Grilamid LBV-50H FWA black 9225 EMS-GRIVORY a unit of EMS-CHEMIE AG

Transcription

1 Grilamid LBV-50H FWA black 9225 PA12-GF50 Product Texts Product designation according to ISO 1874: PA12, MH, , GF50 Mechanical properties dry / cond Unit Test Standard Tensile Modulus / MPa ISO 527-1/-2 Stress at break 170 / 160 MPa ISO 527-1/-2 Strain at break 5 / 5 % ISO 527-1/-2 Charpy impact strength (+23 C) 95 / 90 kj/m² ISO 179/1eU Charpy impact strength (-30 C) 95 / 90 kj/m² ISO 179/1eU Charpy notched impact strength (+23 C) 18 / 18 kj/m² ISO 179/1eA Charpy notched impact strength (-30 C) 14 / 14 kj/m² ISO 179/1eA Mechanical properties (TPE) dry / cond Unit Test Standard Shore D hardness (15s) - / 86 - ISO 868 Ball indentation hardness - / 190 MPa ISO Thermal properties dry / cond Unit Test Standard Melting temperature (10 C/min) 178 / - C ISO /-3 Temp. of deflection under load (1.80 MPa) 160 / - C ISO 75-1/-2 Temp. of deflection under load (8.00 MPa) 110 / - C ISO 75-1/-2 Coeff. of linear therm. expansion (parallel) 15 / - E-6/K ISO /-2 Coeff. of linear therm. expansion (normal) 90 / - E-6/K ISO /-2 Max. usage temperature (long term) C ISO 2578 Max. usage temperature (short term) 150 C EMS Electrical properties dry / cond Unit Test Standard Volume resistivity - / 1E10 Ohm*m IEC Surface resistivity - / 1E11 Ohm IEC Electric strength - / 40 kv/mm IEC Comparative tracking index - / IEC Other properties dry / cond Unit Test Standard Water absorption 0.8 / - % Sim. to ISO 62 Humidity absorption 0.4 / - % Sim. to ISO 62 Density 1470 / - kg/m³ ISO 1183 Rheo/Phys properties dry / cond Unit Test Standard Molding shrinkage (parallel) 0.1 / - % ISO 294-4, 2577 Molding shrinkage (normal) 0.5 / - % ISO 294-4, 2577 Characteristics Processing Injection Molding Delivery form Granules Special Characteristics High impact or impact modified, Improved UV resistance (outdoor Product Attributes Hydrolysis resistant Industry & Consumer goods Heating systems, Sanitary, water and gas supply Food Contact EU Requirements, FDA Page: 1/2

2 Grilamid LBV-50H FWA black 9225 PA12-GF50 use), Improved heat resistance Regional Availability Water contact NSF 61, KTW, WRAS, ACS, DVGW W270 North America, Europe, Asia Pacific, South and Central America, Near East/Africa Page: 2/2

3 Grilamid 2SV-30H black 9992 PA610-GF30 Product Texts Product designation according to ISO 1874: PA 610, MHR, , GF30 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 9000 / 7000 MPa ISO 527-1/-2 Stress at break 155 / 120 MPa ISO 527-1/-2 Strain at break 4 / 6 % ISO 527-1/-2 Charpy impact strength (+23 C) 95 / 95 kj/m² ISO 179/1eU Charpy impact strength (-30 C) 90 / 90 kj/m² ISO 179/1eU Charpy notched impact strength (+23 C) 18 / 16 kj/m² ISO 179/1eA Charpy notched impact strength (-30 C) 11 / 11 kj/m² ISO 179/1eA Mechanical properties (TPE) dry / cond Unit Test Standard Ball indentation hardness 180 / 120 MPa ISO Thermal properties dry / cond Unit Test Standard Melting temperature (10 C/min) 222 / - C ISO /-3 Temp. of deflection under load (1.80 MPa) 200 / - C ISO 75-1/-2 Temp. of deflection under load (8.00 MPa) 120 / - C ISO 75-1/-2 Coeff. of linear therm. expansion (parallel) 25 / - E-6/K ISO /-2 Coeff. of linear therm. expansion (normal) 80 / - E-6/K ISO /-2 Burning Behav. at thickness h HB / - class IEC Thickness tested 0.8 / - mm IEC Max. usage temperature (long term) C ISO 2578 Max. usage temperature (short term) 170 C EMS Electrical properties dry / cond Unit Test Standard Volume resistivity 1E9 / 1E9 Ohm*m IEC Surface resistivity - / 1E11 Ohm IEC Electric strength 45 / 45 kv/mm IEC Comparative tracking index - / IEC Other properties dry / cond Unit Test Standard Water absorption 4 / - % Sim. to ISO 62 Humidity absorption 1 / - % Sim. to ISO 62 Density 1310 / - kg/m³ ISO 1183 Rheo/Phys properties dry / cond Unit Test Standard Molding shrinkage (parallel) 0.2 / - % ISO 294-4, 2577 Molding shrinkage (normal) 0.8 / - % ISO 294-4, 2577 Characteristics Processing Injection Molding Delivery form Granules Product Attributes Bio based Polyamide Automotive Air intake sytems, Compressed air systems, Hydraulic systems, Automotive electr. and electronics, lighting, Cooling and climate control, Fuel systems, Powertrain and Chassis, Interior, Exterior Page: 1/2

4 Grilamid 2SV-30H black 9992 PA610-GF30 Special Characteristics High impact or impact modified, Improved UV resistance (outdoor use), Improved heat resistance Regional Availability North America, Europe, Asia Pacific, South and Central America, Near East/Africa Electricals & Electronics Electrical appliances, Electrical equipment, Connectors, Lighting, Mobile phones and other portable devices Industry & Consumer goods Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Power transmission, Sports & Leisure, Tools & Accessories Page: 2/2

5 Grilamid XE 4105 black 9992 PA610-GF50 Product Texts Product-nomenclature according to ISO 1874: PA610, MHR, , GF50 Mechanical properties dry / cond Unit Test Standard Tensile Modulus / MPa ISO 527-1/-2 Stress at break 205 / 160 MPa ISO 527-1/-2 Strain at break 3.2 / 4.5 % ISO 527-1/-2 Charpy impact strength (+23 C) 80 / 80 kj/m² ISO 179/1eU Charpy impact strength (-30 C) 70 / 80 kj/m² ISO 179/1eU Charpy notched impact strength (+23 C) 15 / 16 kj/m² ISO 179/1eA Charpy notched impact strength (-30 C) 11 / 11 kj/m² ISO 179/1eA Mechanical properties (TPE) dry / cond Unit Test Standard Ball indentation hardness 245 / 175 MPa ISO Thermal properties dry / cond Unit Test Standard Melting temperature (10 C/min) 225 / - C ISO /-3 Temp. of deflection under load (1.80 MPa) 200 / - C ISO 75-1/-2 Temp. of deflection under load (8.00 MPa) 150 / - C ISO 75-1/-2 Coeff. of linear therm. expansion (parallel) 20 / - E-6/K ISO /-2 Coeff. of linear therm. expansion (normal) 80 / - E-6/K ISO /-2 Burning Behav. at thickness h HB / - class IEC Thickness tested 0.8 / - mm IEC Max. usage temperature (long term) C ISO 2578 Max. usage temperature (short term) 160 C EMS Electrical properties dry / cond Unit Test Standard Volume resistivity 1E10 / 1E10 Ohm*m IEC Surface resistivity - / 1E11 Ohm IEC Electric strength 35 / 34 kv/mm IEC Comparative tracking index - / IEC Other properties dry / cond Unit Test Standard Water absorption 1.9 / - % Sim. to ISO 62 Humidity absorption 0.8 / - % Sim. to ISO 62 Density 1530 / - kg/m³ ISO 1183 Rheo/Phys properties dry / cond Unit Test Standard Molding shrinkage (parallel) 0.1 / - % ISO 294-4, 2577 Molding shrinkage (normal) 0.8 / - % ISO 294-4, 2577 Characteristics Processing Injection Molding Delivery form Product Attributes Bio based Polyamide Automotive Granules Air intake sytems, Compressed air systems, Hydraulic systems, Automotive electr. and electronics, lighting, Cooling and climate control, Fuel systems, Powertrain and Chassis, Interior, Exterior Created: Source: Page: 1/2

6 Grilamid XE 4105 black 9992 PA610-GF50 Special Characteristics Light stabilized or stable to light, Improved UV resistance (outdoor use), Improved heat resistance Regional Availability North America, Europe, Asia Pacific Electricals & Electronics Electrical appliances, Electrical equipment, Connectors, Lighting, Mobile phones and other portable devices Industry & Consumer goods Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Power transmission, Sports & Leisure, Tools & Accessories Created: Source: Page: 2/2