PRECISION TOOLS INNOVATIONS

Transcription

1 INNOVATIONS 2016

2 RS126e PREMIUMline light and handy N clamping force Right-/ left-handed rotation 2 speed gearbox Speed controller automatic coolant supply High-performance motor Art. no RS Price on request. Technical data: Magnetic clamping force: N kg Weight: 19,0 kg Thread cutting up to M 30 Total Power consumption: Watt Adapter: Morse taper MT 2 Cutting depth core drills: up to 110,0 Rotation speeds: 1st gear: r.p.m. 2nd gear: r.p.m. Drill chuck: 3,0-16,0 Input voltage: Volt Height: 580,0-655,0 Core drills: 12,0-60,0 Conformity with: VDE, CEE Lift: 200,0 Countersinker: 4,3-40,0 Countersink with MT 2 shank Length and width: 230,0 x 108,0 Twist drills: DIN 338: max. 16,0 DIN 1897: max. 16,0 DIN 345: max. 23,0 Accessories 1 Plastic shipping case 1 Drill drift 1 Safety belt 1 Drill chuck 3,0-16,0, article no Coolant bottle + sprayer 1 Protective work gloves 1 Safety goggles 1 Ear protectors 1 EasyLock article no Cuttting paste 30 g article no

3 A10 BASICline Easy readjustment thanks to 50% reduction in magnetic power when the motor is switched off. Height-adjustable power unit thanks to double dovetail guide. Very light / easy to use N clamping force Automatic coolant supply Art. no A Price on request. Technical data: Magnetic clamping force: N Length and width: 160,0 x 80,0 Countersinker: max. 35,0 Total Power consumption: Watt kg Weight: 10,5 kg Cutting depth core drills: up to 110,0 Rotation speeds: 700 r.p.m Adapter: Weldon: 19,0 (3/4 ) Input voltage: Volt Height: 400,0-580,0 Twist drills: DIN 338: max. 13,0 Conformity with: VDE, CEE Lift: 120,0 Core drills: 12,0-35,0 Accessories 1 Magnetic-stand drilling machine incl. arbor holder 1 Plastic tool case 1 Safety belt 3 Allen key 2,5 / 4 / 6 1 Cooling bottle 1 Operating instructions 3

4 DIN SPEED 338 CUT 5 x D h8 4,0 Twist drills DIN 338 "SPEEDCut" -G with special ground» The innovative cutting geometry enables round, precise drill holes with little burr formation even in thin sheet metal.» The special grinder is self-pulling, so there is no punching of the material.» High level of circle-cutting precision» The 3-surface-shank provides an excellent fixing within the drill chuck with little effort. In addition, the shank ensures an ideal power transmission. No spinning of the drill!» The 118º high performance cutting edge ensures a very high aligned preciseness, particularly when hand-operated with a cordless drilling machine.» Increased wear resistance of the rechargeable battery due to reduction of cutting forces.» The black bevel increases the wear resistance and prevents cold welding and build-up edges. L1 L2 Packing unit: in plastic box Steel (N/2) < 900 Steel (N/2) < 1100 Steel (N/2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed L1 L2 L1 L2 1,00 34,0 12, ,65 1,50 40,0 18, ,65 1,60 43,0 20, ,68 2,00 49,0 24, ,68 2,10 49,0 24, ,72 2,50 57,0 30, ,72 3,00 61,0 33, ,89 3,30 65,0 36, ,96 3,50 70,0 39, ,96 4,00 75,0 43, ,32 4,20 75,0 43, ,52 4,50 80,0 47, ,52 5,00 86,0 52, ,88 5,50 93,0 57, ,41 6,00 93,0 57, ,69 6,50 101,0 63, ,88 6,80 109,0 69, ,53 7,00 109,0 69, ,53 7,50 109,0 69, ,01 8,00 117,0 75, ,02 8,50 117,0 75, ,39 9,00 125,0 81, ,25 9,50 125,0 81, ,82 10,00 133,0 87, ,95 10,20 133,0 87, ,87 10,50 133,0 87, ,98 11,00 142,0 94, ,22 11,50 142,0 94, ,04 12,00 151,0 101, ,45 12,50 151,0 101, ,44 13,00 151,0 101, ,36 Twist drill sets DIN 338 "SPEEDCut" -G with special ground 19-piece set of twist drills DIN 338 "SPEEDCut" 1,0 up to 10,0 in increments of 0,5 in steel case 25-piece set of twist drills DIN 338 "SPEEDCut" 1,0 up to 13,0 in increments of 0,5 in steel case , ,50 19-piece set of twist drills DIN 338 "SPEEDCut" 1,0 up to 10,0 in increments of 0,5 in plastic case 25-piece set of twist drills DIN 338 "SPEEDCut" 1,0 up to 13,0 in increments of 0,5 in plastic case RO 76, RO 149, RO 4

5 DIN 338 SPEEDCut

6 DIN 338 N 5 x D 2, C h8 Twist drill DIN 338 type N, -G with TiN-coated bits High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure. L2 The titanium nitride coating is a universally usable standard coating. It has a % longer service life than non-coated materials. Cooling is recoended. L1 Packing unit: in plastic box Steel (N/2) < 900 Steel (N/2) < 1100 Steel (N/2) < 1300 Stainless steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed L1 L2 L1 L2 1,00 34,0 12, T 10 0,78 1,50 40,0 18, T 10 0,78 1,60 43,0 20, T 10 0,78 2,00 49,0 24, T 10 0,78 2,10 49,0 24, T 10 0,83 2,50 57,0 30, T 10 0,83 3,00 61,0 33, T 10 0,83 3,30 65,0 36, T 10 0,97 3,50 70,0 39, T 10 0,97 4,00 75,0 43, T 10 1,09 4,20 75,0 43, T 10 1,26 4,50 80,0 47, T 10 1,26 5,00 86,0 52, T 10 1,48 5,50 93,0 57, T 10 1,75 6,00 93,0 57, T 10 1,91 6,50 101,0 63, T 10 2,37 6,80 109,0 69, T 10 2,81 7,00 109,0 69, T 10 2,81 7,50 109,0 69, T 10 2,92 8,00 117,0 75, T 10 3,40 8,50 117,0 75, T 10 3,73 9,00 125,0 81, T 10 4,36 9,50 125,0 81, T 10 4,73 10,00 133,0 87, T 10 6,49 10,20 133,0 87, T 10 6,49 10,50 133,0 87, T 5 6,49 11,00 142,0 94, T 5 7,65 11,50 142,0 94, T 5 8,14 12,00 151,0 101, T 5 8,83 12,50 151,0 101, T 5 9,60 13,00 151,0 101, T 5 10,70 Twist drill sets DIN 338 type N, -G with TiN-coated bits 19-piece set of twist drills DIN 338 type N 1,0 up to 10,0 in increments of 0,5 in steel case 25-piece set of twist drills DIN 338 type N 1,0 up to 13,0 in increments of 0,5 in steel case T 55, T 102,97 19-piece set of twist drills DIN 338 type N 1,0 up to 10,0 in increments of 0,5 in plastic case 25-piece set of twist drills DIN 338 type N 1,0 up to 13,0 in increments of 0,5 in plastic case TRO 55, TRO 102, TRO 6 Main application Other application

7 MF 4,0 2 Screw-hole punches with three-point cutting tip Die: 2-point cutting tip Material: special steel Draw-in bolt: metric fine-threads, from MF 10 grade 12.9 Particulary suitable for stainless-steel sheets, sheet steel, non-ferrous and light metals, plastics. Perfect for plumbers. Our screw-hole punches with ball-bearing will be delivered with Red-Ring. Packing unit: individual cartons 2-point punch - Up to 40% less power required - Less wear and tear - More precise punching Grounded matrix - Better coating on the surface of the workpiece - Better punching result with defined cutting edge Through dimensions M PG Conduit& Pipe Size inch Draw-in bolt MF Art. no standard Art. no ball-bearing 12, /2" MF , ,2 9 MF , K 44, ,5 16 MF , K 49, ,6 11 MF , K 46, , ,5 MF , K 46, ,5 16 1/2" 7/8" MF , K 48, ,4 25 1" MF , K 52, ,3 21 3/4" MF , K 52, ,7 MF , K 56, ,0 MF , K 56, ,5 32 MF , K 59, ,0 MF , K 59, ,0 1 3/8" MF , K 59, ,0 29 MF , K 59, ,5 MF , K 78, ,0 36 MF , K 89, ,5 50 MF , K 108, , /8" MF , K 115,30 1 Professional set of screw-hole punches for plumbing Art. no 3 x 2-point screw-holae punche 1 x 28,3, 1 x 32,0 und 1 x 35,0 (especially for stainless steel V2A). 1 x tube and sheet drill TiN size 2 2 x draw-in bolts MF 12 x 1,5 - grade x ball-bearing draw-in bolt MF 12 x 1,5 grade x ring-open end spanner size 19, ,90 7

8 MF 4,0 2 Sets of screw-hole punches in plastic cases Type Description Article no. Set 1 Set 2 Set piece set of screw-hole punches 6 screw-hole punches 15,2 (PG 9) - 18,6 (PG 11) - 20,4 (M 20 / PG 13,5) - 22,5 (PG 16) - 28,3 (PG 21) + 32,0 + 1 tube and sheet drill size draw-in bolts MF 10 x 1,0 x 45, grade draw-in bolt MF 12 x 1,5 x 55, grade piece set of screw-hole punches 8 screw-hole punches 15,2 (PG 9) - 18,6 (PG 11) - 20,4 (M 20 / PG 13,5) - 22,5 (PG 16) - 28,3 (PG 21) - 37,0 (PG 29) - 47,0 (PG 36) + 54,0 (PG 42) + 1 tube and sheet drill size draw-in bolt MF 10 x 1,0 x 45 / MF 12 x 1,5 x 55 / MF 16 x 1,5 x 60, grade piece set of screw-hole punches 5 screw-hole punches 16,5 (M 16) - 20,4 (M 20 / PG 13,5) - 25,4 (M 25) - 32,5 (M 32) + 40,5 (M 40) + 1 tube and sheet drill size draw-in bolt MF 10 x 1,0 x 45 / MF 12 x 1,5 x 55 / MF 16 x 1,5 x 60, grade , , ,80 Sets of screw-hole punches with compact manual hydraulic punch in plastic case Type Description Article no. Satz 5 hydraulic 12 - piece set of screw-hole punches with compact manual hydraulic punch 1 compact manual hydraulic punch + 8 screw-hole punches 16,5 (M 16) - 20,4 (M 20 / PG 13,5) - 25,4 (M 25) - 32,5 (M 32) - 40,5 (M 40) + 50,5 (M 50) + 1 tube and sheet drill size distance sleeve + 1 adapter bolt MF 10 x 1,0 / MF 12 x 1,5 / MF 16 x 1,5 pulling power 50 kn - 3/4" UNF ,50 Satz 6 Hydraulik 14 - piece set of screw-hole punches with compact manual hydraulic punch 1 compact manual hydraulic punch + 8 screw-hole punches 15,2 (PG 9) - 18,6 (PG11) - 20,4 (M 20 / PG 13,5) - 22,5 (PG 16) - 28,3 (PG 21) - 37,0 (PG 29) - 47,0 (PG 36) + 54,0 (PG 42) + 1 tube and sheet drill size distance sleeve + 1 adapter bolt MF 10 x 1,0 / MF 12 x 1,5 / MF 16 x 1,5 pulling power 50 kn - 3/4" UNF ,50 8

9 MF 4,0 2 Sets of screw-hole punches with ball-bearing in plastic cases Type Description Article no. Set 1 K Set 2 K Set 3 K 11 - piece set of screw-hole punches 6 screw-hole punches 15,2 (PG 9) - 18,6 (PG 11) - 20,4 (M 20 / PG 13,5) - 22,5 (PG 16) - 28,3 (PG 21) + 32,0 + 1 tube and sheet drill size ball-bearing draw-in bolts MF 10 x 1,0 x 50, grade ball-bearing draw-in bolt MF 12 x 1,5 x 60, grade piece set of screw-hole punches 8 screw-hole punches 15,2 (PG 9) - 18,6 (PG 11) - 20,4 (M 20 / PG 13,5) - 22,5 (PG 16) - 28,3 (PG 21) - 37,0 (PG 29) - 47,0 (PG 36) + 54,0 (PG 42) + 1 tube and sheet drill size ball-bearing draw-in bolt MF 10 x 1,0 x 50 / MF 12 x 1,5 x 60 / MF 16 x 1,5 x 70, grade piece set of screw-hole punches 5 screw-hole punches 16,5 (M 16) - 20,4 (M 20 / PG 13,5) - 25,4 (M 25) - 32,5 (M 32) + 40,5 (M 40) + 1 tube and sheet drill size ball-bearing draw-in bolt MF 10 x 1,0 x 50 / MF 12 x 1,5 x 60 / MF 16 x 1,5 x 70, grade K 232, K 498, K 359, K K 9

10 10

11 Copy Complete Fax RUKO GmbH precision tools Holzgerlingen Germany Phone oders: +49 (0)7031/ Fax order hotline: +49 (0)7031/ ORDER Customer no: Phone: Fax: Contact Person: Representative: Date: Address: Quantity Designation Article no. Quantity Designation Article no. Our general terms and conditions of sale and delivery apply. 11

12 RUKO GmbH Robert-Bosch-Straße Holzgerlingen Germany Tel.: +49(0)7031 / Internet: info@ruko.de Export sales Tel.: +49(0)7031 / / 84 / 85 / 790 Fax. +49(0)7031 / / 66 All rights reserved. This catalogue is protected by copyright law and remains solely our property. We reserve the right to make changes to technical data. Images are non-binding. Liability for printing errors is excluded. This catalogue invalidates any previous editions. RUKO dealer cross prices in exc. VAT. 1. Edition March 2016