LINEAR BALL SLIDES Ultra Precision Aluminum Black Anodized

Transcription

1 LINER LL SLIDES Ultra Precision luminum lack nodized Linear all Slides are Designed for Light to Medium Loads. Slides Run with rade 5 Precision alls that Roll long Rod Rails. H Tap K J learance Holes E D djusting Screws Rod Rails (4) (Stainless, round and Hardened Precision alls (rade 5) Straightness of Travel D E H J K RTED LOD (Lbs) TRVEL NUMER SESPL SESPL #4 # L SESPL SESPL SESPL SESPL #6 # SESPL SESPL SEDSPL SEDSPL #10 # SEDSPL SEDSPL SEDSPL SEJSPL SEJSPL #10 # SEJSPL SEJSPL SEJSPL SEKSPL /4 #1/ SEKSPL SEKSPL NET SES IN FX (914) (914)

2 LINER LL SLIDES Standard Precision luminum lack nodized Linear all Slides are Designed for Light to Medium Loads. Slides Run with rade 5 Precision alls that Roll long Rod Rails. H Typ H Tap K J learance Holes E djusting Screws Rod Rails (4) (Stainless, round and Hardened Precision alls (rade 5) Straightness of Travel.0002 in/in 178 (914) FX (914) SES IN NET

3 LINER LL SLIDES Standard Precision luminum lack nodized Linear all Slides are Designed for Light to Medium Loads. Slides Run with rade 5 Precision alls that Roll long Rod Rails. E H J K RTED LOD (Lbs) TRVEL NUMER SESL #2-56 # SESL SESL SESL SESL SESL #2 # SESL SESL SESL SEESL SEESL SEESL #4 # SEESL SEESL SEESL SESL SESL SESL #4 # SESL SESL SESL SESL SEFSL SEFSL SEFSL #6 # SEFSL SEFSL SEFSL SEFSL SEHSL SEHSL SEHSL #6 # SEHSL SEHSL SEHSL SEHSL SESL SESL #6 # SESL SESL SESL SESL SEDSL SEDSL # SEDSL SEDSL SEDSL # SEDSL SEDSL / SEDSL SEDSL SEDSL SEDSL SEDSL NET SES IN FX (914) (914)

4 LINER LL SLIDES Standard Precision luminum lack nodized Linear all Slides are Designed for Light to Medium Loads. Slides Run with rade 5 Precision alls that Roll long Rod Rails. H Top Mounting Hole onfiguration for SEFSRL-60* Typ H Tap K J learance Holes E djusting Screws Precision round Stainless Steel Rollers Hardened Precision round Stainless Steel Rails Straightness of Travel.0002 in/in E H J K RTED LOD (Lbs) TRVEL NUMER SESRL # SESRL SESRL SESRL # SESRL SESRL SESRL # SESRL SESRL SEDSRL SEDSRL # SEDSRL SEDSRL SEESRL SEESRL # SEESRL SEESRL SEFSRL SEFSRL # SEFSRL SEFSRL SEFSRL (914) FX (914) SES IN NET

5 WOODRUFF KEYS 303 Stainless NSI , R 1978 D E F NSI KEY SIZE KEY No. (REF) D E F NUMER SEK SEK SEK SEK SEK SEK SEK SEK SEK SEK SEK SEK-12 Material: Roller up ase Hardened Steel Needle Rollers Hardened earing age Low Hardened Steel Width NEEDLE ERINS High Velocity Demanding Loads Very Low Friction ore * Plastic earing age ORE ERIN HOUSIN ORE DIMETER ERIN WIDTH MXIMUM SPEED RPM DYNMI (lbs) STTI (lbs) SHFT DIMETER NUMER 1/ , SE42RN* 3/ , SE43RN* 3/ , SE63RN* 1/ , SE44RN 1/ , SE74RN 5/ , SE55RN 5/ ,000 1, SE95RN 3/ , SE56RN 3/ ,000 1,440 1, SE016RN 1/ , SE68RN 1/ ,000 1,930 1, SE218RN 5/ ,000 1,290 1, SE701RN 5/ ,000 2,360 2, SE2101RN 3/ ,000 1,390 1, SE621RN 3/ ,000 3,000 2, SE2121RN ,000 2,180 2, SE861RN ,000 4,650 5, SE6161RN NET SES IN FX (914) (914)

6 LL ERINS PREISION Non Flange ores 3/64" thru 1/2" Shielded Un Shielded Material: 440 Stainless Steel W I.D. Un Shielded MIL-L-6085 "Oil" Shielded MIL "rease" I.D. W SHIELDED DYNMI LOD(lbs.) NUMER STTI LOD(lbs.) E 3 E N P-37 P Y P-38 P N P-39 P Y P-40 P N P-41 P Y P-42 P N P-43 P Y P-44 P N P-45 P Y P-46 P N P-47 P Y P-48 P N P-49 P Y P-50 P N P-51 P Y P-52 P N P-53 P Y P-54 P N P-55 P Y P-56 P N P-57 P Y P-58 P N P-59 P Y P-60 P N P-61 P Y P-62 P N P-63 P Y P-64 P N P-65 P Y P-66 P N P-67 P Y P-68 P N P-69 P Y P-70 P N P-71 P Y P-72 P (914) FX (914) SES IN NET

7 W PREISION LL ERINS Flange ores 3/64" thru 1/2" Shielded Un Shielded Material: 440 Stainless Steel I.D. FD FW Un Shielded MIL-L-6085 "Oil" Shielded MIL "rease" I.D. W FD SHIELDED FW DYNMI LOD(lbs.) NUMER STTI LOD(lbs.) E 3 E N.013 F 42 F Y.031 F 43 F N.023 F 44 F Y.031 F 45 F N.023 F 46 F Y.031 F 47 F N.023 F 48 F Y.031 F 49 F N.023 F 50 F Y.031 F 51 F N.023 F 52 F Y.031 F 53 F N.030 F 54 F Y.030 F 55 F N.023 F 56 F Y.036 F 57 F N.023 F 58 F Y.036 F 59 F N.023 F 60 F Y.031 F 61 F N.042 F 62 F Y.042 F 63 F N.023 F 64 F Y.036 F 65 F N.023 F 66 F Y.045 F 67 F N.042 F 68 F Y.042 F 69 F N.031 F 70 F Y.031 F 71 F N.062 F 72 F Y.062 F 73 F Y F 74 F 41 NET SES IN FX (914) (914)

8 LL ERINS Non Flange ores 1/8" thru 1-1/4" Shielded Un Shielded Rubber Sealed W Material: hrome Steel Single Row E 1 I.D R Radius Un Shielded MIL-L-6085 "Oil" Type 1 Shielded MIL "rease" Type 2 Rubber Sealed MIL "rease" Type 3 I.D. W R TYPE DYNMI LOD (lbs.) STTI NUMER E SE SE SE SE SE SE SE SE SE SE SE SE SE SE SE SE SE SE SE11-19 Flange ores 1/8" thru 3/8" Shielded Un Shielded W Material: hrome Steel Single Row E 1 I.D FD Radius Un Shielded MIL-L-6085 "Oil" Type 1 FW ±.002 Shielded MIL "rease" Type 2 I.D. W FD TYPE FW DYNMI LOD (lbs.) STTI LOD (lbs.) NUMER E SE SE SE SE SE SE SE SE (914) FX (914) SES IN NET

9 Material: 440 Stainless Steel E 5 LL ERINS Non Flange ores 1/8" thru 3/4" W Un Shielded I.D. W DYNMI STTI LOD (lbs) LOD (lbs) NUMER SE SE SE SE SE SE SE SE01-8 W I.D. WF Un Shielded MIL-L-6085 "Oil" ULTR PREISION Non Flange Flange ores 1/8" thru 1/4" Un Shielded I.D I.D FD Material: 440 Stainless Steel R R FW W WF ULTR FD FW PREISION I.D. SHFT SIZE ORNER RDIUS TO LER R FLNE NUMER UF 1 U UF 3 U UF 5 U UF 7 U 8 WF ±.005 NON FLNE TPERED Flange ores 1/8" thru 5/16" Shielded I.D FD Material: 440 Stainless Steel E 7 T FW SHFT SIZE I.D. W FD E DYNMI LOD (lbs) STTI LOD (lbs) TPER T"/FT NUMER 1/ SE2-1 3/ SE2-2 1/ SE2-3 5/ SE2-4 NET SES IN FX (914) (914)

10 RONZE ERINS PREISION MINITURE Precision Instrument earings all earing Interchangeability at a Fraction of the ost Drawing on the experience of the design engineers of the electronic industry, SES, Inc has designed, manufactured and is now in a position to deliver from stock a complete line of Miniature Precision ronze earings. In the past it became necessary to use ball bearings in countless applications not because of the critical requirements in actual rotating performance but mainly for reasons of close tolerances. The bronze bearings listed on the following pages are interchangeable with ball bearings in many design applications and the incorporation of these bearings results in tremendous cost reduction. Design dvantages 1. Interchangeable with standard miniature ball bearings. 2. vailable in a full range of sizes, both flanged and sleeve types. 3. Vacuum-impregnated with instrument oil, per MIL-L-6085, completely self-lubricating. (lso available without oil, if desired). 4. Low coefficient of friction. 6. Precision made of sintered bronze per MIL--5687, Type I, omp. with 4 % Molybdenum Disulfide added at sintering. (lso available without Molybdenum Disulfide on special order). 7. Use of series 416 hardened stainless steel shafts is recommended for superior performance and life of bearings. 8. earings are priced at one-third the cost of most miniature ball bearings. haracteristics 1. Hardness (Rockwell No)... H45 2. oefficient of Friction (reak-away) oefficient of Thermal Expansion, per F (x 10-6 ) Tensile Strength (psi)... 16, ompressive Strength (psi)... 18,000 For normal applications, MINITURE RONZE ERINS may be installed with a shouldering plug. The recommended housing fit is (D ) , This results in a maximum close-in of.0002 reduction in the I.D. after being pressed into the housing. With this recommended housing fit, hand pressure will suffice for inserting the bearing. The recommended shaft size for normal applications is ( ) , (914) FX (914) SES IN NET

11 Relief PREISION MINITURE RONZE ERINS Flange Non Flange ores 1/8" thru 3/4" W X I.D FD ±.005 M.S. FW Runout of ore to M.S. within.0002 T.I.R. Runout of x Surface to ore within.0002 I.D. W FD FW LOD SPEED RTIN NUMER I.D. W LOD SPEED RTIN * NUMER ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O ,000 O 81 * LOD SPEED RTIN. The ratings shown are based on a K of 50,000 which is generally accepted for normal self- lubricating ronze earing usage. The Load-Speed Rating may be used to quickly determine the allowable bearing load for any size bearing and any value of shaft RPM. For example: earing size selected: Load-Speed Rating: 18,000 (from table) Shaft Speed: 3,000 RPM Then allowable bearing load = Load-Speed Rating Shaft Speed 18,000 = = 6 lbs. 3,000 The maximum shaft speed recommended for normal applications of MINIRONZE bearings is 10,000 RPM. t low shaft speeds, shearing and deflecting loads on the shaft (rather than radial loads on the bearings) become the limiting factors in calculating maximum driving torque. NET SES IN FX (914) (914)

12 RONZE ERINS OIL LESS Flange Non Flange ores 1/8" thru 1/2" MIL--5687a I.D. I.D. Flanged Plain ± SHFT SIZE I.D. FLNE ONLY ±.005 ±.003 NUMER PLIN FLNE.125 O 12 O 1 1/ O 13 O O 14 O O 82 1/ O O O 83 O O 15 O 4 3/ O 16 O O 17 O O 18 O O O 19 O 8 1/ O 20 O O 21 O O 22 O O 85 O O 86 O O 87 O 109 5/ O 88 O O 89 O O 90 O O O 92 O O 93 O 114 3/ O 94 O O 95 O O 96 O O 97 O O 98 O O 99 O 120 1/ O 100 O O 101 O O 102 O O (914) FX (914) SES IN NET

13 Thrust Washers 410 SS R or 1075 St. R T THRUST ERINS Stainless Steel arbon Steel ores 1/8" thru 1-1/4" Hardened 440 Stainless or arbon Steel alls L 8200 Nylon all Retainer ±.002 STINLESS STEEL RON STEEL NUMER/MTL T L NUMER OF LOD RTIN-LS LOD RTIN-LS LLS T 15 RPM T 15 RPM STINLESS RON / SE5S-1 SE / SE5S-2 SE / SE5S-3 SE / SE5S-4 SE / SE5S-5 SE / SE5S-6 SE / SE5S-7 SE SE5S-8 SE / SE5S-9 SE / SE5S-10 SE5-10 T Material: Rollers hrome Steel age 1008 arbon Steel Washers 1074 Steel L T L LOD RTIN DYNMI-LS NUMER ,100 SE5R ,300 SE5R ,550 SE5R ,750 SE5R ,950 SE5R ,480 SE5R ,700 SE5R ,850 SE5R-8 NET SES IN FX (914) (914)

14 SHFT HNER lack nodized luminun Shafts 1/4" thru 1" H lamping Screw learance Hole for Screw J E T ±.001 SHFT DI (REF) E T H J NUMER 1/ # 6 SEHML-1 3/ # 8 SEHML-2 1/ # 10 SEHML-3 3/ /4 SEHML /4 SEHML (914) FX (914) SES IN NET

15 SPLIT ERIN Steel acked ronze with Impregnated Teflon ores 1/8" thru 1" NOMINL SHFT SIZE TUL SHFT SIZE NOMINL HOUSIN ORE NUMER 1/8.1247/ / / / / /4.2510/ /4.2497/ / / / / /8.3760/ /8.3747/ / / /2.4997/ / / /8.6247/ / / /4.7497/ /8.8761/ / / / SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD SE41UD-27 NET SES IN FX (914) (914)

16 LINER LL ERINS Stainless Steel hrome Steel ores 1/4" thru 1" L R D Retainer Ring roove WORKIN ORE OUTSIDE DIMETER D L ±.015 R W RTED LOD (LS) REOMMENDED FITS NORML PRESS NUMER/MTL STINLESS HROME SEML-125 SEML SEML-187 SEML SEML-1 SEML SEML-2 SEML SEML-3 SEML SEML-4 SEML SEML-5 SEML-5 LINER LL ERINS OPEN STYLE Stainless Steel ores 1/2" thru 2" L R F E D Retainer Ring roove ORE (EFORE DJUSTMENT) HOUSIN ORE D REF L ±.015 R W RTED LOD (LS) WIDTH E MINIMUM SLOT NLE F NUMER.5000 ± SEDML ± SEDML ± SEDML ± SEDML ± SEDML ± SEDML (914) FX (914) SES IN NET