RS232 & RS449 Compatible

Transcription

1 Press 89 Series D Sub.109" x " Grid SPIFITIONS RS232 & RS449 ompatible Press D-Subminiature connectors are preassembled for easy one-step assembly to the board. ontacts are individually removable and replaceable through the insulator. For the socket connector, the upper molding must be removed before contacts can be removed or replaced. The upper moldings snaps back into place. Insulators are removable and replaceable without disturbing the contacts. This connector offers all the advantages of an INSULTORS Material: olor: Insulation Resistance: Operating Temperature: Polyester thermoplastic glass reinforced, UL rated 94 V-O Natural 5,000 Megohms (min.) -55 to +105 I P.. mount connector with the added feature of solderless press-fit Press contacts. The socket connector is the closed entry type to avoid misalignment when mating. oth the pin and socket versions come in sizes 9, 15, 25 and 37 positions. Threaded standoffs and inserts are available. These connectors meet industry standards as defined by RS232 and RS449. ONTTS Material: opper lloy 725 Plating: Selective plating. See Plating hart urrent Rating: 1 amp at 70 3 amps at 20 Insertion Force (ompliant rea): 40 lbs. or less, individual pin Retention Force (ompliant rea): 10 lb minimum, individual pin RMOVL LOSD NTRY OVR Recognized under the omponent Program of Underwriters Laboratories Inc. File No , to Standard UL 1863 Press D-Sub Socket onnector Socket Insulator Individual contacts can be removed and replaced with a simple hand tool. See page P/51 for tool part numbers. 62 arnes Industrial Road North, Wallingford, T Phone: (203) FX: (203) P /23

2 Press 89 Series D Sub.109" x Grid OUTLIN Pin S Y equal S = Ref. Z equal 109 S = D Ref. See chart for thread size (2 places) Ref Socket Z equal 109 S = D Ref S Y equal 109 S = Ref. See chart for thread size (2 places) Ref DIMNSIONS atalog No S P S P S P S P (31.04) (39.37) (53.09) (69.54).984 (24.99) (33.32) (47.04) (63.50).327 (8.30).654 (16.61) (30.45) (47.07) D.436 (11.07).763 (19.38) (33.22) (49.83).640 (16.26).666 (16.92).968 (24.59).994 (25.25) (38.30) (38.96) (54.76) (55.42) F (3.45) #4-40 UN Thread Only F (2.69) #2-56 UN Thread Only Y Z arnes Industrial Road North, Wallingford, T Phone: (203) FX: (203) P /24

3 Press 89 Series D Sub.109" x Grid KPNL RQUIRMNTS Hole pattern Z equal 109 Typ. Y equal Typ. Finished plated thru hole size.040 ±.003 Dia. Typ ± 0.08 F Dia. (2 Holes) D R R.004 Hole Size & Plating - Standard Press : Winchester illustration on page P/4. ORDRING INFORMTION NOT: onsult for Press applications for backpanels less than.093" thick and for bare copper plated through holes S / P 1 Step 1 Series ode: 89 Step 2 Grid Pattern: 11 =.109" x " Step 3 No. of ontacts: 09, 15, 25, 37 Step 4 Insulator: S = Socket P = Pin Step 5 Latch Options: 1 = without latches Step 6 ushing Thread Size: 0 =.168 dia. thru hole 1 = #4-40 UN standoff 2 = #2-56 UN standoff 3 = #4-40 UN insert 4 = #2-56 UN insert Step 7 Plating: D = u selective plating over Ni on contact area. right solder on -section. For additional plating, consult sales department. Step 8 olor: lank = White 4338 = lack 62 arnes Industrial Road North, Wallingford, T Phone: (203) FX: (203) P /25

4 Press 189 Series D Sub Shielded /.109" x " Grid SPIFITIONS OUTLIN Pin.490 ± ± offers you a D-Subminiature pin and socket connector with metal shielding to meet your F requirements on MI, SD and RFI. With these solderless Press contacts, input/ output lines can be brought directly to any location on the P.. backpanel. These connectors meet industry standards as defined by RS232 and RS449. s with other D-Sub connectors, they are pre-assembled and contacts INSULTORS Material: olor: Shield: Insulation Resistance: Operating Temperature: Polyester thermoplastic glass reinforced, UL rated 94 V-O lack Tin plated steel 5,000 Megohms (min.) -55 to +105 Recognized under the omponent Program of Underwriters Laboratories Inc. File No , to Standard UL 1863 Mounting Option (See code ordering chart) Socket are individually removable and replaceable through the insulator. Upper molding on socket connector snaps easily back into place. These Press Series 189 connectors can be specified with 9, 15, 25, and 37 contact positions. The socket connector is the closed entry type to avoid misalignment when mating. Hardware options include threaded inserts, threaded standoffs, grounded standoffs, and a quick latch system. Ground straps are also available. ONTTS Material: Pin - opper lloy 725 Socket - eryllium opper Plating: Selective plating. See Ordering hart urrent Rating: 1 amp at 70 3 amps at 20 Insertion Force (ompliant rea): 40 lbs. or less, individual pin Retention Force (ompliant rea): 10 lb. minimum, individual pin F Z equal = D Ref. Mounting Option (See code ordering chart).490 ± ± 0.38 F.109 Typ. Z equal = D Ref Ref..109 Typ DIMNSIONS.287 ± ± 0.20 Typ..018 ± ± ± ± 0.20 Typ..018 ± ± Ref.. P /26 atalog No. ±.006 D F±.015 Y Z S (16.33) (31.04) (24.99) (8.30) (11.07).666 (30.81) P (16.92) S P S P S P (24.66) (39.37) (33.32) (16.61) (19.38).994 (39.14) (25.25) (38.38) (53.09) (47.04) (30.45) (33.22) (53.04) (38.96) (54.84) (69.54) (63.50) (47.07) (49.83) (69.32) (55.42) 62 arnes Industrial Road North, Wallingford, T Phone: (203) FX: (203)

5 Press 189 Series D Sub Shielded.109" x " Grid KPNL RQUIRMNTS Hole pattern Hole Size & Plating - Standard Press : Winchester illustration on page P/4. Z equal Y equal D.109 = Typ..109 = Typ..040 ±.003 Dia. Typ ± Dia. 2 Holes NOT: onsult for Press applications for backpanels less than.093" thick and for bare copper plated through holes. Mounting Options #4-40 or M3 Latch #4-40 or #2-56 Standoff ushing Dia Min Min. #4-40 or #2-56 Insert ORDRING INFORMTION S / P Step 1 Series ode: 189 Step 2 Grid Pattern: 11 =.109" x " Step 3 No. of ontacts: 09, 15, 25, 37 Step 4 Insulator: S = Socket P = Pin Step 5 Mounting Options: 0 =.125" dia. thru holes 1 = #4-40 thru latch 2 = M3-0.5 thru latch 3 = #4-40 standoff 4 = #2-56 standoff 5 = #4-40 insert 6 = #2-56 insert 7 = Ground straps with thru holes (-4514 only) 8 = #4-40 ground standoff 9 = #2-56 ground standoff 10 =.168 dia. thru holes 11 = M-3 insert 12 = M-3 ground latch 13 = M-3 ground standoff Step 6 Plating: D = u selective plating over Ni on contact area. right solder on -section. For additional plating, consult sales department. Step 7 Grounding Strap: 4514 = With 4338 = Without 62 arnes Industrial Road North, Wallingford, T Phone: (203) FX: (203) P /27