Duralac Jointing Compound DURALAC / FIXTECH SEALANTS. Fix2 Multipurpose Adhesive Sealant. 1 Adhesives and Sealants AMI Marine Catalogue

Transcription

1 Duralac Jointing Compound To Duralac is indispensable for the sealing of joints between dissimilar metals of all types including magnesium and its alloys. Particularly good for stainless steel fittings on alloy spars. It is also valuable for the protection of metals in contact with wood, synthetic resin compositions, leather, rubber and fabrics. AMI Code Supplier Code Capacity Duralac Green Tube 25ml Duralac Tube 115ml Duralac Can 250ml Duralac Can 500ml Duralac Can 1L DURALAC / FIXTECH SEALANTS Duralac Green is a chromate free jointing compound designed to inhibit electrolytic decomposition between dissimilar metals often called galvanic corrosion. It is a single pack, air setting product. Used correctly, Duralac Green prevents anodic decomposition. Fix2 Multipurpose Adhesive Sealant Fix2 is a high quality joint sealant with high adhesive strength. The product is chemically neutral and fully elastic, providing excellent primerless adhesion. Fix2 results in a flexible elastic rubber when fully cured; movement accommodation up to 20%. Fix2 is ideal for sealing and bonding of most common substrates where a flexible seal/joint is required, including: steel, aluminium, stainless, PVC, fibreglass, timber, mirrors, polystyrene, rubber etc. Hybrid Polymer, Density Skin Formation(*) Approx.10 Minutes (20 C/ 65% R.H) Tack Free Time (*) Approx. 4 hours (20 C/65% R.H) Cure Rate (*) 2-3mm/24hr (20 C/65%R.H) 40 ± 5 Shore A Change In Volume <2% Density 1.67 g/ml Maximum Deformation ± 20% Temperature Resistance (cured) - 40 C - 90 C Elastic Modulus 100% 0.75 N/mm² ( DIN 53504) Tensile Strength 1.8 N/mm² ( DIN 53504) Elongation At Break > 750% ( DIN53504) Application Temperature 5ºC - 35ºC MSP2WHL01ST White 125ml 1

2 DYNAMIC TRIM CONTROL SYSTEMS Fix25 Flexible Adhesive Sealant White 600ML Powerfix PFM25 Low Modulus conforms to standard ISO F-25LM and is a high quality single component joint sealant with high adhesive strength and excellent elasticity. It is based on MS-Polymer, is chemically neutral and fully elastic. For use in high movement joints in construction, automotive, marine and aerospace areas where a tough flexible rubber is required. Colour Curing Mechanism Specific Gravity Skin Formation Through Curing Speed Non-Yellowing White and Grey (available in Black on request) 1.45g/mL 10 Min PF25WHL06 White 600 (23 C - 65%r.h.) PFM25BKL06 Black mm in 24 hours (23 C - 65%r.h.) Change in volume < 2% Shore A 20 ± 5 Maximum deformation + 25% Elongation at break +750 % Elastic Modulus 100% 0.36 N/mm2 (DIN 53504, ASTM D412, Product only) Tear Strength 1.8 N/mm2 (DIN , ASTM D412, Product only) Temperature Resistance From 40 C to +100 C (Fully Cured) Packaging Cartridges 290mL, (As required) Sausages 600mL (In stock) Shelflife + 18 months stored in a cool and dry place Fix15 MSP15 Multi-purpose White (NON YELLOWING) 290ML Fix15 MSP15 is a high quality, single-component flexible adhesive joint sealant that is suitable for above and below the waterline applications. d on MS-PolymerÂ, it is chemically neutral and fully elastic. Suitable for use in low movement structural joints in marine, it is also suitable for automotive, aerospace, and construction applications where a tough flexible adhesive sealant is required. Fix15 MSP15 is available in Black, White. MS Polymer, Density, 1.55kg/m3 Skin Formation(*) Approx. 15 min (23 C/ 50% R.H) Tack Free Time (*) Approx. 4 hours (23 C/ 50% R.H) Cure Rate (*) 3mm/24hr (23 C/50%R.H) 48 Shore A Change In Volume <2% Specific Gravity 1.55 kg/m3 Maximum Deformation ± 20% Temperature Resistance (cured) -40 C -100 C Elastic Modulus 100% 1.1 N/mm² (ISO37, DIN 53504) Tensile Strength 2.2 N/mm² (ISO37, DIN 53504) Elongation At Break > 300% (ISO37, DIN53504) Shear Strength >1.6N/mm² (ISO37, DIN 53504) MSP15WHL03 White MSP15BKL03 Black MSP15WHL06 White MSP15BKL06 Black MSP15GYL03 Grey 290 2

3 FixSeal MSPCLEAR Multi-purpose 290ML FixSeal MSPCLEAR is a high quality single-component, flexible and 100% clear, extra strong adhesive joint sealant that is suitable for above and below the waterline applications. d on MS-Polymer it is chemically neutral and fully elastic. Suitable for use in low movement joints in marine, FixSeal MSPCLEAR is also suitable for automotive, aerospace and construction applications where a tough flexible clear adhesive sealant is required. Polymer 100% Clear Skin Formation(*) Approx. 12 minutes (23 C and 75% R.H) Cure Rate (*) 3mm/24Hrs (23 C and 75% R.H) 40 Shore A Change In Volume < 2% Specific Gravity 1.04g/ml Maximum Deformation ± 15% Temperature Resistance (cured) -40 C to 100 C Elastic Modulus 100% 1.0 N/mm2 Tear Strength 1.0N/mm2 Elongation At Break > 330% Shear Strength: 1.0n/mm MSPClearL03 Clear 290 Fix30 Timber & Tile Bonding Wall & Floor Adhesive Sealant Light Brown 600ML FIX30 is a solvent and water-free universal flexible adhesive. Suitable for bonding many types of timber, stone, marble, granite, and other products onto a variety of surfaces including concrete, steel, aluminium and fibreglass. It is an ideal exotic timber adhesive suitable for external and internal applications for marine, commercial and high quality residential timber decks. SMX Polymer Paste Chemical Cure Open 21 and 50% R.H (*) Approx minutes Adjustability 21 and 50% R.H (*) Approx. 10 minutes Specific Gravity (DIN 53479) Approx. 1.65g/cm Viscosity (Brookfield mpa.s) Approx (HBT A/10) Elongation at Break Approx. 300% Application Rate g/m2 depending on substrate Total Solids Content 100% (solvent free) Temperature Resistance (cured) -40 C to 90 C Durability Against Aging Good Set to Load Bearing Min. 12hrs Sanding Finishing Min. 12 Hrs Shear Strength: > 1.5 N/mm FF30BRL06 Lt Brown FF30WHT06 White 600 3

4 DYNAMIC TRIM CONTROL SYSTEMS Fix1DC Deck Caulk Fix1DC is a high quality single component adhesive sealant with a low viscosity, excellent adhesive properties designed for Teak and Synthetic Teak caulking. Fix1DC is moisture curing and forms a permanent elastic product. It is chemically neutral, suitable for use in marine, transport and construction areas, where a strong flexible UV and soap resistant rubber bond is required FIX1DCBKL06 Black 600 Hybrid Silane Paintability Not Paintable Skin Formation (*) 30 min (23 C & 75% R.H) Cure Rate (*) 2-3mm/24Hrs (23 C & 75% R.H) (Shore A) 37 Change In Volume < 2% Specific Gravity 1.30g/mL Maximum Deformation ± 30% Temperature Resistance (cured) -40 C to 100 C Elastic Modulus 100% 0.39 N/mm2 (DIN53504) Tensile/Shear Strength 1.20 MPa (DIN53504) Elongation At Break 300% (DIN53504) Application Temperature: From +5 C to 35 C Cork Composite Decking also available. See Deck & Hull section 4

5 FixSeal +MSP190 Structural & Window Glass Fix190 MSP190 (DNV Type Approved Product, Certificate No, K-3227, Germanischer Lloyd, AS/ NZS4020) is the ultimate high strength, one-component adhesive sealant based on MS-Polymer for structural bonding and direct glazing bonding and sealing. The product cures into a very strong but flexible rubber, with excellent adhesion to many marine substrates such as; timber, fibreglass, carbon fibre, epoxy coated products, glass, ceramic, aluminium, all stainless steels, copper, rough and treated metals, and most plastics (consult our technical department). MS Polymer Skin Formation(*) Approx. 12 min (23 C & 75% R.H) Cure Rate (*) 3-4 mm/24hrs (23 C & 75% R.H) 45±5 Shore A Change In Volume < 2% Specific Gravity 1.38g/ml Maximum Deformation 20% Temperature Resistance (cured) -40 C to +100 C Elastic Modulus 100% 1.0N/mm2 (ISO 8839) Tensile Strength > 1.6N/mm2 D 1002) MSP190WHL03FWT (fast cure) White MSP190BKL03FWT (fast cure) Black MSP190WHL06FWT (fast cure) White MSP190BKL06FWT (fast cure) Black MSP190WHL06 White MSP190BKL06 Black 600 FixSeal FS200 Black LM Silicone Sealant for Acrylic Windows 310ML FIX200 FS200 is a high strength, multi-blended unique moisture curing silicone that is 100% UV resistant and suitable for the harsh marine environment, for the fixing and sealing of organic and non-organic window panels, which is glass, acrylic, Perspex etc. Fix200 FS200 is available in Black only. Alkoxy Hybrid Skin Formation(*) 39 minutes (23 C / 50% R.H) Tack Free Time 3 Hours Protection From Sunlight Whilst Curing Minimum 7 Days (23 C / 50% R.H) 25 Shore A Change In Volume None Ozone Resistance Excellent UV Resistance Excellent Temperature Resistance (cured) -48 C to 93 C Joint Movement Capability ±50% Tensile Strength 2.45 MPa Modulus 0.24 MPa; at 50% Elongation Tear Strength 3.5kN/m FS200BKLM Black 310 5

6 DYNAMIC TRIM CONTROL SYSTEMS Fix8 Structural Grade Silicone Black 300ML Fix8 Black is a high quality architectural grade single component high modulus structural silicone sealant, neutral cure, that exhibits excellent physical properties. Suitable for typical sealing and structural bonding in glazing applications with metal, aluminium, Corian most plastics and fibreglass substrates. Hybrid Silane Paste Curing System, Neutral Cure Paint-ability Not Paintable Colours Black, White, Aluminium, Translucent (Other colours on request, MOQs apply) Skin Formation Aluminium minutes (230 C & 50%R.H) Translucent minutes (230 C & 50%R.H) Black minutes (230 C & 50%R.H) White minutes (230 C & 50%R.H) Tack Free Time 3 hours (230C & 50%R.H) Curing Rate 3mm/24 Hrs Density 1.34 g/cm3 Shrink None Elongation 300% (Shore A) 40±5 Tensile Strength >1.1 Mpa (ISO8339) Shear Strength > 1.5 Mpa Movement Capability 25% - 30% maximum FIX8BKL03 Black FIX8ALL03 Aluminium FIX8WHL03 White FIX8TPL03 Translucent 300 Fuel Master AC % Fuel Resistant Adhesive Sealant 500ML FAC240 Class B is a two-part polysulfide paste product with an open time of 30 minutes. FAC240 is a quick turn around rapid cure adhesive sealant for use in marine, automotive and aircraft fuel tanks. Polysulfide Thick paste Colour Grey : (white) Accelerator (black) FAC240PLS Curing System Chemical cure (2 pack) Skin Formation Ca. 30 minutes (23 C & 55% R.H.) Tack Free Time 5 Hrs (23 C & 55% R.H.) Curing Rate 6 Hrs to immersion, full strength 7 (23 C/55% R.H.) Change in Volume 5% Shore A 60 Maximum Deformation No cracking when bent 180 over a 3mm mandrel. Weight Loss No more than 6% loss of sealant compound after fluid Immersion Specific Gravity 1.61 gm/l Temperature Resistance -54 C until +121 C Intermittent exposure to 182 C Character Thixotropic, does not slump Elongation at Break +300% Tensile Strength >2.0 N/mm2 (ISO 8839) Shear Strength >2.0 N/mm2 (ASTM D1002) Thermal Rupture Resistance Does not blister or sponge Corrosion None Fungus Resistance Meets MIL-STD Shelf Life 9 months Non Volatile Content 98% 6

7 Fixtech Plastic Primer (Clear) 100ml Plastic Primer PR20 Plastic primer is a clear coloured primer for polyolefins oil-like plastics. These include difficult plastics to bond too such as polypropylene, polycarbonate, polyethylene, ABS. The PR20 is ideal to us on all plastic parts to provide superior adhesion even on sensitive plastics PR20L0100 Clear 100 Colour Curing System Skin Formation Flashpoint (*) Values may vary depending on environmental conditions Solvent Liquid Clear Moisture, Physical Drying and Absorption (20 C & 65% R.H) Ca. 60 minutes 1 C Open Cup Teak Cleaners and protectors Teak Cleaner is a 1 part cleaner that does not contain any acid or strong alkali. It is 100% waterbased and biodegradable, and is close to neutral ph. It cleans the teak and other exotic timbers extremely well, bringing colour back into the deck. Teak Colour Protector is a 1 part timber preservative colour impregnator that contains no oils, solvents or silicone and stops black spot mould TS100CS TSS00TC 5000 Teak Cleaner (5L) Water based PH Neutral clear protector 7

8 DYNAMIC TRIM CONTROL SYSTEMS FixIt Mate 100% Waterproof Timber Adhesive, Liquid 750gsm FIXIT MATE GLUE is a low viscosity, honey coloured, one-component polyurethane adhesive. It is a high strength, structural, 100% waterproof and cures in the presence of air & humidity. The product shows excellent adhesion on all types of timber, including damp timber, and is especially suited for marine timber construction, timber outdoor furniture, doors, shutters, window construction panels. However, it also adheres to carpet, concrete, brickwork, steel, aluminium, glass, polystyrene, and many other materials, (except for the plastics PP and PE) FMP Polyurethane Liquid Open Time(*) 30 Minutes Clamp Time (*) 1-2 Hrs Compression Strength 1Kg/cm2 Specific Gravity 1.1g/ml Water Resistance 100% to D4 (DIN EN 204) Temperature Resistance (cured) -30 C to 100 C Shear Strength > 10 N/mm2 Solid Contents 95% Coverage Ca. 150mL/m2 FixItMate 100% Waterproof Timber Adhesive Paste 310ML FIXIT MATE GRIP FMP 100 is a one-component, polyurethane based high strength, structural, 100% waterproof adhesive that cures in the presence of air & humidity.the product adheres to all types of timbers, seals voids, and is stronger than the grade of timber used anywhere FMP Polyurethane Skin Formation(*) 30 Minutes Clamp Time (*) 1-2 Hours Temperature Resistance -30 C to 100 C Water Resistance 100% to D4 (DIN EN 204) Specific Gravity 1.11g/Ml Breaking Strength > 10 N/mm2 (DIN EN 204) Solid Contents 100% (solvent free) (*) Values may vary depending on environmental conditions 8

9 Fix N Foam Gun Foam Adhesive Filler & Weatherproofer 750ml, Fix N Foam Gun Cleaner 500ml Fix n Foam gun foam is a closed cell, CFC-Free, polyurethane, self expandable foam adhesive filler for the professional applicator. The gun foam is unique with its bayonet click and fix fitting to a special gun that permits the regulation of the flow and the size of the foam from the gun. The foam from the nozzle is 95% expandable PUGLO75CF PUCLEANER PUGLO75CF 750 FG4 HD Caulking Tool FG4 Heavy Duty Caulking tool Polyurethane & Heavy Duty Caulking Tool for cartridges 150mL to 310mL. FG7 Aluminium Sausage Caulking tool Manual heavy duty tool, for 600ml sausages. FG8 Pneumatic Sausage caulking tool Pneumatic Caulking Tool for sausages up to 600mL, with pressure regulator. Fix N Foam Gun Applicator 1, Fix N Foam Gun Heavy Duty Applicator 1 Standard Applicator Made for Fixtech PU Gun Foam, (750ml). Simple and easy bayonet connection. Pneumatic Caulking Tool for sausages up to 600mL, with pressure regulator FG4 Heavy Duty FG7 Aluminum Sausage Caulking tool FG8 Pneumatic sausage Caulking tool 600 FG4 FG7 Heavy Duty Applicator Heavy duty version of the Click n Fix gun with metal trigger mechanism. AMI Code Supplier Code Qty PUHDGUN PUGUN 1 Standard FG8 Heavy Duty 9

10 DYNAMIC TRIM CONTROL SYSTEMS FixFill MP101 Extra Fine Gel Coat and Fine Repairs, White 1.0KG To MP101 is a two component, white, thixotropic polyester putty with extremely low shrinkage and water absorption. MP101 is flexible, easy to apply with a spatula, and easy to sand with excellent adhesion on fibreglass, steel, zinc plated steel, various sheet metal, stainless steel, timber, various composites, fibreglass and gel coats. Amine Pre-accelerated Polyester Resins Chemical reaction Open Time(*) 5 Minutes Can Be Sanded (*) Approx. 30 Minutes Ca 78 Shore D Application Temperature +10 C to 25 C Specific Gravity 1.88 g/ml Temperature Resistance (cured) 30 C to 115 C FixFill MP101 White 1000 Double Sided Window Glazing Med. Density Tape 9mm x 4.8mm 15m Double sided and single sided adhesive tapes with a variety of uses, particularly with glazing applications, and commonly used in the marine and construction industry. Used for shock and vibration absorption, the Fatboys are high strength, U.V, solvent, and weather resistant, and will adhere to stainless steel, most metals, plastics, and painted surfaces. AMI Code Supplier Code Size FGT094815DSBK FGT123225DSBK FAT100865GY FAT300865GY 1 10