MXBS SOCKET-OUTLET COMBINATION BOXES 63 A TECHNICAL FEATURES

Transcription

1 MXBS SOCKETOUTLET COMBINATION BOXES A II G D Ex e ia OR ib IIC IP WATER AND DUSTTIGHT UP TO SOCKETOUTLETS ASSEMBLY OF MULTICONTACT CONNECTORS AND SOCKETOUTLETS ON THE SAME ENCLOSURE Equipped with 0 to A decontactors and/or 0 A multicontact connectors, these reinforced polyester resin fiberglass and graphite loaded socketoutlet combination boxes are designed for making electrical connections in hazardous areas, offering from to contacts. They provide increased safety and intrinsic safety, allowing them to be used in zones & (gas), & (dust). This comprehensive range is also ideal for wet environments such as food and beverage or chemical industries thanks to their corrosion resistance. It is possible to mount both socketoutlets and multicontact connectors on the same box, with some models able to accommodate up to socketoutlets or connectors. TECHNICAL FEATURES ASSOCIATED MARECHAL PRODUCTS Decontactors Multicontact connectors ELECTRICAL FEATURES Maximum voltage* Maximum nominal current* DXN, DXN and DXN PXNC, DXNC and DXNC 0 V A Stranded wiring (minmax)*, mm Flexible wiring (minmax)*, mm * depending on the socketoutlet Junction Cable entries and glands THERMAL SPECIFICATION Terminal blocks. Feed through and loopin loopout connection M to M depending on the size of the box / Polyamide cable gland for unarmoured cable Nickel plated brass cable gland for unarmoured cable and armoured cable (with plate or washer bonding inside the box) Temperature range and ratings From 0 C to +0 C From 0 C Ta +0 C T to T* From 0 C Ta + C T to T* From 0 C Ta +0 C T * depending on the internal components and socket mix (consult us) MECHANICAL FEATURES Degree of protection IP Shock resistance IK0 according to IEC and EN. Material ATEX MARKINGS ATEX zones Gas and Dust : zones &, & Enclosure made of polyester resin reinforced with fibreglass and graphite loaded for boxes. Casing made of High performance Poly for DXN, DXN and DXN decontactors Casing made of Metal for PXNC, DXNC and DXNC multicontact connectors Stainless steel screw ATEX markings II G D Ex e II T to T Ex td A increased safety G D Ex ia IIC T td A or II G D Ex ib IIC T td A intrinsically safety G D Ex e ia IIC T td A or II G D Exe e ib IIC T td A increased safety and intrinsic safety Standards compliance IEC EN 000, 00, 00, 00 and 00 Certificates Certificates IECEx N IECEx LCI.00 and ATEX N LCIE ATEX 0 0 Catalog International Version

2 MXBS SPECIFICATION Socket boxes IP for hazardous areas (ATEX), comply with BECMA international standard. MAXIMUM NUMBER OF SOCKETOUTLETS PER BOX (T at +0 C ambient temperature) Type DXN DXN DXN PXNC DXNC DXNC Box P+N+E P+E P+N+E P+N+E P+E P+N+E P+N+E P+E P+N+E MXBS MXBS * * * MXBS * * * MXBS * * * MXBS * * * MXBS MXBS MXBS MXBS MXBS0 * T at = 0 C Note : Special configurations, wiring terminal blocks and a mixture of socket outlets are available. Please contact us. MAXIMUM NUMBER OF POLY CABLE GLANDS PER SIDE (For metal cable gland for armoured cable contact us) M M M0 M M M0 M0 M BoxSide (H = mm) (H = mm) (H = mm) (H = mm) (H = mm) (H = mm) (H = 0 mm) (H = 0 mm) MXBS MXBS MXBS MXBS MXBS MXBS MXBS MXBS MXBS MXBS ACCESSORIES ON REQUEST A Inclined sleeve Earth stud Earth bar Hinges Mounting brackets H C B D 0 Catalog International Version

3 MXBJ JUNCTION BOXES 0 A II G D Ex e ia OR ib IIC IP WATER AND DUSTTIGHT GLASS REINFORCED, GRAPHITEFILLED POLYESTER RESIN ENCLOSURES These junction boxes are designed with reinforced polyester resin with fibreglass and graphite loaded, and are designed for making electrical connections in hazardous areas. They provide increased safety and intrinsic safety, allowing them to be used in zones & (gas), & (dust). This comprehensive range is also ideal for wet environments such as food and beverage or chemical industries thanks to their corrosion resistance. TECHNICAL FEATURES ELECTRICAL FEATURES Maximum voltage* Maximum nominal current* 0 V 0 A Flexible or stranded wiring (min max)* 0, 0 mm * depending on the type of terminal connection Cable entries THERMAL SPECIFICATION M to M Temperature range and ratings From C to +0 C From C to +0 C (T = C surface temperature) From C to + C (T = 00 C surface temperature) From C to +0 C (T = C surface temperature) MECHANICAL FEATURES Degree of protection IP Shock resistance IK0 according to IEC and EN. Material ATEX MARKINGS ATEX zones Gas and Dust : zones &, & Casing made of polyester resin reinforced with fibreglass and graphite loaded Stainless steel screws ATEX markings II G D Ex e II T to T Ex td A increased safety G D Ex ia IIC T td A or II G D Ex ib IIC T td A intrinsic safety G D Ex e ia IIC T td A or II G D Exe e ib IIC T td A increased safety and intrinsic safety Standards compliance IEC EN 000, 00, 00, 00 and 00 Certificates Certificates IECEx N IECEx LCI.00 and ATEX N LCIE ATEX 0 ACCESSORIES ON REQUEST A Earth stud Earth bar Shield bar Junction bar Hinges Mounting brackets H C B D 0 Catalog International Version

4 MXBJ SPECIFICATION Junction boxes IP for hazardous areas (ATEX). CONDUCTORS CROSSSECTION : NUMBER OF TERMINALS / In MAX (A). mm. mm mm mm 0 mm mm BoxNr In MaxNr In MaxNr In MaxNr In MaxNr In MaxNr In Max MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ A A A A A A A A A A A A A A A A A A A 0 0 A 0 A A 0 A 0 A 0 A A 0 A A 0 A 0 A A 0 A A 0 A A 0 A A 0 A 0 A A A A A A A A A A A A A A A A A A 0 0 A A A A 0 A A A A A A A A A 0 A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A 0 A A A A A A A A mm mm 0 mm 0 mm mm 0 mm BoxNr In MaxNr In MaxNr In MaxNr In MaxNr In MaxNr In Max MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ MXBJ0 A A A A A A A 0 A 0 A A 0 A 0 A 0 A 0 A 0 A A 0 A A 0 A A 0 A 0 0 A 0 A 0 A 0 A 0 A 0 A A 0 A 0 A 0 A A 0 A 0 A 0 A 0 A 0 A A 0 A 0 A 0 A 0 A 0 A 0 A A A 0 mm mm 0 mm BoxNr In MaxNr In MaxNr In Max MXBJ0 0 A A A 0 A 0 A 0 A MAXIMUM NUMBER OF POLYESTER CABLE GLANDS PER SIDE : idem MXBS 0 Catalog International Version

5 BX JUNCTION BOXES II G D Ex e IIC UP TO 0 V IP/IP WATER AND DUSTTIGHT EQUIPPED WITH TERMINALS AND/OR SOCKETOUTLETS This range is equipped with CRIC increased safety e terminal blocks and cable glands and complies with the //CE Directive. All external fastening accessories are in stainless steel. SPECIFICATION Junction boxes IP/IP with increased safety «e» for hazardous areas (ATEX), comply with BECMA international standard. MAIN FEATURES Maximum voltage a.c. 0 V Ambient temperature 0 C to +0 C Protection mode e Protection IP/IP ATEX zones &, & Dimensions (H x L x P) x x mm This box can be equipped with: Two DXN with 0 inclined sleeve, or One DXN and one DXN with 0 inclined sleeves. Standards compliance The European ATEX //CE Directive IEC EN 000, IEC EN 00 and IEC EN 00 Junction Three kinds of increased safety e terminal blocks are available: 0 A : x mm max. per terminal block 0 A : x 0 mm max. per terminal block 0 A : x mm max. per terminal block Boxes fitted with terminals only MARECHAL ELECTRIC MAROMME II G D Ex e II td A 0 C Ta +0 C T T C LCIE 0 ATEX Boxes fitted with terminals + DXN MARECHAL ELECTRIC MAROMME II G D Ex e II td A 0 C Ta +0 C T T0 C LCIE 0 ATEX (one M0 cable gland maximum per side) 0 Catalog International Version

6 BX 0 Catalog International Version

7 A WIDE RANGE OF TECHNOLOGICALLY ADVANCED PRODUCTS SAFETY OF PEOPLE EQUIPMENT AND INFRASTRUCTURE IN POTENTIALLY EXPLOSIVE ATMOSPHERE TECHNOR is a worldwide technology company of MARECHAL ELECTRIC GROUP, with operational businesses in Italy, United Arab Emirates and Singapore. TECHNOR has a high level of experience in developing and designing Ex equipment for most applications. The company main markets are within Oil & Gas and Petrochemical Industries. Products enable safe transport and application of electric signals and power in potentially explosive atmospheres. The core business is in the electrical, instrumentation and electronics fields. All the equipment for use in explosive atmosphere satisfy the requirements of international and national regulations (Atex, IECEx and TR CU (GOST) and each individual systems component is certified in accordance with specific Excertification requirements. LIGHTING RMS SERIES IP/IP, ExnA, Exde Fluorescent Lights EVFP Exde, Exem Fluorescent Lights Ideal for Onshore and Offshore, Marine applications and for all kinds of industry where a high level of corrosion resistance is required. Stainless steel AISI0 or AISIL body, glass tempered window and glassframe done in one unit without welding. Fluorescent luminaries manufactured with cylindrical polycarbonate lamp housing and two endcups in Copper free aluminium. The high resistance polycarbonate light housing is made of different layers extrusion with UV filter to grant the best possible protection against direct sun heating and radiation effects. Shape has been designed to minimize wind resistance. Suitable for marine enviroment conditions. EVde Exde, Discharge Lighting Fixtures FL Exde, Discharge Floodlights Range of buit in control gear HID lighting fixtures, for general lighting applications, providing Exe junction box, adjustable SS AISI 0 mounting bracket suitable for universal installation, facilitate mounting and maintenance. Compact design in aluminium grade body, for onshore and offshore applications. HID floodlight, for general lighting application, platform installation, cranes, providing integral looping facility Exe junction box, stainless steel adjustable fixing bracket, built in ballast, internal anti condensation paint, compact design in aluminum grade body as well as stainless steel, for onshore and offshore installation. 0 Catalog International Version

8 TECHNOR FLAMEPROOF ENCLOSURES JUNCTION BOXES GUB, EJB Exd IIB, IIB+H and IIC Enclosure AQAR Exe and Exia Enclosure Large range of enclosures manufactured in Copper free aluminium, Cast Iron or Stainless steel. Ideal for instrument housing, control, check, connection, automation, interruption and/or protection use. They can be equipped with pushbuttons, pilot lamps and selector switches. Enclosures can be customized project by project to get control panel, lighting distribution boards, heat tracing distribution boards, motor starters, as well as, assembled together, or mounted on a self supporting frame, generate switchrack for onshore and offshore applications. The AQ/AR range of stainless steel AISIL enclosure used as instrument and electrical terminal boxes, as well as control panels equipped with push button and switches, all designed for use in any environment where an explosive atmosphere may be present and are especially recommended for chemical agent environments, seawater corrosion resistance and extremis of low and high temperature, offshore and onshore oriented. CONTROL STATIONS VISUAL SIGNALCABLE GLANDS & ACCESSORIES CP /EF Exd, Exe, Exde, AWL SERIES EVde Exd, P, Exdem Control Station Exde IIC Warning Lights Exd/e Cable Glands Range of GRP, Copper free aluminium or Stainless Steel control stations designed to offer a flexible, light weight and cost effective solution tailor made upon customer request. To be assembled with Exde operators in case EF.. Exde version and with PL.. operators in case of CP.. Exd version. The top of technology among Aircraft Warning Lights, LIOL, MIOL with LED technology, reliable long life and maintenance saving products, in compliance with ICAO and FAA, along with signalization unit like beacons, flashing unit, rotating light. Single seal, double seals cable glands, suitable for unarmored and armored cables. Nickelchrome plated brass, stainless steel and aluminum made, hexagon shape, antiageing EPDM oil resistant gaskets. These cable glands are used in classified Area Zone & and Zone &. 0 Catalog International Version