Matthew J. Perricone, Ph.D.

Transcription

1 Matthew J. Perricone, Ph.D. Title: Principal Investigator and Team Lead, Technical Consulting Group Education: Ph.D. Materials Science & Engineering, Lehigh University, 2005 M.S. Materials Science & Engineering, Lehigh University, 2003 B.S. Materials Science and Engineering, Lehigh University, 2000 Employment History: 2007 Present RJ Lee Group, Inc Sandia National Laboratories, Senior Member Technical Staff, Joining and Coatings Department Lehigh University, Graduate Research Assistant & Graduate Consultant, Department of Materials Science & Engineering Summary Project management and analysis of complex multi analytical technique data sets for materials failure and quality assurance projects. Root cause failure analyses for multiple clients from various industrial sectors in support of product development, performance optimization and conflict resolution. Conducted studies of corrosion impact on a variety of materials including impact of World Trade Center dust on building components, corrosive effects of chlorine from a chemical spill to industrial & residential properties, and corrosion of HVAC systems in high humidity climates. Extensive experience in the areas of solidification and microstructural analysis, particularly welding related. Engineering support related to welding process development and materials selection to production facilities. Alloy development to determine a welding solution for high alloy stainless steel materials for applications in marine environments. Evaluation of fusion zone corrosion resistance of various alloys and welding processes according to ASTM standards. Calculation of multi component phase diagrams to direct alloy development efforts, model solidification, and anticipate phase transformation behavior. Direct research in the general areas of physical metallurgy, welding and joining, and solidification. Experimental program design, analytical procedure development, and laboratory analysis for industrial customers. Experience with the use of analytical techniques such as scanning electron microscopy, electron backscattered diffraction, differential scanning calorimetry, transmission electron microscopy and x ray diffraction.

2 Curriculum Vitae November, Industry Sectors Served: Medical Devices spinal implants, cardiac stents, dental implants and crowns Government Department of Energy, Department of Defense Corrosion impact on materials imported Chinese manufactured drywall, World Trade Center collapse, train derailments with HAZMAT spill Power generation high temperature corrosion, failure analysis, component wear, remaining life assessment Steel making manufacturing control, failure analysis, process and product development Welding Alloy development, microstructural control, identifying particulate in lung tissue Consumer Products patent infringement, identification of trace contaminants, lead in paint and other materials Honors, Awards, Fellowships & Memberships: NACE International 2010 to Present ASM International Member, Chapter Council Chair and Representative District X, Volunteerism Committee, Past Chair Emerging Professionals Committee, 2008 Nominating Committee, Chair Albuquerque Chapter American Welding Society (AWS) Member, 2008 AWS William Spraragen Memorial Award, Graduate Research Fellowship The Minerals, Metals, and Materials Society (TMS) Member (through 2007) Sandia National Laboratories Employee Recognition Award, Laser Welding 2007 National Defense Science and Engineering Graduate Fellowship Lehigh University Engineering Fellowship Publications & Presentations Norris, J.T., C.V. Robino, D.A. Hirschfeld, and M.J. Perricone, Effects of Laser Parameters on Porosity Formation: Investigating Millimeter Scale Continuous Wave Nd: YAG Laser Welds. Welding Journal, Vol. 90, Number 10, 198s 203s, October Perricone, M.J., Accelerated Alloy Development and Process Optimization through the Combination of Calculated Multi Component Phase Diagrams, 2011 Corrosion Solutions Conference (CSC11), Lake Louise, Alberta, Canada, September 25 30, 2011 (Platform Presentation). Perricone, M.J., Material Failures: The Importance of Validating First Impressions, 2011 Corrosion Solutions Conference (CSC11), Lake Louise, Alberta, Canada, September 25 30, 2011 (Platform Presentation). Perricone, M.J., J. N. Dupont, T. D. Anderson, C. V. Robino and J. R. Michael, An Investigation of the Massive Transformation from Ferrite to Austenite in Laser Welded Mo Bearing Stainless Steels. Metallurgical and Materials Transactions, Volume 42, Number 3, , February 2011.

3 Curriculum Vitae November, Lienert, T.J., A. O Brien, M.C. Balmforth, S.D. Brandi, J.F. Grubb, P.W. Hochanadel, L. Li, M.J. Perricone, P. Stratton, Chapter 5: Stainless and Heat Resistant Steels. 9th Edition, AWS Welding Handbook, Volume 4: Materials and Applications, Part 1, American Welding Society, Norris, J. T., C.V. Robino, M.J. Perricone, and D. A. Hirschfeld, Development of a Time Resolved Energy Absorption Measurement Technique for Laser Beam Spot Welds, Welding Journal, Volume 89, No. 4, April Knorovsky, G.A., J. Norris, M.J. Perricone, Shear Testing of Laser Spot Welds, Poster presented at the 26th Annual International Congress on Applications of Lasers and Electro Optics (ICALEO), Orlando, FL, October Susan, D.F., C.V. Robino, J.R. Michael, B. McKenzie, M.J. Perricone, Diffusion and Phase Transformation During Glass to Metal Joining of Austenitic Stainless Steels, Presented at the 19th Annual Rio Grande Symposium on Advanced Materials, Albuquerque, NM, October Perricone, M. J., C.V. Robino, J.R. Michael, M. Reece, P.S. Duran, D.O. MacCallum, Determining the Critical Cooling Rate for the Massive Transformation from Ferrite to Austenite in Laser Welded Mo Bearing Stainless Steels, Presented at the Materials Science and Technology Conference, Detroit, MI, September Susan, D.F., M.J. Perricone, C.V. Robino, J.R. Michael, B.B. McKenzie, M. Rodriguez, Alloy Depletion and Martensite Formation During Glass to Metal Joining of Austenitic Stainless Steels, Presented to the Materials Science and Technology Conference, Detroit, MI, September Brewer, L. N., B.L. Boyce, M.J. Perricone, Electron Back Scattered Diffraction Characterization of Microstructures in Dynamically Deformed Pb Sn Solder, Presented at the Microscopy & Microanalysis Conference, Fort Lauderdale, FL, August Norris, J., M.J. Perricone, R.A. Roach, K. Faraone, C. Ellison, Evaluation of Weld Porosity in Laser Beam Seam Welds: Optimizing Continuous Wave and Square Wave Modulated Processes, Presented at the 26th Annual International Congress on Applications of Lasers and Electro Optics (ICALEO), Orlando, FL, November Perricone, M.J., T.D. Anderson, J.R. Michael, C.V. Robino, J.N. DuPont, Eutectoid Formation of Sigma during Single Pass Arc Welds in Mo Bearing Stainless Steels, Metallurgical and Materials Transactions A, Vol. 38A, No. 9, pp , Anderson, T. D., M.J. Perricone, J.N. DuPont, A.R. Marde, The Influence of Molybdenum on Stainless Steel Weld Microstructures, Welding Journal, Vol. 86, No. 9, pp. 281s 292s, Anderson, T. D., J.N. DuPont, M.J. Perricone, A.R. Marder, Phase Transformations and Microstructural Evolution of Mo Bearing Stainless Steels, Metallurgical and Materials Transactions A, Vol. 38A, No. 1, pp , Perricone, M.J., T.D. Anderson, C.V. Robino, J.R. Michael, J.N. DuPont, Predicting Sigma Formation in Mo Bearing Stainless Steels, Presented to the AWS Conference and Exposition, Atlanta, GA, October

4 Curriculum Vitae November, Perricone, M. J., C.V. Robino, M. Reece, P.S. Duran, Controlling Massive Transformations in Laser Welded Stainless Steels, AWS Conference and Exposition, Atlanta, GA, October Anderson, T.D., M.J. Perricone, J.N. DuPont. Joining of Superaustenitic Stainless Steels A New Approach, Presented at the Materials Science and Technology Conference, Cincinnati, OH, October Norris, J.T., M.J. Perricone, K.M. Faraone, C.M. Ellison, Porosity Characterization for Nd:YAG CW Laser Welds: Investigating the Effect of Square Wave Modulation, AWS Conference and Exposition, Atlanta, GA, October Perricone, M.J., T.D. Anderson, J.N. DuPont, C.V. Robino, On the Massive Transformation from Ferrite to Austenite in Laser Welded Mo Bearing Stainless Steels, Presented to the Materials Science and Technology Conference, Cincinnati, OH, October Perricone, M.J., T.D. Anderson, C.V. Robino, J.R. Michael, J.N. DuPont, Predicting Sigma Foration in Mo Bearing Stainless Steel Welds, Rio Grande Symposium on Advanced Materials, Albuquerque, NM, October Perricone, M.J., M.J. Martine, J.T. Norris, C.V. Robino, R.A. Roach, Modeling Fluid Dynamics in Stainless Steel Laser Weld Fusion Zones to Predict Weld Penetration and Porosity Formation, Poster presented to Gordon Research Conference on Physical Metallurgy, Plymouth, NH, July Perricone, M.J., J.N. DuPont, Effect of Composition on the Solidification Behavior of Several Ni Cr Mo and Fe Ni Cr Mo Alloys, Metallurgical and Materials Transactions A, Vol. 37A, No. 4, pp , Anderson, T. D., M. J. Perricone, J. N. DuPont, Development of Filler Metals for Super Austenitic Stainless Steels, 7 th International Conference on Trends in Welding Research, 2005 ASM Trends in Welding Research Conference, Pine Mountain, GA, May Anderson, T.D., M.J. Perricone, J.N. DuPont, Alloy Development of an Fe Based Filler Metal for Welding Superaustenitic Stainless Steel Advanced Double Hull Combatants, Presented at the AWS Conference and Exposition, Dallas, TX, April M.J. Perricone, Advanced Milling Technology Helps Identify Phase Transformations, Welding Journal, Vol. 84, No.10, pp , Perricone, M.J., Massive Transformation Structures, Metallography and Microstructures, ASM Handbook: Vol. 9, pp , Perricone, M.J., Bainitic Structures, Metallography and Microstructures, ASM Handbook: Vol. 9, pp , Perricone, M.J., M. Qian, J.N. DuPont, The Effect of Laser Welding Parameters on Pitting Corrosion Behavior of AL 6XN Superaustenitic Stainless Steel, AWS Conference and Exposition, Detroit, MI, April 2003.

5 Curriculum Vitae November, Perricone, M.J., J.N. DuPont, Weld Solidification Behavior of Super austenitic Stainless Steel and Ni Base Alloys for Marine Environment Applications, AWS Conference and Exposition, Detroit, MI, April Perricone, M.J., J.N. DuPont, M.J. Cieslak. Solidification of HASTELLOY Alloys: An Alternative Interpretation, Metallurgical and Materials Transactions A, Vol. 34A, No. 5, , Perricone, M.J., J.N. DuPont, Weld Solidification Behavior of Super austenitic Stainless Steel, International Conference on Joining of Advanced and Specialty Materials V, ASM Materials Solutions Conference and Exposition, Columbus, OH, October Perricone, M.J., J.N. DuPont, Weld Solidification Behavior of Super austenitic Stainless Steel and Ni Based Alloys, Presented at the University Welding Research Conference, Columbus, OH, August Perricone, M.J., J.N. DuPont, Laser Welding of Super austenitic Stainless Steel, In 6th International Conference on Trends in Welding Research, ASM Trends in Welding Research Conference, Pine Mountain, GA, April Perricone, M.J., Solidification of HASTELLOY Alloys: An Alternative Interpretation, Poster presented at the AWS Conference and Exposition, Honorable Mention, Chicago, IL., March Perricone, M.J., J.N. DuPont, Laser Welding of Super austenitic Stainless Steel for Advance Double Hull Combatants, AWS Conference and Exposition, Chicago, IL, March Perricone, M.J., J.N. DuPont, Laser Welding of Ni Mo Alloys, Presented at the ASM Materials Solutions Conference and Exposition, Indianapolis, IN, November Perricone, M.J., S.W. Banovic, J.N. DuPont, A.R. Marder, Solidification and Weldability of Super austenitic Stainless Steels, AWS Conference and Exposition, Cleveland, OH, May 2001.