DEPARTMENT OF MECHANICAL ENGINEERING STUDENT CONFERENCE

Transcription

1 DEPARTMENT OF MECHANICAL ENGINEERING STUDENT CONFERENCE SI.NO TITLE PUBLICATION DETAILS YEAR G.Hemath kumar,",ramesh Babu R.Sagar and H.Mohit",Abrasive wear behavior of Aluminum based metal matrix composite for automotive parts,,"proceeding of the International Con ference of Emerging Research and Advances in Mechanical Engineering, (ERA 2009)",J-Gate,2009 G.Hemath kumar,r.sagar and H.Mohit",Characterizing Friction and Wear Behavior of Al-SiCp Composite,,"Proceeding of conference-16th ISME at Indian Institute of Technology, Delhi (ISME2010)",Google scholar,2010 S.Muthukumar,Mohit.H,Design and development of composite cutting - off wheel,national Conference,Proceedings of National level conferences Recent Developments in Mechanical and Civil Engineering, RDMCE- 2010,Google scholar,2010 G.Hemath Kumar, S.Muthukumar, R. Sagar & H.Mohit,"Design and development of micro wear testing machine for research area at Indian Institute of Technology, New Delhi, India",National Conference,Proceeding of 16th ISME National Conference of Mechanical Engineering (ISME-2010),Google scholar,2010 G.Hemath Kumar, S.Muthukumar, R.Sagar and H.Mohit,Development of Aluminum based metal matrix composite for automotive parts and its properties,national,proceeding of 16th ISME National Conference of Mechanical Engineering (ISME-2010),Google scholar,2010 S. Muthukumar, G.Hemath kumar and H. Mohit, Wear testing characteristics of Nano composites, International Conference,International Journal of Applied Bio Engineering," ISSN : , Google scholar ", January 2011 S.Muthu Kumar, G.Hemath kumar and H.Mohit ",Wear testing of Nano- Alumina-Zirconia Ceramic Matrix Composites,International Conference,"Proceedings of International Conference on Nano-science, Engineering & Technology (ICONSET-2011)" IEEE Explore,ISBN: ,2011 International Conference 2009 National Conference 2010 National Conference 2010 National Conference 2010 National Conference 2010 International Conference 2011 International Conference G.Hemath kumar,n.dilip Raja and H.Mohit ",A Novel Pin-on-Drum wear testing Machine for Research Area,,Proceedings of National Conference (ERA2011),"ISBN: , Google scholar ",2011 National Conference S.Muthukumar, H.Mohit,Micro Structure Characterization of Composite materials using Scanning Electron Microscope,National Conference,"Proceedings of National Conference for students on Design, Materials& construction, (NCDMC-2011)","ISBN: , Google scholar ", August 2011 National Conference 2011

2 S.Lakshmanan,A.S.Vijay Prabu,Influence of chromium Nitride coating deposited by cathodic arc deposition on AISI 420 steel,international conference,rmdce,2011 S.T.Selvamani,"K. Umanath,K. Palanikumar K.Vigneshwar, B.T. Sivakumaar, Sensitivity Analysis of Friction Welded AISI1035 Grade Carbon Steel Rods,International,AETAME,Google Scholar,2013 S.Lakshmanan,A.S.Vijay Prabu and P.Shiva, Experimental Investigation of Thermal Barrier Coating on I.C Engine Piston,International conference,rmdce,,2013 International conference 2011 International Conference 2013 International conference S.Palani,Y.Kesavanarayana, V.Muthukararuppaiah and S.Bharathkumar, Intelligent secured E-Manufacturing and E-Diagnostics systems, National Conference, Proceedings of National conference on advancement in Mechanical Engineering (NCAME),Google scholar, September S.Palani,Mohanakrishna, Lokeshwaran.B and Rahul.V, Design and modal analysis of composite propeller shaft for automotive application, National Conference, Proceedings of National conference on advancement in Mechanical Engineering (NCAME),Google scholar, September 15. S.Palani, C.Balaji Iyyanar, B.Prasanth and C.Ranjith", Design and fabrication of speed breaker power generation system, National Conference,Proceedings of National conference on advancement in Mechanical Engineering (NCAME),Google scholar, September 16. S.Palani,S.Muthukumar Kesavanarayana, Y", Prediction of surface roughness in end milling process by machine vision using neuron fuzzy network, International Conference, Proceedings of IEEE conference,"isbn: , SCOPUS, November National Conference National conference National Conference International Conference S.T.Selvamani,K. Umanath,,K. Palanikumar and K.Vigneshwar,Developing a Mathematical Model to Predict Tensile Properties of Friction Welded AISI 1035 Grade Steel Rods,International,Advanced Materials Research Journal,"ISSN: ,SCOPUS", S.T.Selvamani,"K. Umanath,K. Palanikumar,K.Vigneshwar, Sundeep kumar Ghosh, Analysis of AISI1035 Grade joints welded frictionally with varying forging pressure,international,applied Mechanics and Materials,"ISSN: , SCOPUS", International Conference International Conference S.T.Selvamani,"K. Umanath, K. palanikumar and K.Vigneshwar, ",Developing empirical relationship to predict tensile properties of friction welded AISI grade steel rods,international,applied Mechanics and Materials,"ISSN: , SCOPUS", S.T.Selvamani, K.Palanikumar, V.Balasubramaniam, S.Divagar M.Vigneshwar, Establishing The Relationship Between Friction Welding Parameters And Properties Of Fully Deformed Zone (FDZ) Of Aerospace Steel Autogeneous Joints,International Conference On Advances In Mechanical Engineering, University College Of Engineering, Villupuram, India, Vol-2, pp ,isbn: International Conference International Conference 2015

3 M.Vigneshwar, S.Divagar,S.T.Selvamani, Influence Of Dual Nano Particles On High Strength Aircraft Aluminum Metal Matrix Nanocomposites Produced By Stir Casting Method, International Conference On Recent Advancements In Materials (ICRAM-15), Anna university-bit Campus, Tiruchirappalli, India, pp.7, ISBN: S.T.Selvamani, K.Palanikumar, K. Shanmugam, S.Divagar, M. Vigneshwar, The relationship between tensile and fatigue strength of friction welded steel joint, International Mechanical Engineering Congress & Exposition ASME, USA. IMECE M.Vigneshwar, S.Divagar, S.T.Selvamani, Microhardness Analysis on Nano Metal Matrix Composite (AA7075+SiC10% + Al2O3 5%) Produced By Stir Casting Method For Aerospace Application, One Day National Conference On Nanomaterials And Their Applications, Government College Of Technology, Coimbatore, (NCNMA-15) July.(2015) N.Dilip Raja, R.Velu, S.Divagar, M.Vigneshwar, S.T.Selvamani. Analysis on Friction Stir Welded Metal Matrix Composite Produced by Stir Casting Method, NCDMC 15, Vel Tech Dr.RR Dr.SR Technical University, Chennai, ISBN: , 08/2015 S. Divagar, M.Vigneshwar, V.Vijayakumar, S.T.Selvamani. Comparative Analysis of MIG and Friction Stir Welded AA1050 H24 Grade Aluminum Alloy, National Conference On Design, Materials &Constructions (NCDMC 15) Vel Tech Dr.RR Dr.SR Technical University, Chennai, ISBN: , 08/2015 International Conference 2015 International Conference S.Divagar, M.Vigneshwar and S.T.Selvamani. Fabrication of AA7075 Aluminum Based Metal Matrix Nano Composite produced by Stir Casting, NCDMC 15, Vel Tech Dr.RR Dr.SR Technical University, Chennai, ISBN: , 08/2015 M.Vigneshwar, S.Divagar, P.S. Harisudhan, V.Mariselvam and S.T.Selvamani. Flexural Test on Glass, Sisal, Kenaf Fiber Composite Material Produced By Hand Layup Method, NCDMC 15, Vel Tech Dr.RR Dr.SR Technical University, ISBN: , Chennai, 08/ S.Hariharan, M.Vigneshwar, S.Divagar, and S.T.Selvamani. Predicting the Feasible working limits to optimize the friction welding parameters by trail test, NCDMC 15, Vel Tech Dr.RR Dr.SR Technical University, Chennai, ISBN: , 08/ M.Vigneshwar, S.Divagar, P. Santhosh kumar and S.T.Selvamani. Microhardness analysis of TIG welded AA7075 Aluminium Alloy, NCDMC 15, Vel Tech Dr.RR Dr.SR Technical University, Chennai, ISBN: , 08/2015.

4 30. S.Divagar, M.Vigneshwar, P. Govindharaj, R. Vishnu and S.T.Selvamani. Influence of Transverse Speed on Advancing and Retreating sides of Friction Stir Welded AA6061 grade Aluminum alloy, NCDMC 15, Vel Tech Dr.RR Dr.SR Technical University, Chennai, ISBN: , 08/ Divagar, M.Vigneshwar S.Hariharan, and S.T.Selvamani Heterogeneity of Tensile Properties on Aluminum Based Dual Particles In-Situ Metal Matrix Nano Composites for Aerospace Application. National conference on Trends & Innovations in Civil & Mechanical ('NCTICM'2k15''), Vel Tech Multi Tech Engg College, Chennai, ISBN: , pp , 09/2015. M.Vigneshwar, S.Divagar, R Govindharaj, S.T.Selvamani, Some Experimental studies on Feasible Working Limits of Friction Welded AA6061 Grade Aluminum Alloy, National conference on Trends & Innovations in Civil & Mechanical ('NCTICM'2k15''), Vel Tech Multi Tech Engg College, Chennai, ISBN : , pp , 09/2015. T.Moorthy, M.Vigneshwar, S.Divagar, S.T.Selvamani, Performance and Emission Evaluation of VCR Diesel Engine Using Mahua Oil Methyl Ester, National conference on Trends & Innovations in Civil & Mechanical ('NCTICM'2k15''), Vel Tech Multi Tech Engg College, Chennai, ISBN: , pp , 09/ S.Divagar, S.T.Selvamani, M.Vigneshwar D.Venkatesh, V.Vijayakumar, An Experimental Study on Tensile Behavior of Gas Tungsten Arc Welded (GTAW) AA7075-T651 Grade Aluminum Alloy Joints, National conference on Trends & Innovations in Civil & Mechanical ('NCTICM'2k15''),Vel Tech Multi Tech Engg College, Chennai, ISBN : , pp , 09/2015. M.Vigneshwar, S.T.Selvamani,S.Divagar, P. Santhosh kumar, J.Ashok kumar, Evaluation of Micro Hardness on Gas Metal Arc Welded (GMAW) High Strength Aircraft Aluminum Alloy joints, National conference on Trends & Innovations in Civil & Mechanical ('NCTICM'2k15''), Vel Tech Multi Tech Engg College, Chennai, ISBN : , pp , 09/2015. N.Dilip Raja, R.Velu, S.T.Selvamani. M.Vigneshwar, S.Divagar, Analysis of Defects in Friction Stir Welded Metal Matrix Composite (AA % wt SiCp) National conference on Trends & Innovations in Civil & Mechanical, ('NCTICM'2k15''), Vel Tech Multi Tech Engg College, Chennai, ISBN: , pp , 09/2015. S.T.Selvamani, K.Palanikumar, K.Shanmugam, S.Divagar, M. Vigneshwar, 2015, The relationship between tensile and fatigue strength of friction welded steel joint,asme-journal, USA. IMECE Accepted for Publication. International Conference 2015

5 DEPARTMENT OF MECHANICAL ENGINEERING STUDENT JOURNAL SI.NO TITLE PUBLICATION DETAILS YEAR S. Muthukumar, G.Hemath kumar and H. Mohit, Wear testing characteristics of Nano composites, International Conference,International Journal of Applied Bio Engineering," ISSN : , Google scholar ", January 2011 G.Hemath kumar,s.muthukumar H.Mohit and A.Aravindan",Converting technology for development of hole making Technique during thermoforming on plastic sheets,,indian Journal of Technical Education,J- Gate,2011 International Journal of Applied Bio Engineering Indian Journal of Technical Education S.Lakshmanan,. G. Ranjith Babu,S.Kural kaaviyan,m. Manikandan,A.Manigandan,, Deposition and charateration of chromium nitride coating on aisi 420 steel,international journal, IAETSD,,2011 Journal of Science and Innovative Engineering & Technology S.T.Selvamani,K. Umanath,,K. Palanikumar and K.Vigneshwar,Developing a Mathematical Model to Predict Tensile Properties of Friction Welded AISI 1035 Grade Steel Rods,International,Advanced Materials Research Journal,"ISSN: ,SCOPUS", S.T.Selvamani,"K. Umanath,K. Palanikumar and K.Vigneshwar",The Microhardness Analysis of Friction Welded AISI Grade Carbon Steel Joints,International,Advanced Materials Research Journal,"ISSN: , SCOPUS", S.T.Selvamani,"K. Umanath,K. Palanikumar,K.Vigneshwar, Sundeep kumar Ghosh, Analysis of AISI1035 Grade joints welded frictionally with varying forging pressure,international,applied Mechanics and Materials,"ISSN: , SCOPUS", International,Advanced Materials Research Journal International,Advanced Materials Research Journal International,Applied Mechanics and Materials S.T.Selvamani,"K. Umanath, K. palanikumar and K.Vigneshwar, ",Developing empirical relationship to predict tensile properties of friction welded AISI grade steel rods,international,applied Mechanics and Materials,"ISSN: , SCOPUS", Shyam.C, Saravana Muthu.K Santhosh.P, S.Lakshmanan,",Versatile Bicycle,International,"International Journal of Engineering Technology, Management and Applied Sciences",ISSN 2349, S.Lakshmanan,Shyam.C, Experimental work on Versatile Bicycle,National Journal,IJRASET,, Palani S, Ohmnath B, Selvam M, Raghunath H, Manikandan K Productivity Improvement in Small Medium Enterprise by Plant Relocating through line balancing Technique International Journal of Applied Engineering Research, ISSN Vol. 10 No.83 (2015), PP: Palani.S, JohnstephenR, Logesh.H, Selvam M, Kaushik Manda Design and development of JIG for Making Anchor Head in three Axis IInternational Journals International Journal of Engineering Technology, Management and Applied Sciences National Journal

6 Vertical Milling Machine International Journal of Applied Engineering Research, ISSN Vol. 10 No.83 (2015), PP: Selvam M, Ganapathy srinivasan R, Palani S, Daniel Charles J, Kesavan, Investigation of Glass Fiber Reinforced Plastic with Aluminium using Finite Element Method for Automotive Applications, International Journal of Applied Engineering Research, ISSN Vol. 10 No.83 (2015), PP: Palani S, H.Raghumath, "Plant relocating and productivity improvement through line balancing", National Conference Trends and Innovation in Civil and Mechanical Engineering 2015 (NCTICM2k'15), 26th September 2015 at Vel Tech Multitech, Avadi, Chennai M.Vigneshwar, S.Divagar, S.T.Selvamani, The Micro hardness Behavior of Metal Matrix Nano Composites for Aerospace Application., International Journal of Applied Engineering Research, ISSN: Vol. 10 No.67 (2015). S.T. Selvamani, S. Divagar, M. Vigneshwar, "Application of Response Surface Methodology (RSM) in Friction Welding AISI 1020 Grade Steel Joints", International Journal of Engineering Research in Africa, Vol. 16, pp , Jun V.Mariselvam, S.T.Selvamani, S.Divagar, M.Vigneshwar, M.Jebaraj. Tensile Strength Evaluation on Glass and Sisal Fiber Types of Composites Material, Journal of Chemical and Pharmaceutical Sciences,pp-3-5,2015 ISSN: S.Divagar, S.Hariharan M.Vigneshwar and S.T.Selvamani Heterogeneity of Tensile Properties on Aluminum Based Dual Particles In-Situ Metal Matrix Nano Composites for Aerospace Application, International Journal of Applied Engineering Research, ISSN: , Vol. 10 No.83, pp , (2015) 18. M.Vigneshwar, S.Divagar, R Govindharaj S.T.Selvamani, Some Experimental studies on Feasible Working Limits of Friction Welded AA6061 Grade Aluminum Alloy, International Journal of Applied Engineering Research, ISSN: , Vol. 10 No.83, pp , (2015). 19. T.Moorthy, M.Vigneshwar, S.Divagar, S.T.Selvamani, Performance and Emission Evaluation of VCR Diesel Engine Using Mahua Oil Methyl Ester, International Journal of Applied Engineering Research, ISSN: , Vol. 10 No.83, pp , (2015). 20. S.Divagar, M.Vigneshwar and S.T.Selvamani An Experimental Study on Tensile Behavior of Gas Tungsten Arc Welded (GTAW) AA7075-T651 Grade Aluminum Alloy Joints, International Journal of Applied Engineering Research, ISSN: , Vol. 10 No.83, pp.61-66, (2015).

7 21. M.Vigneshwar, S.Divagar, S.T.Selvamani, Evaluation of Micro Hardness on Gas Metal Arc Welded (GMAW) High Strength Aircraft Aluminum Alloy joints, International Journal of Applied Engineering Research, ISSN: , Vol. 10 No.83, pp , (2015). 22. N.Dilip Raja, R.Velu, S.T.Selvamani. M.Vigneshwar, S.Divagar, Analysis of Defects in Friction Stir Welded Metal Matrix Composite (AA % wt SiCp), International Journal of Applied Engineering Research, ISSN: , Vol. 10 No.83, pp , (2015). 23. N.Dilip Raja, R.Velu, S.Divagar, M.Vigneshwar, S.T.Selvamani. Analysis on Friction Stir Welded Metal Matrix Composite Produced by Stir Casting Method, International Journal of Applied Engineering Research, ISSN: S.Divagar, M.Vigneshwar, V.Vijayakumar, S.T.Selvamani. Comparative Analysis of MIG and Friction Stir Welded AA1050 H24 Grade Aluminum Alloy, International Journal of Applied Engineering Research, ISSN: S.Divagar, M.Vigneshwar and S.T.Selvamani. Fabrication of AA7075 Aluminum Based Metal Matrix Nano Composite produced by Stir Casting, International Journal of Applied Engineering Research, ISSN: M.Vigneshwar, S.Divagar, P.S. Harisudhan, V.Mariselvam and S.T.Selvamani. Flexural Test on Glass, Sisal, Kenaf Fiber Composite Material Produced By Hand Layup Method, International Journal of Applied Engineering Research, ISSN: S.Hariharan, M.Vigneshwar, S.Divagar, and S.T.Selvamani. Predicting the Feasible working limits to optimize the friction welding parameters by trail test, International Journal of Applied Engineering Research, ISSN: M.Vigneshwar, S.Divagar, P. Santhosh kumar and S.T.Selvamani. Microhardness analysis of TIG welded AA7075 Aluminium Alloy, International Journal of Applied Engineering Research, ISSN:

8 29. S.T.Selvamani, M.Vigneshwar, S.Divagar, Effects of Heat Transfer on Microhardness and Microstructure of Friction Stir Welded AA 6061 Aluminum Alloy, International Journal of Engineering Research in Africa, ISBN: , Accepted S.T.Selvamani,M.Vigneshwar, S.Divagar, Establishing the Relationship between Fatigue and Tensile Strength of Frictionally Joined Metal Matrix Nanocomposite Autogeneous Joints for aerospace Transactions of the Indian Institute of Metals.ISSN: , Vishnu N, Sudesh N I, Sivachandran M, Thamarai Selvan A, Design And Analysis Of A Go-Kart, International Journal of Applied Engineering Research (2015)