E-glass direct roving

Transcription

1 Aut h o r i z e d D i s t r i b u t i o n P a r t n e r Product survey E-glass direct roving Direct roving Type µm Nominal fineness Working Impregnation with Roving skein Weaving Winding Pultrusion VE, EP, UP *** ** VE, EP, UP *** *** VE, EP, UP *** *** *** VE, EP, UP *** *** *** Hohe Abriebbeständigkeit High wear resistance und and damit due to wenig this low Glasfaserflusen glass fiber fluff Schlingenfreier Good saturating und spannungsgleicher and wetting characteristics Rovingstrang High mechanical strength especially with epoxy resins Gute Tränk- und Benetzungseigenschaften order by phone: survey - E-glass direct roving by fiber@muehlmeier.de

2 Aut h o r i z ed D ist r ib u t i o n P a rt n e r Product information StarRov E-glass direct roving 076 Description: The direct roving 076 is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for weaving process or the production of cores, especially multiaxial fabrics. The direct roving 076 has a good impregnation with polyester-, epoxy- and vinylester resins, low wear and guarantees high mechanical strength of the final product. The product is made by E-glass, marked as aluminum-borosilicate glass according to DIN and ASTM D 578. High wear resistance and due to this low glass fiber fluff Good saturating and wetting characteristics High mechanical strength especially with epoxy resins Technical characteristics (target values): Unit PR PR PR PR PR PR PR Filament diameter µm Nominal fineness roving skein tex Size base silane silane silane silane silane silane silane Bobbin weight kg 16 +/ / / / / / / order by phone: E-glass direct roving 076 by fiber@muehlmeier.de

3 Aut h o r i z ed D ist r ib u t i o n P a rt n e r Measurable parameters Method 076 PR PR PR PR Glowing loss ISO Moisture content ISO linear density (titer) ISO Tensile strength ISO no info Packaging and labeling: The direct roving is produced in the shape of a cylindrical bobbin with inside unwinding. The bobbins are single packed in foil and delivered on pallets. Bobbin height: Bobbin packaging: Bobbins per pallets: Pallet: 50 mm PE-foil 48 pieces ca. 90 kg net (size: 10 x 88 cm or 16 x 95 cm) Each packing unit is marked with the following information: Producer, product name, batch, gross- / net weight, product code, production date, packing code Transport and storage conditions: The product is transported in closed and moisture protected vehicles The supply is effected with quality certificate. These products should be stored in original packaging in dry, roofed and dust-free warehouses. The recommended temperature is between 10 C and 30 C at a relative air moisture between 50% and 75%. Before working the products should be conditioned in original packing in the working area for at least 4 hours. The pallets may not be stacked if there are no other instructions on the packing order by phone: E-glass direct roving 076 by fiber@muehlmeier.de

4 Aut h o r iz ed D is t ri b ut io n Pa r t n e r Product information StarRov E-glass direct roving Description: The direct roving is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for weaving process or the production of cores, especially multiaxial fabrics. The direct roving has a good impregnation with polyester-, epoxy- and vinylester resins, low wear and guarantees high mechanical strength of the final product. The product is made by E-glass, marked as aluminium-borosilicate glass according to DIN and ASTM D 578. High wear resistance and due to this low glass fiber fluff Good saturating and wetting characteristics High mechanical strength especially with epoxy resins Technical characteristics (target values): Unit PR PR Filament diameter µm Nominal fineness roving skein tex Size base silane silane silane silane Bobbin weight kg 18 +/ / / /-1 Measurable parameters order by phone: E-glass direct roving by fiber@muehlmeier.de

5 Aut h o r iz ed D is t ri b ut io n Pa r t n e r Method PR PR Glowing loss ISO Moisture content ISO linear density (titer) ISO Tensile strength ISO no info. Packaging and labeling: The direct roving is produced in the shape of a cylindrical bobbin with inside unwinding. The bobbins are single packed in foil and delivered on pallets. Bobbin height: Inside/outside diameter: Bobbins per pallets: Pallet: 55 mm 160 mm/300 mm 48 pieces ca. 90 kg net (size: 10 x 88 cm or 16 x 95 cm) Each packing unit is marked with the following information: Producer, product name, batch, gross- / net weight, product code, production date, packing code Transport and storage conditions: The product is transported in closed and moisture protected vehicles The supply is effected with quality certificate. These products should be stored in original packaging in dry, roofed and dust-free warehouses. The recommended temperature is between 10 C and 30 C at a relative air moisture between 50% and 75%. Before working the products should be conditioned in original packing in the working area for at least 4 hours. The pallets may not be stacked if there are no other instructions on the packing order by phone: E-glass direct roving by fiber@muehlmeier.de

6 Aut h o r iz ed D is t rib u t io n Pa r t ne r Product information StarRov E-glass direct roving Description: The direct roving is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for weaving process or winding and pultrusion. The direct roving has a good impregnation with polyester- epoxy- and vinylester resins, low wear and guarantees high mechanical strength of the final product, especially with epoxy resins. The product is made by E-glass, marked as aluminium-borosilicate glass according to DIN and ASTM D 578. High wear resistance and due to this low glass fiber fluff Good saturating and wetting characteristics Technical characteristics (target values): Unit PR PR Filament Diameter µm Nominal fineness roving skein tex Size base silane silane silane silane silane silane Bobbin weight kg 0 +/-1 0 +/-1 0 +/-1 0 +/-1 0 +/ /-1 Measurable parameters order by phone: E-glass direct roving by fiber@muehlmeier.de

7 Aut h o r iz ed D is t rib u t io n Pa r t ne r Method PR PR Glowing loss ISO Moisture content ISO Linear density (titer) ISO Tensile strength ISO no info no info no info Packaging and labeling: The direct roving is produced in the shape of a cylindrical bobbin with inside unwinding. The bobbins are single packed in foil and delivered on pallets. Bobbin height: Inside/outside diameter: Bobbins per pallets: Pallet: 55 mm 160 mm/300 mm 48 pieces ca. 90 kg net (size: 10 x 88 cm or 16 x 95 cm) Each packing unit is marked with the following information: Producer, product name, batch, gross- / net weight, product code, production date, packing code Transport and storage conditions: The product is transported in closed and moisture protected vehicles The supply is effected with quality certificate. These products should be stored in original packaging in dry, roofed and dust-free warehouses. The recommended temperature is between 10 C and 30 C at a relative air moisture between 50% and 75%. Before working the products should be conditioned in original packing in the working area for at least 4 hours. The pallets may not be stacked if there are no other instructions on the packing order by phone: E-glass direct roving by fiber@muehlmeier.de

8 Aut h o r iz ed D is t rib u t io n Pa r t ne r Product information StarRov E-glass direct roving 908 Description: The direct roving 908 is drawn directly from the glass melting and wound to a roving bobbin without turn. It is characterized by a soft silane size that is especially recommended for weaving process or winding and pultrusion. The direct roving 908 has a good impregnation with polyester- epoxy- and vinylester resins, low wear and guarantees high mechanical strength of the final product, especially with epoxy resins. The product is made by E-glass, marked as aluminium-borosilicate glass according to DIN and ASTM D 578. High wear resistance and due to this low glass fiber fluff Good saturating and wetting characteristics Technical characteristics (target values): Unit PR Filament diameter µm Nominal fineness roving skein tex Size base silane silane silane silane Bobbin weight kg 0 +/-1 0 +/-1 0 +/-1 19+/-1 Measurable parameters order by phone: E-glass direct roving 908 by fiber@muehlmeier.de

9 Aut h o r iz ed D is t rib u t io n Pa r t ne r Method PR Glowing loss ISO Moisture content ISO Linear density (titer) ISO Tensile strength ISO no info no info Packaging and labeling: The direct roving is produced in the shape of a cylindrical bobbin with inside unwinding. The bobbins are single packed in foil and delivered on pallets. Bobbin height: Inside/outside diameter: Bobbins per pallets: Pallet: 55 mm 160 mm/300 mm 48 pieces ca. 90 kg net (size: 10 x 88 cm or 16 x 95 cm) Each packing unit is marked with the following information: Producer, product name, batch, gross- / net weight, product code, production date, packing code Transport and storage conditions: The product is transported in closed and moisture protected vehicles The supply is effected with quality certificate. These products should be stored in original packaging in dry, roofed and dust-free warehouses. The recommended temperature is between 10 C and 30 C at a relative air moisture between 50% and 75%. Before working the products should be conditioned in original packing in the working area for at least 4 hours. The pallets may not be stacked if there are no other instructions on the packing order by phone: E-glass direct roving 908 by fiber@muehlmeier.de