SUBMERSIBLE. Electric cables

Transcription

1 SUBMERSIBLE Electric cables

2 Aristoncavi spa reserve the right to modify the data in this catalogue without notice. 06/06 Copyright Drawings and technical descriptions in this catalogue may not, under penalty of law, be copied, reprinted, duplicated or otherwise wrongfully reproduced or utilized without our written consent, in either their original state or after alteration. The names, trademarks and designs of our products are all protected by law. It does not constitute a warrantee of any kind, expressed or implied, of our products or their suitability for any particular use.

3 Electric cables for liquid resistance

4

5 index page 0 SUBMERSIBLE H07RN8-F - SRN8-F 4 SUBMERSIBLE S S07RC4N8-F / SRC4N8-F 6 SUBFLAT SBNH-F 0 SNAKEFLEX NSSHÖU 0/J 4 NAUTILUS 500 NAUTILUS 500 0,6/ KV 8 NAUTILUS 500 S NAUTILUS 500 S 0,6/ KV 0 MARINE RG7OEFE 0,6/ KV 4 DRINCABLE DRINCABLE 450/750 V - 0,6/KV 8 DRINCABLE OERRE H07RN-F OR 46 TERMALE 07BN-F 50 URSUS MT SUB PLUS (N)TSCGEWÖU 54 URSUS MT SUB-E PLUS (N)TSCGECEWÖU 58 DRINCABLE MT PLUS DRINCABLE MT PLUS,6/6kV 6 TECHNICAL DATA ARISTONCAVI

6 THE ENERGY OF HERITAGE Aristoncavi starts its activity in Brendola (Vicenza) in 958 on a.600 sqm surface, since then it has grown up to the present sqm due to a expansion and reallocation of the manufacturing sites and warehouses, shared between the two production units dedicated to the manufacture of conductors and electric cables. Today it is one of the most important independent manufacturers of rubber insulated low voltage and medium voltage (up to 45kV) cables. Aristoncavi has moreover achieved leading positions in some market segments for the special application cables. In the last years the company has especially invested in the technological growth, by strengthening the technical department with a particular care for the Research & Development. HEAD QUARTER VICENZA, Italy branch offices DUBAI, United Arab Emirates SHANGHAI, China SANTIAGO, Chile IN THE WORLD Aristoncavi, with its products, has contributed to the realization of important projects worldwide and it more then 80% exports today in more than 50 countries in the world also thanks to its branch offices: in Dubai (for the Middle East and African market), in Shanghai (for the Chinese, Australian and South Pacific market) and in Santiago de Chile (for the North and South American market). 6 ARISTONCAVI

7 Aristoncavi has its own innovative specific production and laboratory equipment, capable of engineering and manufacturing high-tech cables for different applications. The company can boast the quality of the Italian products that, in relation to the different construction characteristics and different uses can be listed in the following main families: reeling application mining application tunneling application wind towers application railways application resistant to the permanent immersion in liquids infrastructure ARISTONCAVI 7

8 main features summary METERS RATED VOLTAGE TEST VOLTAGE WORKING TEMP. ON THE CON- DUCTOR SHORT CIRCUIT TEMP. OIL RESI- STANCE OZONE RESI- STANCE UV RESI- STANCE BURNING BEHAVIOR m V-kV kv C C SUBMERSIBLE /750-0,6/,5/ SUBMERSIBLE S /750-0,6/,5/ SUBFLAT 00 0,6/ SNAKEFLEX 00 0,6/ NAUTILUS ,6/ NAUTILUS 500 S 500 0,6/ MARINE 00 0,6/ DRINCABLE /750-0,6/,5/ DRINCABLE ,6/ OERRE /750, TERMALE /750, URSUS MT SUB PLUS 00,6/6 6/0 8,7/5 /0 /7/4/ URSUS MT SUB-E PLUS 00,6/6 6/0 8,7/5 /0 /7/4/ DRINCABLE MT PLUS 00,6/ ARISTONCAVI

9 SUBMERSIBLE PUMPS SUBMERSED PUMPS SEA BED LAYING DRINKING WATER OIL LUBRICATION HOT AND AGGRESSIVE WATER TRAILING OPERATION IN WATER, FOR MINING AND TUNNELLING TRAILING OPERATION OF DREDGERS AND FLOATING DOCKS (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) (*) Main use (*) See chemical resistance table p. 64/65 ARISTONCAVI 9

10 SUBMERSIBLE H07RN8-F / SRN8-F CEI EN (H07RN8-F) Based on CEI EN (SRN8-F) Phase Conductors MATERIAL: bare copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound: EI4 quality (450/750V) acc.to EN 506-, GI quality (0,6/kV) acc.to VDE 007 part 0 cores identification According to HD 08 OUTER SHEATH MATERIAL: water resistant rubber compound, EM quality acc.to EN COLOUR: black APPLICATION Tough rubber unscreened cable for installation inside or outside in dry, damp or wet environments and in hazardous environments (subject to local regulations). It can be immersed in fresh and salt water to a depth of 00 meters: for flexible power supplies, suitable for submersible motors and pumps. The synthetic rubber compound is ozone, UV, sunlight and weather resistant. 0 ARISTONCAVI

11 Electrical working data Nominal rated voltage U 0 / U V - kv 450/750-0,6/ Test voltage kv,5/4 Max AC voltage V - kv 540/900-0,7/, Max DC voltage kv,5 -,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius* mm Static condition: 4 x D Mobile condition: 6 x D Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- ARISTONCAVI

12 SUBMERSIBLE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 5,7 6,6 55 x,5,9 6,4 7, x4,4 7, 8, x6,9 8,0 9, x0,8 9,7 0, x6 4,9 0,9, x5 6,,8 4, x5 7, 4, 5, x50 8,9 6,8 8, x70 0,6 8,9 0, x95,,, x0,8, 5, x50 5,5 5,7 7, x85 7,0 8,0 0, x40 9,5,, x00, 4,4 7, x, 7,7 8, x,5,5 8,5 9, x,5,9 0,, x4,4,4,6 0 0 x6,9,9 4, x0,8 7,5 9, x6 4,9 9,9, x5 6,,7 5, G, 8,4 9, G,5,5 9, 0, G,5,9,0, 00 G4,4,4, G6,9 4, 5, G0,8 9, 0, G6 4,9,8, G5 6, 5,8 8, G5 7, 8,7, G50 8,9,8 6, G70 0,6 8, 4, 0 50 G95, 4,7 46, G0,8 46,8 50, G50 5,5 5,9 56, G85 7,0 56,6 6, G40 9,5 6,9 69, ARISTONCAVI

13 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N 4G, 9, 0, G,5,5 0,4, G,5,9,4, G4,4 4,0 5, G6,9 6,0 7, G0,8,, G6 4,9,9 5, G5 6, 8,8, G5 7,,9 4, G50 8,9 8, 4, G70 0,6 4,0 46, G95, 49, 5, G0,8 5,0 57, G50 5,5 57,9 6, G85 7,0 6, 68, G40 9,5 7, 77, G,5,5,5,7 0 5G,5,9,7 5, G4,4 5,6 7, G6,9 7,8 9, G0,8,4 5, G6 4,9 6,5 8, G5 6,,9 4, G,5,5 5,8 7, G,5,5 8, 9, G,5,5,5, G,5,9 8, 9, G,5,9,4, G,5,9 5,4 7, G,5 + x0,75,5/,,7 5, G,5 + x0,75,9/, 5,9 8, G,5 + x0,50,5/0,8 5, 7, G,5 + x0,75,5/, 5, 7, G,5 + x0,50,9/0,8 7,7 0, G,5 + x0,75,9/, 7,7 0, 50 6 ARISTONCAVI

14 SUBMERSIBLE S S07RC4N8-F / SRC4N8-F Based on CEI EN Phase Conductors MATERIAL: bare copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound: EI4 quality (450/750V) acc.to EN 506-, GI quality (0,6/kV) acc.to VDE 007 part 0 cores identification According to HD 08 INNER SHEATH MATERIAL: rubber compound 4 4 SCREEN MATERIAL: bare copper braid 5 5 OUTER SHEATH MATERIAL: water resistant rubber compound, EM quality acc.to EN COLOUR: black 4 5 APPLICATION Tough rubber screened cable for installation inside or outside in dry, damp or wet environments and in hazardous environments (subject to local regulations). It can be immersed in fresh and salt water to a depth of 00 meters: for flexible power supplies, suitable for submersible motors and pumps. The synthetic rubber compound is ozone, UV, sunlight and weather resistant. 4 ARISTONCAVI

15 Electrical working data Nominal rated voltage U 0 / U V - kv 450/750-0,6/ Test voltage kv,5/4 Max AC voltage V - kv 540/900-0,7/, Max DC voltage kv,5 -,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5, Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius* mm 4 x D Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N G,5/,5KON,5,5, G,5/,5KON,9 4, 4,9 0 G4/4KON,4 5,8 6, G6/6KON,9 7,8 8, G0/0KON,8 0,8, G6/6KON 4,9,7 4, x5 + x6/ + KON 6, 9,6 0, x5 + x6/ + KON 7,,5, x50 + x5/ + KON 8,9 7,6 8, x70 + x5/ + KON 0,6 4, 44, x95 + x50/ + KON, 45,6 47, x0 + x70/ + KON,8 5,6 5, ARISTONCAVI 5

16 SUBFLAT SBNH-F Based on CEI EN Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound, GI quality according to VDE 007 part 0 cores identification According to HD 08 OUTER SHEATH MATERIAL: water resistant rubber compound, EM quality acc.to EN COLOUR: black APPLICATION Tough rubber unscreened 0.6/kV flat cable for installation inside or outside in dry, damp or wet environments and in hazardous environments (subject to local regulations). It can be immersed in fresh and salt water to a depth of 00 meters: for flexible power supplies, suitable for submersible motors and pumps. The synthetic rubber compound is ozone, UV, sunlight and weather resistant. 6 ARISTONCAVI

17 Electrical working data Nominal rated voltage U 0 / U kv 0,6/ Test voltage kv 4 Max AC voltage kv 0,7/, Max DC voltage kv,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius* FLAT mm x H (for H mm) 4 x H (for H > mm) Maximum tensile load N/mm 5 * (H = height) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- ARISTONCAVI 7

18 SUBFLAT CORES X CROSS SECTION CONDUCTOR MIN height MAX height MIN width MAX width Approx weight MAX TENSILE LOAD Nr x mm mm mm mm mm mm kg/km N G4,4 7,0 8,0 5,5 6, G6,9 7,5 8,5 7,5 8, G0,8 0,,0, 4, G6 4,9,, 8,0 9, G5 6, 4, 5,,0 4, G5 7, 6,0 7,5 7,0 8, G50 8,9 8,5 0,0 44, 45, G70 0,6 0,5,0 50,5 5, G95,,,9 57, 57, G0 4, 5, 5,9 6, 6, G50 5,5 6,8 7,6 67, 68, G85 7,0 8,6 9,4 7,6 7, ARISTONCAVI

19 CORES X CROSS SECTION CONDUCTOR MIN height MAX height MIN width MAX width Approx weight MAX TENSILE LOAD Nr x mm mm mm mm mm mm kg/km N 4G4,4 8,0 9,0,0 4, G6,9 8,5 9,5 4,5 5, G0,8 0,0,0 9,5 0, G6 4,9,0,0 4,5 5, G5 6, 5,8 7, 4, 4, G5 7, 8,6 9,4 48,6 49, G50 8,9 9,4 0, 56,8 57, G70 0,6 4,0 4,8 65,4 66, G95, 5,6 6,4 7,0 74, G0 4, 4, 5, 7,8 75, ARISTONCAVI 9

20 SNAKEFLEX NSSHÖU O/J DIN VDE 050 Part 8 approved Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 VDE 095 (IEC 608) INSULATION MATERIAL: GI quality rubber compound, according to VDE 007 Part 0 NOMINAL THICKNESS: according to VDE 050 Part 8 cores identification According to VDE 09 Part 08 (HD 08) INNER SHEATH MATERIAL: rubber compound GMb quality, according to VDE 007 Part 4 OUTER SHEATH MATERIAL: rubber compound 5GM5 quality, according to VDE 007 Part COLOUR: yellow 4 4 APPLICATION Heavy duty, flame retardant, abrasion, notch, tear, oils and fats resistant flexible cable for aggressive environments. Snakeflex is suitable for installation inside or outside in dry, damp or wet environments and in hazardous environments (subject to local regulations). It can be immersed in fresh water, salt water, waste water, storm water, oily water and sewage contaminated water to a depth of 00 meters. For power supplies and controlling in mines, quarries, industrial plants, agricultural applications and in general where mechanical stress and abrasion is likely. 0 ARISTONCAVI

21 Electrical working data Nominal rated voltage U 0 / U kv 0,6/ Test voltage kv Max AC voltage kv 0,7/, Max DC voltage kv,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius* mm Static condition: 4 x D Mobile condition: 5 x D Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- ARISTONCAVI

22 SNAKEFLEX CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 6, 7,0 60 x,5,9 7,0 7, x4,4 7,6 8, x6,9 8, 8, x0,8 9,5 0, x6 4,9 0,5, x5 6,,0, x5 7, 4, 4, x50 8,9 6, 6, x70 0,6 8, 9, x95, 0,5, x0 4,,8 4, x50 5,5 5,0 6, x85 7 8, 9, x40 9,5,, x00, 4,9 6, x,5,5,, x,5,9,5, 0 75 x4,4 4,9 5,5 0 0 x6,9 6,0 6, x0,8 9, 9, x6 4,9,, x5 6, 5,4 6, x,5,5,7, x,5,9,,7 55 x4,4 5,6 6, x6,9 6,8 7, x0,8 0,, x6 4,9,, x5 6, 6,9 8, x5 7, 0,, x50 8,9 5,8 7, x70 0,6 9, 40, x95, 45,7 47, x0 4, 48, 49, x50 5,5 5,6 54, x ,7 6, ARISTONCAVI

23 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N 4x,5,5,5, x,5,9 5, 5, x4,4 6,7 7, x6,9 8, 8, x0,8,9, x6 4,9 5, 6, x5 6, 0,6, x5 7,,8 4, x50 8,9 9,0 40, x70 0,6 4,8 44, x95, 49,9 5, x0 4, 55,6 57, x50 5,5 60,6 6, x ,4 69, x,5,5,4 4,0 70 5x,5,9 6,4 7, x4,4 8,0 8, x6,9 0,, x0,8,7 4, x6 4,9 7, 8, x5 6,, 4, x,5,5 6,9 7, x,5,5 9,6 0, x,5,5,, x,5,9 9, 9, x,5,9,, x,5,9 6,5 7, x,5 + x0,75,5 /,8 6, x,5 + x0,75,9 / 6,8 9, x,5 + x0,50,5 / 0,8 6, 8, x,5 + x0,75,5 / 6, 8, x,5 + x0,50,9 / 0,8 8,5, x,5 + x0,75,9 / 8,5, ARISTONCAVI

24 NAUTILUS 500 NAUTILUS 500 0,6/kV Based on CEI EN Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound, EI7 quality according to EN 506- and GI quality according to VDE 007 part 0 cores identification According to HD 08 INNER SHEATH MATERIAL: EPDM rubber compound 4 4 OUTER SHEATH MATERIAL: water resistant CPE based rubber compound COLOUR: black 4 APPLICATION NAUTILUS 500 is a 0.6/kV flexible cable suitable for permanent immersion to a depth of 500 meters in fresh, salt and polluted water where mobile laying is needed like power tools, submersible pumps etc. Available with steel armour for under-water power transmission in a fixed installation. The synthetic rubber compound is ozone, UV, sunlight and weather resistant. 4 ARISTONCAVI

25 Electrical working data Nominal rated voltage U 0 / U kv 0,6/ Test voltage kv 4 Max AC voltage kv 0,7/, Max DC voltage kv,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 500 Bending radius* mm Static condition: 4 x D Mobile condition: 6 x D Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- ARISTONCAVI 5

26 NAUTILUS 500 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 5,7 6,6 50 x,5,9 6,4 7, x4,4 7, 8, x6,9 8,0 9, x0,8 9,7 0, x6 4,9 0,9, x5 6,,8 4, x5 7, 4, 5, x50 8,9 6,8 8, x70 0,6 8,9 0, x95,,, 0 45 x0 4,,7 5, x50 5,5 5,7 7, x85 7,0 8,0 0, x40 9,5,, x00, 4,4 7, x, 7,7 8, x,5,5 8,5 9, x,5,9 0,, x4,4,4,6 0 0 x6,9,9 4, x0,8 7,5 9, x6 4,9 9,9, x5 6,,7 5, G, 8,4 9, G,5,5 9, 0, G,5,9,0, 00 G4,4,4, G6,9 4, 5, G0,8 9, 0, G6 4,9,8, G5 6, 5,8 8, G5 7, 8,7, G50 8,9,8 6, G70 0,6 8, 4, G95, 4,7 46, G0 4, 47,8 5, G50 5,5 5,9 56, G85 7,0 56,6 6, G40 9,5 6,9 69, ARISTONCAVI

27 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N 4G, 9, 0, G,5,5 0,4, G,5,9,4, G4,4 4,0 5, G6,9 6,0 7, G0,8,, G6 4,9,9 5, G5 6, 8,8, G5 7,,9 4, G50 8,9 8, 4, G70 0,6 4,0 46, G95, 49, 5, G0 4, 54,0 58, G50 5,5 57,9 6, G85 7,0 6, 68, G40 9,5 7, 77, G,5,5,5,7 0 5G,5,9,7 5, G4,4 5,6 7, G6,9 7,8 9, G0,8,4 5, G6 4,9 6,5 8, G5 6,,9 4, x,5,5 5,8 7, x,5,5 8, 9, x,5,5,5, x,5,9 8, 9, x,5,9,4, x,5,9 5,4 7, ARISTONCAVI 7

28 NAUTILUS 500 S NAUTILUS 500 S 0,6/kV Based on CEI EN Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound, EI7 quality according to EN 506- and GI quality according to VDE 007 part 0 cores identification According to HD 08 4 INNER SHEATH MATERIAL: EPDM based rubber compound 5 4 SCREEN MATERIAL: tinned copper braid 5 OUTER SHEATH MATERIAL: water resistant CPE based rubber compound COLOUR: black 4 5 APPLICATION Applications NAUTILUS 500S is a 0.6/kV overall screened cable suitable for permanent immersion to a depth of 500 meters in fresh, salt and polluted water where mobile laying is needed, like power tools, submersible pumps etc. Available with steel armour for under-water power transmission in a fixed installation. The synthetic rubber compound is ozone, UV, sunlight and weather resistant. 8 ARISTONCAVI

29 Electrical working data Nominal rated voltage U 0 / U kv 0,6/ Test voltage kv 4 Max AC voltage kv 0,7/, Max DC voltage kv,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 500 Bending radius* mm 4 x D Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N G,5/,5KON,5,5, G,5/,5KON,9 4, 4,9 0 G4/4KON,4 5,8 6, G6/6KON,9 7,8 8, G0/0KON,8 0,8, G6/6KON 4,9,7 4, x5 + x6/ + KON 6, 8, 9, x5 + x6/ + KON 7, 0,, x50 + x5/ + KON 8,9 6, 7, x70 + x5/ + KON 0,6 4, 4, x95 + x50/ + KON, 44, 45, x0 + x70/ + KON 4, 50,7 5, ARISTONCAVI 9

30 MARINE RG7OEFE-0,6/kV Based on CEI 0-, IEC Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class IEC 608 INSULATION MATERIAL: cross-linked HEPR compound, G7 quality cores identification According to HD 08 INNER SHEATH MATERIAL: polyethylene 4 ARMOURING MATERIAL: galvanized steel wires, spiral galvanized steel tape 4 5 OUTER SHEATH MATERIAL: polyethylene COLOUR: black APPLICATION Marine cable is a 0.6/kV underwater cable designed to be laid on the sea bed in fixed installation. Marine cables require special designs that are able to withstand specific environmental conditions: external pressure and mechanical stress during laying operations or during service life. The specific type of armouring of this cable guarantees operations for deep-laying with an external pressure measuring up to 0 bar (approx 00 meters). The typical use is underwater power transmission in fresh or salt water. The type and quality of the material used for the outer sheath provide excellent ultraviolet resistance. 0 ARISTONCAVI

31 Electrical working data Nominal rated voltage U 0 / U kv 0,6/ Test voltage kv 4 Max AC voltage kv 0,7/, Max DC voltage kv,8 Current rating A According to CEI 0-, IEC 6087 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Static condition: - 0 Mechanical working data Maximum water depth m 00 Bending radius* mm Static condition: 4 x D Maximum tensile load N/mm 75 (acc.to CEI -7) * (D = outer diameter) Chemical working data Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water ARISTONCAVI

32 MARINE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N G5 5,9,5 4, G5 6,9 6,0 7, G50 8,0 9, 40, G70 9,6 46,4 48, G95,4 50,7 5, G0,0 56,0 57, G50 4, 6,4 6, G85 6, 67, 69, G40 8,4 74,6 77, G5 5,9 6, 7, G5 6,9 8,7 9, G50 8,0 44,8 46, G70 9,6 50, 5, G95,4 55,0 56, G0,0 6,7 64, G50 4, 66,9 69, G85 6, 74, 76, G40 8,4 8, 84, x5 + 5N 6,9 8, 9, x50 + 5N 8,0 4, 44, x70 + 5N 9,6 47,8 49, x N,4 5,5 54, x0 + 70N,0 59, 6, x N 4, 64, 66, ARISTONCAVI

33 ARISTONCAVI

34 DRINCABLE 07 / DRINCABLE DRINCABLE 450/750 V - DRINCABLE 0,6/ kv Based on CEI EN ACS - WRAS approved Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound: EI6 quality (450/750V) acc.to EN 506-, GI quality (0,6/kV) acc.to VDE 007 part 0 cores identification According to HD 08 OUTER SHEATH MATERIAL: special cross-linked compound, EM6 quality (related to mechanical and thermal property) according to EN COLOUR: blue APPLICATION Flexible NON TOXIC, WATERPROOF and SUBMERSIBLE (up to 600 meters depth) electric cable, with special rubber insulation and outer sheath, suitable for permanent immersion in drinking water. The exceptional performance of Aristoncavi DRINCABLE is provided by the unique and proprietary compound used for the outer sheath. The cables have successfully passed rigorous testing and are fully qualified to the British WRAS certification, the French ACS certification for direct and permanent immersion in potable water and are respecting the Italian DM 74/04. The approval protocols have verified the absence of microbial growth, the water taste, appearance, transparency and colour and the absence of any metals or toxic substances. On request DRINCABLE is also available with a rated voltage of 0,6/kV and in flat version (FL family). For submersible pumps for drinking water, operation and control equipment in aquariums, fish-ponds, operation of control, depuration/chlorination systems installed in water main and drinking water fountains, electrical installations in manufacturing, processing and preserving systems of drinks and foodstuff, swimming pool lightings, depuration and cleaning system. 4 ARISTONCAVI

35 Electrical working data Nominal rated voltage U 0 / U V - kv 450/750-0,6/ Test voltage kv,5-4 Max AC voltage V - kv 540/900-0,7/, Max DC voltage kv,5 -,8 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 600 Static condition: x D ROUND mm Mobile condition: 5 x D Bending radius* x H ( for H mm) FLAT mm 4 x H ( for H > mm) Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Chemicals resistance Acid and alkaline solution acc.to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water ARISTONCAVI 5

36 DRINCABLE 07 / DRINCABLE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 5,7 6,6 45 x,5,9 5,9 6, x4,4 6,5 7, x6,9 7,4 8, x0,8 8,6 9, x6 4,9 0,0, 0 40 x5 6,,9, 0 75 x5 7,,0 4, x50 8,9 5,7 7, x70 0,6 7,8 9, x95, 0,7, x0 4,, 4, x50 5,5 4,0 6, x85 7,0 8,0 0, x40 9,5,, x00, 4,4 7, x, 8,0 8, x,5,5 9,0 0, x,5,9 0,7, x4,4,, 0 0 x6,9,6 4, x0,8 8, 9, x6 4,9 0,5, x5 6, 4,4 6, G,5,5 9,7 0, G,5,9,5,6 90 G4,4 4, G6,9 4,6 5, G0,8 9,7, G6 4,9, 4, G5 6, 6, 8,7 0 5 G5 7, 8,8, G50 8,9,8 6, G70 0,6 7,9 40, G95, 4,5 47, G0 4, 47,5 5, G50 5,5 5,8 56, G85 7,0 56,5 6, ARISTONCAVI

37 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N 4G,5,5 0,7, G,5,9,7, G4,4 4, 5, G6,9 6, 7, G0,8,5, G6 4,9 4, 6, G5 6, 9,, G5 7,,0 4, G50 8,9 9, 4, G70 0,6 4, 45, G95, 48,9 5, G0 4, 5,0 57, G50 5,5 57,9 6, G85 7,0 6, 68, FLAT CABLE CORES X CROSS SECTION CONDUCTOR MIN height MAX height MIN width MAX width Approx weight MAX TENSILE LOAD Nr x mm mm mm mm mm mm kg/km N G4,4 7,0 8,0 5,5 6, G6,9 7,5 8,5 7,5 8, G0,8 9,9 0,9,9, G6 4,9,0,0 8,0 9, G5 6, 4,0 5,0,0 4, G5 7, 6,0 7,5 7,0 8, G50 8,9 8,5 0,0 44, 45, G70 0,6 0,5,0 50,5 5, G95,,,9 57, 57, G0 4, 5, 5,9 6, 6, G50 5,5 6,8 7,6 67, 68, G85 7,0 8,6 9,4 7,6 7, G4,4 8,0 9,0,0 4, G6,9 8,5 9,5 4,5 5, G0,8 0,0,0 9,5 0, G6 4,9,0,0 4,5 5, G5 6, 5,8 7, 4, 4, G5 7, 8,6 9,4 48,6 49, G50 8,9 9,4 0, 56,8 57, G70 0,6 4,0 4,8 65,4 66, G95, 5,6 6,4 7,0 74, G0 4, 4, 5, 7,8 75, ARISTONCAVI 7

38 DRINCABLE 800 ACS - KTW - DVGW W70 - WRAS approved Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 and VDE 095 INSULATION MATERIAL: EPR compound: EI7 quality according to EN 506-, GI quality according to VDE 007 part 0, R-EP-90 quality acc. to AS/NZS 808 cores identification According to HD 08 OUTER SHEATH INNER LAYER MATERIAL: special waterproof compound (if present) OUTER LAYER MATERIAL: special cross-linked compound, 5GM (acc. to VDE 007 part ) - EM quality (acc.to EN 506--) for mechanical and themal properties COLOUR: blue APPLICATION DRINCABLE 800 is a flexible electrical cable no toxic, weather resistant (indoor and outdoor use), waterproof and submersible up to 800 meters, with special rubber insulation and outer sheath that makes the cable suitable for permanent immersion in drinking water. The exceptional performance of Aristoncavi DRINCA- BLE 800 is provided by the unique and proprietary compound used for the outer sheath. The cable has successfully passed rigorous testing and is fully qualified for direct and permanent immersion in potable water: they are fulfilled requirements of health according to the German KTW-Recommendation, the requirements of the growth of microorganism according to German DVGW W70 Technical Standard and according to the ACS French law (Attestation de Conformité Sanitaire), moreover it also fulfilled the British Water Regulations Advisory Scheme WRAS. The cable is also respecting the Italian DM 74/04. The absence of microbial growth, the effects on water taste and appearance, the absence of any metals and toxic substances, are been tested and certified in the above protocols. The main fields of application are submersible pumps for drinking water, depuration/chlorination systems, operation and control equipment in aquarium, processing and preserving systems of drinks and foodstuff, swimming pool lightings. The cable can also be used for applications where improved chemical and abrasion resistance is required, as submersible pumps in mining application and for all the needs related the connections of electrical equipment used in presence of water. The chemical resistance of DRINCABLE 800 makes it suitable for use even in contact with waste water, where the contact with a wide range of substances is allowed (to be checked case by case). The DRINCABLE 800 is also available in flat version (FL family). 8 ARISTONCAVI

39 Electrical working data Nominal rated voltage U 0 / U V 0,6/ Test voltage kv 4 Max AC voltage kv 0,7/, Max DC voltage kv,8 Current rating A According to VDE Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 800 Static condition: x D ROUND mm Mobile condition: 5 x D Bending radius* x H ( for H mm) FLAT mm 4 x H ( for H > mm) Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Chemicals resistance Acid and alkaline solution acc.to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water ARISTONCAVI 9

40 DRINCABLE 800 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 5, 5,9 5 x,5,9 5,9 6, x4,4 6,5 7, x6,9 7,4 8, x0,8 8,6 9, x6 4,9 0,0, x5 6,,9, x5 7,,0 4, x50 8,9 5,7 7, x70 0,6 7,8 9, x95, 0,7, x0 4,, 4, x50 5,5 4,0 6, x85 7,0 5,7 7, x40 9,5 8,6, x00,,7 4, x400 5, 5, 7, x500 9,5 40,5 4, G,5,5 8,8 9, G,5,9 0,0, 80 G4,4,, G6,9,5, G0,8 5,9 7, G6 4,9 8, 0, G5 6,,7 4, G5 7, 5,6 7, G50 8,9 0,, G70 0,6 4,7 7, G95, 9,0 4, G0 4, 44,0 47, G50 5,5 48,6 5, G85 7,0 5, 57, G40 9,5 60,0 64, G00, 67,0 7, ARISTONCAVI

41 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N 4G,5,5 9,6 0, G,5,9,, G4,4,6, G6,9 4,0 5, G0,8 7,8 9, G6 4,9 0,, G5 6, 5, 7, G5 7, 8, 0, G50 8,9,4 6, G70 0,6 8,5 4, G95, 4,6 47, G0 4, 48,8 5, G50 5,5 54, 58, G85 7,0 59,6 6, G40 9,5 66,9 70, FLAT CABLE CORES X CROSS SECTION CONDUCTOR MIN height MAX height MIN width MAX width Approx weight MAX TENSILE LOAD Nr x mm mm mm mm mm mm kg/km N G, 5,8 6,8,5, G,5,5 6,0 7,0,, 0 68 G,5,9 6,7 7,7 4, 5, 60 G4,4 7, 8, 6,0 7, G6,9 7,8 9,0 7,7 8, G0,8 9,4,4,9, G6 4,9,, 5,6 7, G, 5,8 6,8 4,5 5, G,5,5 6,0 7,0 5,0 6, G,5,9 6,5 8,0 7,6 9, G4,4 7,0 8,7 0,, G6,9 8,0 0,0,9 4, x + G, 5,0 5,6 5,6 6, 0 60 x,5 + G,5,5 5, 5,8 6,5 7, x,5 + G,5,9 6,0 6,8 0,0 0, x4 + G4,4 6,6 7,4,8, ARISTONCAVI 4

42 OERRE H07RN-F OR Based on CEI EN Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: rubber compound cores identification According to HD 08 OUTER SHEATH MATERIAL: oil resistant rubber compound COLOUR: black APPLICATION For power and control, the cables can be installed in dry, damp or wet environments, in polluted and oily environments and in hazardous environments (subject to local regulations). 4 ARISTONCAVI

43 Electrical working data Nominal rated voltage U 0 / U V 450/750 Test voltage kv,5 Max AC voltage V 540/900 Max DC voltage kv,5 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Bending radius* mm Maximum tensile load N/mm 5 * (D = outer diameter) Static condition: 4 x D Mobile condition: 6 x D Chemical working data Oil resistance According to IEC Ozone resistance According to IEC UV resistance According to ISO 489- Behaviour in water Suitable for immersion in sea and brackish water Burning behaviour According to IEC 60-- ARISTONCAVI 4

44 OERRE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 5,7 6,6 55 x,5,9 6,4 7, x4,4 7, 8, x6,9 8,0 9, x0,8 9,7 0, x6 4,9 0,9, x5 6,,8 4, x5 7, 4, 5, x50 8,9 6,8 8, x70 0,6 8,9 0, x95,,, x0 4,,7 5, x50 5,5 5,7 7, x85 7,0 8,0 0, x40 9,5,, x00, 4,4 7, x, 7,7 8, x,5,5 8,5 9, x,5,9 0,, x4,4,4,6 0 0 x6,9,9 4, x0,8 7,5 9, x6 4,9 9,9, x5 6,,7 5, G, 8,4 9, G,5,5 9, 0, G,5,9,0, 00 G4,4,4, G6,9 4, 5, G0,8 9, 0, G6 4,9,8, G5 6, 5,8 8, G5 7, 8,7, G50 8,9,8 6, G70 0,6 8, 4, 0 50 G95, 4,7 46, G0 4, 47,8 5, G50 5,5 5,9 56, G85 7,0 56,6 6, G40 9,5 6,9 69, ARISTONCAVI

45 CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N 4G, 9, 0, G,5,5 0,4, G,5,9,4, G4,4 4,0 5, G6,9 6,0 7, G0,8,, G6 4,9,9 5, G5 6, 8,8, G5 7,,9 4, G50 8,9 8, 4, G70 0,6 4,0 46, G95, 49, 5, G0 4, 54,0 58, G50 5,5 57,9 6, G85 7,0 6, 68, G40 9,5 7, 77, G,5,5,5,7 0 5G,5,9,7 5, G4,4 5,6 7, G6,9 7,8 9, G0,8,4 5, G6 4,9 6,5 8, G5 6,,9 4, x,5,5 5,8 7, x,5,5 8, 9, x,5,5,5, x,5,9 8, 9, x,5,9,4, x,5,9 5,4 7, ARISTONCAVI 45

46 TERMALE 07BN-F Based on CEI EN Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 IEC 608 INSULATION MATERIAL: EPR compound cores identification According to HD 08 OUTER SHEATH MATERIAL: chlorinated polyethylene based elastomer COLOUR: orange APPLICATION Specially designed cable for use in high temperature and chemically aggressive and thermal water to 85 C at depth up to 00 meters. For power supplies of pumps. Also recommended for use in construction yards, mining and industry. 46 ARISTONCAVI

47 Electrical working data Nominal rated voltage U 0 / U kv 450/750 Test voltage kv,5 Max AC voltage kv 540/900 Max DC voltage kv,5 Current rating A See table p. 6 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius* mm Static condition: 4 x D Mobile condition: 6 x D Maximum tensile load N/mm 5 * (D = outer diameter) Chemical working data Oil resistance According to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water UV resistance According to ISO 489- Burning behaviour According to IEC 60-- ARISTONCAVI 47

48 TERMALE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x,5,5 5,9 6,5 55 x,5,9 6,6 7, 70 8 x4,4 7,4 7, x6,9 8, 8, x0,8 9,9 0, x6 4,9,, x5 6,,0, x5 7, 4,5 5, x50 8,9 7,0 7, x70 0,6 9, 9, x95,,0, x0 4, 4, 5, x50 5,5 6,7 7, x85 7 9, 0, x40 9,5,, x00, 9,5 40, x, 7,8 8, 85 0 x,5,5 8,8 9, x,5,9 0,5, x4,4,8, 0 0 x6,9,4 4, x0,8 8,0 8, x6 4,9 0,, x5 6, 4,0 5, G, 8,5 9, G,5,5 9,5 0, G,5,9,,9 00 G4,4,8, G6,9 4,4 4, G0,8 9,4 0, G6 4,9,8, G5 6, 5,8 6, G5 7, 8, 9, G50 8,9, 4, G70 0,6 7, 8, G95, 4,7 44, G0 4, 46,6 48, G50 5,5 5,8 5, G ,0 58, G40 9,5 6,8 66, G00, 70,6 7, ARISTONCAVI

49 ARISTONCAVI 49

50 URSUS MT SUB PLUS,6/6 /0 kv (N)TSCGEWÖU Based on DIN VDE 050 Part 8 Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 VDE 095 (IEC 608) (*) INSULATION MATERIAL: GI quality rubber compound, according to VDE 007 Part 0 SEMICONDUCTIVE LAYERS: semiconductive tape over the conductor and inner and outer semiconductive rubber layer on the insulation EARTH CONDUCTORS MATERIAL: tinned copper CONSTRUCTION: class 5 VDE 095 (IEC 608) (*) COVERING MATERIAL: semiconductive layer CENTRAL FILLER MATERIAL: semiconductive compound on textile polyester support cores ASSEMBLY ASSEMBLY: twisted cores with earth conductor split into parts SEPARATOR ON THE TWISTED ASSEMBLY: semiconductive tape around the twisted cores 4 4 INNER SHEATH MATERIAL: special EPR compound waterproof proofing GMb quality, according to VDE 007 Part THICKNESS: according to VDE 050 Part 8 (table ) OUTER SHEATH MATERIAL: special CM rubber compound waterproof proofing 5GM quality, according to VDE 007 Part THICKNESS: according to VDE 050 Part 8 (table ) COLOUR: black * Special construction to get improved flexibility 4 APPLICATION Heavy duty flexible medium voltage power cable designed for permanent immersion in fresh or salt water where mechanical stress is likely. Suitable for immersion at depths to 00 meters. For pumps, dredgers, floating docks and for trailing operations with opencast mining equipment. The cable is unarmoured and therefore is not suitable for under-water power transmission or installation in a waterway or where mechanical damage is possible. 50 ARISTONCAVI

51 Electrical working data Nominal rated voltage U 0 / U kv,6/6 6/0 8,7/5 /0 Test voltage kv Max AC voltage kv 4,/7, 6,9/ 0,4/8,9/4 Inner and outer semiconductive layers extruded Electrical field control in a single-pass with the insulation Current rating A According to VDE 098 Part 4 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius mm According to VDE 098 Par t Maximum tensile load* N/mm 0 * Referred to the total phase conductors cross section Chemical working data Burning behaviour Flame retardant according to IEC 60-- Oil resistance According to IEC Ozone resistance According to IEC UV resistance According to ISO 489- Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water ARISTONCAVI 5

52 URSUS MT SUB PLUS,6/6 /0 kv VOLTAGE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD kv Nr x mm mm mm mm kg/km N,6/6 x5 + x5/ 6,9 9,9 4, ,6/6 x5 + x5/ 7,8 4,9 44, ,6/6 x50 + x5/ 9, 46,0 47, ,6/6 x70 + x5/, 49,8 5, ,6/6 x95 + x50/,7 55,8 57, ,6/6 x0 + x70/ 4,5 59,6 6, ,6/6 x50 + x70/ 6,7 66,0 68, ,6/6 x85 + x95/ 7,6 67,9 70, /0 x5 + x5/ 6,9 9,9 4, /0 x5 + x5/ 7,8 4,9 45, /0 x50 + x5/ 9, 46,0 48, /0 x70 + x5/, 49,8 5, /0 x95 + x50/,7 55,8 58, /0 x0 + x70/ 4,5 59,6 6, /0 x50 + x70/ 6,7 66,0 69, /0 x85 + x95/ 7,6 67,9 70, ,7/5 x5 + x5/ 6,9 47, 49, ,7/5 x5 + x5/ 7,8 48,8 50, ,7/5 x50 + x5/ 9, 5,7 55, ,7/5 x70 + x5/, 57,5 59, ,7/5 x95 + x50/,7 60,8 6, ,7/5 x0 + x70/ 4,5 66,4 68, ,7/5 x50 + x70/ 6,7 7,0 7, ,7/5 x85 + x95/ 7,6 7, 75, /0 x5 + x5/ 6,9 5,0 5, /0 x5 + x5/ 7,8 55, 57, /0 x50 + x5/ 9, 58,4 60, /0 x70 + x5/, 6, 64, /0 x95 + x50/,7 67, 69, /0 x0 + x70/ 4,5 7,0 7, ARISTONCAVI

53 ARISTONCAVI 5

54 URSUS MT SUB-E PLUS,6/6 /0 kv (N)TSCGECEWÖU Based on DIN VDE 050 Part 8 Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 VDE 095 (IEC 608) (*) INSULATION MATERIAL: GI quality rubber compound, according to VDE 007 Part 0 SEMICONDUCTIVE LAYERS: semiconductive tape over the conductor and inner and outer semiconductive rubber layer on the insulation PROTECTIVE EARTH CONDUCTORS MATERIAL: bare copper CONSTRUCTION: individual copper braid CENTRAL FILLER MATERIAL: rubber compound on textile polyester support cores ASSEMBLY ASSEMBLY: twisted cores SEPARATOR ON THE TWISTED ASSEMBLY: semiconductive tape wound on the twisted cores 4 4 INNER SHEATH MATERIAL: special EPR rubber compound water proofing GMb quality, according to VDE 007 Part THICKNESS: according to VDE 050 Part 8 (table ) OUTER SHEATH MATERIAL: special CM rubber compound water proofing 5GM quality, according to VDE 007 Part THICKNESS: according to VDE 050 Part 8 (table ) COLOUR: black * Special construction to get improved flexibility 4 APPLICATION Flexible energy supply cable for use in permanent immersion in water under high mechanical stresses: pumps, dredgers, float ingdocks, etc. It is suitable for immersion up to 00 m depth and for trailing operations of opencast mining equipment. 54 ARISTONCAVI

55 Electrical working data Nominal rated voltage U 0 / U kv,6/6 6/0 8,7/5 /0 Test voltage kv Max AC voltage kv 4,/7, 6,9/ 0,4/8,9/4 Inner and outer semiconductive layers extruded in a single pass Electrical field control with the insulation and the screen over every conductor Current rating A According to VDE 098 Part 4 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius mm According to VDE 098 Par t Maximum tensile load* N/mm 5 * Referred to the total phase conductors cross section Chemical working data Burning behaviour Flame retardant according to IEC 60-- Oil resistance According to IEC Ozone resistance According to IEC UV resistance According to ISO 489- Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water ARISTONCAVI 55

56 URSUS MT SUB-E PLUS,6/6 /0 kv VOLTAGE CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD kv Nr x mm mm mm mm kg/km N,6/6 x5 + x5/e 6,8 4,4 45, 80 5,6/6 x5 + x5/e 7,8 45,0 46, ,6/6 x50 + x5/e 9,4 48, 49, ,6/6 x70 + x5/e, 5,7 55, ,6/6 x95 + x50/e,7 58,4 60, ,6/6 x0 + x70/e 4,4 6,9 65, ,6/6 x50 + x70/e 6, 69, 7, ,6/6 x85 + x95/e 7,6 7, 74, /0 x5 + x5/e 6,8 4,4 45, /0 x5 + x5/e 7,8 45,0 47, /0 x50 + x5/e 9,4 48, 50, /0 x70 + x5/e, 5,7 56, /0 x95 + x50/e,7 58,4 60, /0 x0 + x70/e 4,4 6,9 65, /0 x50 + x70/e 6, 69, 7, /0 x85 + x95/e 7,6 7, 75, ,7/5 x5 + x5/e 6,8 49,4 5, ,7/5 x5 + x5/e 7,8 50,9 5, ,7/5 x50 + x5/e 9,4 55,8 57, ,7/5 x70 + x5/e, 59,6 6, ,7/5 x95 + x50/e,7 6, 65, ,7/5 x0 + x70/e 4,4 69,8 7, /0 x5 + x5/e 6,8 55,9 57, /0 x5 + x5/e 7,8 57, 59, /0 x50 + x5/e 9,4 60,5 6, /0 x70 + x5/e, 66, 67, /0 x95 + x50/e,7 69,8 7, ARISTONCAVI

57 ARISTONCAVI 57

58 DRINCABLE MT PLUS,6/6 kv DRINCABLE MT PLUS,6/6 kv Based on DIN VDE 050 Part 8 - ACS / WRAS / D.M. 74/04 Phase Conductors MATERIAL: tinned copper CONSTRUCTION: class 5 VDE 095 (IEC 608) (*) INSULATION MATERIAL: GI quality rubber compound, according to VDE 007 Part 0 INSULATION THICKNESS: according to VDE 050 Part 8 table SEMICONDUCTIVE LAYERS: semiconductive tape over the conductor and inner and outer semiconductive rubber layer on the insulation EARTH CONDUCTORS MATERIAL: tinned copper CONSTRUCTION: class 5 VDE 095 (IEC 608) (*) COVERING MATERIAL: semiconductive layer CENTRAL FILLER MATERIAL: semiconductive compound on textile polyester support cores ASSEMBLY ASSEMBLY: twisted cores with earth conductor split into parts SEPARATOR ON THE TWISTED ASSEMBLY:,8/ kv: semiconductive tape around the twisted cores OUTER SHEATH MATERIAL: special cross-linked compound, EM6 quality according to EN THICKNESS: according to VDE 050 Part 8 (table ) COLOUR: blue * Special construction to get improved flexibility APPLICATION Flexible energy supply cable for use in permanent immersion in drinking water, rain water, cooling water, sea water, river water and in environmentally sensitive environments. The exceptional performance of Aristoncavi DRINCABLE MT PLUS is provided by the unique and proprietary compounds used for the outer sheath. The cables have successfully passed rigorous testing and are fully qualified to the British WRAS certification, the French ACS certification for direct and permanent immersion in potable water and are respecting the Italian DM 74/04. The approval protocols have verified the absence of microbial growth, the water taste, appearance, transparency and colour and the absence of any metals or toxic substances. Suitable for power supply to pumps, dredgers, floating docks and can be used for immersion at depths to 00 meters. Beeing the cable unarmoured, it is not suitable for under-water power transmission or installation in a waterway or where mechanical damage is possible. 58 ARISTONCAVI

59 Electrical working data Nominal rated voltage U 0 / U kv,6/6 Test voltage kv Max AC voltage kv 4,/7, Electrical field control kv Inner and outer semiconductive layers extruded in a single-pass with the insulation Current rating A According to VDE 098 Part 4 Thermal working data Maximum short circuit temperature C 50 Maximum working temp. on the conductor C 90 Minimum ambient temperature C Mobile condition: - 5 Static condition: - 40 Mechanical working data Maximum water depth m 00 Bending radius* mm according to VDE 098 Part Maximum tensile load N/mm 5 * Referred to the total phase conductors cross section Chemical working data Chemicals resistance Acid and alkaline solution acc.to IEC Ozone resistance According to IEC Behaviour in water Water resistance test acc.to EN (AD8 condition) and AC internal test, suitable for immersion in sea and brackish water CORES X CROSS SECTION CONDUCTOR MIN OVERALL MAX OVERALL APPROX WEIGHT MAX TENSILE LOAD Nr x mm mm mm mm kg/km N x5 + x5/ 6,8 9,9 4, x5 + x5/ 7,8 4,9 44, x50 + x5/ 9,4 46,0 47, x70 + x5/, 49,8 5, x95 + x50/,7 55,8 57, x0 + x70/ 4,4 59,6 6, x50 + x70/ 6, 66,0 68, x85 + x95/ 7,6 67,9 70, ARISTONCAVI 59

60 60 ARISTONCAVI

61 ARISTONCAVI 6

62 Technical data Electrical resistance Electrical resistance Ohm/km ( according to IEC VDE 095 ) Crosssection mm² Flexible conductors, resistance at 0 C Flexible conductors, resistance at 90 C RIGID CONDUCTORS, RESISTANCE AT 0 C RIGID CONDUCTORS, RESISTANCE AT 90 C Bare copper Tinned copper Bare copper Tinned copper Bare copper Tinned copper Bare copper Tinned copper,5,0,70 6,9 7,44,, 5,40 5,5,5 7,98 8, 0,6 0,45 7,4 7,56 9,4 9,6 4 4,95 5,09 6,0 6,48 4,6 4,70 5,87 5,98 6,0,9 4,0 4,,08,,9,96 0,9,95,4,48,8,84,,4 6,,4,54,58,5,6,46,48 5 0,78 0,795 0,99,0 0,77 0,74 0,95 0,94 5 0,554 0,565 0,705 0,79 0,54 0,59 0,667 0, ,86 0,9 0,49 0,500 0,87 0,9 0,49 0, ,7 0,77 0,46 0,5 0,68 0,7 0,4 0, ,06 0,0 0,6 0,67 0,9 0,95 0,46 0,48 0 0,6 0,64 0,05 0,09 0,5 0,54 0,95 0, ,9 0, 0,64 0,68 0,4 0,6 0,58 0, ,06 0,08 0,5 0,7 0,099 0,00 0,6 0,7 40 0,080 0,087 0,0 0,04 0,0754 0,076 0,0960 0, ,064 0,0654 0,086 0,08 0,060 0,0607 0,0765 0, ,0486 0,0495 0,069 0,060 0,0470 0,0475 0,0598 0, ,084 0,09 0,0489 0,0498 0,066 0,069 0,0466 0, ,087 0,09 0,065 0,07 0,08 0,086 0,060 0,064 6 ARISTONCAVI

63 CORRECTION FACTORS Ambient temp.( C) Factor,5,,08,04 0,96 0,9 0,87 0,8 0,76 0,7 0,65 0,58 0,5 0,4 0,9 CURRENT CARRYING CAPACITY ( LOW VOLTAGE CABLES) Conductor service temperature 90 C Ambient air/water temperature 0 C - 4 cores cable cores loaded ROUND CABLES FLAT CABLES Cross section Laying in free air Laying in water Laying in free air Laying in water Max short circuit current (s) mm A A A A ka, ,5, , , , , , , , , , , , , , , ,900 ARISTONCAVI 6

64 Chemical resistance oil resistance (by Specification Number) oil resistance (by type name) Mineral oil test IEC MIL-L-644 B MIL-L-04 B MIL-G-08 MIL-L-50 A MIL-L50 MIL-L-545 B MIL-C-49 C MIL-L568 A MIL-L46000 A MIL-H-5606 B hydraulic oil mineral oil transformer oil vegetable oil linseed oil olive oil red oil (MIL-H-5606) silicon oil soybean oil turbine oil SUBMERSIBLE YES SUBMERSIBLE S YES SUBFLAT YES SNAKEFLEX YES NAUTILUS 500 YES NAUTILUS 500 S YES MARINE NO DRINCABLE NO DRINCABLE 800 NO OERRE YES TERMALE YES URSUS MT SUB PLUS YES URSUS MT SUB-E PLUS YES DRINCABLE MT PLUS YES little influence on the material (suitable for use, for prolonged contact or immersion) moderate deterioration of the characteristics (fit for use) characteristics severe decay (use not recommended: eventually to be checked conditions and timing of contact) 64 ARISTONCAVI

65 other liquid resistance acetic acid - solution 0% acetic acid ammonium chloride benzene diesel ethanol ethylene glycol gasoline hydrochloric acid kerosene milk nitrates, sulphates salt solution soda toluene turpentine water - fresh water - sea water - sewerage water - waste industrial wine bleach NaClO coke oven gas hydrogen sulphide (diluite) methanol nitric acid (diluite) phosphoric acid (60%) sodium hydroxide (5%) citric acid diacetone alchol ozone sulfur acetaldehyde not usable to be verified in relation to the chemical main components ARISTONCAVI 65

66 NOTE

67 CSQ: this certified that Aristoncavi S.p.A. implements a quality system in conformity with the standard UNI EN ISO 900 to ensure quality in design, development, manufacture, selling/marketing and installation of the product.