MATERIAL SAFETY DATA SHEET

Size: px
Start display at page:

Download "MATERIAL SAFETY DATA SHEET"

Transcription

1 Sadure Fast Gold L Page 1 WHMIS controlled: Section 01 - Product Information Identification of the company: Clariant (Canada) Inc Cousens Street St.Laurent, Q.C., H4S 1X3 Information of the substance/preparation: ESHA Tel (514) , Fax (514) Emergency tel. number: +1 CANUTEC (613) Trade name: Sadure Fast Gold L Material number: Chemical family: anionic azo dyestuff/copper complex Primary product use: aluminium dye Section 02 - Composition information on hazardous ingredients Hazardous ingredients: Component CAS number Concentration Copper, elemental >= 1 - <= 5 % Hexylene glycol >= 1 - <= 5 % Component toxicity information: Hexylene glycol ( ) Acute oral toxicity: LD50 3,700 mg/kg (rat) Section 03 - Hazards identification Health effects of exposure: Eye and skin contact may cause irritation. Inhalation of dust may irritate the respiratory tract. Listed carcigen: IARC: No NTP: No OSHA: No Other: No Section 04 - First aid measures

2 Sadure Fast Gold L Page 2 After inhalation: Get victim to fresh air. Give artificial respiration or oxygen if breathing has stopped or is difficult. Get prompt medical attention. Do t give fluids if victim is unconscious. After contact with skin: Remove contaminated clothing and wash affected areas with soap and plenty of water for at least 15 minutes. If redness or skin irritation occurs, seek medical attention. After contact with eyes: Immediately wash the eyes with flowing water for at least 15 minutes. Insure proper irrigation by occasionally lifting upper and lower eyelids. Thereafter seek prompt medical attention. After ingestion: If ingested, do t induce vomiting. Get immediate medical assistance. Advice to doctor / Treatment: None kwn. Section 05 - Fire fighting measures Flashpoint: Extinguishing media: t applicable Special fire fighting procedure: Cool container and metallic parts with a water spray jet Unusual fire and explosion hazards: all Hazardous combustion products: carbon oxides copper oxides nitrogen oxides sulfur oxides Minimum ignition energy : Organic dusts have potential to be explosive with static spark or flame initiation. Maintain good housekeeping for control of dust. < 10 J Dust explosion hazard Method: modified Hartmann tube Section 06 - Accidental release measures Steps to be taken in case of spill or leak: Wear prescribed protective equipment. Sweep up or shovel into disposal containers using n-sparking tools. Eliminate ignition sources. Wet down with n-reactive liquid if required to limit dusting. If melted, allow to solidify first. Clean up spill location. Must t be released into sewers, drains or wells. Section 07 - Handling and storage Advice on safe handling: Keep container tightly closed.

3 Sadure Fast Gold L Page 3 Further info on storage conditions: Keep container tightly closed in a cool, well-ventilated place Section 08 - Exposure controls / personal protection Occupational exposure limits: Component CAS Regulatory list Type of value Value 1 Value 2 number: COPPER DUSTS AND US OSHA Table Z- PEL: 1 mg/m3 MISTS, AS /CU/ 1 Data COPPER FUME, AS /CU/ US OSHA Table Z- PEL: 0.1 mg/m3 1 Data COPPER, DUSTS AND MISTS, AS CU US ACGIH Threshold Limit Values Data Time Weighted Average (TWA): 1 mg/m3 COPPER, FUME US ACGIH Threshold Limit Values Data Time Weighted Average (TWA): 0.2 mg/m3 Respiratory protection: Hand protection: Eye protection: Other protective equipment: Wear an approved dust respirator when handling product. Rubber or Plastic Wear safety glasses with side-shields. Wear clothing suitable to avoid skin contact. Section 09 - Physical and chemical properties Form: Color: Odor: ph: Solubility in water: Melting point : Boiling point : Bulk density: Granules yellow t specified 5-6 (20 C, 3 g/l) app. 60 g/l (20 C) soluble t applicable ( 1,013 hpa) t applicable 800 kg/m3 Section 10 - Stability and reactivity Thermal decomposition: 180 C Method: dynamic decomposition test Thermal decomposition: 190 C Method: isoperibolic decomposition test Heating rate: 0 K/min

4 Sadure Fast Gold L Page 4 Hazardous Polymerization: Hazardous decomposition products Will t occur. Conditions to avoid: None kwn. When used and handled as intended, ne. Section 11 - Toxicological information Acute oral toxicity: Skin irritation: Eye irritation: LD50 > 5,000 mg/kg (rat) n-irritant (rabbit) Method: 16CFR n-irritant (rabbit) Method: 16CFR Section 12 - Ecological information Biodegradation: Fish toxicity: Bacteria toxicity: app. 78 % (14 d, TOC) Method: static method LC0 190 mg/l (48 h, rainbow trout (salmo gairdneri, oncorhynchus mykiss)) IC50 > 100 mg/l (activated sludge) Method: OECD 209 * 1984 activated sludge.respir.inhib. Section 13 - Disposal considerations Waste disposal information: Recommended disposal is by incineration in an approved facility. Follow local regulations. Section 14 - Transport information TDG t restricted IATA t restricted IMDG t restricted Section 15 - Regulatory information Registration status: DSL: NDSL: CEPA Listed as priority substance: Listed as toxic substance: yes yes TSCA Status: All components of this product are listed on the TSCA Inventory.

5 Sadure Fast Gold L Page 5 FDA: This product is t registered with the FDA. Section 16 - Other information The information contained on this MSDS is to the best of our kwledge an accurate summary of the data available as of the date of preparation. Clariant (Canada) Inc. is t liable for the application or use of this information in situations beyond its control or outside the rmal and expected use of its product. Clariant (Canada) Inc. assumes responsibility for damage or injury from the use of the product described herein.