AC Rev D Nadcap Audit Criteria for Inspection and Test Quality System (to be used on audits BEFORE 1-JAN-2011)

Transcription

1

2

3

4 Supplier Details eauditnet 1 of 2 3/2/ :13 PM Supplier Details Search Results All Certs Supplier name: Stabile Plating Active Suppliers: True Stabile Plating, 1150 E Edna Pl, Covina, California , United States Phone: , Fax: Show all scopes AQS (Aerospace Quality Systems) Issue Date Expiry Date 02-Jul Jul-12 Hide scopes AC Rev D Nadcap Audit Criteria for Inspection and Test Quality System (to be used on audits BEFORE 1-JAN-2011) CP (Chemical Processing) Issue Date 29-Jan-10 Expiry Date 31-Oct-11 Hide scopes Supplier has merit for above audit AC7108 Rev D - Nadcap Audit Criteria for Chemical Processing Conversion/Phosphate Coatings MIL-DTL-5541 Surface Treatment/Passivation QQ-P-35 TESTING PERFORMED INTERNALLY IN SUPPORT OF CHEMICAL PROCESSING IN THE SCOPE OF THE AUDIT. (DO NOT CHECK TESTS THAT ARE OUTSOURCED.) B13 Coating Weight Testing B5 Corrosion/Salt Spray Testing B10 Adhesion Tape Testing B6 Water Immersion/High Humidity Testing B16 Thickness Verification of Magnetic, Eddy Current and XRF Machines Solution Analysis Surface Treatment/Passivation AMS-2700 Etch (AC7108/2 MUST ALSO BE SELECTED) Conversion/Phosphate Coatings MIL-C-5541 Anodizing AMS-A-8625 Surface Treatment/Passivation AMS-QQ-P-35 Anodizing MIL-A-8625 AC7108/2 Rev A - Nadcap Audit Criteria for Etch Processes (Blue Etch Anodize, Local, Macrostructure, Nital, Pre-Penetrant, Temper) Pre-Penetrant Etch NDT (NonDestructive Testing) Issue Date 21-Dec-10 Expiry Date 31-Jul-12 Hide scopes Supplier has merit for above audit AC7114S/1 Rev E - Supplemental Audit Criteria for Nadcap Audit Criteria for NonDestructive Testing Facility Penetrant Survey S-U11 The Boeing Company AC7114S Rev E - Supplemental Audit Criteria for Nadcap NonDestructive (NDT) Suppliers Accreditation Program Audit

5 Supplier Details eauditnet 2 of 2 3/2/ :13 PM Criteria S-U11 The Boeing Company AC7114/1 Rev D - Nadcap Audit Criteria for NonDestructive Testing Facility Penetrant Survey AC7114 Rev D - Nadcap NonDestructive Testing (NDT) Suppliers Accreditation Program Audit Criteria Note: The specifications and processes shown were identified by the processor as controlled to the Nadcap Audit Criteria and available for auditing, however, the Nadcap audit uses a sampling process and cannot confirm that the requirements of any given specification are fully met by the supplier

6 STABILE PLATING CO., INC E Edna Place, Covina, CA (626) Fax: (626) The following information may be used for our customer vendor surveys. Company Name Business Address Stabile Plating Co Inc 1150 E Edna Place Covina, Ca Phone Number Fax Number Web Address Contact Information Eric Crest President eric@stabileplating.com Steve Crest Quality Manager steve@stabileplating.com Stephanie Esqueda Office Manager Business Type Corporation Years in Business 50 State of Incorporation California Ownership Wholly owned Parent Company None Services Provided Processes Provided Major Customers Metal Finishing See attached brochure See attached brochure Organization Total Employees 20 Production 14 Quality 4 Engineering 1 Other 1 Quality System Accreditations AS9100, AC7004 (Nadcap) Nadcap (certifications follow) Steve Crest, QM 11/19/2008

7

8 Hours Monday 6:00-5:00 Tuesday 6:00-5:00 Wednesday 6:00-5:00 Thursday 6:00-5:00 Friday 8:00-12:00 Saturday Sunday Closed Closed Approvals Stabile Plating Co. Inc E. Edna Place Covina CA (626) (voice) (626) (fax) Companies no longer provide us letters of approval. Instead, approved vendor information is made availble on their website or through their purchasing department. Directions Thomas Guide LA County, page 599, E4

9 Process Description Specifications Colors Minimum Anodize Titanuium Anodize Chemical Conversion Coating (Chem Film) Passivation Anodic coating improves the surface corrosion protection of aluminum under severe service conditions. This coating also serves as a base for paint. Anodic coatings provide better corrosion protection than chromate chemical conversion coatings. Hard anodic coatings improve wear and abrasion resistance of aluminum alloys. Dyeing and/or sealing are not recommended unless corrosion resistance is not rquired. These steps reduce wear resistance of hard coat. Mil-A-8625; Type 2 (Sulfuric) Class 1 - Undyed Class 2 - Dyed Mil-A-8625; Type 3 (Hard Sulfuric) Class 1 - Undyed Class 2 - Dyed MIL-S-5002 MIL-STD 171 AMS 2471, S472 ASTM 2468, 2469 Clear Black Red Green Gold Blue Brown Grey Yellow Violet Turquoise Olive Drab Decorative coloring and color-coding of titanium metals. Many shades of gold, blue, red, and green. The Class 1A coating provides corrosion protection for aluminum and aluminum alloys when left unpainted. The coating also improves adhesion of paint finish systems. The Class 3 coating provides corrosion protection for electrical and electronic applications where lower electrical resistance contacts are required. The Class 3 coating is thinner than the 1A coating, and therefore more susceptible to corrosion. Passivation improves the corrosion resistance of parts made from 200, 300, and 400 series and precipitation-hardened corrosion-resistant steels by removing soils and free iron. Passivation does not remove heat treat scale. It is usually removed by glass bead blasting. It can also be removed chemically when dimensional loss is not important. 440C material is not normally passivated. Cleaning by mechanical methods is recommended. MIL-DTL-5541; Type 1, Class 1A and Class 3 MIL-C-5541 MIL-STD-171 AMS 2473, 2474 AMS 2700 QQ-P-35 ASTM A967 ASTM A380 MIL-S-5002 MIL-STD 171 Type 2, Dyed or Undyed $45 Type 3, Dyed or Undyed $65 Sodium Dichromate Seal $30 $50 Gold $45 Passivation $45 Optional Lab Test $25 Optional Lab Report $10 Penetrant Inspection Penetrant inspection detects discontinuities open to the surface, such a cracks, cold shuts, laps, and porosity, which may be harmful to the part or basic material. Mil-Std 6866 ASTM E1417 $60 Type I, Methods A and C Sensitivity Levels 1, 2, and 3 Laser Engraving Laser engraving provides precsion marking on aluminum, steels, and plastic. Engraving is commonly used for part number identification and complex artwork on faceplates. Engraving on aluminum removes the anodize color, leaving white images on a colored background. Engraving on steels provides black characters. $50 Selective Masking Artwork can be provided in a variety of formats. Bitmapped images must be at least 600 dpi. Artwork can also be provided by Stabile for an additional charge. A fixture must be made to hold the parts, and can be provided by Stabile. Masking protects selected areas from plating or surface treatments. $35 Other Services... Caustic etch, bifluoride etch, glass bead blast February 1, 2010

10 D Page 1 of 1 5/23/2011 Doing Business with Boeing D Doing Business with Boeing Home Close Approved Process Sources D Approved Process Sources D Home Nadcap Accreditation Notes & Exceptions Revision Summary User Instructions / Processor Requirements Approved Processors Geographic APL Process Code Listing Specification Index Listing Limitation Index Division Tables Boeing Contacts Geographic Map Authorized Manufacturers of Aircraft Bearings Authorized Manufacturers of Designated Fasteners Document D Processor: STABILE PLATING D Approval Report updated May 23, 2011 Revision GW - effective May 3, 2011 Document D Processor: STABILE PLATING Click on the Processor code number for a complete list of approvals P93163 STABILE PLATING 1150 E EDNA PLACE COVINA, CA USA Area: 2IC Contact Name: Steve Crest, Quality Manager Phone: (626) Fax: (626) Copyright 2010 The Boeing Company - All rights reserved Security Agreement

11 D Page 1 of 2 5/23/2011 Doing Business with Boeing D Doing Business with Boeing H C Approved Process Sources D Approved Process Sources D Home Nadcap Accreditation Notes & Exceptions Revision Summary User Instructions / Processor Requirements Approved Processors Geographic APL Process Code Listing Specification Index Listing Limitation Index Division Tables Boeing Contacts Geographic Map Authorized Manufacturers of Aircraft Bearings Authorized Manufacturers of Designated Fasteners Document D Processes for P93163 D Approval Report updated May 23, 2011 Revision GW - effective May 3, 2011 Detail Information for Processor Code number: P93163 Supplier Name: STABILE PLATING Address: 1150 E EDNA PLACE, City/town: COVINA Province/state: CA Country: USA Area: 2IC Contact Name: Steve Crest Title: Quality Manager Phone: (626) Fax: (626) * An acronym in the "Nadcap Commodity" column only indicates that Nadcap accreditation may be required for this Process Code. It does not provide any indication of this company's actual Nadcap accreditation status. Process Code *Nadcap Limitation Commodity Codes Doc Notes 001 AQS None None 301 CP None Excluding Type IIB anodize. 301A CP None None 302 CP None None Nomenclature Specification Number Boeing approved QMS as defined in Processor Rqmts Sec Sulfuric Acid Anodize Type II (Approval Not Required for International Space Station (ISS) Houston Only) Sulfuric Acid Anodizing Type II Hard Anodize Type III Quality System MIL-A-8625 AMS-A-8625 MIL-A-8625

12 D Page 2 of 2 5/23/ A CP None None 320 CP None None 320B CP None None 410 NDT None None 410A NDT None None 411 NDT None None 412 NDT None None 809 CP None None P320 CP None None Hard Anodic Coatings Type III Chemical Conversion Coating on Aluminum (Immersion App only) (Approval Not Required for International Space Station (ISS) Houston Only) Chemical Conversion Coatings on Aluminum and Aluminum Alloys (Immersion Application Only) Penetrant Inspection Liquid Penetrant Inspection Penetrant Inspection Penetrant Inspection Process Solution Control Application of Chemical Films to Aluminum Alloys (Immersion Application Only) AMS-A-8625 MIL-C-5541 MIL-DTL BAC 5423 BSS 7039 ASTM-E MIL-STD Chem. Testing AA Copyright 2010 The Boeing Company - All rights reserved Security Agreement

13 Source Approval List Page 1 of 1 5/12/2011 Back to Supplier Portal Welcome ERIC, CREST HOME CONTROLLED SPECS/APPROVAL CODES APPROVAL REQUESTS CHANGE REQUESTS APSL SEARCH HELP CLOSE Contact SSC Source Approval Search Results << Back To Previous Page Must Read Instructions Source Approval List For Source Name STABILE PLATING, Current Approval Date - Total Records Returned = 4 Click on Hyperlink to get more information; Export this information by clicking on Excel icon; Print this information by clicking on Print Button. Selection checkboxes on left are available to select specifications to add to a Source. Go to bottom of screen to proceed with a request for a new supplier approval (RFA). Data Displayed at a time 200 Page: 1 of 1 Expiration date is calculated based on Honeywell Audit, Nadcap, SCA, and Export license expiration as applicable. If APSL Approval is expired, Supplier is not permitted to manufacture Honeywell product using the expired process after the expiration date nor ship product processed by an unapproved or expired special process source. Select Expiration. Date Specification Number Spec Description Export Restricted Type Grade/Other Category Part State/Province Restrictions/ OneSource Source Usage Number External Comments ID Name Class Scope Family Specific Region Approval 30-APR- 12 CP.ANDZ.H HARD N CHEMICAL PROCESSING STABILE CA S N AC7108-ANODIZING PLATING USA-WEST 21-APR-0 30-APR- 12 CP.ANDZ.S SULFURIC N CHEMICAL PROCESSING STABILE CA S N AC7108-ANODIZING PLATING USA-WEST 21-APR-0 30-APR- 12 CP.CLE.P PASSIVATION N CHEMICAL PROCESSING STABILE CA S N AC7108-PASSIVATION PLATING USA-WEST 21-APR-0 30-APR- 12 CP.CNV.A CONVERSION ING - ALUMINUM N AC7108-CONV/PHOS INGS CHEMICAL PROCESSING S N CA STABILE PLATING USA-WEST 21-APR-0 Add Selected Specification Details to the Source Notes : 1. The specification selection details will be lost if you go back to the Search Screen. 2. Specifications which are Obsolete,General and NO APP cannot be selected for adding to new source. Hence checkboxes are not provided against these records. Terms & Conditions Privacy Statement Honeywell International Inc. All Rights Reserved. Best viewed with Internet Explorer v6.0 or above.

14 SPEC CODE DETAIL PAGE Page 1 of 2 5/12/2011 Close Approval Codes:: Code Number Details Code Number Details Code Number : CP.CLE.P Specification Number : CP.CLE.P Description : PASSIVATION Revision : Spec Status : ACTIVE Audit Requirement : NADCAP Site Specific : N Part Number Specific : N Export Restricted : N Controlling Country : USA Comments : Code Details Type Class Grade/Other Category Family On Site Required SCA Required Code Detail Scope CHEMICAL PROCESSING Y Y AC7108- PASSIVATION Approved Sources Specification Number Details 31 results found, displaying 1 to 31 Specification Number Specification Description/Title Type Class Grade/Other FINISH SPECIFICATION - PASSIVATION OF CORROSION RESISTANT STEEL PASSIVATION OF CORROSION RESISTANT STEEL 1-TS-T-020 DECAPAGE ET PASSIVATION DES ACIERS INOXYDABLES AUSTENITIQUES AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 1 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 2 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 3 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 4 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 5 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 6 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 7 METHOD 1 AMS 2700 PASSIVATION OF CORROSION RESISTANT STEELS 8 METHOD 1 AMS-QQ-P-35 AMS-QQ-P-35 AMS-QQ-P-35 AMS-QQ-P-35 PASSIVATION TREATMENTS FOR CORROSION- RESISTANT STEEL PASSIVATION TREATMENTS FOR CORROSION- RESISTANT STEEL PASSIVATION TREATMENTS FOR CORROSION- RESISTANT STEEL PASSIVATION TREATMENTS FOR CORROSION- RESISTANT STEEL II VI VII VIII

15 SPEC CODE DETAIL PAGE Page 2 of 2 5/12/2011 AMS-QQ-P-35 PASSIVATION TREATMENTS FOR CORROSION- RESISTANT STEEL ASTM A380 CLEANING, DESCALING, & PASSIVATION OF STAINLESS STEEL ASTM A967 CHEM PASS TREATMENT STAINSTEEL BEPS C5041 C5041 C5094 PASSIVATION TREATMENTS, CORROSION RESISTANT STEEL SURFACE CLEANING AND PASSIVATION OF CORROSION- AND HEAT-RESISTANT ALLOYS SURFACE CLEANING AND PASSIVATION OF CORROSION- AND HEAT-RESISTANT ALLOYS Surface Cleaning Treatments For Corrosion- And Heat-Resistant Alloys - F-18 (Supsd by C5041) CLASS I CLASS II CLASS GPS CLEANING AND PASSIVATION 1 GPS CLEANING AND PASSIVATION M69510 PASSIVATION TREATMENT FOR STAINLESS STEEL NGPS 61 PASSIVATION OF CORROSIION RESISTING STEEL P6401 P6402 PS-1024 PS-1027 QQ-P-35 Passivation, Stainless Steel, Process for (300 and 400 Materials) [Supsd by QQ-P-35] Passivation, Process for (AM350 and AM355 Materials) (Supsd by QQ-P-35) PASSIVATION TREATMENT FOR CORROSION RESIS ST PASSIVATION TREATMENT OF CORROSION RESISTANT STEEL PASSIVATION TREATMENTS FOR CORROSION- RESISTANT STEEL Terms & Conditions Privacy Statement Honeywell International Inc. All Rights Reserved. Best viewed with Internet Explorer v6.0 or above.

16 SPEC CODE DETAIL PAGE Page 1 of 2 5/12/2011 Close Approval Codes:: Code Number Details Code Number Details Code Number : CP.ANDZ.S Specification Number : CP.ANDZ.S Description : SULFURIC Revision : Spec Status : ACTIVE Audit Requirement : NADCAP Site Specific : N Part Number Specific : N Export Restricted : N Controlling Country : USA Comments : Code Details Type Class Grade/Other Category Family On Site Required SCA Required Code Detail Scope Approved Sources CHEMICAL PROCESSING Y Y AC7108- ANODIZING Specification Number Details 17 results found, displaying 1 to 17 Specification Number Specification Description/Title Type Class Grade/Other FINISH SPECIFICATION- SULFURIC ON ALUMINUM FINISH SPECIFICATION- SULFURIC ON ALUMINUM SULFURIC ACID ANODIZING OF ALUMINUM 1-TS-Q-002 ANODISATION DES PIECES EN ALLIAGE D'ALUMINIUM OAS ANODIC FINISH FOR ALUMINUM ALLOYS AMS 2471 AMS 2472 AN-QQ-A-696 ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, UNDYED ING ANODIC TREATMENT OF ALUMINUM ALLOYS, SULFURIC ACID PROCESS, DYED ING ANODIC-FILMS; CORROSION-PROTECTIVE FOR ALUMINUM ALLOYS ALL EXCEPT CHROMIC DEF STAN SULPHURIC ACID ANODISING OF ALUMINIUM & ALUMINIUM ALLOYS FI-1153 SULFURIC ACID ANODIZING OF ALUMINUM ALLOYS M69527 MIL-A-8625 MIL-A-8625 MANUFACTURING SPECIFICATION FOR BLACK ANODIC OXIDATION TREATMENT, SULFURIC ACID PROCESS (FINISH NO. 27) ANODIC ING, ALUMINUM AND ALUMINUM ALLOYS ANODIC ING, ALUMINUM AND ALUMINUM ALLOYS II II CLASS 1 CLASS 2

17 SPEC CODE DETAIL PAGE Page 2 of 2 5/12/2011 MIL-A-8625 ANODIC ING, ALUMINUM AND ALUMINUM ALLOYS II NGPS 258 SULPHURIC ACID ANODISING OF ALUMINIUM & ALUMINIUM ALLOYS PS-1039 SURFURIC ACID ANODIZING OF ALUMINUM ALLOYS S BRIGHT ANODIZING ON ALUMINUM (REFLECTORS) Terms & Conditions Privacy Statement Honeywell International Inc. All Rights Reserved. Best viewed with Internet Explorer v6.0 or above.

18 SPEC CODE DETAIL PAGE Page 1 of 2 5/12/2011 Close Approval Codes:: Code Number Details Code Number Details Code Number : CP.ANDZ.H Specification Number : CP.ANDZ.H Description : HARD Revision : Spec Status : ACTIVE Audit Requirement : NADCAP Site Specific : N Part Number Specific : N Export Restricted : N Controlling Country : USA Comments : Code Details Type Class Grade/Other Category Family On Site Required SCA Required Code Detail Scope Approved Sources CHEMICAL PROCESSING Y Y AC7108- ANODIZING Specification Number Details 22 results found, displaying 1 to 22 Specification Number Specification Description/Title Type Class Grade/Other 1-TS-Q-002 ANODISATION DES PIECES EN ALLIAGE D'ALUMINIUM OAD AMS 2468 AMS 2469 AMS 2482 HARD ANODIC ING TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS PROCESS AND PERFORMANCE REQUIREMENTS HARD ANODIC ING TREATMENT OF ALUMINUM AND ALUMINUM ALLOYS PROCESS AND PERFORMANCE REQUIREMENTS TEFLON TREAT AL ALY 1 AMS 2482 TEFLON TREAT AL ALY 2 DEF STAN HARD ANODISING OF ALUMINIUM & ALUMINIUM ALLOYS EMS52401 HARD ANODIZING IN ACCORDANCE WITH MIL-A-8625, III EMS52456 HARD ANODIZING SPECIAL ALLOYS EMS52480 Hard Anodizing For F-18 (Supsd by EMS52401) ES-0725 HARD ANODIC TREATMENT OF ALUMINUM ALLOYS ES-1364 SPECIFICATION FOR FLUOURINATED ETHYLENE PROPYLENE (FEP) IMPREGNATED HARD GPS ANODIC ING, HARD, ALUMINUM AND ALUMINUM ALLOYS GPS ING,, HARD (SPECIAL) ALUMINUM MIL-A ALUMINUM OXIDE LUBRICANT ING I

19 SPEC CODE DETAIL PAGE Page 2 of 2 5/12/2011 MIL-A ALUMINUM OXIDE LUBRICANT ING II MIL-A MIL-A-8625 MIL-A-8625 ALUMINUM OXIDE LUBRICANT ING ANODIC ING, ALUMINUM AND ALUMINUM ALLOYS ANODIC ING, ALUMINUM AND ALUMINUM ALLOYS III III III CLASS 1 CLASS 2 MIL-A-8625 ANODIC ING, ALUMINUM AND ALUMINUM ALLOYS III NGPS 37 HARD ANODISING OF ALUMINIUM & ALUMINIUM ALLOYS PS-1003 ING, ANODIC, HARD PS-1311 ING, FEP IMPREGNATED HARD Terms & Conditions Privacy Statement Honeywell International Inc. All Rights Reserved. Best viewed with Internet Explorer v6.0 or above.

20 SPEC CODE DETAIL PAGE Page 1 of 2 5/12/2011 Close Approval Codes:: Code Number Details Code Number Details Code Number : CP.CNV.A Specification Number : CP.CNV.A Description : CONVERSION ING - ALUMINUM Revision : Spec Status : ACTIVE Audit Requirement : NADCAP Site Specific : N Part Number Specific : N Export Restricted : N Controlling Country : USA Comments : Code Details Type Class Grade/Other Category Family CHEMICAL Y PROCESSING On Site Required SCA Required Y Code Detail Scope AC7108- CONV/PHOS INGS Approved Sources Specification Number Details 26 results found, displaying 1 to 26 Specification Number Specification Description/Title Type Class Grade/Other CLEAR CROMATE CONVERSION ON ALUMINUM FINISH SPECIFICATION - GOLD CHROMATE CONVERSION ON ALUMINUM CHROMATE CONVERSION ING ALUMINUM 1-TS-P TS-P ALODINE IRIDITE TRAITEMENT ALODINE 1200 SUR ECHANGEUR EN ALLIAGE D'ALUMINIUM TRAITEMENT ALODINE 1200 DES RESERVOIRS EN ALLIAGE D'ALUMINIUM AMS 2473 CHEM FILM TREATMENT FOR ALUMINUM ALLOYS AMS 2474 AMS 2477 AMS-C-5541 CHEMICAL FILM TREATMENT FOR ALUMINUM ALLOYS, LOW ELECTRICAL RESISTANCE, ING CONVERSION ING FOR ALUMINUM ALLOYS LOW ELECTRICAL RESISTANCE ING CHEMICAL CONVERSION INGS ON ALUMINUM AND ALUMINUM ALLOYS DEF STAN CHROMATE CONVERSION INGS EMS52487 Chemical Conversion Coatings on Aluminum And Aluminum Alloys for F-18 (Supsd by MIL-C-5541, Classes 1a and 3 as

21 SPEC CODE DETAIL PAGE Page 2 of 2 5/12/2011 ES-0598 Applicable) CHEMICAL TREATMENT FOR ALUMINUM AND ALUMINUM ALLOYS GPS ING, CHEM FILM GPS F18;CTG;CHEM FILM (SUPERSEDED BY MIL-C-5541) M MIL-C-5541 MIL-C-5541 MIL-C-5541 MIL-DTL-5541 NGPS 30 PROCESS SPECIFICATION FOR CHEMICAL CONVERSION ING OF ALUMINUM AND ALUMINUM ALLOYS (FINISH NO. 40 & 40A) CHEMICAL CONVERSION INGS ON ALUMINUM AND ALUMINUM ALLOYS CHEMICAL CONVERSION INGS ON ALUMINUM AND ALUMINUM ALLOYS CHEMICAL CONVERSION INGS ON ALUMINUM AND ALUMINUM ALLOYS CHEMICAL CONVERSION INGS ON ALUMINUM AND ALUMINUM ALLOYS CHROMATE CONVERSION INGS FOR ALUMINIUM & ALUMINIUM ALLOYS NGPS 30 CHROMATE CONVERSION INGS FOR ALUMINIUM & ALUMINIUM ALLOYS PC APPLICATION OF CHROMATE FILM ON ALUMINUM PS-1026 CHEMICAL TREATMENT FOR ALUMINUM AND ALUMIN PS-1034 IMMERSION OR SPRAY CHEMICAL TREATMENT FOR A CLASS 1A CLASS 3 INCLUDES NGPS NGPS Terms & Conditions Privacy Statement Honeywell International Inc. All Rights Reserved. Best viewed with Internet Explorer v6.0 or above.