PFA (Fluororesin) coated temperature sensors

Size: px
Start display at page:

Download "PFA (Fluororesin) coated temperature sensors"

Transcription

1 PFA (Fluororesin) coated sensors FT-100 () FR-100 (Resistance Temperature Detecr) Temperature sensor with perfluoroalkoxy polymer resin coating (PFA) excels in chemical and moisture resistance. Measuring Point Measuring Point : FT-100 Resistance Temperature Detecr : FR-100 FT-100 () K, Class 1 Measuring range 0 200ºC Do not condensate except for the protection tube Measuring accuracy (Iersion length : 100 or more) Protection tube material PFA (fluororesin) Acceptable radius for protection tube bending 15 (Except 90 from tip) Lead wire diameter Lead wire configure 3.2 X 1 Lead coating material PFA (fluororesin), Green FR-100 (Resistance Temperature Detecr) Pt100, 3-wire system, Class A Measuring range 0 200ºC Do not condensate except for the protection tube ±( t ) C (t:measuring ) Measuring accuracy Specified current : 2mA (Iersion length : 100 or more) Protection tube material PFA (fluororesin) Lead wire diameter 1.7 Lead wire configure 0.1 X 7 Lead coating material PFA (fluororesin), Gray Application Cleaning Chemicals sensor Gas Exhaust Pipe sensor Battery electrolyte sensor Chemical liquid supplying device Environmental test chambers Thermal reaction sensor sensor 55

2 PFA (Fluororesin) coated sensors External Dimensions FT-100 Unit : FT-100 () FR-100 (Resistance Temperature Detecr) Max Protection tube =250 (*1) Lead wire L2= 9000 (*1) (PFA filling) (4) 18 (PFA filling) 15 (PFA filling) 80 (1.0X1.6) o terminal lugs (Terminal soldered) +(Green) Resistance Temperature Detecr FR Protection tube (PFA) PFA coating lead wire (0.32/1X2) *1: Total lead length of the protection tube length can be manufactured in (10m) below. Specification label +(Green) - (White) +(Green) - (White) Max Protection tube =250 (*1) Lead wire L2= 9000 (*1) 15 (PFA filling) - (White) (Red) (Black) (Red) (Black) Spade lugs Ring lugs 12 (PFA filling) 15 (PFA filling) A(Red) B(White) B(White) Protection tube (PFA) *1: Total lead length of the protection tube length can be manufactured in (10m) below. Specification label o terminal lugs (Terminal soldered) PFA coating lead wire (0.1/7 3) Model Code FT-100 Model and Suffix Code FT K- 42- A AW type K, Class 1 K Diameter of protection tube 42 Protection tube PFA (Fluororesin) A Length of protection tube () (Each ) *2 (Each ) Lead wire length (L2) *2 (Each 1000) o terminal lugs *terminal soldered W Spade lugs for JIS standard "M3" size screw Y3 Lead wire Spade lugs for JIS standard "M4" size screw Y4 Ring lugs for JIS standard "M3" size screw R3 Ring lugs for JIS standard "M4" size screw R4 Pure water cleaning Pure water cleaning & Clean packing AW *2 : Total length of Protection tube and lead wire can be up (10m). Resistance Temperature Detecr FR-100 Model and Suffix Code FR DPA A AW Resistance Pt100, Class A, detecr type Middle type Diameter of protection tube Protection tube PFA (Fluororesin) Length of 250 protection tube () (Each ) *3 (Each ) Lead wire length (L2) *3 (Each 1000) 9000 Lead wire o terminal lugs * terminal soldered Pure water cleaning Pure water cleaning & Clean packing DPA 42 A *3 : Total length of Protection tube and lead wire can be up (10m). AW 56

3 Reference information (1) element type elements K(CA), J(IC), T(CC), E(CRC),, R, S, B are available. Please find the below chart and choose them according applications. classes are standard as class 2 and an accurate type as class 1. (see the differences of allowance section) All standard types are class 2. (Only standard type for B is class 3) JIS C Symbol K (CA) J (IC) T (CC) E (CRC) R (+) side wire Chromel Iron Chromel icrosil Rhodium13% (-) side wire Alumel Constantan Constantan Constantan isil Element wire diameter () (2) K J T E R,S B Operating range ( C) C 400 C C 550 C 600 C 200 C 200 C 250 C 300 C C 550 C 600 C 700 C 850 C 950 C 1050 C S 1400 C Rhodium10% *1 B C Rhodium30% Rhodium6% *1 Maximum operating is normal operating limit ( limit for continuous operation). For overheating use limitation ( limitation for a short time use for an unavoidable situation), please find JIS standards (JIS C1602). Consider the above chart only as a guide. Operating limit is subject change dependent upon the types of the protection tube. For B type, measurement below 600 C is out of the lerance range. -40 C +375 C +375 C C +375 C +375 C C +125 C ±0.5 C +125 C +350 C -40 C +375 C +375 C C +375 C +375 C + 0 C + ±1 C t is a value which represents regardless of + or - symbols of ( C) C 1 C JIS C Class 1 Class 2 Class 3-40 C +333 C +333 C C +333 C +333 C C +133 C ±1 C +133 C +350 C -40 C +333 C +333 C C +333 C +333 C + 0 C +600 C +600 C C ± t +600 C C ± t -167 C +40 C -200 C -167 C -67 C +40 C ±1 C -200 C -67 C -167 C +40 C -200 C -167 C -167 C +40 C -200 C -167 C +600 C + ±4 C C ±0.005 t 57

4 Reference information Resistance Temperature Detecr (1) Resistance Temperature Detecr RTD (resistance detecr) can be divided in either Pt100 or JPt100 (former). It is more often used for low applications than thermocouples, and has a high accuracy. On the other hand, it is not suitable in a situation where the responsiveness and measurement of surface or tiny spaces are required. Pt100 classes are either B as standard or A as accurate. For standard type, its class is B and its specified current is 2mA. Elements L, M, and H meet JIS C whereas "P" doesn't. Operating range ( C) L (Low Temperature Sheathed type 100 C Pt100 JPt100 ) P (Middle Temperature ) M (Middle Temperature ) H (High Temperature ) Consider the above chart only as a guide. General type ( 3 ) Sheathed type General type(.8 8) Sheathed type General type ( 5 8) (2) JIS C Class ( C) Class A ±( t ) Class B ±( t ) t is a value which represents regardless of + or - symbols of ( C). Measuring ( C) ( C) Class A Class B ±0.55 ±0.35 ±0.15 ±0.35 ±0.55 ±0.75 ±0.95 ±1.15 ±1.35 ±1.45 ±1.3 ±0.8 ±0.3 ±0.8 ±1.3 ±1.8 ±2.3 ±2.8 ±3.3 ±3.6 ±3.8 ±4.3 ± C 350 C (Sheathed type or JPt100 : Up C) Protection Tube SUS304, SUS316(for sheath), and icrobell are available as materials for the protection tube for standard type. It is available select its material based on measured objects and measurement conditions. Diameter Protection tube SUS316 K SUS310S Inconel icrobell J SUS316 T SUS316 icrobell (1) Special Protection Tube Metal protection tube Material Operating for regular use ( C) Maximum ( C) Sandvik P4 (SUH446) Titanium 250 C C Cast Iron 700 C Fluor resin coating 180 C 200 C <ormal operating limits> 300 C 300 C 350 C 350 C <Sheathed type> Features JIS C 1605,(icrobell is out of JIS standard) C 1050 C 350 C 350 C 1150 C Excellent heat resistance and contained 27% chromium steel. Excellent salt-bath, melted metal, and acid resistance under high. It can be used for sulfate containing reducing flame. Extremely excellent corrosion resistance, however this feature will be fragile under high by oxidization. Extreme mechanical resistance. Fluor resin (FEP) coating with SUS316 sheath. Incredible chemical resistance under low. on-metal protection tube Material Operating Maximum for regular use ( C) ( C) Features Hard glass C 600 C Heatproof limit is low. Fragile thermal and mechanical shock and has a resistance alkaline and acid. Has a resistance sudden cooling and heating, Meanwhile, its strength is small. Vulnerable Silica glass alkaline, and resistant acidity. Airtightness is deteriorated in hydrogen and reducing atmosphere. High alumina 1400 C 1 Incredible air proof. Melted metal and combustion gas resistance. Vulnerable metallic oxide Ceramic tube 1 C 1550 C and alkaline. Pure sintering alumina 1700 C 1 Incredible air proof. It is a neutral refracry. Melted metal, glass, and leady slag resistant. Vulnerable thermal shock. Zirconia C It is thermal resistant and air proof. Excellent resistance corrosion from glass and metallic slag. Silicon carbide 1 C 1700 C Good electrical and thermal conductivity. Withstand sudden heating, cooling, and oxidizing for its massive thermal strengthens. Silicon nitride 1600 C Excellent corrosion resistance non-ferrous metals. Its thermal shock resistance is also excellent. Ceramic JIS Special 1600 C Available be stable measurement in a oxidized, reducing atmosphere, and high vacuum ambient environment. Ceramic JIS 1 1 C Excellent thermal and corrosion resistance. Good thermal characteristics. Ceramic JIS C Less thermal softening and good thermal shock resistant. Temperature for regular use and maximum vary dependent upon the diameter of the protection tube. 58

5 Reference information Lead Wire : Compensation cable (), wire (Resistance detecr) Compensation cable is used for thermocouple. wire is used for RTD. There are other types of the lead wire such as glass fiber (EXB), vinyl coating(exd) and so on. Please specify its type. To use the copper lead wire for thermocouple result in inaccurate measurement. Characteristics of lead wire should be same as the element of thermocouple. lead wire is used for RTD. Pay attention for wiring due three-wires. Make sure that a resistance value of each wire is balanced. Below chart is the plain specification for each compensation lead wire. JIS C Composition of core *1 Shearh Contact point Applications Code (JIS) compensation Error (+) Side (-) Side Material *2 Color ( C) (μv) *3 K KCC-G KCB-H Iron Alloy of and ichel Alloy of and ichel Blue ±100 J JX-G JX-H Iron Alloy of and ichel Yellow ±140 T TX-G TX-H Alloy of and ichel Brown ±60 E EX-G EX-H Alloy of ichel and Chrome Alloy of and ichel Purple ±200 X-G X-H Alloy of ichel and Chrome Alloy of ichel and Silicon Pink ± R S B RCM-G RCM-H SCA-G SCA-H BC-G Alloy of and ichel *1: 4 wires is available for both (+) and (-). *2:Codes and types for external material (Coating) is based on JIS. Please refer the below chart for the other types. *3:It is concerinig of the junction with element and compensation cable. *4: value is not specified since a material for + core wire and - core wire is identical. Compensation cable JIS C (EXE, EXF is out of JIS standard) Code Details Operating EXA For heat-resistive, with stainless steel EXB For heat-resistive, C EXC EXD EXE EXF For standard, PVC (polyvinyl chloride) with copper wire braided For standard, PVC (polyvinyl chloride) For heat-resistive, Silicone rubber For heat-resistive, Fluorocarbon polymers (FEP) C (KCB,RCA,SCA,BC : 0 90 C) C C Responsiveness of sensors Black Gray ±30 Composition of Compensation cable Insulation Sheath Core wire It takes a certain time for measuring junction of thermocouple or element of RTD reach the same with measuring object. The shorter the pipe is, the faster the response is. Meanwhile mechanical resistance becomes weaken. It is important select a sensor according purpose and condition. Please refer following chart as a guide. Response time (Atmospheric boiling water) Reference values Reference values 63.2% 95.0% 63.2% 95.0% (General type) Sheathed sec 0.8 sec 0.05 sec 0.15 sec 0.5 sec 1.0 sec 2.7 sec 0.9 sec 2.6 sec 0.2 sec 0.6 sec 1.8 sec 2.6 sec 10.7 sec Resistance detecr (General type) Sheathed resistance detecr (General type) sec 9.2 sec 5.5 sec 15 sec 7.1 sec 19 sec 11.8 sec 33 sec 3.2 sec 8.7 sec 4.2 sec 11.5 sec 8.7 sec 21 sec *4

6 Temperature sensor specification check sheet (For General type and Sheathed type) Please make a copy of this specification check sheet and send it our distriburs. Check Item Reference page Check Protection tube type General type Sheathed type ICROBELL sheathed type Page 3 Page 4 K J T E R B S PLII W5Re/W26Re Grounded () Ungrounded Exposed Page 11 Page 27 Single element () Double element () Class 2 () Class 1 Class 3 ( B) Page 45 Resistance Temperature Detecr (RTD) Page 54 Single element () Double element (Resistance Class B () Class A detecr) Grounded () Ungrounded Operating ormal : C Maximum : C Straight type (Please check one out of 6 from the following pictures) 90 bend type Length of protection tube () (Please check one out of 2 from the following pictures) Diameter of protection tube () Length of protection tube () (L2) Diameter of protection tube () L2 Shape Page 11 Page 27 () Page 45 Page 54 (Resistance detecr) With spring loaded L2 With spring loaded Other: please draw external view With spring loaded Optional With stainless flexible lead wire Fluor resin coating Other o bracket Fixed flange JIS K A or B Fixed nipple (nut) (Check either parallel or taper screw) Rotary nipple (nut) (Check either parallel or taper screw) Parallel screw G (PF) Taper screw R (PT) Mounting Bracket Page 6 G (P.F) R (P.T) Compression fitting Taper screw R(PT) Other Lead protection Lead wire length Lead wire Page 59 Page 11 Page 54 Page 7 Page 8 with stainless steel PVC (polyvinyl chloride) with copper wire braided PVC (polyvinyl chloride) Silicone rubber Fluorocarbon polymers (FEP) o terminal lugs *terminal soldered Spade lugs (M3 size) Ring lugs (M4 size) Metal connecr connecr Other Plug Receptacle Plug Jack Other requests or environments of usage Measuring object or application (for reference) Company ame ame Country Address Address Phone umber 60