Rexnord 1701 TableTop Chain

Transcription

1 1701 DIRECTION OF TRVE Drawing (Straight) 2.19 in (55.6 mm) 0.18 in (4.5 mm) (Curve) 2.34 in (59.4 mm) Rexnord 1701 TableTop Min. Side-flex Photo shows 1701 TableTop molded in ow Friction (F) material. Information Min. Side-flex desc in mm in mm lbs/ft kg/m N/ Min. Back-flex 1.50 in (38.1 mm) Height Over Centerline 0.50 in (12.7 mm) Height Pitch 1.97 in (50.0 mm) Pin 0.32 in (8.1 mm) vailable s Prefix Temperature Standard Fahrenheit Celsius FD Strength Pin pproval dry wet dry wet lbs N Standard s F ow Friction Stainless Steel ,669 Yes Made-to-Order s BWR Black Wear Resistant Stainless Steel NR NR 720 3,203 No HP High Performance Stainless Steel ,669 Yes PS Platinum Series Stainless Steel ,669 Yes WF White ow Friction Stainless Steel ,669 Yes WX Green brasion Resistant Polyamide Stainless Steel NR NR 600 2,669 No Regulatory Information dditional Notes The Food and Drug distration (FD) accepts certain materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, C. ll rights reserved. U.S. Patents: , EP Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. rmor-clad cap material is stainless steel. strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio. Rexnord 1701 Series TableTop Product Portfolio TT Multiflex

2 Rexnord 1701 TB TableTop 1701 TB DIRECTION OF TRVE Min. Side-flex Drawing TB 2.63 in (66.8 mm) Straight 2.34 in (59.5 mm) 0.18 in (4.5 mm) Curve 2.25 in (57.2 mm) Top to TB Top 0.75 in (19.1 mm) Photo shows 1701 TB TableTop molded in ow Friction (F) material. Information Min. Side-flex desc in mm in mm lbs/ft kg/m N/ Min. Back-flex 1.50 in (38.1 mm) Height Over Centerline 0.50 in (12.7 mm) Height Pitch 1.97 in (50.0 mm) Pin 0.32 in (8.1 mm) vailable s Prefix Temperature Standard Fahrenheit Celsius FD Strength Pin pproval dry wet dry wet lbs N Standard s BWR Black Wear Resistant Stainless Steel NR NR 720 3,203 No F ow Friction Stainless Steel ,669 Yes MF Medium Duty ow Friction Zinc d Steel ,669 No Made-to-Order s S nti-static Stainless Steel NR NR 360 1,601 No DUV Plain cetal Ultraviolet Resistant Stainless Steel ,669 No HP High Performance Stainless Steel ,669 Yes P Chemical Resistant Stainless Steel ,135 Yes PS Platinum Series Stainless Steel ,669 Yes WHP White High Performance Stainless Steel ,669 Yes WF White ow Friction Stainless Steel ,669 Yes WSM White Cut Resistant Stainless Steel ,669 Yes WX Green brasion Resistant Polyamide Stainless Steel NR NR 600 2,669 No Multiflex TT Regulatory Information The Food and Drug distration (FD) accepts certain materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, TableTop, Platinum Series, HP and PS are trademarks of Rexnord Industries, C. ll rights reserved. U.S. Patents: , EP dditional Notes Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. HC1731 is BWR 1701TB with special hardened carbon steel pins. strength is listed at room temperature.nr = Not Recommended. For additional material information, see material portfolio. Rexnord 1701 Series TableTop Product Portfolio

3 1701 TB C Photo shows 1701 TB TableTop with rmor-clad (C) top surface molded in ow Friction (F) material. Information Min. Side-flex desc in mm in mm lbs/ft kg/m N/ DIRECTION OF TRVE Min. Side-flex Min. Back-flex 1.50 in (38.1 mm) Drawing TB 2.63 in (66.8 mm) Height Over Centerline 0.50 in (12.7 mm) Straight 2.34 in (59.5 mm) Height 0.20 in (5.1 mm) Curve 2.25 in (57.2 mm) Top to TB Top 0.75 in (19.1 mm) Rexnord 1701 TB TableTop with rmor-clad Surface Pitch 1.97 in (50.0 mm) Pin 0.32 in (8.1 mm) vailable s Temperature Standard Fahrenheit Celsius FD Prefix Strength Pin pproval dry wet dry wet lbs N Standard s F ow Friction Stainless Steel ,669 Yes Regulatory Information dditional Notes The Food and Drug distration (FD) accepts certain materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, TableTop and HP are trademarks of Rexnord Industries, C. ll rights reserved. Stocked in 61 pitch, 10 ft (3.048 m) length strands. Zinc plated carbon steel pins are available on a made-to-order basis. Pin material can be identified by pivot color; black pivots indicate stainless steel pins and tan pivots indicate zinc plated carbon steel pins. rmor-clad cap material is stainless steel. strength is listed at room temperature. NR = Not Recommended. For additional material information, see material portfolio. Rexnord 1701 Series TableTop Product Portfolio TT Multiflex

4 1700 Semi-Steel Sprocket N1700 Thermoplastic Sprocket 1700 Idler Wheel 0.44 in (11.2 mm) Face 0.43 in (10.9 mm) Face 2.00 in (50.8 mm) Face ength thru Bore 1.56 in (39.6 mm) Bore Pitch Outside ength thru Bore 1.88 in (47.8 mm) Bore Pitch Outside ength thru Bore 2.14 in (54.4 mm) Bore Outside 1700 Semi-Steel Sprocket Information Bore (Shaft-Ready) Pitch Outside Bore (Round) Round Square Of Teeth in mm in mm in mm actual effect in mm in mm lbs kg /4 1 9/ /4 1 3/ /4 1 3/ /4 1 3/ /4 1 3/ /4 1 3/ Rexnord 1701 Series TableTop Compatible Sprockets Shaft-ready round bore sprockets are shipped with keyway and setscrew. Of Teeth Pitch Outside N1700 Thermoplastic Sprocket Information Bore (Shaft-Ready) Round Hex Bore (Idler) actual effect in mm in mm in mm Equivalent Tooth Size Outside 1700 Idler Wheel Imperial Information Imperial Bore (Idler) in mm in lbs kg /8 in Idler wheels are designed to spin freely on the shaft. Equivalent Tooth Size Outside 1700 Idler Wheel Metric Information Metric Bore (Idler) in mm mm lbs kg mm Idler wheels are designed to spin freely on the shaft. TT Rexnord 1701 Series TableTop Product Portfolio

5 (Two Piece) Track ngle 90.0 Noal Corner View - Bevel ngle 8.0 Corner track kit supplied as one 90 inside and one 90 outside track, which can be used as either carry or return. View - TB Design Kit ccomodates Top Noal Corner )(Four Piece) Color Kit in mm in mm in mm in mm N24B5 ll ll Nylatron Black TB Design N24R5 ll ll Nylatron Black U24R5 ll ll UHMWPE White Nylatron is a registered trademark of Quadrant Engineering Plastics Products. Track ngle 45.0 (Each Track) Gap Between Each Track 0.1 in (3.0 mm) Noal Corner View - View - TB Design Bevel ngle 8.0 Rexnord 1701 Series TableTop ccessories Corner track kit supplied as two 45 inside and two 45 outside track, which can be used as either carry or return. Kit ccomodates Top Noal Corner Color Kit in mm in mm in mm in mm N30B5 ll ll Nylatron Black TB Design N30R5 ll ll Nylatron Black Nylatron is a registered trademark of Quadrant Engineering Plastics Products. Rexnord 1701 Series TableTop Product Portfolio TT

6 (Flat Top) C to Center Outside Rim 0.78 in (19.8 mm) Bottom of to 1.47 in (37.3 mm) 3/4-16 UNC - 2 Top of to 2.41 in (61.2 mm) : luum. to Center For 1701 (bevel) chain only. Outside 1701 FT FT (Flat Top) Rexnord 1701 Series TableTop ccessories Bottom of to 1.47 in (37.3 mm) C to Center Outside 3/4-16 UNC - 2 Rim 0.62 in (15.7 mm) Top of to 2.41 in (61.2 mm) to Outside Center 1701TB FT TB FT : luum. For 1701 TB chain only. (Raised Hub) C to Center Outside Hub 2.62 in (66.5 mm) Top of Hub to Bottom of Rim 2.06 in (52.3 mm) Bottom of to 0.17 in (4.3 mm) 3/4-16 UNC - 2 Rib Bottom to Rib Bottom to to Top of Rib 1.12 in (28.4 mm) to Outside Center 1701 RH : luum. For 1701 (bevel) chain only. TT Rexnord 1701 Series TableTop Product Portfolio

7 (Raised Hub) Bottom of to 0.17 in (4.3 mm) C to Center Outside Rim 0.69 in (17.5 mm) 3/4-16 UNC - 2 Hub 2.62 in (66.5 mm) Top of Hub to Bottom of Rim 2.06 in (52.3 mm) to Top of Rib 1.12 in (28.4 mm) : luum. For 1701 TB chain only. to Center Outside 1701TB RH Extended Pivot Pivot Height Please indicate if you require an extended pivot every pitch, every second pitch, etc. when ordering. For 1701 and 1701 TB chains only. Do not use with C 1701 TB chain. Rexnord 1701 Series TableTop ccessories Rexnord 1701 Series TableTop Product Portfolio TT