Single Element Precision Thickness Gauges, Transducers & Accessories - Price List Date: 01/01/18

Transcription

1 Single Element Precision Thickness Gauges, Transducers & Accessories - Price List Date: 01/01/18 The Precision Series of gauges are packaged in an all aluminum case making them the most durable gauges on the market. Models Features Part # Price US PX-7 Field Calibration of all materials, Interface-Echo Mode, Echo - Echo Mode, PLAS plastic mode, Alarm Mode, Differential Mode, and Data Output port. Z PX-7 DL PVX-B PVX Field Calibration of all materials, Interface-Echo Mode, Echo - Echo Mode, Alarm Mode, Diff Mode, Scan Mode, and Data Logger - Stores 1000 Readings in 10 groups of 100. Unit includes Transfer Cable & Software. Large Digits, time based B-Scan view, multiple calibration options, and selectable material list. View options (Digits & B-Scan w/scan Bar). Selectable mode options: Interface-Echo, Echo Echo, and Pulse-Echo options. Alarm Mode (Hi & Lo Limits), Hi Speed Scan Mode, multiple Languages, Setups (16 factory and 48 user defined), and Data Logger (Stores 12,000 Readings and waveforms). Probe options: Delay-Line, Pencil & Contact. Unit includes Transfer Cable & PC Software. A/B Scan waveform display, multiple calibration options, and selectable material list. Multiple view options (RF, Rectified, B-Scan, and Digits w/scan Bar). Adjustable pulse widths, selectable Interface- Echo and Echo Echo, and Pulse-Echo options, Alarm Mode (Hi & Lo Limits), Hi Speed Scan Mode, multiple Languages, Setups (64 user defined), and Data Logger (Stores 12,000 Readings and waveforms). Probe options: Delay-Line, Pencil & Contact. Unit includes Transfer Cable & PC Software. Z Z Z Kit Includes: Unit, standard 1/4" Delay Line Transducer (2 s 3/8 & 1/2 L) & Cable, Couplant, Manual, Certificate of Calibration, AA Batteries and Plastic Carrying Case. PC Software & Transfer cables included with DL and PVX gauges. Single Element Delay Line Transducers (**MHz is Included with gauge unless specified otherwise) 1

2 Materials Used: *Aluminum, *Titanium, *Steels, *Thin Plastics MHz Part # Comments Connector Entry Price $ T **Standard Microdot Side T Microdot Side PX Series Measurement Range Note: Acrylic delay tips will measure plastics if the material velocity is different from that of acrylic. If the velocities are similar, a graphite tip will need to be used. Measurement ranges in plastics will vary depending on the type of plastic measured. Diamete r MHz Mode Range (ST=Steel) (PL=Plastic) E-E.006 to.400 ST.060 to.750 ST Part # Delay Tip Length Crystal E-E.010 to.100 ST.060 to.500 ST PLAS.005 to.0 PL E-E.006 to.400 ST.060 to 1.00 ST.005 to.250 PL E-E.010 to.100 ST.060 to 1.00 ST PLAS.005 to.0 PL E-E.006 to.400 ST.060 to.750 ST 1/2 1/2 1/2 E-E.0 to.100 ST 2

3 PLAS.060 to.500 ST.005 to.0 PL E-E.006 to.400 ST.060 to.750 ST.005 to.250 PL 1/2 1/2 1/2 Single Element Delay-Line Continued PVX A/B SCOPE Measurement Range Note: Acrylic delay tips will measure plastics if the material velocity is different from that of acrylic. If the velocities are similar, a graphite tip will need to be used. Measurement ranges in plastics will vary depending on the type of plastic measured. Diamete r MHz Mode Range (ST=Steel) (PL=Plastic) 1/8 E-E.007 to.300 ST 1/8.0 to.400 ST 1/8.005 to.100 L Part # E-E.040 to.100 ST.060 to.500 ST PLAS.005 to.0 PL Note: Ranges were determined using standard 4340 steel calibration standards, and common plastic samples. These ranges may vary according to material type differences and surface conditions. X-132- X-132- X-132- Delay Tip Length Crystal 3/8 1/8 1/8 3/8 1/8 1/8 3/8 1/8 1/8 E-E.007 to.400 ST.0 to.500 ST.010 to.0 PL E-E.010 to.500 ST.0 to.500 ST.005 to.0 PL E-E.006 to.500 ST 1/2.025 to 1.00 ST 1/2 3

4 .005 to.0 E-E.010 to.500 ST.0 to.500 ST.005 to.250 PL E-E.006 to.400 ST.060 to.750 ST 1/2 E-E PLAS.0 to.100 ST.060 to.500 ST.005 to.0 PL E-E.006 to.400 ST.060 to.750 ST.005 to.250 PL 1/2 1/2 1/2 E-E.040 to.100 ST.060 to.500 ST PLAS.005 to.0 PL Note: Ranges were determined using standard 4340 steel calibration standards, and common plastic samples. These ranges may vary according to material type differences and surface conditions. Single Element Delay Line Pencil Transducers Materials Used: *Aluminum, *Titanium, *Steels, *Thin Plastics MHz Part # Comments Connector Entry Price $ 10 T /16 Tip Microdot Top T Right Angle Microdot Side

5 T /16 Tip Microdot Side Note: Should be used in conjunction with and A-Scan gauge model for best accuracy. PVX A/B SCOPE Measurement Range Note: Acrylic delay tips will measure plastics if the material velocity is different from that of acrylic. If the velocities are similar, a graphite tip will need to be used. Measurement ranges in plastics will vary depending on the type of plastic measured. Diamete r MHz Mode Range (ST=Steel) (PL=Plastic) Part # Delay Tip Length Crystal 10 E-E.006 to.300 ST 3/8 1/ to.400 ST 3/8 1/16 10 E-E.005 to.300 PL X-2-3/8 1/ to.300 PL X-752-3/8 1/16 10 E-E.006 to.300 ST 3/8 1/ to.500 ST 3/8 1/8 10 E-E.005 to.400 PL X-2-3/8 1/ to.400 PL X-752-3/8 1/8 E-E.006 to.100 ST 3/8 1/ to.250 ST 3/8 1/16 X-2- E-E.005 to.0 PL 3/8 1/16 X to.250 PL 3/8 1/16 E-E.006 to.0 ST 3/8 1/8.006 to.400 ST 3/8 1/8 X-2- E-E.005 to.100 PL 3/8 1/8 X to.0 PL 3/8 1/8 Note: Note: Ranges were determined using standard 4340 steel calibration standards, and common plastic samples. These ranges may vary according to material type differences and surface conditions. Single Element Contact Transducers - (cable not included) 5

6 Materials Used: *Aluminum, *Titanium, *Steels, *Plastics MHz Part # Comments Connector Entry Price $ 1/8 5 T Microdot Side /8 5 T Microdot Top /8 10 T Microdot Side /8 10 T Microdot Top T Microdot Side T Microdot Top T Microdot Side T Microdot Top T Microdot Side T Microdot Top / T Microdot Side / T Microdot Top /2 5 T Microdot Side /2 5 T Microdot Top 3.00 PVX A/B SCOPE Measurement Range Note: Ranges were determined using standard 4340 steel calibration standards, and common plastic samples. These ranges may vary according to material type differences and surface conditions. MHz Mode Range (ST=Steel) (PL=Plastic) Wearface Crystal 1/8 5 P-E.040 to 3.0 ST 1/8 1/8 5 E-E.0 to 3.0 ST 1/8 1/8 5 P-E.0 to.500 PL 1/8 1/8 10 P-E.040 to 3.0 ST 1/8 1/8 10 E-E.010 to 3.0 ST 1/8 1/8 10 P-E.0 to.400 PL 1/ P-E.050 to 3.0 ST 3/ E-E.040 to 3.0 ST 3/ P-E.040 to.650 PL 3/8 5 P-E.040 to 6.0 ST 3/8 5 E-E.0 to 3.0 ST 3/8 5 P-E.025 to.600 PL 3/8 10 P-E.025 to 6.0 ST 3/8 10 E-E.010 to 3.0 ST 3/8 10 P-E.0 to.500 PL 3/8 1/ P-E.075 to 10.0 ST 5/8 1/2 1/ E-E.100 to 3.0 ST 5/8 1/2 1/ P-E.065 to.750 PL 5/8 1/2 6

7 Accessory Items Instrument & Carrying Cases F DX-1 Nylon Instrument Case F DX-2/DL Nylon Instrument Case F MX & PX Series Nylon Case F MVX, PVX, MMX-7 Instrument Case F THOR Instrument Case 0.00 A Plastic Carrying Brief Case All Models E MX Carrying Case-No Couplant/Label E Plastic Carrying Case THOR only E Plastic Carrying Case Deluxe THOR Transducer Cables Custom Lengths: Available on request. N Single Lemo to Microdot PVX & PX N Single Lemo to Microdot PVX & PX N-1-00 Single Lemo to Micodot Single PVX & PX Couplant V oz bottle.00 V oz bottle V gallon

8 Calibration Blocks Part # Description Mat l Type Price $ X Step to Steel 5.00 X Step to Steel 5.00 Custom 5 Step to Steel 5.00 Custom 4 Step to Steel 5.00 Custom 5 Step to Aluminum 5.00 Custom 4 Step to Aluminum 5.00 Custom 5 Step to Stainless Steel Custom 4 Step to Stainless Steel Custom 5 Step to.500 Titanium 5.00 Custom 4 Step to 1.0 Titanium 5.00 X Carrying case Wood Custom 10 Step to Steel Custom 10 Step to Aluminum Custom 10 Step to Stainless Steel Custom 10 Step to 1.0 Titanium Custom Carrying Case Wood Custom 4 Step Thin Steel Custom 4 Step Thin Aluminum Custom 4 Step Thin Stainless Steel Custom 4 Step Thin Titanium Custom Carrying Case Wood Custom 10 Step Metric 1 to 10 mm 1018 Steel 5.00 Custom 10 Step Metric 1 to 10 mm 7075 Aluminum 5.00 Custom 10 Step Metric 1 to 10 mm 304 Stainless Steel Custom 10 Step Metric 1 to 10 mm Titanium Custom Carrying Case Wood Custom 10 Step Metric 2 to mm 1018 Steel 5.00 Custom 10 Step Metric 2 to mm 7075 Aluminum 5.00 Custom 10 Step Metric 2 to mm 304 Stainless Steel Custom 10 Step Metric 2 to mm Titanium Custom Carrying Case Wood Custom 10 Step Metric 2.5 to 25 mm 1018 Steel 5.00 Custom 10 Step Metric 2.5 to 25 mm 7075 Aluminum 5.00 Custom 10 Step Metric 2.5 to 25 mm 304 Stainless Steel Custom 10 Step Metric 2.5 to 25 mm Titanium Custom Carrying Case Wood Custom 8 Step Metric 1 to 8 mm 1018 Steel Custom 8 Step Metric 1 to 8 mm 7075 Aluminum Custom 8 Step Metric 1 to 8 mm 304 Stainless Steel Custom 8 Step Metric 1 to 8 mm Titanium

9 Custom Carrying Case Wood s - Delay Line Transducer Accessories F /4" Dia. x 3/8" L s Acrylic F /4" Dia. x 1/2" L s Acrylic X-132-1/8" Cone Tip Delay Line Acrylic /16" Cone Tip Delay Line Acrylic /4" Graphite Tip Delay (plastics) Graphite Graphite Cone Tip Delay Line Graphite X-2-1/16 Dia. x.450 L (Pencil) Acrylic X-752-1/8 Dia. x.450 L (Pencil) Acrylic Misc. Accessories A Extension Wand for Single Element Microdot Transducers Data Cables N foot RS232 ( DB-9 to lemo ) N USB to Serial Adapter Wireless Modules Custom Bluetooth Module (w/ integral antenna) PX