Schedule. This laboratory has demonstrated its technical competence to operate in accordance with MS ISO/IEC 17025:2005 (ISO/IEC 17025:2005).

Transcription

1 LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 11 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG ISKANDAR PUTERI, JOHOR MALAYSIA FIELD OF TESTING: MECHANICAL This laboratory has demonstrated its technical competence to operate in accordance with MS ISO/IEC 17025:2005 (ISO/IEC 17025:2005). This laboratory s fulfillment of the requirements of ISO/IEC means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results and calibrations. The management system requirements in ISO/IEC are written in language relevant to laboratory operations and operate generally in accordance with the principles of ISO 9001 (see Joint ISO-ILAC-IAF Communiqué dated April 2017). Tension Test (a) - Tension on test plates, tubular sections and fasteners at ambient temperature in the range of 0 kn to 2000 kn with controlled strain rate and crosshead movement, including yield and proof stress. - Ultimate tensile strength of rebar in the range of 0 kn to 2000 kn - Modulus of elasticity on test pieces in the range of 0 kn to 2000 kn *ASME IX 2017 *API (Errata 4, 2015, Addendum 2:2016) *NKK Rules Part K Chapter ASTM B ASTM E8/E8M 2016a SS 2-Part 1: 1999 SS 2-Part 2: 1999 SS 2-Part 3: 1987 BS EN ISO : 2016 BS 4449+A3: 2016 SS 18 -Part 1: 1999 BS EN ISO 4136: 2012 AS 1391: 2007 (Amendment 1:2012) AS :2003 ASTM F606/F606M 2016 ASTM B557M 2015 AWS B JIS Z (Errata 2012) BS EN ISO :2010

2 Page: 2 of 11 (Continue) (b) Through Thickness Tensile Test *Lloyd s Pt.2, Chapter 3: Sect *ABS Pt.2, Chapter 1: Sect 1-17:2017 (c) All Weld Tensile Test *ASME IX 2017 (d) Tensile test on cruciform and lapped joints. Hardness Test Vickers Hardness Test in the range of 0.3 kgf to 20 kgf ASTM A770/770M 2003 (reapproved 2012) E1 BS EN 10164: 2004 ISO 7778:2014 ISO BS EN ISO AS : 2003 AWS B BS EN ISO 9018: 2015 ASTM E ASTM E ASTM A ASTM E b E1 BS EN ISO : 2011 BS EN ISO :2005 AS : 2003

3 Page: 3 of 11 (Continue) Rockwell Hardness Test ASTM E BS EN ISO : 2016 Impact Test Charpy V-notch Impact Tests from ambient temperature down to -110 o C and -196 o C *ASME IX 2017 Bend Test / Roller Bend Test *ASME IX 2015 *API (Errata 4, 2015, Addendum 2, 2016) Bend Test / Rebend Test *SS 32 Part 1: 1999 *SS 32 Part 2: 1986 *SS 18 Part 1: 1999 ASTM E b BS EN ISO 148-1: 2016 AS : 2003 AWS B ASTM E ASTM E AS :2003 AS :2003 BS EN ISO 5173: A1: 2011 AWS B SS 2: Part SS 2: Part SS 2: Part BS A3: 2016 SS BS EN ISO :2010 Fracture Test AWS D1.1/D1.1M 2015 Clause ASME IX 2017 Clause QW-182 AWS D1.2/D1.2M 2014 Clause 3.10 (Option 1)

4 Page: 4 of 11 (Continue) Flattening Test *ABS Pt.2, Chapter 3: Sect *Lloyd s Pt.2, Chapter 2: Sect Flaring / Flanging Test (Up to outside diameter of 2 inches) *ABS Pt.2, Chapter 3: Sect 5-23& *Lloyd s Pt.2, Chapter 2: Sect 4.3& Nick Break Test *API (Errata 4, 2015; Addendum 2, 2016) 1. - Macro Examination - Macroscopic Examination on Welds *ASME IX 2017 *API (Errata 4, 2015, Addendum 2, 2016) ASTM E BS EN ISO 17639: Macro-etching of Metals and Alloys *ASME IX 2017 ASTM E AS : 2003

5 Page: 5 of 11 Steel Wire Mesh (Grade 300 & 500) (Grade 485) Tension Test Tension on steel wires taken from wire fabric at ambient temperature in the range of 0 kn to 2000 kn with controlled strain rate and crosshead movement, including yield and proof stress. *SS 32 Part 1: 1999 *SS 32 Part 2: 1986 *SS 18 Part 1: 1999 BS EN ISO : 2016 BS EN ISO :2010 Bend and Rebend Test SS 427: 1998 BS EN ISO :2010 Weld Shear Test Remarks: (*) denotes product/materials specification 2. Soo Boon Chai 3. Ronica Binti Premjit 4. Marquzah Binti A Bakar SS 32 Part 1: 1999 Annex A SS 32 Part 2: 1986 Clause BS EN ISO :2010

6 Page: 6 of Soo Boon Chai 4. Ronica Binti Premjit 5. Marquzah Binti A Bakar Tensile Test at Elevated Temp, (up to 750 C) in the range of 0 kn to 300 kn with controlled strain rate & crosshead movement, including yield & proof stress ASTM E BS EN ISO :2011 Brinell Hardness Test ASTM E BS EN ISO : 2014

7 Page: 7 of 11 Fracture Mechanics Toughness Tests Crack Tip Opening Displacement (CTOD) test and J-Integral - Single Edge Notched Bend (SENB) Fracture Mechanics Toughness Tests Crack Tip Opening Displacement (CTOD) test and J-Integral - Single Edge Notched Tension (SENT) BS ISO BS EN ISO ASTM E AS DNV-RP-F108 : Jan 2006 BS 8571:2014 Fatigue Test ISO 1099 : 2017 BS EN ISO : 2010 BS EN ISO : 2010 BS 4449 : A3 : 2016 Hydrogen Disbonding Test ASTM G (Reapproved 2013)

8 Page: 8 of 11 Corrosion Test Hydrogen Induced Cracking (HIC) Test NACE Standard TM Item No Wong Kok Wei 3. Tan Keng Lip Sulfide Stress Corrosion Cracking (SSCC) Test ASTM G (Reapproved 2016) BS EN ISO : 2012 BS EN ISO : 1995 NACE Standard TM Item No

9 Page: 9 of 11 Corrosion Test Pitting Corrosion Test ASTM G (Reapproved 2015) (Method A) Intergranular Corrosion Test ASTM A (Practice E) ASTM A (Practice C) Microstructural Test Detection of Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels Coating Mass Determination for Zinc or Zinc-Alloy Coatings Average Grain Size Measurement Determining Volume Fraction by Systematic Manual Point Count ASTM A (Method C) ASTM A90/A90M-2013 BS EN ISO 1460 : 1995 ASTM E (Comparison Method) ASTM E Tan Horng You 3. Khor Cheng Lee

10 Page: 10 of 11 (METALLURGICAL) Carbon and low alloys steel Elements: Al, B, C, Cr, Co, Cu, Mn, Mo, N, Ni, Nb, P, Si, S, Sn, Ti, V, W Stainless steels Elements: Cr, Ni, Mo, Mn, Si, N, Cu, C, P, S Nickel Alloys Elements: Al, C, Cr, Co, Cu, Fe, Mn, Mo, Nb, P, Si, S, Ti, V, W 2. Tan Horng You Metallurgical Testing Elemental Analysis (Metal Composition Determination) Elemental Analysis (Metal Composition Determination) Elemental Analysis (Metal Composition Determination) ASTM A a ASTM E ASTM A a ASTM E In house Method PTS M001 (Based on Arc Spark Spectrometry Method)

11 Page: 11 of 11 SITE: CATEGORY I Dimensional Measurement - Linear measurement in the range of up to 20 m. - Weight measurement in the range of up to 500 kg. - Corner radius measurement in the range of 0.5 mm to 13 mm. * ASTM A6/A6M-2016a * ASTM A20/A20M-2015 * BS EN : 2004 * BS EN : 2004 Remarks: (*) denotes product/materials specification 2. Soo Boon Chai In-House Test Method PTS-M002