800D Cummins Powered (SPECIALS) Parts Manual

Transcription

1 800D Cummins Powered (SPECIALS) Parts Manual 0600 Rev. 0 CD -Rom Part No. 0

2 This manual is furnished with each new TENNANT Model 800D Cummins powered machine. This manual consists of the How To Use This Manual; Standard Parts; Options; Breakdowns; and Cross Reference sections. MACHINE DATA Please fill out at time of installation for future reference. Machine Model Number D Machine Serial Number -- Machine Options -- TENNANT Representative/phone no. -- Customer ID Number -- Date of Installation -- Manual Number Revision: 0 Published: --02 Copyright E 2000, 200, 2002 TENNANT, Printed in U.S.A.

3 This section on HOW TO USE THIS MANUAL will tell you how to: -- Find important machine information for ordering correct repair parts. -- Find TENNANT part numbers. -- Order TENNANT parts and supplies. HOW TO USE THIS MANUAL HOW TO USE THIS MANUAL IMPORTANT INFORMATION When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model number of your machine is on the side of the machine. The serial number of your machine is printed on the machine data plate located as shown. 800D 0600 ( -00) -

4 HOW TO USE THIS MANUAL FINDING A TENNANT PART NUMBER This manual contains the following sections: -- HOW TO USE THIS MANUAL -- STANDARD PARTS -- OPTIONS -- BREAKDOWNS -- ENGINE BREAKDOWN -- CROSS REFERENCE The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order: -- General wear parts. -- Machine frame and related parts. -- Machine propelling system. -- Sweeping components. -- Electrical parts. The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information: -- Ref -- column refers to the reference number on the parts illustration. -- indicates the part is an assembly. -- indicates the part is included in the assembly listed just before it. -- TENNANT Part No. -- column lists the TENNANT part number for the part. -- Serial Number -- column indicates the set of machines the part number is applicable to. Serial numbers change when the machine design has been modified. The most current design of the machine is shown in the main illustration, older designs are boxed in a corner of the illustration. -- Description -- column is a brief description of the part. -- Qty. -- column lists the quantity of that part used in that area of the machine D 0600 ( -00)

5 HOW TO USE THIS MANUAL NOTE: If a service kit is installed on your machine, be sure to keep the INSTRUCTION BULLETIN which came with the kit. It contains repair parts numbers needed for ordering future parts. NOTE: Fasteners used in this machine may be metric or non-metric. Take care when replacing hardware to replace with same thread size. PLACING AN ORDER Orders may be placed by phone, fax, or by mail. Phone orders may need written confirmation. Follow the steps below to insure prompt delivery:. Identify the model number of your machine. 2. Identify the serial number of your machine.. Find the part number of the part you need. Do not order by page number or reference number. If you are not able to find the part number, call your TENNANT representative for help or send the old part as a sample.. Determine the quantity of the part you need. 5. Provide the following company information: -- Company name -- Customer ID Number -- Shipping address -- Billing address -- First and last name of person ordering parts -- Telephone number -- Purchase order number 6. Provide definitive shipping instructions. 800D 0600 ( -00) -

6 HOW TO USE THIS MANUAL Any claim for loss or damage to a shipment in transit should be filed promptly with the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicates items back ordered. If parts received are suspected to be incorrect or defective, please contact the TENNANT representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required D 0600 ( -00)

7 STANDARD PARTS SECTION 2 Contents Page Contents Page Fig. -- Recommended General Maintenance Items Fig Replacement Brushes Fig. -- Main Frame, Skirt and Seals Group Fig. -- Left Brush Door Group Fig Right Brush Door Group Fig Operator Station Group Fig Engine Cover and Lintel Group Fig Engine Side Door Group Fig Hydraulic Cooler, Filter and Rear Door Group Fig Hopper Lift Arms Group Fig. -- Hopper Lift Cylinders Group Fig Hopper Group Fig. -- Hopper Door Group Fig. -- Hopper Cover Group Fig Hopper Bumper Group Fig Filter Shaker Group Fig Pressure Switch Group Fig Engine and Mount Group Fig Engine Compartment Floor Group Fig Throttle Group Fig Alternator Group Fig Engine Oil Filter Group Fig Air Cleaner Group Fig Muffler Group Fig Fuel Tank Group Fig Radiator Hose Group Fig Radiator and Cooling Fan Group Fig Battery Group Fig Rear Wheel Drive Group Fig Front Wheels and Brakes Group Fig. -- Wheel Assembly Fig Brake Pedals Group Fig. -- Directional Pedal Group Fig. -- Hydraulic Pumps Group Fig Hydraulic Schematic Fig Hydraulic Hose Group ( ) Fig Hydraulic Hose Group ( ) Fig Hydraulic Reservoir Group Fig Hydraulic Solenoid Valve Group Fig Hydraulic Lift Valve Group Fig. -- Side Brush Group Fig Side Brush Lift Group Fig. -- Main Brush Drive Group Fig. -- Main Brush Lift Group Fig Main Brush Adjustment Group Fig Vacuum Fan Impeller Group Fig Vacuum Fan Motor Group Fig Steering Group Fig Instrument Panel Assembly Fig Circuit Breaker and Relay Group Fig Wire Harnesses Group Fig Label Group D 0600 ( -02) 2-

8 STANDARD PARTS Fig. - Recommended General Maintenance Items 800, D Ref. Tennant Part No. Machine Serial Number Description Qty. o 7762 ( ) Maintenance Kit, Skirts 7870 ( ) Skirt, Brush Door ( ) Skirt, Brush Door ( ) Strip, Retainer, Skirt ( ) Skirt, Seal, Main Brush ( ) Channel, Retainer, Seal, Rear 6295 ( ) Blade, Deflector ( ) Strap, Retainer, Seal 500 ( ) Chain, Link#2/0, 7Links o 7902 ( ) Maintenance Kit, Skirts ( ) Seal, Pan, Top 6920 ( ) Channel, Retainer 765 ( ) Seal, Brush Comp, Side ( ) Skirt, Front, Indoor ( ) Element, Fltr, Oil, Engine 075 ( ) Filter, Fuel, Element ( ) Element, Filter, Air ( ) Element, Filter, Safety 065 ( ) Element, Filter, Air 065 ( ) Element, Filter, Safety 06 ( ) Breather, Hyd 0Mic No DS 6 ( ) Strainer--Hyd Suction ( ) Element, Fltr, Oil ( ) Fluid, Hyd Oil, SHP 5/0 5Gal D 0600 ( -02)

9 STANDARD PARTS Fig. 2 - Replacement Brushes Ref. Tennant Part No. Machine Serial Number Description Qty. 526 ( ) Brush--Sweep Spl--50Lg -- 8Dr--Poly 52 ( ) Brush--Sweep Spl--50Lg--8Dr--P&W 527 ( ) Brush--Sweep Spl--50Lg--8Dr--Wire 525 ( ) Brush--Outsd Spl--50Lg -- 8Dr--Poly 56 ( ) Brush--Patrl Spl--50Lg -- Qr--Nyl 52 ( ) Brush--Sweep Spl--50Lg--2Sr--Nyl o ( ) Brush--Side Swp --26 D--Assy--Nyl 502N ( ) Brush--Side Swp --26 D--Nyl 596 ( ) Adaptor Weldm., Side Brush.0B o ( ) Brush--Side Swp --26 D--Assy--Fltw 552 ( ) Brush--Side Swp --26 D--Fltw 596 ( ) Adaptor Weldm., Side Brush.0B o ( ) Brush--Side Swp --26 D--Assy--Poly 7058 ( ) Brush--Side Swp --26 D--Poly 596 ( ) Adaptor Weldm., Side Brush.0B 800D 0600 ( -00) 2-

10 STANDARD PARTS Fig. - Main Frame, Skirt and Seals Group D 0600 ( -00)

11 STANDARD PARTS Fig. - Main Frame, Skirt and Seals Group D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Frame ( ) Panel Wldt, Rear, Rh 777 ( ) Panel Wldt, Rear, Lh ( ) BumperWldt, Rear ( ) Bar, Frame ( ) Bumper, Corner, Mach ( ) Plate, Guide, Bumper ( ) Channel, Mounting ( ) Spring, Recirculation ( ) Blade, Deflector ( ) Strap, Retainer, Seal ( ) Skirt, Seal, Main Brush ( ) Channel, Retainer, Seal,Rear 8225 ( ) Seal Foam Rbr.75.5W 2.L ( ) Insulation, S/Foam ( ) Chain,Link#2/0,7Links ( ) Seal, Pan, Top ( ) Channel, Retainer ( ) Shield, Dust ( ) Strip, Retainer, Shield, Rh ( ) Insulation, S/Foam ( ) Insulation, S/Foam.0X.0X ( ) Insulation, S/Foam.5X.0X ( ) Insulation, S/Foam ( ) Seal o ( ) Light Assy Stop/Red 2V--. A ( ) Bulb, 2V.5A Cp # ( ) Grommet,Rbr,0.50Id,For.25Matl ( ) Pad, Tread ( ) Clip, Pine--Tree.250h Plastic 0 06 ( ) Firewall Brkt, Lower 0628 ( ) Firewall, Lower ( ) Firewall, Upper 7568 ( ) Flap, Rubber 800D 0600 ( -00) 2-5

12 STANDARD PARTS Fig. - Left Brush Door Group D 0600 (8-0)

13 STANDARD PARTS Fig. - Left Brush Door Group Ref. Tennant Part No. Machine Serial Number Description Qty. 680 ( ) Door Wldt, Brush, Lh ( ) Skirt, Brush Door 705 ( ) Strip, Retainer, Skirt 5889 ( ) Latch, Hook (Supplier S Rh) ( ) Bolt, Latch ( ) Seal, Door, Brush, Lh ( ) Seal, Brush Comp, Side ( ) Rivet, Plastic ( ) Strip, Retainer, Seal, Side ( ) Angle, Retainer, Seal 768 ( ) Strip, Retainer, Seal, Lh ( ) Skirt, Brush Door 7888 ( ) Skirt, Front, Indoor 7062 ( ) Seal, Brush Door 5 78 ( ) Fender Washer 6 800D 0600 ( -00) 2-7

14 STANDARD PARTS Fig. 5 - Right Brush Door Group D 0600 ( -00)

15 STANDARD PARTS Fig. 5 - Right Brush Door Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Door Wldt, Brush, Rh ( ) Skirt, Brush Door 705 ( ) Strip, Retainer, Skirt 588 ( ) Latch, Hook (Supplier s Lh) ( ) Bolt, Latch ( ) Seal, Door, Brush, Rh ( ) Seal, Brush Comp, Side ( ) Rivet, Plastic ( ) Strip, Retainer, Seal, Side ( ) Angle, Retainer, Seal 769 ( ) Strip, Retainer, Seal, Rh ( ) Skirt, Brush Door 7888 ( ) Skirt, Front, Indoor 706 ( ) Seal, Brush Door 5 78 ( ) Fender Washer 6 800D 0600 ( -00) 2-9

16 STANDARD PARTS Fig. 6 - Operator Station Group D 0600 ( -02)

17 STANDARD PARTS Fig. 6 - Operator Station Group 52 - D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Panel Wldt w/label o ( ) Seat, Suspension 6 ( ) Armrest, Black 076 ( ) Sleeve,.85B.62D.62 Cd.Cad ( ) Bracket, Oper Comp ( ) Dampner, Engine 7 0 ( ) Washer,.5B.88D.2Hard Zn ( ) Panel, Cover, Access ( ) Panel, Engine Access ( ) Bumper, Rubber 7695 ( ) Tread, Floormat, Rubber ( ) Rod, Seat ( ) Plugbtn.25h.2 Max Blacknyl 7799 ( ) Clip, Pine--tree.26h Plastic ( ) Seal, 8.0 Lg ( ) Seal, Bulb, Sd Lg ( ) Seal, 7.00 Lg ( ) Seal ( ) Seal,Foam Rbr,..75W.8L ( ) Molding, Trim --Ga ( ) Molding, Trim --Ga ( ) Seal, Rod, Adjuster o 769 ( ) Sealing Kit, Operator Comp ( ) Insulation, S/Foam, Seat ( ) Seal, Dust ( ) Bumper, Rubber ( ) Seal, Bulb, Sd Lg ( ) Bar, Retainer ( ) Washer--Flt.25 Fender Rltd ( ) Rivet, Plastic.25D X ( ) Molding, Trim 6Ga&Thinnr ( ) Plugbtn.75h Blacknyl ( ) Panel, Fuel Inlet w/label 868 ( ) Block, Fuse 879 ( ) Fuse, 0 Amp ( ) Relay, 2Vdc 70A Cont Spst ( ) Trim ( ) Insulation ( ) Insulation ( ) Plug ( ) Panel, Support, Seat 800D 0600 ( -02) 2-

18 STANDARD PARTS Fig. 7 - Engine Cover and Lintel Group D 0600 ( -00)

19 STANDARD PARTS Fig. 7 - Engine Cover and Lintel Group 52 - D Ref. Tennant Part No. Machine Serial Number Description Qty. 62 ( ) Lintel, Rear ( ) Tube Wldt, Brace, Center 8052 ( ) Bracket, Brace Center ( ) Lintel, Main ( ) Strip, Spacer ( ) Cover Wldt, Engine ( ) Foam, Accustic ( ) Hinge ( ) Bracket Wldt, Gas Spring 0 5 ( ) Washer,.B.69D.06Nylon ( ) U--Nut Clip, M ( ) Seal, Bulb, Sd Lg 220 ( ) Plate, Support, Cover Se 5992 ( ) Latch, Bolt ( ) Latch, Hook, Rh ( ) Insulation, S/Foam.5T 7.0X ( ) Seal,Foam Rbr,.62.62W 2.5L ( ) Spindle, Adjustment ( ) Horn, 2 Volt ( ) Wire, Lead ( ) Rod, Support Cover ( ) Panel Wldt, Cover Engine ( ) Cover, Eng, Top ( ) Panel, Vacuum Duct ( ) Bracket, L 2.0L Hood Support ( ) Insulation, S/Foam,.8T 7.0X ( ) Insulation, S/Foam,.8T 8.0X ( ) Insulation, S/Foam,.8T 6.5X ( ) Insulation, S/Foam,.8T 2.0XX ( ) Panel, Corner, Eng Cover 5585 ( ) Scr--Hxfmgm 5X0.8 6 pltd ( ) Plugbutton.88H Blacknyl 7799 ( ) Clip, Tree ( ) Seal 800D 0600 ( -02) 2-

20 STANDARD PARTS Fig. 8 - Engine Side Door Group D 0600 ( -02)

21 STANDARD PARTS Fig. 8 - Engine Side Door Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Door Wldt, Engine 2 65 ( ) Hinge, W/Pin ( ) Hinge, W/Pin 655 ( ) Hinge ( ) Latch, Hook Rh ( ) Angle, Bolt, Latch ( ) Latch, Bolt ( ) Seal,Foam Rbr,.62.62W 2.5L ( ) Seal, 8.0 Lg ( ) Panel, Louver 0652 ( ) Rivet, Pop ( ) Screw, Pan, M 6 X.0 X 0,.8 85 ( ) Bumper, Rbr,.5d h ( ) Nut, Hex, Lock, M06 X.0, Nl 800D 0600 ( -02) 2-5

22 STANDARD PARTS Fig. 9 - Hydraulic Cooler, Filter and Rear Door Group D 0600 ( -00)

23 STANDARD PARTS Fig. 9 - Hydraulic Cooler, Filter and Rear Door Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Door Wldt, Rear ( ) Bumper, Rubber 69 ( ) Cooler--Hyd 2260 ( ) Ftg--Hyd Str Jm2/Om ( ) Isolator--Vibration ( ) Latch ( ) Plate, Striker ( ) Lanyard Assy ( ) Sleeve, Nyl 6.0 L 2 o ( ) Filter Assy, Spin--on 6522 ( ) Filter Element 2 68 ( ) Ftg--Hyd E90 Jm2/om ( ) Sender, Filter, Hydraulic 800D 0600 ( -00) 2-7

24 STANDARD PARTS 5 Fig. 0 - Hopper Lift Arms Group D 0600 ( -00)

25 STANDARD PARTS Fig. 0 - Hopper Lift Arms Group NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Arm Wldt, Hopper Lift w label ( ) Bearng--Journal 776 ( ) Pin,.500 0Dx7.8, Drilled ( ) Bearng--Journal ( ) Plate, Pin Retainer ( ) Pin Weldt ( ) Bar, Arm, Lower, Machining ( ) Bearing--Journal ( ) Pin Weldt ( ) Pin ( ) Arm, Safety W/Label ( ) Ring, Retaining, Ex.5 Dia Hd 767 ( ) Pin ( ) Switch, Roller ( ) Plate, Link 800D 0600 ( -00) 2-9

26 STANDARD PARTS 8 Fig. - Hopper Lift Cylinders Group D 0600 ( -00)

27 STANDARD PARTS Fig. - Hopper Lift Cylinders Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. 855 ( ) Pin Wldt ( ) Cylinder, Hyd.0B.5S 2500 (See Breakdowns) 752 ( ) Ftg--Hyd E90 Jm06/Om ( ) Ftg--Hyd Str Jm0/Om ( ) Ftg--Hyd Rst Jm0/ ( ) Ftg--Hyd E90 Jm0/Jf ( ) Bearing, Journal ( ) Pin,.25 Odx.50, Grooved ( ) Retaining Ring--External,.25D ( ) Bar, Cylinder End 5796 ( ) Bearing--Journal ( ) Pin,.250 Od X ( ) Plate, Pin Retainer ( ) Ftg--Hyd E90 Jm0/Om ( ) Pin,.00 Odx.50, Drilled ( ) Spacer ( ) Clamp--Cable,.69Dia. 62Wth ( ) Plate, Spacer 2 o ( ) Cylinder, hyd. 2.0 B.9S ( ) Bearing--Journal 2 800D 0600 ( -00) 2-2

28 STANDARD PARTS Fig. 2 - Hopper Group D 0600 ( -02)

29 STANDARD PARTS Fig. 2 - Hopper Group Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Hopper Wldt ( ) Panel, Permafilter, Upper ( ) Seal, Dust 6668 ( ) Bar, Retainer, Dust Seal ( ) Angle, Dust Seal ( ) Panel, Hopper, Bottom, Lh ( ) Panel, Bottom, Hopper, Rh ( ) Skirt, Lip ( ) Skirt, Lip ( ) Angle, Retainer, Lip 706 ( ) Panel, Deflector, Dirt, Rh ( ) Panel, Deflector, Dirt, Lh 7772 ( ) Bracket, Mtg, Skirt 777 ( ) Skirt, Deflector ( ) Strip, Retainer, Skirt, Front ( ) Strip, Hopper ( ) Duct, Inlet, Vac Fan ( ) Plate, Cover ( ) Plate, Cover ( ) Seal, Foam, Urethane Covered ( ) Seal, Foam, Urethane Covered ( ) Cover, Permafilter 2 800D 0600 ( -02) 2-2

30 STANDARD PARTS Fig. - Hopper Door Group D 0600 ( -00)

31 STANDARD PARTS Fig. - Hopper Door Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. 920 ( ) Ftg--Hyd E90 Jm0/Jf ( ) Door Wldt, Hopper 798 ( ) Sleeve, Pivot, Door ( ) Washer,.05B.75D.Hrs ( ) Bearing, Journal ( ) Cylinder, Hyd 2.0B 8.0S ( ) Ftg--Hyd E90 Jm0/Om ( ) Ftg--Hyd E90 Jm0/Om ( ) Pin ( ) Pin, Clevis.50 Dia X 2.25 Lg ( ) Bracket, Mtg, Ftg 2 92 ( ) Ftg--Hyd Tee Jm0Jmjm 2 800D 0600 ( -00) 2-25

32 STANDARD PARTS Fig. - Hopper Cover Group D 0600 (8-0)

33 STANDARD PARTS Fig. - Hopper Cover Group NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Bracket, Mounting, Headlamp ( ) Bumper, Rubber ( ) Hinge 2 08 ( ) Bearing, Flange.625 Bore ( ) Tube, 0.62D.B 2., Stl ( ) Spring--Gas, Engine Cover ( ) Panel, Headlight ( ) Hinge ( ) Sleeve,.20B.2D.9 Lc Stl ( ) Pin Wldt, Latch 5852 ( ) Headlight, 2V.Rect ( ) Panel Wldt, Fender, Rh 77 ( ) Bearing, Nylon ( ) Panel Wldt, Fender, Lh ( ) Sprng,Tens,0.965Odx.09Wire.L ( ) Latch, Hook, Rh, Single Catch ( ) Bracket, Rh ( ) Bracket, Lh ( ) Cover Assy, Hopper ( ) Bumper, Cover, Hopper ( ) Angle, Mount ( ) Magnet, Drive Brush ( ) Seal, Urethane Covered Foam ( ) Seal, Urethane Covered Foam ( ) Seal, Urethane Covered Foam ( ) Handle, Container ( ) Screw, Pan, m ( ) Nut, Hex Lock m D 0600 (8-0) 2-27

34 STANDARD PARTS Fig. 5 - Hopper Bumper Group D 0600 ( -00)

35 STANDARD PARTS Fig. 5 - Hopper Bumper Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. 857 ( ) Bumper Wldt, Sppt, Hopper, Rh ( ) Support Wldt, Sppt, Hopper Lh 8620 ( ) Bumper Wldt, Lh 8622 ( ) Bumper Wldt, Rh ( ) Guard Wldt, Hopper ( ) Bracket Wldt, Mtg, Headlight ( ) Latch, Bumper 2 800D 0600 ( -00) 2-29

36 STANDARD PARTS Fig. 6 - Filter Shaker Group D 0600 ( -00)

37 STANDARD PARTS Fig. 6 - Filter Shaker Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Panel Wldt, Shaker ( ) Ferrule ( ) Disc ( ) Filter Assy, Fine, Hopper (option) 2 o 6297 ( ) Filter Assy, (standard) ( ) Screen, Filter ( ) Ring, Isolator, Outer, Rbr ( ) Bushing, Isolator ( ) Motor, Electric,.6 Vdc ( ) Clamp, Mtg, Motor, Upper ( ) Shaft, Eccentric ( ) Bearing ( ) Link, Eccentric 2 o 777 ( ) Shaker Bar Replacement Kit 2 62 ( ) Bearing, Fiberglide.50 X ( ) Sleeve, Bearing ( ) Bearing, Thrust -- Fiberglide ( ) Shoulder Screw ( ) Spring ( ) Ring Wldt, Shaker ( ) Guide ( ) Ring Wldt, Mtg, Filter ( ) Ring, Retaining, Ext ( ) Seal Kit, Shaker Panel ( ) Clamp--Wormdrive, D ( ) Seal, Dust ( ) Set Screw ( ) Bar, Shaker Stem 2 800D 0600 ( -00) 2-

38 STANDARD PARTS 5 Fig. 7 - Pressure Switch Group D 0600 ( -00)

39 STANDARD PARTS Fig. 7 - Pressure Switch Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Switch, Pressure ( ) Ftg, Breather 0607 ( ) Ftg--Brs Str Bm0/Pm ( ) Ftg,Bulkhead--Barb Wh 07X 5 86 ( ) Strain,Relief ( ) Hose, Vac, Rubber ( ) Grommet,Rbr,0.62Id,For.06Matl ( ) Tie, Cable.75D Max 7.50Lg ( ) Clamp, Cable, Stl, 0.d X 0.62w, h ( ) Washer 800D 0600 ( -02) 2-

40 STANDARD PARTS Fig. 8 - Engine and Mount Group D 0600 ( -00)

41 STANDARD PARTS Fig. 8 - Engine and Mount Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 056 ( ) Engine Assy, Die (See Cummins Engine Parts Catalog) ( ) Coupling Flywheel 07 ( ) Housing, Flywheel, Mach 70 Pk 075 ( ) Bracket Wldt, Mtg, Engine Rear ( ) Wire Ass y--elect.,ground ( ) Bracket, Mtg, Engine Front Rh ( ) Bracket, Mtg, Engine Front Lh ( ) Washer,.52B 2.D.Hr.Znc ( ) Shutdown, Three way ( ) Switch, Pressure Oil 076 ( ) Bracket, Mtg, Engine Front Rh ( ) Bracket, Mounting, Eng, Rear 6695 ( ) Isolator, Mounting 775 ( ) Bracket, Mounting, Eng Rear Rh 5 77 ( ) Bracket, Mounting, Eng,Rear Lh ( ) Ftg--Hyd Str ( ) Ftg--Hyd Cap Jf ( ) Washer ( ) Solenoid ( ) Ftg--Hyd E ( ) Ftg--Hyd E ( ) Hose, Hyd ( ) Ftg--Hyd Str ( ) Ftg--Hyd E ( ) Draincock ( ) Wire Ass y--blk ( ) Ftg--Tee--Brass ( ) Ftg--Brass, E ( ) Ftg--Str ( ) Send Unit, Temp Water.62Unf 800D 0600 ( -00) 2-5

42 STANDARD PARTS Fig. 9 - Engine Compartment Floor Group D 0600 ( -00)

43 STANDARD PARTS Fig. 9 - Engine Compartment Floor Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 022 ( ) Bracket, Floor Panel, L.H ( ) Bracket, Floor Panel, R.H. 022 ( ) Panel, Floor 022 ( ) Panel, Diesel ( ) Plate, Bottom, Floor ( ) Panel, Side, Floor ( ) Cover, Rubber, Lower ( ) Floor, Engine ( ) Cover, Engine, Floor ( ) Plate, End 02 ( ) Plate, Floor, Center ( ) Plate, Floor 025 ( ) Bracket, Engine Floor 800D 0600 ( -00) 2-7

44 STANDARD PARTS Fig Throttle Group D 0600 ( -00)

45 STANDARD PARTS Fig Throttle Group D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Cable, Throttle ( ) Pin, Clevis ( ) Handle 6995 ( ) Spring,Comp. 5 6 ( ) Washer ( ) Grip Vinyl ( ) Seal, Throttle Handle ( ) Washer, Flat ( ) Bracket, Mtg, Throttle Cable ( ) Screw, Pan 066 ( ) Clip, Throttle ( ) Bracket, Mtg, Filter 92 ( ) Nut, Hex ( ) Screw, Hex ( ) Nut, Hex 800D 0600 ( -00) 2-9

46 STANDARD PARTS 2 6 Fig. 2 - Alternator Group D 0600 ( -00)

47 STANDARD PARTS Fig. 2 - Alternator Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 069 ( ) Bracket, Mtg, Alternator ( ) Alternator, 05Amp, Delco 827 ( ) Wire--Ground, Alternator 2 ( ) Washer--Loc Int--Ext.8 Pltd ( ) Boot, Electric (Altern 6 66 ( ) Boot, Str.2Id.2H.25L 2 800D 0600 ( -00) 2-

48 STANDARD PARTS Fig Engine Oil Filter Group D 0600 ( -02)

49 STANDARD PARTS Fig Engine Oil Filter Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 68 ( ) Ftg--Hyd E ( ) Ftg--Hyd E5 08 ( ) Hose--Hyd 0686 ( ) Hose--Hyd ( ) Sleeve--Nyln ( ) Sleeve--Nyln ( ) Clamp ( ) Base, Filter, Engine Oil ( ) Element, Fltr, Oil, Engine 800D 0600 ( -02) 2-

50 STANDARD PARTS Fig. 2 - Air Cleaner Group D 0600 ( -00)

51 STANDARD PARTS Fig. 2 - Air Cleaner Group D Ref. Tennant Part No. Machine Serial Number Description Qty. o ( ) Filter, Air, ( ) Element, Air Cleaner ( ) Element, Filter Safety ( ) Band,Mtg ( ) Indicator Service Air Filter 6 SP026 ( ) Filter, Pre--Cleaner, Turbo II ( ) Tube, Intake ( ) Clamp, Spring & Screw ( ) Rubber Hump ( ) Ring, Rubber 5528 ( ) Bushing, Rubber 2 78 ( ) Washer, Fender 068 ( ) Plate, Hood 067 ( ) Bracket, Hood Seal ( ) Insulation 800D 0600 ( -00) 2-5

52 STANDARD PARTS Fig. 2 - Muffler Group D 0600 ( -00)

53 STANDARD PARTS Fig. 2 - Muffler Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 057 ( ) Tube, Exhaust 2 05 ( ) Muffler, Exhaust 28 ( ) Bracket, Tail Pipe 26 ( ) Bracket, Tail Pipe ( ) Isolator--Vibration ( ) Washer--Loc Int--Ext.25 Pltd ( ) Clamp--Muffler 800D 0600 ( -00) 2-7

54 STANDARD PARTS Fig Fuel Tank Group D 0600 (6-00)

55 STANDARD PARTS Fig Fuel Tank Group D Ref. Tennant Part No. Machine Serial Number Description Qty. o 067 ( ) Tank, Fuel ( ) Fuel Cap, Protectoseal 27 ( ) Send---Unit 272 ( ) Gasket, Sending Unit Tc ( ) Mount, Cable Tie ( ) Tie, Cable ( ) Strap ( ) Plate, Mtg ( ) Clamp, Cable ( ) Hose, Fuel ( ) Fitting, Brass, Str ( ) Fitting, Brass, Str 0572 ( ) Tube Fuel 2708 ( ) Fitting, Brass, Elbow o ( ) Filter, Fuel 075 ( ) Element, Filter, Fuel ( ) Tube Fuel ( ) Fitting, Brass, Elbow ( ) Ftg, Hyd, Str ( ) Hose ( ) Hose 2 8 ( ) Clamp ( ) Banjo ( ) Fitting, Str 800D 0600 (6-00) 2-9

56 STANDARD PARTS Fig Radiator Hose Group D 0600 ( -00)

57 STANDARD PARTS Fig Radiator Hose Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 057 ( ) Tube, Coolant ( ) Hose, Rubber, Elbow 5 ( ) Clamp--Wormdrive ( ) Tube, Coolant ( ) Hose, Rubber, Elbow 6 79 ( ) Hose ( ) Clamp--Wormdrive ( ) Hose, Radiator 2 800D 0600 ( -00) 2-5

58 STANDARD PARTS Fig Radiator and Cooling Fan Group D 0600 ( -02)

59 STANDARD PARTS Fig Radiator and Cooling Fan Group D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Duct, Rear o 2 70 ( ) Radiator, Row, 6 Fin 0672 ( ) Cap Radiator 505 ( ) Drain Cock,.25Npt Wh#20 Angl ( ) Seal, Duct ( ) Seal, Fan, Vac Outlet ( ) Bushing, Isolator ( ) Ring, Isolator, Outer Rbr ( ) Plate, Spring -- Side Brush ( ) Spacer ( ) Shroud Wldt, Fan, Rad w/label ( ) Bracket, L, 2.20,2.00,.8T,. 522 ( ) Isolator--Vibration ( ) Channel Wldt, Fan Motor ( ) Motor--Hyd, Gear In 0.0 (See Breakdowns) ( ) Ftg--Hyd E90 Jm06/Om ( ) Ftg--Hyd Tee Jm0Omjm ( ) Fitting, Hyd, Tee, Jm06/Jf06/Jm ( ) Ftg--Hyd Str Jm06/Om ( ) Fan, Radiator ( ) Bracket, Mtg, Oil Filter ( ) Nut, Hex, Std,.--2, ( ) Tank 2 02 ( ) Cap ( ) Hose 25 8 ( ) Clamp, Wormdrive ( ) Bracket, Tank Mtg ( ) Clamp, Wormdrive ( ) Three Way Shutdown Sensor ( ) Fitting, Hyd, Str, Jm06/Om0 800D 0600 ( -02) 2-5

60 STANDARD PARTS Fig Battery Group D 0600 ( -00)

61 STANDARD PARTS Fig Battery Group D Ref. Tennant Part No. Machine Serial Number Description Qty. 06 ( ) Bracket, Mtg, Battery ( ) Bracket, Battery 0580 ( ) Battery, 2V, Wet 059 ( ) Cable, Battery, Pos ( ) Cable, Battery, Neg 800D 0600 ( -00) 2-55

62 STANDARD PARTS Fig Rear Wheel Drive Group D 0600 (8-0)

63 STANDARD PARTS Fig Rear Wheel Drive Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. 69 ( ) Pivot Wldt, Wheel 2 67 ( ) Plate, Pivot, Wheel 626 ( ) Motor--Hyd Gear In (See Breakdowns) ( ) Motor--Hyd Gear (See Breakdowns) 76 ( ) Motor--Hyd Gear (See Breakdowns) 670 ( ) Ftg--Hyd Str Jm2/Om ( ) Ftg--Hyd E5 Jm0/Om ( ) Fitting, Hyd, E5, Jm06/Om ( ) Housing, Sppt, Wheel (Repl. by 755) ( ) House, Wheel ( ) Ftg, Grease Th 90.75L 8 65 ( ) Bracket, Steering, Machining (Repl. by 755) ( ) Bracket, Steering, Machining 9 77 ( ) Channel, Retainer 0 77 ( ) Sleeve,.75B.62D.06 Stl 560 ( ) Cylinder, Hyd (See Breakdowns) ( ) Ftg--Hyd E90 Jm06/Om ( ) Balljoint, Rod End 6886 ( ) Balljoint, Rod End o ( ) Hub and Stud Assy ( ) Stud, Wheel.56--8x ( ) Bearing--Cone, 2.6Bore 0.87Wth ( ) Bearing--Cup,.Dia 0.7Wth ( ) Washer,Lock Special ( ) Nut,Lock--Special Uns ( ) Washer ( ) Ring, Retainer, Lock ( ) Clamp, Cable ( ) Nut, Wheel Lug ( ) Sleeve, Nyl #7 0.0L ( ) Scr--soc.50--x2.75 Alloypltd ( ) Scr--soc M2x D 0600 ( -02) 2-57

64 STANDARD PARTS Fig. 0 - Front Wheels and Brakes Group D 0600 ( -00)

65 STANDARD PARTS Fig. 0 - Front Wheels and Brakes Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Brake Assy, Rh (See Breakdowns) ( ) Brake Assy, Lh (See Breakdowns) 7808 ( ) Bearing--Cup, 2.72Dia 0.59Wth 2 58 ( ) Bearing--Cup, 2.56Dia 0.55Wth ( ) Bearing--Cone,.8Bore 0.72Wth ( ) Nut--Hxslot Pltd 2 o ( ) Drum Assy, Brake 9/ ( ) Stud, Wheel.56--8x ( ) Nut, Wheel Lug, 9/ ( ) Bearing--Cone,.50Bore 0.75Wth 2 57 ( ) Cap, Grease Black Paint 2 800D 0600 (8-0) 2-59

66 STANDARD PARTS Fig. - Wheel Assembly D 0600 ( -00)

67 STANDARD PARTS Fig. - Wheel Assembly ALL Ref. Tennant Part No. Machine Serial Number Description Qty. o ( ) Tire & Rim Assy, Pneu ( ) Tire & Flap Assy ( ) Tube, Inner 5786 ( ) Cap, Valve Stem 2672 ( ) Hub Assy 800D 0600 ( -00) 2-6

68 STANDARD PARTS Fig. 2 - Brake Pedals Group D 0600 ( -00)

69 STANDARD PARTS Fig. 2 - Brake Pedals Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Pedal Wldt ( ) Pad 665 ( ) Spacer 57 ( ) Spacer--.50 Od X.055W X ( ) Rod Wldt, Push, Brake ( ) Cylinder, Master Brake ( ) Pin, Clevis.75D X.000 Lg 8 58 ( ) Ftg,Brass,Tee 06If-- 02Pm-- 06If ( ) Sleeve,.B.50D.8 Cr.Anc ( ) Spacer, Brake ( ) Clamp--Cable, 0.25Dia 0.56Wth ( ) Bracket, Adjuster, Brake 7690 ( ) Rod--Thread, 2End M08X.25X0Lg 7959 ( ) Tube Assy, Brake ( ) Tube Assy, Brake ( ) Insulation, S/Foam.0 Seal Brake Pedal ( ) Bar, Equalizer ( ) Cable, Brake, Park ( ) Cable, Brake, Park ( ) Clamp, Cable-- Brake ( ) Spring, Tens,0.5Dx.06Wire 2.5L ( ) Molding, Trim --Ga ( ) Strip, Retainer, Brake Cable ( ) Lever, Brake ( ) Insulation, Sound Foam 800D 0600 ( -00) 2-6

70 STANDARD PARTS Fig. - Directional Pedal Group D 0600 ( -00)

71 STANDARD PARTS Fig. - Directional Pedal Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Pedal Wldt, Propel Lower W/tread 2 80 ( ) Pedal, Upper W/tread 8289 ( ) Pad, Tread ( ) Pin, Clevis.50 Dia X.50 Lg ( ) Pin, Clevis. Dia X.50 Lg ( ) Panel Wldt, Access Floor ( ) Pin, Clevis.75D X.2 Lg ( ) Screw--Set M0 X H ( ) Bracket, Wldt,Cable Mtg ( ) Bar Wldt, Pivot 079 ( ) Bearing, Fiberglide ( ) Sleeve,.08B.62D.5Stl 8695 ( ) Ring,Retain,Ex,0.50 Stl Steel 5222 ( ) Sprng,Tens,.00Odx.09Wire 2.8L ( ) Cam ( ) Pin, Clevis.25 Dia,.000 Lg ( ) Washer,.56B.90D.07Cr ( ) Cable, Speed Control ( ) Clevis,Adjust Th.Cad ( ) Pin, Clevis ( ) Plate ( ) Rod End Dia ( ) Rod--Thrd, Full ( ) Spacer,.75D.9L Th ( ) Spring, Propel, Centering ( ) Cable, Push,Pull ( ) Balljoint ( ) Lever, Pump, Propel ( ) Bracket, Mtg, Propel Cable ( ) Pin, Haircotter.D.058Wire 2 800D 0600 ( -00) 2-65

72 STANDARD PARTS Fig. - Hydraulic Pumps Group D 0600 ( -00)

73 STANDARD PARTS Fig. - Hydraulic Pumps Group 56 - D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Pump--HydPistonV ( ) Ftg--Hyd E90 Jm2/Om ( ) Ftg--Hyd E90 Jm2/Om2 670 ( ) Ftg--Hyd Str Jm2/Om ( ) Ftg--Hyd Tee Jm2Jfjm ( ) O--Ring Gland ( ) Pump--Hyd Gear Ex ( ) Ftg--Hyd Str Jm06/Om ( ) Ftg--Hyd Str Jm08/Om ( ) Ftg--Hyd Str Jm20/Om20 95 ( ) Ftg--Hyd E5 Jm20/Jf ( ) Ftg--Hyd E5 Jm2/Jf ( ) Ftg--Hyd E90 Jm06/Jf ( ) Harness, Neutral, Start 800D 0600 ( -00) 2-67

74 STANDARD PARTS Fig. 5 - Hydraulic Schematic D 0600 (8-0)

75 STANDARD PARTS Fig. 5 - Hydraulic Schematic D 0600 (8-0) 2-69

76 STANDARD PARTS Fig. 6 - Hydraulic Hose Group ( ) C2 T P C C M5 G T T MM DR C2 T2 SW P M IN OUT 5 PB OUT E FD C A IN L R T P 8 0 OUT IN D 0600 ( -02)

77 STANDARD PARTS Fig. 6 - Hydraulic Hose Group ( ) Ref. Tennant Part No. Machine Serial Number Description Qty. 659 ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd ( ) Hose--Hyd Med0 Jf/J ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd ( ) Hose--Hyd Med0 Jf/Jf 828 ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med78 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Low ( ) Hose--Hyd Med ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd Low ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Med06 Jf/Jf 27 6 ( ) Hose--Hyd Med06 Jf/Jf ( ) Hose--Hyd Low2 Jf/Jf ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd Med06 Jf/J ( ) Hose--Hyd Low0 Jf/J ( ) Hose--Hyd Low 0 56 ( ) Hose--Hyd Med06 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Low ( ) Hose--Hyd Low ( ) Hose--Hyd Suc20 Spcl ( ) Hose--Hyd Low2 Jf/jf ( ) Hose, Hyd,Low0, Jf0str /Jf0 800D 0600 ( -02) 2-7

78 STANDARD PARTS Fig. 7 - Hydraulic Hose Group ( ) D 0600 ( -02)

79 STANDARD PARTS Fig. 7 - Hydraulic Hose Group ( ) Ref. Tennant Part No. Machine Serial Number Description Qty. 659 ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd ( ) Hose--Hyd Med0 Jf/J ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd Ar ( ) Hose--Hyd ( ) Hose--Hyd Med0 Jf/Jf 828 ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med78 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Low ( ) Hose--Hyd Med ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd Low ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med08 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Med06 Jf/Jf 27 6 ( ) Hose--Hyd Med06 Jf/Jf ( ) Hose--Hyd Low2 Jf/Jf ( ) Hose--Hyd Med ( ) Hose--Hyd Med ( ) Hose--Hyd Med06 Jf/J ( ) Hose--Hyd Low0 Jf/J ( ) Hose--Hyd Low 0 56 ( ) Hose--Hyd Med06 Jf/J ( ) Hose--Hyd Med ( ) Hose--Hyd Low ( ) Hose--Hyd Low ( ) Hose--Hyd Suc20 Spcl ( ) Hose--Hyd Low2 Jf/jf 800D 0600 ( -02) 2-7

80 STANDARD PARTS Fig. 8 - Hydraulic Reservoir Group D 0600 ( -02)

81 STANDARD PARTS Fig. 8 - Hydraulic Reservoir Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. o 8076 ( ) Tank Wldt, Hydraulic w/label o 2 06 ( ) Breather, Hyd 6288 ( ) Gasket, Hyd Tank Breather ( ) Breather Cap and Gasket ( ) Gasket, Hyd Cap ( ) Gauge, Sight Lh ( ) Ftg--Hyd Str Jm2/Om ( ) Ftg--Hyd Tee Jm2Jmjf ( ) Ftg--Hyd Tee Jm06Jmom ( ) Ftg--Hyd E90 Special Jm2/Jf2 90 ( ) Ftg--Hyd Tee Jm0Jmom ( ) Ftg--Hyd E90 Jm0/Jf0 6 ( ) Strainer--Hyd Suction ( ) Ftg--Hyd Str Jm20/Om ( ) Ftg--Hyd E ( ) Ftg--Hyd Plg Om ( ) Ftg--Hyd Tee Jm06Jmjf ( ) Fitting, Hyd, Str, Jm0/Om0 800D 0600 ( -02) 2-75

82 STANDARD PARTS Fig. 9 - Hydraulic Solenoid Valve Group M C2 7 5 DR M M5 G C 7 T 5 2 M2 P T2 T SW D 0600 (8-0)

83 STANDARD PARTS Fig. 9 - Hydraulic Solenoid Valve Group Ref. Tennant Part No. Machine Serial Number Description Qty. 229 ( ) Scr Flt M8x ( ) Ftg--Hyd Str Jm08/Om ( ) Ftg--Hyd E90 Jm08/Jf ( ) Ftg--Hyd E90 Jm08/Om ( ) Ftg--Hyd Tee Jm08Jmjf ( ) Ftg--Hyd Str Jm06/Om ( ) Ftg--Hyd E90 Jm0/Om ( ) Ftg--Hyd Str Jm06Om06L ( ) Ftg--Hyd Str Jm08Om08L ( ) Switch Assy, Pressure, Hyd 5799 ( ) Ftg--Hyd Str Jm2Om2L ( ) Plate, Mtg, Valve, Solenoid 09 ( ) Isolator, Vac Fan ( ) Bracket, Mounting ( ) Valve--Hyd, Solenoid (See Breakdowns) 800D 0600 (8-0) 2-77

84 STANDARD PARTS Fig. 0 - Hydraulic Lift Valve Group IN 28 9 A PB E OUT D C F D 0600 (8-0)

85 STANDARD PARTS Fig. 0 - Hydraulic Lift Valve Group NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Valve, Hyd Control Man (See Breakdowns) ( ) Ftg--Hyd E90 Jm0/Om ( ) Ftg--Hyd Str Jm08/Om08 99 ( ) Ftg--Hyd Tee Jm08Omjm ( ) Ftg--Hyd E90 Jm08/Jf ( ) Ftg--Hyd E90 Jm06/Jf ( ) Ftg--Hyd Tee Jm06Jmjf ( ) Pin, Clevis.8 Dia.X.62 Lg ( ) Ftg--Hyd Str Jm0/Om ( ) Ftg--Hyd Str Jm06/Om08 57 ( ) Ftg--Hyd Tee Jm0Jfjm ( ) Ftg--Hyd Tee Jm0Jmjf 7785 ( ) Bracket Wldt, Mounting, Valve 627 ( ) Bushing, Isolator--Inner,Rbr ( ) Ring ( ) Sleeve,.259B.8D.62 Dom 7 00 ( ) Washer--Flt. Fender Pltd ( ) Handle, Rh ( ) Handle, Center ( ) Handle, Lh 2 6 ( ) Knob ( ) Knob ( ) Screw Set M 6X ( ) Bearing, Nylon.50B A ( ) Pin,Clevis,0.50 Dia.X.50 Lg ( ) Spacer,.90L ( ) Spacer,.25 L ( ) Ftg--Hyd Rst JM0/ ( ) Pin, Haircotter.d.058wire 800D 0600 (8-0) 2-79

86 STANDARD PARTS Fig. - Side Brush Group D 0600 (8-0)

87 STANDARD PARTS Fig. - Side Brush Group NA Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Motor, Hyd, (See Breakdowns) ( ) Ftg--Hyd Str Jm06/Om ( ) Ftg--Hyd Str Jm08/Jm ( ) Guard Wldt, Side Brush ( ) Guard, Side Brush ( ) Bracket, Mounting, Motor ( ) Spacer ( ) Bracket, Pivot ( ) Bracket, Lift ( ) Bearing ( ) Shaft, Pivot ( ) Washer,.00B ( ) Spacer 628 ( ) Washer--Belleville.50 Pltd ( ) Bearing, Flange.875 Bore ( ) Pin ( ) Bolt--Eye M ( ) Spring, Extension ( ) Bracket, Spring ( ) Spring, Comp ( xxxxxx ) Replacement Kit, Rh. Side Brush Cable ( ) Clamp, Cable.5 Dia ( ) Pin Assy, Side Brush W/clip ( ) Sleeve, Nylon # L ( ) Spacer ( ) Bracket, Angle ( ) Tie Cable.00D Max.Lg ( ) Screw--Hex M0X ( ) Screw--Hex M0X.5 90 Full Thd ( ) Plate, Angle 750 ( xxxxxx-- ) Cable ( xxxxxx-- ) Spring, Torsion, Rh ( xxxxxx-- ) Hook, Cable 750 ( xxxxxx-- ) Spacer ( xxxxxx-- ) Bolt, Shoulder ( xxxxxx-- ) Washer 2 800D 0600 (8-0) 2-8

88 STANDARD PARTS Fig. 2 - Side Brush Lift Group D 0600 (8-0)

89 STANDARD PARTS Fig. 2 - Side Brush Lift Group D Ref. Tennant Part No. Machine Serial Number Description Qty ( ) Plate Wldt ( ) Cable, Side Brush, Lift 79 ( ) Pulley Assy, Cable,.5 Dia ( xxxxxx ) Replacement Kit, Roller, Side Brush Lift ( ) Cable, Retaining, S Br ( xxxxxx-- ) Plate, Side Brush Roller ( ) Sleeve,.75B.75D.2 Stl ( ) Plate ( ) Bearing ( ) Sleeve, 0.06B 0.75D.80 Stl ( ) Sleeve,.8B.00D.5 Stl ( ) Spacer 7760 ( ) Plate, Angle ( ) Sleeve,0.06B.750D.800 Stl ( ) Ftg--Hyd E90 Jm0/Om ( ) Cylinder, Hyd.5B.5S ( ) Pin,Clevis,0.7 Dia.X 2.2 Lg ( ) Pin, Cotter.09X ( ) Plate ( ) Knob, Plastic 2 ( ) Nut Low Crown ( ) Rod, Thread ( ) Switch Rocker Spst ( ) Cover, Rocker Switch Seal ( ) Plate--Cover ( ) Spacer ( ) Plate, Cover ( ) Ftg--Hyd E ( ) Valve, Hyd Solenoid (See Breakdowns) ( ) Ftg--Hyd E90 Jm0/Om ( ) Ftg--Hyd str ( ) Ftg--Hyd E90 2 ( ) Plate, Cover 8095 ( xxxxxx-- ) Sleeve ( xxxxxx-- ) Screw, Hex m ( xxxxxx-- ) Washer, Flat ( xxxxxx-- ) Nut, Hex, Flange ( xxxxxx-- ) Screw, Hex m ( xxxxxx-- ) Washer, Flat m ( xxxxxx-- ) Screw, Hex m0 275 ( xxxxxx-- ) Nut, Hex Lock m0 800D 0600 (8-0) 2-8

90 STANDARD PARTS 5 Fig. - Main Brush Drive Group D 0600 (8-0)

91 STANDARD PARTS Fig. - Main Brush Drive Group ALL Ref. Tennant Part No. Machine Serial Number Description Qty. 66 ( ) Shaft Wldt, Main Brush 2 58 ( ) Bearing&Clr,.25B 2.D.W 2 59 ( ) Flange,Brg, Hole 65 ( ) Plate, Mtg, Latch ( ) Latch 6 69 ( ) Arm Wldt, M Br, Idler ( ) Bearing--Ball,.8B 2.8D 0.67W ( ) Shaft, Idler ( ) Plug Wldt, Idler ( ) Strip, Retainer, Bearing 025 ( ) Plate, Seal ( ) Plug, Tube 650 ( ) Arm Wldt, M Br, Motor 5 ( ) Motor--Hyd Gear In (See Breakdowns) ( ) Ftg--Hyd Str Jm08/Om ( ) Seal Foam Rubber.75X.5X ( ) Plug Weld, Brush Drive, Sweep ( ) Washer,.5B.75D.2Cr.Znc 9 68 ( ) Bar Wldt, Brush Pressure 20 0 ( ) Sleeve, Hyd ( ) Screw, Set ( ) Ftg--Hyd Str Jm0/Om0 800D 0600 (8-0) 2-85