30mm). imension hread escription mm mm G mm rpm KW KW03-45 Crimped Cup Brush 75mm x M0 x, M0 x.5 2,500 KW KW03-46 Crimped Cup Brush 80mm x M0 x, M0 x.5 8,500 KW KW03-47 Crimped Cup Brush 80mm x M4 x 2, M4 x 2.0 8,500 KW KW03-48 Crimped Cup Brush 00mm x M4 x 2, M4 x 2.0 8,500 aper Brush Brass Coat Steel Wire 00 x 0 mm x M0 Crimping Cup Brush ø80 and ø00. Sturdy tools for heavy cleaning jobs and for brushing large surfaces. Brass coated steel wire, crimped (0.30mm). Feature : he ideal shape for brushing hard to reach areas. Multipurpose brushes for light and medium cleaning jobs. Brass coated steel wire, crimped (0,30mm). mm imensions A mm mm hread G rpm M0 x.5 2,500 iy Wheel Brush ø50 ø75 ø00 Feature : Wheel Brushes Sturdy tools for heavy cleaning jobs and brushing large surface with coarse wire. he small diameter makes them most suitable for use on hard to reach areas. Fill material brass coated steel wire, crimped. KW03-53 KW03-54 KW03-55 escription imensions mm A mm mm Shank Ø KW KW03-53 IY Wheel Brush 50mm /4 KW KW03-54 IY Wheel Brush 75mm /4 KW KW03-55 IY Wheel Brush 00mm /4 iy Cup Brush ø75 KW03-57 ø50 KW03-56 iy End Brush ø25 ø5 KW03-58 KW Wheel Brushes Sturdy tools for heavy cleaning jobs and brushing large surface with coarse wire. he small diameter makes them most suitable for use on hard to reach areas. Fill material brush coated steel wire, crimped. escription imension mm A mm mm Shank ø KW KW03-56 IY Cup Brush 50mm / 4 KW KW03-57 IY Cup Brush 75mm / 4 KW KW03-58 IY End Brush 25mm / 4 KW KW IY End Brush 5mm / 4 Scratch Brushes Universal Hand Scratch Brushes, with plastic handle for general cleaning purposes 44 USE AS A HELPING OOLS O CLEAN MAERIAL BEFORE FINISHING PROCESS imensions escription A mm mm KW KW03-59 Scratch Brush Steel Wire 3 Row KW KW03-60 Scratch Brush Steel Wire 4 Row KW KW03-6 Scratch Brush Steel Wire 5 Row KW KW03-62 Scratch Brush Steel Wire 6 Row KW KW03-63 Scratch Brush Brass Wire 2 Row KW KW03-64 Scratch Brush Brass Wire 3 Row KW KW03-65 Scratch Brush Brass Wire 4 Row KW KW03-66 Scratch Brush Stainless Steel Wire 2 Row KW KW03-67 Scratch Brush Stainless Steel Wire 3 Row KW KW03-68 Scratch Brush Stainless Steel Wire 4 Row ABRASIVE PROUC

47 CONVENIONAL GRINING WHEEL Conventional Grinding Wheel (Explanation) (Grinding Wheel) A grinding wheel which is composed of three elements; grain, bond and pore, rotates at high speed to grind a workpiece efficiently, and create a fine finish with high dimensional accuracy. his machining method is called grinding. As the work progresses, grain wears, causes cleavage, and breaks down while generating new cutting edges. this is the self-sharpening of a cutting edge, and is the biggest feature that other grinding tools do not have. In general precision grinding, a new cutting edge is generated forcibly when the grain is worn. his is called dressing. GRINING WHEEL PA Abrasive 60 Grain Size K Grade 7 Structrure V Bond 75R Mfrs.Record Shape 255x25x25.40 Wheel Size 6A RG A WA SA 9A PA GA HA C GC Coarse Fine C K Z Soft Hard ense Open V=Vitrified B=Resinoid R=Rubber S=Shellac OM=Oxychloride Vitrified 53R 75R 8R 92 Resinoid 5W X99 Rubber 20 W No. No. 87 (diameter)x (thickness)x (hole)mm Five Elements of Grinding Wheel l GRAIN Has in important function as a cutting edge to cut the workpiece. his is most influential to the quality of grinding wheel. herefore, the right wheel for the work material and grinding condition should be selected. l GRAIN SIZE A unit to indicate size of grain using a number (#). If the value is closer to, the grain size becomes (coarse). his will affect the surface finish of a workpiece and grinding efficiency. he most suitable grain size for your grinding work should be selected. l GRAE his represents the degree of bond strength that grips the grain. Generally, it is also called hardness. It does not represent the hardness of grain and strength of the grinding wheel. It represents softness and hardness of grinding interaction using letters. A character closer to A means the strength is low (soft), and closer to Z means strength is high (hard). A grade should be selected according to the hardness of the work material and desired grinding efficiency. l SRUCURE his implies volume ratio of grain that occupies a certain capacity of grinding wheel. he structure is represented by a number. If the space between grains is narrow, it is said the structure is open. Wheels in which the structure is made large (more than 0) are called Porous type wheels and are used for avoiding grinding burn in work. l BON his works to bond and hold grain. Bond type that is suitable for the use and application of the grinding wheel should be selected. Vitrified bond (V): his is a ceramic and glass type bond. High in water and chemical resistance and excellent in form maintaining ability, this is used for general precision grinding, super finishing and honing. Resinoid bond (B): his is phenol resin bond. Because of its high rigidity and resistance to high- speed rotation, it is used for free grinding. aking advantage of large elastic characteristics, this is also used for precision finish grinding. Other resin bonds to be noted are epoxy resin bond (Y) which is for preventing burns in grinding, and polyvinyl acetal resin bond (P) which is highly elastic and is used for polishing. Rubber bond (R): his is a rubber (mainly artificial) bond. Fully utilizing its characteristics of large elasticity and thermal softening, it is used for regulating wheels of centerless grinders, and cutting wheels. (iamond CBN Wheel) ABRASIVE PROUC 45

48 ABRASIVE CUING OOL CONVENIONAL GRINING WHEEL Life King Wheel FEAURES Long Life : he dress interval is improved, and the wheel life is extended because the abrasive grains do not wear easily and an outstanding cutting edge is sustained longer. High-efficiency grinding : High-efficiency grinding is achieved due to high abrasion resistant A grain ( Each grain maintains a sharp cutting edge longer) therefore minimizing thermal damage. ressing performance : A is the toughest of conventional aluminium oxide grain, but maintains favorable dressing performance similar to the conventional grinding wheel. APPLICAION OF VLK and VLK2 VLK Long Life : Cylindrical, surface, crank, cam, gear, internal, centerless grinding VLK2 Free Cutting : Cylindrical, surface, gear, internal, centerless, groove, creep feed grinding Low grinding efficiency High GRINING PERFORMANCE A-VLK V36 CONVENIONAL BON Low (Large) SH-V35 VLK2 V35 Grinding ratio (Wheel wear) VLK High (Small) Power Consumption(kW) WA-V35 A-VLK Power Consumption is 30% lower and the grinding ratio is 40% higher than SH-V35 Life King was developed by matchingv a specific combination of a new abrasive grain - A with an exclusive bond VLK and VLK2 for superior holding / bonding force. he sustainability of cutting efficiency and grinding performance are superior to single crystal grain of conventional grinding wheel. oughness (Index),2,,0 0,9 0,95,00,0 0,8 WA SH A A is toughest conventional aluminium oxide grain GRINING PERFORMANCE Grinding Wheel : Size Spec. ressing Conditions : 405x25x27 WA80L7V35 SH80L7V35 A80L7VLK resser 0,8LL resser ress Lead 0.6mm/r.o.w epth of Cut Ø20μm/pass x 5 pass Grinding Conditions : Specifications Machine Grinding Method Workpiece Material Wheel Speed (m/s) Workpiece Speed (m/s) Grinding Efficiency (Z ) Stock Removal (mm3) Spark Out Coolant Cylindrical Grinder Cylindrical Plunge Grinding Wet SCM435 Ø50x0 (Hardened Steel HRc48) 60m/s 0.5m/s 2mm3/mm s otal Stock Removal 8x03 0rev. SEC-700(x50) SOCK REMOVAL ILL WORKPIECE HARNESS EERIORAES Stock Removal (index), ,85,00,35 WA-V35 SH -V35 A-VLK he stock removal ofa-vlk is 30% greater than SH-V35 46 ABRASIVE PROUC

49 CONVENIONAL GRINING WHEEL Grinding Wheels YBS, and YBSL for ouble isc Grinder EPOXS Features: Special resin is used as the bond materials for EPOXS grinding wheel, which generated a sharp edge, maintains its sharpness and prevent grinding burn. Benefit: No grinding burn was resulted. Grinding Wheel For B20UC for Roll Grinding (For Cold Roll, Front Stage Work Roll, And Back-up Roll) Features: he easy control of the grinding wheel surface, it not only produced good grinding surface properties, but also allows performing rough, from grinding to finish grinding with only one wheel. Benefits: Grinding wheel B20UC for roll grinding shows excellent performance in rough grinding of cold rolled, front stage work rolls and high efficiency in grinding of back up rolls. Piercing Hole isc Grinding Wheel (for ouble isc Grinding) Super Wide Center less Grinding Wheel Features: hese holes and grooves efficiently supply grinding fluid to enhance the cooling effect, as well as to discharge chips smoothly to suppress grinding burn, its also improves accuracy and quality. his dressing interval and service life of the wheel are tremendously extended. Benefits: he pierced hole type disc grinding wheel produced no grinding burn and extended the service life even if the grinding wheel is slightly harder than conventional product. Features: Center less grinding which enable high efficiency grinding is mostly used. Recently, infeed centerless grinding is more used for better grinding efficiency. Benefits: Noritake s super wide centerless grinding wheel is specially manufactured to be uniform in thickness direction, so that high efficiency at accuracy grinding can be achieved. ABRASIVE CUING OOL Sandwich Grinding Wheel for Grinding of Crankshaft With Shoulder Features: his sandwich grinding wheel is composed of three layers different in abrasive and grain size Benefits: his is also effective in improvement of surface roughness of pins. Compared to be conventional single body grinding wheel, considerable improvement in grinding performance and efficiency can be achieved. 2-layer Grinding Wheel for Angular Grinding Features: he 2-layer grinding wheel for angular grinding is a vitrified grinding wheel for simultaneous grinding of shaft and face, which is called angular grinding and is effective for improvement of grinding efficiency. Benefits: he layer for the face is designed to be a porous and coarse abrasive with soft hardness grade using sharp abrasive material. Small Precision Grinding Wheel Features: With special bonding materials V36 and V55 (Aluminium Oxide Grain), and V8 (Silicone Carbide Grain), sharp cutting edge is generated so that excellent grinding performance can be maintained from start to end. Benefits: Since dimensional accuracy of the wheel is enhanced, truing during mounting the wheel can be small, reducing loss wear and time due to trying. ABRASIVE PROUC 47

50 ABRASIVE CUING OOL SANAR SHAPES FOR GRINING WHEEL No. Straight escription Straight No.3 apered One Side No.2 Cylinder escription Cylinder No.4 apered wo Sides escription apered One Side escription appered wo Sides No.5 Recessed One Side No.6 Straight Cup E F E 2 E 4 W E E escription escription Recessed One Side Straight Cup No.7 Recessed wo Sides No.8 Safety E escription escription Recessed wo Sides Safety 48 ABRASIVE PROUC

51 SANAR SHAPES FOR GRINING WHEEL No.9 ovetailed One Side No.0 ovetailed wo Sides ABRASIVE CUING OOL escription escription ovetailed One Side ovetailed wo Sides No. Flaring Cup No.2 ish E E escription escription Flaring Cup ish No.3 Saucer No.27 epressed Center E escription escription Saucer epressed Center For more detail information about Pneumatic ools Section 7 ABRASIVE PROUC 49

52 ABRASIVE CUING OOL CBN AN IAMON RESSER GRINING WHEEL CBN Grinding Wheel l iamond CBN wheel his is a wheel using diamond which is the hardest among existing substances, and has wear resistance, and CBN (cubic boron nitride) which is the second hardest next to diamond, as the grain. l iamond here are natural and artificial diamond. Recently, artificial diamond is mostly used. It is synthesized into spherical or cube shape. It is sometimes metal coated and is combined with compatible bond for us. his is used as abrasive material for grinding, cutting and lapping of tough and brittle non-metal such as glass. l CBN his substance does not exist in nature. Inferior to diamond in terms of hardness, the thermal safety is superb. It demonstrates excellent grinding characteristics for tough and brittle steel work materials. Similarly with diamond, metal coated CBN or CBN with micro crystal body are available. his is used in combination with a compatible bond. (Borazon is a registered name of GE Co.) l Bond Metal bond (M): his is bond into which various metal powder are mixed. As if features gripping strength of grain and long service life, it is used for cutting of concrete and stone material. Besides, this is used for grinding and honing of optical glass and ceramics. Resinoid bond (B): his is a phenol thermal setting resin bond, it hold grain less powerfully, but its low elastic coefficient is suitable for wet grinding from to heavy duty grinding. Vitrified bond (V): his is ceramic and glass type bond. As this bond is next high in gripping strength of grain to metal bond, excellent in form maintaining characteristic, and superb power in grinding power, this bond is used for precision grinding. Not only porous type, but also micro pore type and the type without pore also available. Electroplated Bond (P) Grains are plated onto the base material by means of electroplating. It is possible to manufacture wheels with complicated shape, and it grinds excellently. However, the grain layer is only single (multiple layer type for special application is also available). he life of the bond is shorter than other bonds. he component element of a diamond CBN wheel is basically the same as a grinding wheel, but the area equivalent to structure of grinding wheel is the concentration. Concentration is the amount of grain contained in the unit volume of diamond and CBN grain layer. When the concentration is 00, the grain layer per cm³ contains 4.4 carat of diamond and CBN, and it is indicated as 4.4 ct/cm³. Ordering Information In order to insure the accurate and prompt fulfilment of each other, please indicate the following. All of term are necessary to manufacture.. Quantity 2. elivery 3. Wheel type (Shape) Such as A, 6A2, V9 etc 4. imensional size as shown in catalogue, iameter, hickness, Arbor Hole Size, iamond epth, etc. 5. Complete specification Abrasive, Grit size, Grade, Concentration, Bond 6. Wet or ry Grinding, if you supply us comprehensive information of your working conditions like the following, we could supply you more suitable wheels. 7. Working condition Wheel speed, epth of cut, table speed, etc. 8. Application Name of parts, Materials, epth of reductions 9. Accuracy in finished tolerance, Required surface roughness 50 ABRASIVE PROUC

53 CBN AN IAMON RESSER GRINING WHEEL Vitrified CBN Wheel for Cam Lobe Grinding Feature: For cam lobe grinding and concave shaped cams. Vitrified CBN KP Wheel for Gear Grinding Benefit: Improvement of grinding accuracy and stability. Improvement of grinding efficiency. Grinding cost is considerably reduced. Features: Possible to use the vitrified CBN wheel with gear grinders for conventional wheel without modification. Benefits: Excellent grinding performance for long time and excellent shape maintaining accuracy, high quality grinding, and improvement of productivity. Vitrified CBN Wheel for Pin Grinding Vitrified CBN KP Wheel for Slot Grinding Features: For grinding of crank shafts and pin for automobile engines, develop of special vitrified CBN wheel for high precision and efficiency grinding. Benefits: Improved grinding accuracy, its long wheel life can drastically reduced replacement frequency of the wheel. Features: he biggest feature of the vitrified CBN-KP grinding wheel for slot grinding has the optimum width and uniformity. Benefits: Excellent result in high accuracy and high precision of vane grooves for compressor rotors, and enabled lowering of grinding cost. Also improvements of grinding efficiency. ABRASIVE CUING OOL Vitrified CBN Mounted Wheel Features: High grinding and dressing abilities in the general applications and high concentrated CBN wheel specially requires the durability. Benefits: Excellent grinding ability, improves the finish surface roughness and other shape precision, and improved reduction effect of the processing cost. High Precision Electroplated Wheel Features: High performance gears for automobiles requires extremely high shape accuracy, and efficient cut for complicated shape. Benefits: High precision electroplated wheel, and excellent in uniform abrasive projection, and highly accurate surface finish can be obtained constantly. Vitrified CBN Wheel for Way Grinding Features: he upper surface of the machine tool beds have a large stock removal and cause distortion easily due to grinding overload and heat. Benefits: Excellent grinding performance and heat absorption performance. CG Wheel Features: CG wheel is a high performance diamond wheel for curve generating of optical lenses. Benefits: Superior sharpness, and highest wear resistance. G iamond CBN Wheel Features: ouble disc surface grinding uses diamond and CBN as abrasive grain. Available bond type such as resin, metal, and vitrified. o meet the requirements of various work pieces types such as steel, cast iron, non ferrous and non metal. Benefits: High precision and high efficiency grinding. iamond CBN Wheel for Profile Grinding Features: Use for profile grinding of mainly metal dies, such as cemented carbide, high speed steel, and die steel has been newly developed. Benefits: Prevent deterioration of grinding quality and maintaining of precise wheel shape for the highest priority, ABRASIVE PROUC 5

54 CBN AN IAMON RESSER GRINING WHEEL ABRASIVE CUING OOL iamond CBN Wheel for Roll Grinding Features: For roll grinding, recently rolled rollers have been diversified high quality of rolls, composed of special resin customized for large rolls and rolls easily ground. Benefit: Longer service life and effectively reduced grinding cost. Centerless iamond CBN Wheel Features: Used for centerless grinding, high performance grinding can be performed with a fine abrasive grain. Benefits: his wheel is excellent in dimensional and balance accuracy even though the size is large, high accuracy grinding can be efficiently performed. Centerless iamond Wheel for hread Grinding Features: Use for thread grinding of magnetic material (soft ferrite). Use to form the material in to the specified screw thread on the diamond layer. Each thread is sharped very accurately. Benefit: Wheel can last for a long time. Pencil Edging Wheel Features: he pencil edging wheel is a wheel for edge processing of window glass for automobiles, building and furniture. Benefits: Uses a special high strength metal bond features long service life and excellent accuracy, it contribute to improvement of yield rate. Electroplated Wheel for Centering And Edging Features: Electroplated wheel for centering and edging during the manufacturing process of optical lenses, watch glass and eyeglass lenses. Contributes a long service life. For work that requires extra accuracy. Benefit: Improvement of production productivity iamond CBN Honing Stone Features: he diamond CBN honing stone is used for precision honing of the inner diameter of a cylinder stone is particularly suitable for honing of cast iron, thermal refined material, high hardness steel, ceramics and other difficult to cut materials. Benefits: High bonding strength to enable high efficiency work, labor can be saved as the shoe is the throw-away type. 52 ABRASIVE PROUC

55 SANAR SHAPES FOR IAMON AN CBN WHEEL W SANAR SHAPES FOR IAMON AN CBN WHEEL A A8 AR E x ABRASIVE CUING OOL ARSS A 6A2 X L x W x l E H H V2 A2 V9 Y9 C9 S W W X S X U S U X W W U K K K X E E E H J H J H J F FF 9A3 X W x E H R H ABRASIVE PROUC 53

56 R ABRASIVE CUING OOL SANAR SHAPES FOR IAMON AN CBN WHEEL SANAR SHAPES FOR IAMON AN CBN WHEEL 9U EE W E x H HH 4A L w X x x V H M J E U E X L H FF6Y LL6Y H x H x R U2 U U2 U HHH HHF 2V9 W x L P K X U E S r H J 6A2S 2A2 2V4 W K x x Z w K w Z Vx H E H J 54 ABRASIVE PROUC

57 IAMON RESSER Single Point resser Features: his is a type of dresser on to the shank which a natural diamond stone is set directly. his is the simplest dresser among diamond tools. Each type is simple, but slightly different. Benefits: By understanding its orientation and using conditions correctly, tool cost can be reduced, and working efficiency and quality of the workpiece can be improved. ABRASIVE CUING OOL Standard imensions. Straight shank 2. aper shank L l B L l ØH Ø Ø l L Landis ØH H L litter L l Ø L B litter litter2 aper / / M# M# M# M# 4. aper shank with head B ØH l 2 l 3 H L litter litter2 litter3 aper B / / M# M# M# 4 6. hreaded shank LØ l 5. V-grooved straight shank L l 90 o Ø L litter Ø L Q L K Q M8 x M8 x M2 x K ABRASIVE PROUC 55

58 ABRASIVE CUING OOL IAMON RESSER Point resser (Cone And Square Shape) Standard imensions. Straight shank (C3A) Features: A conical shaped diamond dresser is called a cone point dresser, and a piramid dresser is called a square point dresser, both of which have a fixed nose angle. Its extremely difficult to grind corners of natural diamond to a certain shape. he condition of the dressing surface is largely effected by the shape of dresser nose. Benefits: Since the cone point dresser has the nose point at the center of the shank, the contact point doesn t change even if the dresser is changed. his helps improved dressing accuracy. On the other hand, the square point utilizes a ridge line well, so grinding performance of a grinding wheel can be improved. 2. Landis (C3G) L L l V Ø ØH V Ø R R L V R H L litter V R Maag (C3B) 3. Matrix (CBC) L.7 Q A.7.3 V K Ø.2 R V R Ø7.9 Ø L V R K Q V R A ABRASIVE PROUC

59 IAMON RESSER Forming resser Features: Corners, and both sides and edges are polished to enable dressing from all parts of the forming dresser. Width of the roof, which is.5-2.0mm as standard can be changed according to the request. iamond used for this dresser is selected based on a severer standard compared to an ordinary dresser. Benefits: he forming dresser is used for dressing of angular grinding wheels, diamond form grinding wheels, stepped cylindrical grinding wheels, and other form grinding wheels. Standard dimensions ABRASIVE CUING OOL Multi Stone resser Features: More than two small diamond pieces of uniform size are set. his arrangement is based on the wheel diameter and width. Usually three to five diamond stones are arranged. Benefits: his type of dresser substitute for dressers with a large grain since it has advantages of long life, low breakage ratio, and fast dressing as the resistance applied to each piece of diamond stones is small. his brings about reduction in dressing cost. Even if the first row wears out, the second and third rows come out, requiring no repairing L H L Litter ABRASIVE PROUC 57

60 ABRASIVE CUING OOL IAMON RESSER Blade resser Features: his is a dresser (multi stone dresser blade type) in which a natural needle shaped long stone is arranged. It can be used for dressing of a form grinding wheel for angular grinding. Benefits: As new point edges come out for the multi row type, no repairs are necessary. By changing grain size, bonding strength and stone arrangement, almost all kinds of grinding wheels can be dressed with this dresser. Since the dresser is highly durable compared to a single point and forming dresser, the dressing cost can be lowered. Standard dimensions Impregnated resser LL resser (Blade resser) d Q L l L Ød Ø Features: his dresser is slightly different from the grit dresser used for correction of general grinding wheels as it uses comparatively small diamond grains. Mainly used for truing of CBN wheels. Benefits: he impregnated dresser is used for correction of wheel for cylindrical grinding, surface grinding and internal grinding, which need linear correction. his dresser can also be used for correction of precision grinding wheels. Features: Longer life of tool: diamond columns are rigidly supported on the blade which can be completely consumed. Consistent dressing: performance is consistently found from tool to tool due to controlled quality and precise size of synthetic diamond rods). Easy to use: LL resser can be completely consumed without any adjustment, turning or re-lapping. Flexibility of designed for a wide range of application from small I.. Grinding to large centerless grinding ( to 5 rods). he LL resser has two different diamond rod configurations. One is for natural dresser life (S) and second design is for maximum dresser life (). Benefits: he LL resser utilizes precision square cut synthetic diamond Rods. ues to single diamond Rod design; size, shape and spacing is kept precisely consistent through out the entire life of the dresser. 58 ABRASIVE PROUC

61 IAMON RESSER Grit resser Features: his is a dresser brought to life by Noritake s excellent development technology and unique manufacturing method. iamond grains are arranged in a regular manner Benefits: Since diamond grains are arranged in a regular manner, resistance during dressing is distributed uniformly, achieving reduction of wear of the dresser, as well as stable dressing. It s high durability makes the dresser cost efficient as the consequence. Since many diamond grains work at the same time. Speed should be two to four times faster than single point dresser. ABRASIVE CUING OOL Indication Method Grain Size of iamond Size of iamond Shape of iamond Grain Size of iamond Shank Shape Size of iamond Grain Size Grain Size of Wheel to be Corrected 2 3 A B R A F B G C H J E L 4 Coarse Coarser than # 46 6 Medium # Fine Finner than #20 A B C Size of iamond W L X W L X d X Standard dimensions ABRASIVE PROUC 59

62 GRINING, CUING WHEEL, AN FLAP ISC GRINING, CUING WHEEL, AN FLAP ISC Features epressed Center Grinding Wheel Metal : Rough grinding wheels for grinding different types of steel materials (including stainless steels and cast materials) escription J Grinding Wheel 4 00x6x6mm A30-BF J Grinding Wheel 5 25x6x22,23 A30-BF J Grinding Wheel 6 50x6x22.23 A30-BF J Grinding Wheel 78X6X22.2 A30-BF J Grinding Wheel 9 230x6x22.23 A30-BF J Grinding Wheel 7 78x6x22.23 A30-BF J Grinding Wheel 6 50x6x22.23 A30-BF Features Cut-off Wheels : Cut-off wheels for cutting all types of steel materials (including stainless steel and cast materials) escription J Cut-off Wheels 4 00x2,5x6 A30-BF J Cutting Wheel 5 25x2.5x22.23 A30-BF J Cutting Wheel 6 50x2.5x22.23 A30-BF J Cut Off Wheel 7 78x3x22.23 A30-BF J Cut Off Wheel 9 (230x3x22.32) A30-BF Features Semi Flexible Grinding Wheel : Aggressive and easy grinding for machining all steel, stainless steel, and non-ferrous materials (aluminium, copper, bronze, etc) escription J J J J J Semi Flexible Grinding Wheel 4 00X6 WA46-BF Semi Flexible Grinding Wheel 5 25X22.23 WA46-BF Semi Flexible Grinding Wheel 7 78X22.23 WA46-BF Semi Flexible Grinding Wheel 4 00X6 WA60-BF Semi Flexible Grinding Wheel 4 00X6 AC60-BF Features Superthin Cutting Wheel : For cutting thin-walled metal sheets, profiles, tubes, and beams made of stainless and acid resistant steel for the construction of machines, containers, vehicles and ships. escription J Superthin Cutting Wheel 4 00xx6 A60-BF Features Cut-off Wheels : Universal cut-off wheels for steel (2 fibers reinforcement) escription J Cut Off Wheels 4 350x2.8x25.4 A46-BF J Cut Off Wheels 6 400x3x25.4mm A46-BF Features Cutting Wheel : Universal cut-off wheels for steel ( fibers reinforcement) escription J Cutting Wheel 4 350x2.8x25.4mm A36-BF J Cutting Wheel 6 400x3.0x25.4mm A36-BF Features for Flap isc : Versatile tool for universal applications, suitable for angle grinders of any power escription J Flap isc 4 27A (00X6) ZA60-B J Flap isc 4 27A (00X6) ZA80-B J Flap isc 4 27A (00X6) ZA20-B 60 ABRASIVE PROUC

63