More than 10 years in Ultrapure Water System Manufacture, we are going with you in your high water quality demand better understanding in service

Transcription

1 More than 10 years in Ultrapure Water System Manufacture, we are going with you in your high water quality demand better understanding in service good solutions and cost efficiency. Our ULTRAPUREPLUS machine series can be adapted with all of your requests.

2 ULTRAPURE WATER MACHINE ULTAPURE PLUS New technologies are applied to our products to get more advantage in quality and cost. All piping, fitting and equipment are following pharmacy standard. The design is easy for operation maintenance and installation DI WATER SYSTEM MODULE HIGHFLOW ULTRAPURE PLUS The module is a standard design. It is applied to any demand for high flow DI water in Lab and suitable capacity for any low flow production plant. Just connect the inlet water power supply, the user can get the standard water as your requirement. UF MBR SKID WASTE RECICLE WATER SYSTEM STANDARD PURIFY Eco technologies is the main factor in our design. The Skid can be used for waste water recycle, reduce water waste, reduce spacing and resource. Base on our high-tech design with new UF-MBR technologies to get advantage compare to most current UF-MBR technologies on the world. Simple installation Simple operation optimize cost and Eco-Solution is our target to design and manufacture our products.

3 An Ultrapure Water Machine which can be replaced for 2 times distillation machine Pull range of capacity from 5 t0 200 l/h Quality can be reached over 16.0 MΩ.cm resistivity Product is at the tap Just open tap to get continuously product Quality monitor and auto recirculation Auto stop whenever feed water pressure too low Auto recirculation for bio treatment Saving energy by using higher technologies to achieve the Ultrapure Water quality Less drain water to get a high quality water compare to distillation technologies Without heater, heater scale issue will be disappeared Module designed will be the high advantage in maintenance and warrantee Spare are ready in stock will take a shorter time for maintenance and spare replacement 24/7 service will adapt your expect in professional way of working and service 24 months in warrantee will be a high efficiency in investment.

4 Ultrapure Plus Type 3 is a high advantage Ultrapure water machine, designed by RO and DI technologies. The quality of produce water is for a wide range of laboratory and general manufacturing applications. Specially applied in Lab, Food and beverage, Semiconductor. The machine is cost-effective and easy to installation with a compact designed. The Pure Easy provide medium and high purity water. Water quality is easy to monitor, with built in conductivity monitor. APPLICATION General analysis Sample dilution and solution preparation FEATURE Easy to install Small space Mobile DI system Recycle material Low cost Ready spare parts quick maintenance Conductivity Indicator (*) Product Water Quality ASTM type 3 Model UPP T3-5 UPP T3-10 UPP T3-15 UPP T3 25 UPP T3-100 UPP T3-150 Conductivity (µs/cm) < 0.25 <0.25 <0.25 <0.25 <0.25 <0.25 ph ~7 ~7 ~7 ~7 ~7 ~7 Total Silica (µg/l) TOC (µg/l) Chlorides (µg/l) Sodium (µg/l) Bacteria (CFU/ml) < Endotoxin (EU/ml) N/A N/A N/A N/A N/A N/A

5 Model: Ultrapure Easy Type 3 SYSTEM PERFORMANCE UPP T3 5 UPP T3 10 UPP T3 15 UPP T3 25 UPP T3 100 UPP T3 150 Max ope flow (l/h) Ope Pressure (bar) Max Ope pressure (bar) Max Temp ( o C) Feed Pressure Max (bar) Feed Pressure Min (bar) DIMENSION AND WEIGHT Height (mm) Width (mm) Length (mm) Weight (kg)* FEED WATER REQUIREMENT Conductivity (µs/cm) < 100 Turbidity (NTU) < 1 Hardness (µg/l) Iron (µg/l) 500 Silica (µg/l) Chlorides (µg/l)

6 An Ultrapure Water Machine which reach USP ASTM standard Pull range of capacity from 5 t0 25 l/h Quality can be reached over 16.5 MΩ.cm resistivity PTFE material of piping, pitting and valves to pass bacteria content in pharmacy water requirements TOC removal system can be got the result < 50 µg/l Saving cost by using higher technologies to achieve the Ultrapure Water quality CEDI is the best option in maintain water quality without changing spare part to reach over 16.0 MΩ.cm resistivity Our design and local stock will be a better option in price reducing and delivery timing advance. Any issue in water quality and equipment problem we can fit it soonest by using our new machine to temporary replace to wait for maintenance 24/7 service will adapt your expect in professional way of working and service 12 months warrantee for fully quality of product and equipment.

7 Model: Ultrapure Plus Type 2 (ASTM TYPE 2 USP 27) Pure Easy is a high advantage Ultrapure Water Machine, designed by RO, CEDI and model sterilize technologies. The quality of product water is used for a wide range of laboratory and general manufacturing applications. Specially applied in Pharmacy, F&B, semiconductor. The deionizers are cost-effective and easy to installation with a compact designed. The Pure Easy provide medium and high pure water. Water quality is easy to monitor, with built in conductivity monitor. APPLICATION General analysis Sample dilution and solution preparation Pyrogen-sensitive applications Cell and tissue culture PCR HPLC FEATURE Easy to install Small space Mobile DI system Recycle material Low cost Ready spare parts quick maintenance Conductivity Indicator (*) Product Water Quality ASTM Type 2 Model UPP T2 5 UPP T2-10 UPP T2-15 UPP T2 25 UPP T2 100 UPP T2-150 Conductivity (µs/cm) <1 <1 <1 <1 <1 <1 ph ~7 ~7 ~7 ~7 ~7 ~7 Total Silica (µg/l) TOC (µg/l) Chlorides (µg/l) Sodium (µg/l) Bacteria (CFU/ml) Endotoxin (EU/ml)

8 SYSTEM PERFORMANCE UPP T2 5 UPP T2-10 UPP T2-15 UPP T2 25 UPP T2 100 UPP T2-150 Max ope flow (l/h) Ope Pressure (bar) Max Ope pressure (bar) Max Temp ( o C) Feed Pressure Max (bar) Feed Pressure Min (bar) DIMENSION AND WEIGHT Model UPP T2 5 UPP T2-10 UPP T2-15 UPP T2 25 UPP T2 100 UPP T2-150 Height (mm) Width (mm) Length (mm) Weight (kg)* FEED WATER REQUIREMENT Conductivity (µs/cm) < 100 Turbidity (NTU) < 1 Hardness (µg/l) Iron (µg/l) 500 Silica (µg/l) Chlorides (µg/l)

9 Model: ULTRAPURE PLUS TYPE 1 (ASTM TYPE 1) ULTRAPURE PLUS TYPE 1 is an ultrapure water machine, the main technoiloguies of the machine is RO and/or TRUEDI and/or CEDI. Out let water quality is applied for many application including in Semiconductor Pharmacy PCR HPLC The machine is custom designed, easy to install and efficiency for investment. UPP T1 has the outlet water quality reach conductivity to us/cm. Conductivity will be easy to read from the conductivity monitor. Application General analysis Sample dilution and solution preparation Pyrogen-sensitive applications Cell and tissue culture PCR HPLC FEATURE Easy to install Small space Mobile DI system Recycle material Low cost Ready spare parts quick maintenance Conductivity Indicator (*) Product Water Quality ASTM type 1 Model UPP T1 5 UPP T1-10 UPP T1-15 UPP T1 25 UPP T1 100 UPP T1-150 Conductivity (µs/cm) ph ~7 ~7 ~7 ~7 ~7 ~7 Total Silica (µg/l) TOC (µg/l) Chlorides (µg/l) Sodium (µg/l) Bacteria (CFU/ml) Endotoxin (EU/ml)

10 SYSTEM PERFORMANCE UPP T1 5 UPP T1-10 UPP T1-15 UPP T1 25 UPP T1 100 UPP T1-150 Max ope flow (l/h) Ope Pressure (bar) Max ope Pressure (bar) Max ope Temp ( o C) Max feed pressure (bar) Min feed pressure (bar) DIMENSION AND WEIGHT Model UPP T1 5 UPP T1-10 UPP T1-15 UPP T1 25 UPP T1 100 UPP T1-150 Height (mm) Width (mm) Length (mm) Weight (kg)* FEED WATER REQUIREMENT Conductivity (µs/cm) < 100 Turbidity (NTU) < 1 Hardness (µg/l) Iron (µg/l) 500 Silica (µg/l) Chlorides (µg/l)

11 High flow Ultrapure water machine applied to any high flow demand in Lab with DI water quality requirement. Pull range of capacity from 100 t0 250 l/h Quality can be reached over 16.0 MΩ.cm resistivity Rejection is around 25% Auto recirculation to reduce the bio grow up event the system is in free of operation CEDI or DI technologies can be applied to get the best result. Movable and flexible in transportation The quality of product and all of equipment are in warrantee in 24 months 24/7 service will adapt your expect in professional way of working and service All piping system are in Food standard

12 High flow Ultrapure water machine applied to any high flow demand in Lab or manufacture with USP ASTM water quality standards. Pull range of capacity from 100 t0 250 l/h Quality can be reached over 16.0 MΩ.cm resistivity Rejection is around 25% Auto recirculation to reduce the bio grow up event the system is in free of operation CEDI and DI technologies is applied to get the best result. Movable and flexible in transportation The quality of product and all of equipment are in warrantee in 24 months 24/7 service will adapt your expect in professional way of working and service All piping system are in Pharmacy Standard