Type HSSXE Gold-Line made of high-alloy HSS-XE steel with a Gold-Tech surface treatment.

Transcription

1 Core drills for magnetic core drilling machines With weldon connection and a Fein Quick In connection. Hole Saws with carbide tip teeth Karnasch POWER-MAX Heavy Duty Type HSSXE Gold-Line made of high-alloy HSS-XE steel with a Gold-Tech surface treatment. For use in standard steel but also alloyed steels. For extreme hardness at the top of the tooth (ip to 68 HRC) thus guaranteeing a higher wear resistance and lifetime. Gold Tech surface treatment for longer life times. Completely made "FULLY GROUNDED" this refining rises the cutting ability with reducing friction at the same time. For an exeeded life time. Connection UNI WELDON 19mm. Size mm. Short model Size mm. Cutting depth 30 mm. 36GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT Ejector pin for the drill with a cutting depth of 30mm, useful for drills from 12 up to 60mm diameter. 36GT2052 Ejector pin 6,34 x 77mm Top Pag. 36/04

2 Type HSSXE Gold-Line made of high-alloy HSS-XE steel with a Gold-Tech surface treatment. Size mm. Long model Size mm. Cutting depth 55 mm. 36GT mm Weldon Shank 36GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT Ejector pin for the drill with a cutting depth of 55mm, useful for drills from 12 up to 60mm diameter. 36GT2110 Ejector pin 6,34 x 102mm Size mm. Long model Size mm. Cutting depth 80 mm. 36GT mm Weldon Shank 36GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT2160 Ejector pin 6,34 x 130mm

3 Type HSSXE Gold-Line made of high-alloy HSS-XE steel with a Gold-Tech surface treatment. Size mm. Short model Size mm. Cutting depth 40 mm 36GTF GTF GTF FOR FEIN (QUICK IN) 36GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GTF GT GTF GTF GTF GTF GTF GTF GTF Ejector pin for the drill with a cutting depth of 40mm, useful for drills from 12 up to 60mm diameter. 36GTF2052 Ejector pin 6,34 x 90mm Core drill sets Gold-Tech Karnasch Gold Tech sets 36GTS GTS GTS GTS GTS GTS pieces cutting depth 30mm 1x14, 16, 2x18, 20, 22mm 29 pieces cutting depth 30mm 1x12 tot 36mm per 1mm upwards 43 pieces cutting depth 30mm 1x12 tot 50mm per 1 mm upwards 10 pieces cutting depth 55mm 1x14, 16, 2x18, 20, 22mm 29 pieces cutting depth 55mm 1x12 tot 36mm per 1mm upwards 43 pieces cutting depth 55mm 1x12 tot 50mm per 1 mm upwards

4 Type HSS-XE Blue-Line made of high-alloy steel with a Dura-Blue surface treatment. For extreme hardness at the tip of the thooth (up to 68HRC) thus guaranteeing a high wear resistance and lifetime. Only few manufacturers are capable of producing step hardened core drills. For Karnasch this is "STANDARD". This makes extremely hard tooth tips (68 HRC) and yet a flexible core drill. Seven different cutting geometries optimally adapted to the different diameter and cutting depths lead to high performance cutting results. The first class core drills are equipped with the unique and patented Dureable Coating. Extreme surface hardness and sleekness yield extreme lifetimes even under non-optimum circumstances like "overhead work", dry-drilling etc. For steel, stainless, Alu, Copper, Brass, Tin, plastics and grey cast iron. Completely made "Fully Ground" rises the cutting ability, reducing friction exceeded lifetime. Size mm. Short model Size mm. Cutting depth 30 mm Weldon 19mm shank Ejector pin for the drill with a cutting depth of 30mm, useful for drills from 12 up to 60mm diameter Ejector pin 6,34 x 77mm Ejector pin 6,34 x 102mm Size mm. Long model Size mm. Cutting depth 55 mm Weldon 19mm shank

5 Type HSS-XE Blue-Line made of high-alloy steel with a Dura-Blue surface treatment. Size mm. Long model Size mm. Cutting depth 80 mm Weldon 19mm shank Ejector pin 6,34 x 130mm Core Drill Sets Gold-Tech Karnasch Blue-Line sets 36GTB GTB pieces cutting depth 30mm 1x14, 16, 2x18, 20, 22mm 10 pieces cutting depth 55mm 1x14, 16, 2x18, 20, 22mm Inox Cutting paste Specially developped for heavy duty applications, such as drilling and cutting tough alloys such as Chrome-Nickel-steel, Titanium, Manganese steel. Nummer Omschrijving Inox cutting paste tube 60 ml. Cutting paste Core drill cutting paste for extreme drilling applications. With a superb adhesion to the cutting teeth of the drill bit Becomes fluid during drilling operation (simply dip the tool into the paste). Free of chlorides and enviromentally friendly. For difficult to cut materials like Titanium, Chrome-nickel-alloys, chrome-nickel-alloys, rust and heat resistant steel Cutting paste RP-25 tin 250 gram Cutting paste RP-25 tin 750 gram

6 Carbide tipped Karnasch POWER-MAX 30 SUPER HEAVY-DUTY hole saw / core drill The "Easy-Change" quick change system of the POWER-MAX hole saws series for almost unlimited use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines. The body is suitable on all types of machines because of the exchangeable shank system. DRILLING DEPTH 30MM. Permits processing of almost all steel type, from construction steel to stainless steels. Also great for drilling in non-ferrous metals such as aluminium, copper and brass and ideal for drilling in plastics. CFK/GFK and sandwich-material. Center drill TIALN coated comes with cross grinding for centering without running off (center punching not neccessary). Max. recommended Ø on handheld machines 40mm Max. recommended Ø on stationary and core drilling machines 150mm All saws comes with exchangeable shank and drill. Quick removal of drilled core through ejector spring from Ø19-150mm Quick removal of drilled core possible from Ø14mm * * = with POWER-DRILL 4000 Standard shaft connection 13mm. Size mm. Size mm. 36K K K K K K K ,5 36K K K K K K K K K ,5 36K ,5 36K K K K K K K K K K K K ,5 36K K K K K K K K K K K K K K K K ,5 36K K K K K K K K K K K K K K K K K K ,5 36K K K K K K K K K K K K K K K K K K K K K K ,5 36K K K K K K Use cutting paste for a longer tool life

7 Carbide tipped Karnasch POWER-MAX 30 SUPER HEAVY-DUTY hole saw / core drill The "Easy-Change" quick change system of the POWER-MAX hole saws series for almost unlimited use on hand-drilling machines, pillar drilling machines, radial drilling machines, lathes and magnetic hole cutting machines. The body is suitable on all types of machines because of the exchangeable shank system. DRILLING DEPTH 55MM. Permits processing of almost all steel type, from construction steel to stainless steels. Also great for drilling in non-ferrous metals such as aluminium, copper and brass and ideal for drilling in plastics. CFK/GFK and sandwich-material. Center drill TIALN coated comes with cross grinding for centering without running off (center punching not neccessary). Max. recommended Ø on handheld machines 40mm Max. recommended Ø on stationary and core drilling machines 150mm All saws comes with exchangeable shank and drill. Quick removal of drilled core through ejector spring from Ø19-150mm Quick removal of drilled core possible from Ø14mm * * = with POWER-DRILL 4000 Standard shaft connection 13mm. Size mm. Size mm. 36K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K K Use cutting paste for a longer tool life

8 Karnasch POWER-MAX ACCESSORIES Hole saw / core cutter holder with hexagon shank 36K K Shank Ø10mm (Ø14-60mm) Shank Ø13mm (Ø61-120mm) Hole saw / core cutter holder with Morse Taper shank 36K K MT2 (Ø14-120mm) MT3 (Ø14-120mm) Hole saw / core cutter holder with SDS PLUS shank 36K SDS PLUS (Ø16-100mm) Hole saw / core cutter Weldon Adapter 36K Weldon 19mm (3/4") Hole saw / core cutter Fein Quick-in Adapter 36K Fein Quick-in 18mm Center drill / pilot drill 36K K x80mm (Ø15-60mm) 8x80mm (Ø61-120mm) for MT and hex. Holder. Karnasch HSSE-XE Special steel twist drill with Weldon shank. CBN cut twist drill with a Weldon 19mm (3/4") shank connection for us with magnetic drill machines and pillar drilling machines. Suitable for almost all steel types. Size mm. 36V V V V V V