Dr. Abdul Wadood. Current Position. March 26, Continue

Transcription

1 Dr. Abdul Wadood Current Position March 26, Continue Assistant Professor, Department of Materials Science and Engineering, Institute of Space Technology (IST) Near CDA Toll Plaza Islamabad Pakistan. /Phone Number Abdul.wadood@ist.edu.pk, wadood91@gmail.com Phone: (office), (mobile) Post PhD Experience Current Position Teaching Experience Inspection and Testing of Materials Materials Selection and Usage Advanced Materials Characterization Techniques Managerial Experience Coordinator, MS/PhD Program, Department of Materials Science and Engineering, IST Pakistan. Faculty Advisor, Material Advantage Student Chapter, IST Pakistan Member Review Committee, Fourth International Conference on Aerospace Science and Engineering (ICASE2014) IST Pakistan. 1

2 Reviewer, Journal of Alloys and Compounds (Elsevier Publisher). Past Post PhD Experience Postdoctoral Researcher High temperature Materials Unit, National Institute for Materials Science (NIMS) Tsukuba, April 1, March 31, 2014 Japan. Pre-PhD Experience Research Assistant (RA) Hosoda-Inamura group, Precision and Intelligence Lab, Tokyo Institute of Technology, Yokohama, April 1, 2009-March 31, 2012, Japan. Materials Engineer Faculty of Materials Science and Engineering (FMSE), Ghulam Ishaq Khan Institute (GIKI), Kkhyber-Pakhtoon Khawa (KPK), Pakistan July, 2000 August, Working in the corrosion and protection lab, heat-treatment lab, surface engineering lab, mechanical testing lab. Graduate Assistant (GA) Faculty of Materials Science and Engineering (FMSE), Ghulam Ishaq Khan Institute (GIKI), Kkhyber-Pakhtoon Khawa (KPK), Pakistan September, September, Awards and Honors Tejima Research Award on February 18, 2014 for scientific achievements, Tokyo Institute of Technology (TITECH) Japan. Winner Japan government (MEXT) scholarship for PhD Studies from Japan, Best oral presentation award, International Symposium on Advanced Materials (ISAM-2011), September 30,

3 Selected for president program for the care of highly qualified Overseas Pakistani s Program for ISAM2013 conference and universities lectures, Islamabad Pakistan (Sep.23- Oct. 4, 2013). Academic Record Doctor of Engineering in Innovative and Engineered Materials Tokyo Institute of Technology, March 26, 2012, Japan. Master of Science in Materials Engineering CGPA = 3.81/4.0, 1 st Position in the Faculty of Materials Science and Engineering, GIK Institute of Engineering, Sciences and Technology, 2008, Pakistan. Bachelor of Science in Metallurgical Engineering and Materials Science University of Engineering and Technology (UET) Lahore, 2000, Pakistan. PhD Thesis Title Study on Mechanical, Shape Memory and Pseudoelastic Properties of Ti-Cr-Sn and Ti-Cr-Ag Alloys with Various Ageing Treatments. MS Thesis Title In-Vitro Biocompatibility and Corrosion Behavior of NiTi Based Shape Memory Alloys. Research Grant Abdul Wadood (PI), Abdul Mateen (Co-PI), Development and Characterization of NiTi based shape memory alloys, Approval of 0.5 million Startup Research Grant Project from HEC Pakistan on June 26, International Journal Papers with Impact Factor Publications List [1] A. Wadood, Y. Yamabe-Mitarai: Silver- and Zirconium-Added Ternary and Quaternary TiAu Based High Temperature Shape Memory Alloys, Journal of Alloys and Compounds 646 (2015)

4 [2] A. Wadood, Y. Yamabe-Mitarai: Recent Research and Development Related to Near Equiatomic TiPt Alloys for High Temperature Applications, Platinum Metals Review 58 (2014) [3] A. Wadood, Y. Yamabe-Mitarai, TiPt Co and TiPt Ru high temperature shape memory alloys, Materials Science and Engineering A 601 (2014) [4] A. Wadood, H. Hosoda, Y. Yamabe-Mitarai, Phase transformation, oxidation and shape memory properties of Ti 50Au 10Zr alloy for high temperature applications, Journal of Alloys and Compounds 595 (2014) [5] A. Wadood, Inamura, H. Hosoda, S. Miyazaki: Effect of α Phase Precipitation on Martensitic Phase Transformation and Mechanical Properties of Ti-6Cr-3Sn Alloy, Journal of Alloys and Compounds 5775 (2013) S427-S430. [6] A. Wadood, Inamura, Y. Yamabe-Mitarai, H. Hosoda: Strengthening of Ti-6Cr-3Sn Alloy through Grain Refinement, Phase Precipitation and Resulting Effects on Shape Memory Properties, Materials Science & Engineering A559 (2013) [7] A.Wadood, M. Takahashi, S. Takahashi, H. Hosoda, Y. Yamabe-Mitarai, High Temperature Mechanical and Shape Memory Properties of TiPt-Zr and TiPt-Ru Alloys, Materials Science & Engineering A564 (2013) [8] A. Wadood, T. Inamura, Y. Yamabe-Mitarai, H. Hosoda: Comparison of Bond Order, Metal d Orbital Energy Level, Mechanical and Shape Memory Properties of Ti-Cr-Sn and Ti-Ag-Sn alloys, Materials Transactions 54 (2013) [9] A. Wadood, T. Inamura, Y. Yamabe-Mitarai, H. Hosoda: Comparison of Bond Order, Metal d Orbital Energy Level, Mechanical and Shape Memory Properties of Ti-Cr-Sn and Ti-Ag-Sn alloys, Materials Transactions 54 (2013) [10] A. Wadood, Inamura, Y. Yamabe-Mitarai, H. Hosoda: Effect of Uniform Distribution of α Phase on Mechanical, Shape Memory and Pseudoelastic Properties of Ti-6Cr-3Sn Alloy, Materials Science and Engineering A 555 (2012) [11] A. Wadood, T. Inamura, H.Hosoda, S. Miyazaki: Comparative Study of Ti-xCr-3Sn Alloys for Biomedical Applications, Materials Transactions 52 (2011)

5 [12] A. Wadood, T. Inamura, H. Hosoda, S.Miyazaki: Ageing Behavior of Ti-6Cr-3Sn β Titanium Alloy, Materials Science and Engineering A 530 (2011) International Conference Papers Publications List [1] A. Wadood, H. Hosoda, Y. Yamabe-Mitarai, TiAu based shape memory alloys for high temperature applications, IOP Conf. Series: Materials Science and Engineering 60 (2014) [2] A. Wadood, Y. Yamabe-Mitarai, TiAu and TiPt High Temperature Shape Memory Alloys, Proceedings of th International Bhurban Conference on Applied Sciences & Technology (IBCAST) Islamabad, Pakistan, 14th 18th January, 2014 DOI: /IBCAST [3] Y. Yamabe-Mitarai, A. Wadood, R. Arockiakumar, T. Hara, M. Takahashi, S. Takahashi, H. Hosoda: High-temperature shape memory alloys based on Ti-Platinum Group Metals compounds, Materials Science Forum Vols (2014) pp [4] A. Wadood, M. Takahashi, S. Takahashi, H. Hosoda, Y. Yamabe-Mitarai: Improvement of Mechanical and Shape Memory Properties of Ti-50Pt High Temperature Shape Memory Alloys by Addition of Group IV Elements, TMS2013 Annual Meeting Supplemental Proceedings, San Antonio, Texas USA (2013), pp [5] A. Wadood, H. Hosoda, Y. Yamabe-Mitarai: TiAu Based Shape Memory Alloys for High Temperature Applications, International Symposium on Advanced Materials (ISAM2013), IOP Conf. Series: Materials Science and Engineering 60 (2014) [6] A. Wadood, T. Inamura, H. Hosoda, S. Miyazaki: Cold Workability, Mechanical, Pseudoelastic and Shape Memory Response of Silver Added Ti-5Cr Alloys, Advanced Materials Research 409 (2012) [7] A. Wadood, T. Inamura, H. Hosoda, S. Miyazaki: Effect of Ageing Treatment on Mechanical and Shape Memory Properties of Ti-5Cr-4Ag Alloy, Key Engineering Materials, (2012) [8] A. Wadood, T. Inamura, H. Hosoda, S. Miyazaki: Comparative study of Ti-6Cr-3Sn Biomedical Alloy in Solution-treated and 473K-Aged Conditions, Ti-2011 Proceedings, Vol. 3 pp

6 Patents Submitted 12-MS-116 特願 Conference Presentations [1] Mattech2015, GIK Institute, May [2] 3 rd Asean Pakistan Conference on Materials Science (APCOMS-3), School of Chemical and Materials Engineering, NUST, Pakistan, November 25-27, [3] 2 Days Seminar on Synthesis and Characterization of Functional Materials, May 26-27, 2015 [4] ISAM 2013: International Symposium on Advanced Materials (ISAM 2013), Islamabad Pakistan, September 23-27, [5] TICMS2013: Tsukuba International Conference on Materials Science (TICMS2013), August 28-September 6, [6] TMS2013: Convention Center, San Antonio, Texas USA, March 3-7, [7] IBCAST2013: 10th International Bhurban Conference on Applied Sciences & Technology Islamabad Pakistan, January [8] Japan Institute of Metals (JIM), Fall Meeting 2013, Kanazawa University, Kanazawa, September 17-19, [9] Japan Institute of Metals (JIM), Spring Meeting, Tokyo University of Science, Kagurazaka-Campus, Tokyo, March 27-29, [10] NIMS2012: Structural Materials Science and Strategy for Sustainability Back to the Basics, June 4-6, 2012, Tsukuba International Congress Centre Tsukuba Japan. [11] International Scientific Spring 2012, National Center for Physics (NCP) Islamabad, March 5-9,

7 [12] Energy Materials Conference 2012: Sir Denis Rooke Conference Centre, Loughborough University, UK, October 18-19, [13] Japan Institute of Metals (JIM), Fall Meeting, EHIME University and Matsuyama University, September 17-19, [14] ISAM 2011: International Symposium on Advanced Materials (ISAM 2011), Islamabad Pakistan, September 26-30, [15] ICOMAT 2011: International Conference on Martensitic Phase Transformation, Osaka Japan, September 4-9, [16] Thermec 2011: International Conference on Processing and Manufacturing of Advanced Materials, Quebec Canada, August 1-5, [17] Titanium 2011: The 12th World Conference on Titanium, Beijing China, June 19-24, [18] Japan Institute of Metals (JIM), Fall Meeting, Okinawa, November 7-9, [19] Japan Institute of Metals (JIM), Spring Meeting, Tokyo Japan, March 25-27, [20] Tokyo Tech Tsinghua University (China) Joint Symposium: Fujiyoshida, Japan, November 11-13, [21] Japan Institute of Metals (JIM), Fall Meeting, Hokkaido Japan, September 25-27, [22] Japan Institute of Metals (JIM), Spring Meeting, Tsukuba Japan, March 28-30, [23] First All Pakistan Conference on Materials Technology (MatTech. 08), GIK Institute of Engineering, Sciences and Technology, Pakistan. [24] Second National Seminar on Welding Science and Technology, March 14-17, 2005 Pakistan. [25]3 rd International Chemistry Conference, December 28-31, 2002, Karachi Pakistan. Lectures/Seminars 7

8 Invited Lecture, School of Chemical and Materials Engineering (SCME), National University of Science and Technology (NUST) Pakistan, Sep. 27, Lectures/Seminars under President Programme for care of Highly Qualified Overseas Pakistanis Programme (PPQP) (a) Department of Materials Science and Engineering, IST Islamabad; September 30, 2013 (b) Faculty of Materials Science and Engineering (FMSE) GIK Institute, October 1, 2013 (c) School of Chemical and Materials Engineering (SCME) NUST Islamabad, October 2, 2013 (d) Department of Physics, COMSATS Islamabad, October 3, 2013 Conference/Workshops Participation [1] Symposium on Nanomaterial Research, June 15-17, 2015 Pakistan Institute of Nuclear Science and Technology (PINSTECH), Islamabad Pakistan [2] 2-Days workshop on Curriculum Designing, November 10-11, 2014, Faculty development academy, COMSATS Institute of Information Technology, Islamabad. [3] Conference on Frontiers of Nanoscience and Nanotechnology, June 3-5, 2014, Pakistan Institute of Nuclear Science and Technology (PINSTECH), Islamabad Pakistan. Courses Studied During PhD Program: Advanced Course on Nano Materials I, Topics in Innovative Materials Science I, Seminar V on Advanced Materials, Advanced Course on Nano Materials II, Crystallography for Microstructural Characterization, Seminar VI on Advanced Materials, Alloy Phase Diagrams, Seminar VII on Advanced Materials, Seminar VIII on Advanced Materials, Seminar IX on Advanced Materials, Seminar X on Advanced Materials. Courses Studied During MS Program: Thermodynamic of Materials, Corrosion Monitoring and Protection, Nano Technology, Advanced Engineering and Nano Structural Materials, Solar Energy and its Applications, Semiconductor Technology and Devices, Phase Transformation in Materials Reviewer 8

9 Materials Science and Engineering A Platinum Metals Review Journal of Alloys and Compounds Materials Letters References Prof. Dr. Ibrahim Qazi: Head of Department (HOD), Department of Materials Science and Engineering, Institute of Space Technology (IST) Pakistan. ibrahim@ist.edu.pk Prof. Dr. Hideki Hosoda (PhD Supervisor): Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259-R2-27, Midori-ku, Yokohama , Japan hosoda.h.aa@m.titech.ac.jp Dr. Yoko Yamabe-Mitarai: Group Leader, High Temperature Materials Unit, National Institute for Materials Science, Sengen, Tsukuba, Ibaraki , Japan Mitarai.yoko@nims.go.jp 9