GIFF a. s. Frýdlant nad Ostravicí Custom foundry of grey and modular iron castings. The long tradition of foundry industry

Transcription

1 GIFF a. s. Frýdlant nad Ostravicí Custom foundry of grey and modular iron castings The long tradition of foundry industry

2 Director of foundry : Ludk Vrubl Firm domicile : Frýdlant nad Ostravicí, Czech republic Foundry sales : tons Batch production and production in large series to syntetical bentonic mixture up to accuracy class GTB 16 We are member of Czech Foundry Association Product - for industries - for electrotechnics - for building industry

3 Ludk VRUBL deputy for business Tomáš FARNÝ deputy for technology Miroslav OR deputy for production Jaroslav HEROT deputy for estate administration Petr BOO deputy for economics Inland : (vladimir.kanok@giff.cz) Outland :! (dasa.paprokova@giff.cz) Invoicing :! (ivana.vrublova@giff.cz) "! (radka.zidkova@giff.cz) Purchase :# $! (bretislav.uhlar@giff.cz) % &!! (alice.ondrackova@giff.cz)

4 ' We are a custom foundry of grey cast iron and modular iron castings. We use the most modern accessible technologies in the market for the production of the castings. Our equipment electrical induction furnaces automatic moulding lines sand preparation plant controled by computer half-automated core machines manipulator for servicing air-blast machines and separation intakes modern dust exhaust and recuperation foundry machining laboratory and section of quality pattern shop

5 ' Melting is provided in the twin middfrequence furnace by EGES with the capacity 2x6 tons. The furnaces are equipped with efficient system of catching of solid emissions produced by BMD GARANT. We cast grey iron in qualities GG-15 to GG-25. GG-25 only under the higher volume of the commission. We produce modular iron castings mainly in GGG-50 as well. Original furnaces are staying as reserve melting equipment(as a security of confirmed supplies to the customers).

6 ( In the foundry are casted machine moulded castings into synthetic bentonite mixtures, about weight from 1kg to 100kg. The moulding production runs on two automatic moulding lines, whose moulding machines come from German company Heinrich Wagner Sinto with the sign HSP-3D and FBO-4. Both lines make possible to set up cores into the mouldings. Moulding line FBO-4 - it means modern frameless moulding line with horizontal mould parting with capacity 100 mouldings per hour. Mould dimensions 700x600x / mm. Frame moulding line HSP-3D moulding runs on the principle of blowing by pressed air thanks to SEIATSU valves with the following finish-pressing. The moulding frames 850x850x200/200 mm are used by moulding on this line with the possibility of increasing of the semimoulding with 50 mm. The productivity of the line has been designed for 50 mouldings per hour.

7 ' The moulding mixture for both lines is prepared in a new sand preparing plant equipped with a modern turbine mixer MTI-2500 by TECHNICAL with automatic regulated process of water proportioning from company MICHENFELDER and continuous fluidized cooler of returnable mixture ALEX06 by TECHKON. Everything is managed by computer.

8 ' We use COLD-BOX technology for the production of the cores. The core mixture is prepared on the continuous mixer T36/3 from IMF company, Italy equipped with the RESOL technology with hardening by means of CO2. We have been equipped with the automatic core machine BICOR-ROTO 4 and BICOR-DISCO 4, with the volume of shooting of core mixture up to 16 litres. On these machines we can produce cores on 4 various core boxes at the same time. The core shop has been expanded with the Röper 40 with volume of shooting of core mixture up to 40 litres. Röper 40 has been determined for the production of circuit cores for the shield of electromotors and similar cores.

9 According to the requirement of the customers we deliver the castings just grinded or painted in synthetic red color. We are able to ensure other surface finishing as well, such as coating powder in various color shades or hot-dip galvanizing. By request of the customers we can offer the machining (lathe turning, milling, boring, etc.) both on conventional and on NC and CNC machines.

10 ) GIFF a. s. has established the large range of arrangements to reach the high level of quality of its products. Company has been certificated according to the norm ISO 9001:2008 (it means the guarantee of the quality of working out of technological procedures and complying with all procedures related with quality of final product). Quality of the iron has been continuously checked by analysator THERMO.

11 ) Quality of the iron has been checked by spectrometer LECO GDS 750. During matallographical analysis we use microscope OLYMPUS PME3. Fastness test is realized on the ripper. Measurement and checking of the machine castings are made on the apparatus Crysta Apex from company Mitutoyo of high quality.

12 Qualified workers produce the model equipment from the materials required by the customers. It means these materials wood, cast resin, aluminium and steel (according to the requirement of the customer and volume of the contract). The maintenance of the model equipment in the possession of the customer has been provided. Technical documentation for the pattern production is accepted as classic drawings or in electronical version. In case of delivery of drawings of 3D we are able to ensure to the production of pattern in the term 1 month.

13 We deliver casting packs on euro pallets or on the customer's pallets. We ensure protection packed with the plastic shrink foil. We are ready to provide the transport to the customer.

14 * We understand problems related with the pollution of the enviroment, that is why realize arrangement oriented to its protection in our area. we have realized the change of melting procedure by changing from cupola to electrical furnaces with dry dust exhausing the change of wet dust exhausting of the finishing operations to dry filtres removing of volatile components from syntetic paints (recuperation unit) reducing noisiness of the air filtration preparation of using of waste heat from the melting procedure

15 + Company invests into better working environment and services for its employees. We support our employees in their sports activities. More comfortable feeding of employees has been ensured by building new canteen. We have realized the large reconstruction of dressing-room and washing room. We have supported our employees and inhabitants of the town in their sport activities and we have signed the contract with the municipality Frýdlant nad Ostravicí about mutual cooperation. GIFF a. s. company has become the main sponsor of sports and relaxing centre.

16 GIFF a. s. Slévárenská Frýdlant nad Ostravicí telefon: fax: