ADAPTORS. SMA / SMB / N to SSMB / TNC. Part No. 1A Part No. 1A N PLUG TO TNC PLUG. Part No. 1A Part No.

Transcription

1 ADAPTORS SMA / SMB / N to SSMB / TNC SMA JACK TO SSMB PLUG SMA PLUG TO SSMB JACK Part No. 1A Part No. 1A SMB PLUG TO TNC PLUG Part No. 1A N PLUG TO TNC PLUG N PLUG TO TNC JACK Part No. 1A Part No. 1A N JACK TO TNC PLUG N JACK TO TNC JACK Part No. 1A Part No. 1A

2 N to TNC / BNC / MCX / SSMB Right angle N PLUG TO TNC PLUG Right angle N JACK TO TNC PLUG Part No. 1A Part No. 1A N PLUG TO BNC PLUG N PLUG TO BNC JACK Part No. 1A Part No. 1A N JACK TO BNC PLUG N JACK TO BNC JACK Part No. 1A Part No. 1A N JACK TO MCX JACK N PLUG TO SSMB JACK Part No. 1A Part No. 1A

3 ADAPTORS TNC / MCX to BNC TNC PLUG TO BNC PLUG TNC PLUG TO BNC JACK Part No. 1A Part No. 1A TNC JACK TO BNC PLUG TNC JACK TO BNC JACK Part No. 1A Part No. 1A BNC PLUG TO MCX JACK Part No. 1A

4 DIN to N DIN 7/16 PLUG TO N PLUG DIN 7/16 PLUG TO N JACK Part No. 1A Part No. 1A DIN 7/16 JACK TO N PLUG DIN 7/16 JACK TO N JACK Part No. 1A Part No. 1A N JACK TO PANEL 7/16 JACK Part No. 1A

5 ADAPTORS N to BNC / F-75Ω N PLUG TO BNC PLUG N PLUG TO BNC JACK Part No. 1A Part No. 1A N JACK TO BNC PLUG N JACK TO BNC JACK Part No. 1A Part No. 1A N PLUG TO F PLUG N PLUG TO F JACK Part No. 1A Part No. 1A N JACK TO F PLUG N JACK TO F JACK Part No. 1A Part No. 1A

6 BNC to F-75Ω BNC JACK TO F PLUG BNC JACK TO F JACK Part No. 1A Part No. 1A

7 ETC Connector BMA SMC SSMB / SSMC F-TYPE SMI ANTENNA

8 Cable Assemblies

9 Cable Assemblies Semi-Rigid Cable Assemblies

10 Semi-Flexible Cables

11 Cable Assemblies Flexible Cables

12 Flexible Cables

13 Cable Assemblies Feeder Cables

14 RF Components 1. POWER DIVIDER/COMBINER 2. DIRECTIONAL COUPLER 3. ARRESTERS 4. ATTENUATORS 5. TERMINATIONS 6. BIAS TEES 7. FILTER -BAND PASS FILTER -DUPLEXER RF Components

15 RF Components 1. POWER DIVIDER/COMBINER Characteristics - Low Insertion Loss - Low V.S.W.R - High Isolation - Aluminum Body - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. PD-05- PD-08- PD-20- PD-20- PD-20- PD-03- PD-20-2S/N 2S/N 2S/N 4S/N 6S/N 6S/N 8S/N Freq. Range (GHz) DC DC n-way Insertion Loss (db) 3.4 max. 3.2 max. 3.2 max. 6.3 max. 8.3 max. 8.8 max. 9.5 max. VSWR 1.2:1 1.2:1 1.2:1 1.2:1 1.2:1 1.3:1 1.2:1 Isolation (db) 20 min. 20 min. 20 min. 20 min. 20 min. 20 min. 20 min. Operating Power (W) Impedance (Ω) Connector (I/O) SMA/N SMA/N SMA/N SMA/N SMA/N SMA/N SMA/N

16 2. DIRECTIONAL COUPLER Characteristics - Low insertion Loss - Power Monitering - High Directivity - High Power Operation - Aluminum Body - Compact size USE - Mobile Communication Equipment SPECIFICATION Model No. DC-08- DC-08- DC-08- DC-20- DC-20- DC-20- DC-20-10S/N 20S/N 30S/N 10S/N 20S/N 30S/N 40S/N Freq. Range (GHz) Coupling Value (db) 10±0.5 20±0.5 30±0.5 10±0.5 20±0.5 30±0.5 40±0.5 Insertion Loss (db) 0.6 max. 0.1 max. 0.1 max. 0.6 max. 0.2 max. 0.1 max. 0.1 max. VSWR 1.2:1 1.2:1 1.2:1 1.2:1 1.2:1 1.2:1 1.2:1 Directivity (db) 20 min. 20 min. 20 min. 20 min. 20 min. 20 min. 20 min. Operating Power (W) Impedance (Ω) Connector (I/O) SMA /N SMA /N SMA /N SMA /N SMA /N SMA /N SMA /N

17 RF Components 3. ARRESTERS Characteristics - Low insertion Loss - RF Surge Protectors - GAS Tube Type - º/4 Type - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. DAR-25G-N1 DAR-25G-N2 DAR-2060S-N1 DAR-08S-N1 DAR-18S-N1 Freq. Range (GHz) DC-2.5 DC TYPE GAS Tube GAS Tube º/4 º/4 º/4 Insertion Loss (db) 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.1 max. VSWR 1.1:1 1.1:1 1.1:1 1.1:1 1.1:1 Surge 3KV/1.5KA(1.25 X 50 `) 6KV/3KA(1.2 X 50 `/0.8 X 50 `) Operating Power (W) Impedance (Ω) Connector (I/O) N(f)-N(f) N(m)-N(f) N(f)-N(f) N(f)-N(f) N(f)-N(f)

18 4. ATTENUATORS Characteristics - Wideband - DC-3GHz - Low Cost - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. ATT-01-30S ATT-01-30N Freq. Range (GHz) DC-3.0 DC-3.0 ATTENUATION (db) 1~30±0.5 1~30±0.5 VSWR 1.2:1 1.2:1 Operating Power (W) 1 1 Impedance (Ω) Connector (I/O) SMA (m) to (f) N-Type (m) to (f)

19 RF Components 5. TERMINATIONS Characteristics - Wideband - Low Cost - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. DJT-50S1 DJT-50S2 DJT-50N1 DJT-50DN1 (DC BLOCK) DJT-750B Freq. Range (GHz) DC-12.0 DC-18.0 DC-6.0 DC-3.0 DC-3.0 VSWR 1.2:1 1.2:1 1.2:1 1.2:1 1.2:1 Operating Power (W) 0.5 max. 0.5 max. 3 max. 1 max. 0.5 max. Impedance (Ω) Connector (I/O) SMA(M) SMA(M) N-TYPE(M) N-TYPE(M) BNC(M)

20 6. BIAS TEES Characteristics - Low Insertion Loss - Low V.S.W.R - Aluminum Body - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. DJBT-WCB-12 DJBT-WCB-12 DJBT-WC02-12 DJBT-WC04-12 Freq. Range (GHz) N-Way Insertion Loss (db) 0.3 max. 1.5 max. 6.0 max. 8.0 max. 0.5 max. 4.0 max. 7.0 max. VSWR 1.2:1 1.2:1 1.2:1 1.2:1 Operating Power (W) Voltage (V)/ Current (A) 24/2.5 24/25 24/5 24/10 Impedance (Ω) Connector (I/O) N(F) to SMA(f) N(F) to SMA(f) N(F) to N (f) to SM(F) SMA(F) to N(f)

21 RF Components 7. FILTER(BAND PASS FILTER) Characteristics - High Performance - High Reliability - Cavity Type - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. DJBT-WCB-12 DJBT-WCB-12 DJBT-WC02-12 DJBT-WC04-12 Freq. Range (MHz) 2,496~2,602 2,300~2,360 2,590~2, ~3460 Insertion Loss (db) 1.4 max. 1.4 max. 1.4 max. 1.0 max. Return Loss (db) 17Min. 17Min. 17Min. 17Min. Attenuation N/A N/A N/A N/A Connector (I/O) SMA(F) SMA(F) SMA(F) SMA(F) In/Out Impedance(Ω) Temp. Range ~40 to +70 O C ~40 to +70 O C ~40 to +70 O C ~40 to +70 O C

22 7. FILTER(DUPLEXER) Characteristics - High Performance - High Reliability - Cavity Type - Compact Size USE - Mobile Communication Equipment SPECIFICATION Model No. DJBT-WCB-12 DJBT-WCB-12 DJBT-WC02-12 Freq. Range (MHz) 3,600~3,653/ 873.5~888.5/ 3,700~3, ~ ~841/ 876~886/ 921~931 Insertion Loss (db) 1.2 max. 2.5/2.3 max. 3.0 max. Return Loss (db) 17Min. 17Min. 18Min. Attenuation N/A N/A N/A Connector (I/O) SMA(F) SMA(F) SMA(F) In/Out Impedance(Ω) Temp. Range ~40 to +85 O C ~40 to +80 O C ~20 to +75 O C

23 Mounting Fiqures Connector Flanges (Panel mounted connectors) panel Cutouts (Bulkhead mounted connectors) panel Cutouts (Bulkhead mounted connectors) 4-hole flanges No. A B C M M #3-56tap ~ #6~32tap #4~40tap ~ D-Hole No. A B Round Hole P.C. Board Drilling 2-hole flanges No. A B C Double D-Hole No. A B (PCB traces are shown for illustrative purpose only, and not representative of actual circuitry) Coaxial connectors No. A B C D PCB PCB PCB PCB PCB

24 VSWR & Return Loss Data RETURN TRANS- TRANS- LOSS MISSION MITTED VSWR VSWR LOSS POWER (db) (db) % RETURN TRANS- TRANS- LOSS MISSION MITTED LOSS POWER (db) (db) %

25 Suitable cables Flexible Cables Cable Inner conductor Insulation Screen jacket Cable type group mm Material ımm Material ımm Type Material ımm material ımm 006 RG6A/U CuSt 0.73 PE 4.7 double CuAg/CuAg 5.4/6.2 PVC 8.45 screen 011 RG11A/U 75 7X0.4 CuSn 1.2 PE 7.25 single Cu 8.15 PVC 10.3 RG144/U 75 7X0.45 CuStAg 1.35 PTFE 7.25 screen CuAg 8.0 PTFE/GSi RG34B/U 75 7X0.62 Cu 1.86 PE 11.5 single Cu 12.4 PVC 16.0 screen 059 RG59B/U CuSt 0.6 PE 3.75 single Cu 4.5 PVC 6.1 RG302/U CuStAg PTFE 3.7 CuAg 4.4 FEP RG164/U Cu 2.65 PE 17.3 single Cu 18.6 PVC 22.1 screen 177 RG177/U PE 5.0 PE 17.3 double CuAg/CuAg 18.05/18.8 PVC 22.7 screen 178 RG178B/U 50 7X0.1 CuStAg 0.3 PTFE 0.83 single CuAg 1.33 FEP 1.8 RG196A/U 50 7X0.1 CuStAg 0.3 PTFE 0.83 Ag 1.33 PFA RG179B/U 75 7X0.1 CuStAg 0.3 PTFE 1.53 single CuAg 2.0 FEP 2.54 RG187A/U 75 7X0.1 CuStAg 0.3 PTFE 1.53 CuAg 2.0 PFA RG212/U CuAg 1.35 PE 4.7 double CuAg/CuAg 5.45/6.2 PVC 8.45 RG222/U CrNi 1.4 PTFE 4.7 screen CuAg/CuAg 5.45/6.2 PVC RG165/U 50 7X0.82 CuAg 2.46 PTFE 7.25 single CuAg 8.0 PTFE/GSi 10.3 RG213/U 50 7X0.75 Cu 2.25 PE 7.25 screen Cu 8.15 PVC 10.3 RG214/U 50 7X0.75 CuAg 2.25 PE 7.25 double CuAg/CuAg 8.0/8.75 PVC RG225/U 50 7X0.82 CuAg 2.46 PTFE 7.25 screen CuAg/CuAg 8.0/8.75 PTFE/GSi 10.9 RG393U 50 7X0.79 CuAg 2.46 PTFE 7.25 CuAg/CuAg 8.0/8.75 FEP RG216/U 75 7X0.4 CuSn 1.2 PE 7.25 double Cu/Cu 8.0/8.75 PVC 10.8 screen 217 RG217/U Cu 2.7 PE 9.4 double Cu/Cu 10.3/11.2 PVC screen 218 RG218/U Cu 5.0 PE 17.3 single Cu PVC 22.1 screen RG174/U 50 7X0.16 CuSt 0.48 PE 1.5 CuSn 2.0 PVC RG188A/U 50 7X0.18 CuStAg 0.54 PTFE 1.55 single CuAg 2.0 PFA 2.6 RG316/U 50 7X0.18 CuStAg 0.54 PTFE 1.54 CuAg 2.05 FEP 2.5 RG142B/U CuStAg 0.95 PTFE 2.95 CuAg/CuAg 3.6/4.25 PVC 4.95 RG223/U CuAg 0.89 PE 2.95 double CuAg/CuAg 3.6/4.2 FEP RG400/U 50 19X0.195 CuAg 1.0 PTFE 2.95 CuAg/CuAg 3.6/4.2 PVC 4.95 RG58C/U 50 19X0.18 CuSn 0.9 PE 2.95 CuSn 3.55 PVC 4.95 RG141A/U CuStAg 0.95 PTFE 2.95 single CuAg 3.6 PTFE/GSi 4.4 RG303/U CuStAg 0.95 PTFE 2.95 CuAg 3.6 FEP 4.3 Semi-Rigid Cables, Semi-Flexible Cables Cable Inner conductor Insulation Screen Cable type group mm Material ımm Material ımm Material ımm U34 UT CuStAg 0.2 PTFE 0.66 Cu 0.86 U47 UT CuAg 0.29 PTFE 0.94 Cu 1.19 U85 UT CuStAg 0.51 PTFE 1.68 Cu 2.20 U141 UT CuStAg 0.91 PTFE 2.98 Cu 3.58 U250 UT CuAg 1.63 PTFE 5.31 Cu 6.35

26 General Specification For Cables RF/MICROWAVE Cable Armor Jacket Braid Dlelectric Center Conductor Nominal Max Max. Powder M17 Desing O.D Max. O.D Max. O.D Max. Dielectric Standing O.D Nom. Impedandce Freq Watts Replacement OHMS GHz At 400MHz Notes RG5B/U D SOLID RG212 RG6A/U D SOLID RG6 RG8A/U S /AWG RG213 RG9B/U D /AWG RG214 RG10A/U S /AWG RG215 RG11A/U S /AWG RG11 RG12A/U S / RG12 RG13A/U D /AWG RG216 RG14A/U D SOLID RG216 RG17/U S SOLID RG218 RG17A/U S SOLID RG219 RG18/U S SOLID RG219 RG18A/U S SOLID RG219 RG19/U S SOLID RG19A/U S SOLID RG20/U S SOLID RG20A/U S SOLID RG21/U D SOLID RG21A/U D SOLID RG22B/U D / MHz 15-RG22 TWIN RG55A/U D SOLID RG223 RG55B/U D SOLID RG223 RG58/U SOLID RG58 RG58A/U /AWG RG58 RG58B/U SOLID RG58 RG58C/U /AWG RG58 RG59/U S SOLID RG59 RG59A/U S SOLID RG59 RG59B/U S SOLID RG59 RG62/U S SOLID RG62 RG62A/U S SOLID RG62 RG62B/U S /AWG RG62 RG63B/U S SOLID RG63 RG71B/U S SOLID RG71 RG82/U D SOLID RG108 RG108A/U S /AWG28 78 RG114/U S SOLID RG114 TWIN RG114A/U S SOLID RG114 RG115/U D / RG115A/U D /AWG RG117/U S SOLID RG211 RG117A/U S SOLID RG211 RG118/U S SOLID RG118A/U S SOLID RG122/U S /AWG RG122 RG141/U SOLID RG303 RG141A/U S SOLID RG303

27 General Specification For Cables RF/MICROWAVE Cable Armor Jacket Braid Dielectric Center Conductor Desing O.D Max. O.D Max. O.D Max. O.D Max. Standing O.D Nom. Nominal Max Max. Powder M17 Impedandce Freq Watts Replacement Notes OHMS GHz At 400Mhz RG142A/U D SOLID RG142 RG142B/U D SOLID RG142 RG143/U D SOLID RG304 RG143A/U D SOLID RG304 RG174/U S /AWG RG174 RG174A/U S /AWG RG174 RG178B/U S /AWG RG178 TG179B/U S /AWG RG179 RG180B/U S /AWG RG180 RG187A/U S /AWG RG188A/U S / RG189U SOLID HELIX(NOM DIMS) RG195/U S / RG195A/U S /AWG RG196/U S / RG196A/U S /AWG RG210/U S SOLID RG210 RG211A/U S SOLID RG211 RG212/U D SOLID RG212 RG213/U S / RG213 RG214/U D / RG214 RG215/U S / RG215 RG216/U D /AWG RG216 RG217/U D SOLID RG217 RG218/U S SOLID RG218 RG219/U S SOLID RG219 RG220U S SOLID RG221/U S SOLID RG222/U D SOLID RG223/U D SOLID RG223 RG224/U D SOLID RG225/U D / RG393 RG228/U S SOLID RG228A/U S SOLID RG301/U S / RG301 RG302/U S SOLID RG302 RG303/U S SOLID RG303 RG304/U D SOLID RG304 RG316U S / RG316 RG389/U SOLID Spline(NOM Dims) RG393/U D / RG393 RG400/U D /AWG RG400 RG401/U SOLID RG401 Semi-Rigid RG402/U SOLID RG402 Semi-Rigid RG403/U D /AWG RG403 RG404/U S /AWG RG404 RG405/U SOLID RG405 Semi-Rigid

28 Detail Specification For Cables RF/MICROWAVE RG/U NUMBER RG-178B/U RG-196A/U RG-188A/U RG-316/U RG-179B/U RG-174A/U NA(RG316DS) M17 NUMBER M17/93-RG178 M M17/ M17/113-RG316 M17/94-RG179 M17/119-RG174 M17/ DIMENSIONS(Inches) Center Conductor Dielectric Outer Concuctor Jacket MATERIA Silver-Coated Silver-Coated Silver-Coated Silver-Coated Silver-Coated Silver-Coated Annealed Copper- Annealed Copper- Annealed Copper- Annealed Copper- Copper-Covered Copper-Covered Annealed Copper- Center conductor Cover Steel Cover Steel Cover Steel Cover Steel Steel Steel Wire Cover Steel Dielectric PTFE Type F-1 PTFE Type F-1 PTFE Type F-1 PTFE Type F-1 PTFE Type F-1 PE Type A-1 PTFE Type F-1 Silver-Coated Silver-Coated Silver-Coated Silver-Coated Silver-Coated Silver-Coated Outer Conductor Copper Wire Copper Wire Copper Wire Copper Wire Copper Wire Tinned Copper Wire Copper Wirel Jacket FEP Type IX FEP Type XIII FEP Type XIII FEP Type IX FEP Type IX PVC Type IIA FEP Type IX CABLE CONSTRUCTION 7 Strands 7 Strands 7 Strands 7 Strands 7 Strands 7 Strands 7 Strands Center Conductor of of of of of of of Dielectric Solid Solid Solid Solid Solid Solid Solid Single-Braid of Single-Braid of Single-Braid of Single-Braid of Single-Braid of Single-Braid of Double-Braid of Outer Conductor AWG 38 AWG 38 AWG 38 AWG 38 AWG 38 AWG 38 AWG 38 WEIGHT(Max.Ibs./100ft) TEMPERATURE RATINGS (MIN. TO MAX., O...) -55 to to to to to to to +200 FREQUENCY(Max.GHz) ATTENUATION(dB/100ft) Frequency(MHz) NA NA NA POWER HANDLING(Watts) Frequency(MHz) NA NA NA 57 NA NA NA 30 NA 45 VSWR(Max.) Frequency(MHz) NA NA NA NA NA NA 1.38 VOLTAGE RATING(Volts RMS) Conitinuous Working Voltage(Max.) Voltage Withstanding(+10%-0%) Corona Extinction Voltage(Min) CHARACTERISTIC IimpedanceOhrms) MINIMUM INSIDE BEND (Radius, In.) VELOCITY OF PROPAGATION (NOM., %) SHIELDING EFFICIENCY, db/ft

29 Detail Specification For Cables RF/MICROWAVE RG/U NUMBER RG-58C/U RG-142B/U RG400/U RG223/U T-Flex405LF T-Flex405HF T-Flex402LF M17 NUMBER M17/28-RG58 M17/60-RG142 M17/128-RG400 M17/84-RG223 NA NA NA DIMENSIONS(Inches) Center Conductor Dielectric Outer Concuctor Jacket MATERIA Tinned Silver-Coated Silver-Coated Silver-Coated Cover Wire Copper Silver-coated Silver-Coated Coppe-Covered Copper-Covered Silver-Covered Center conductor PE Type A-1 Steel Wire Copper Wire Copper Wire Steel Steel Copper Dielectric PTFE Type F-1 PTFE Type F-1 PE Type A-1 PTFE Type F-1 PTFE Type F-1 PTFE Type F-1 Tinned Copper Silver-Coated Silver-Coated Silver-Coated Silver-Coated Silver-Coated Silver-Coated Outer Conductor Wire Copper Wire Wire Copper Wire Copper Copper Copper Jacket PVC Type IIA FEP Type IX FEP Type IX PVC Type IIA FEP FEP FEP CABLE CONSTRUCTION 19 Strands 19 Strands Center Conductor of Solid of Solid Solid Solid Solid Dielectric Solid Solid Solid Solid Single-Braid of Double-Braid of Double-Braid of Double-Braid of Outer Conductor AWG 36 AWG 36 AWG 36 AWG 36 Helical Wrap/braid Helical Wrap/braid Helical WEIGHT(Max.Ibs./100ft) Wrap/Braid TEMPERATURE RATINGS 3.5 (MIN. TO MAX., O...) -40 to to to to to to +125 FREQUENCY(Max.GHz) to +125 ATTENUATION(dB/100ft) 2 Frequency(MHz) NA NA POWER HANDLING(Watts) Frequency(MHz) NA VSWR(Max.) Frequency(MHz) NA NA NA VOLTAGE RATING(Volts RMS) Conitinuous Working Voltage(Max.) Voltage Withstanding(+10%-0%) Corona Extinction Voltage(Min) CHARACTERISTIC 50 IimpedanceOhrms) MINIMUM INSIDE BEND 0.8 (Radius, In.) VELOCITY OF PROPAGATION 70 (NOM., %) SHIELDING EFFICIENCY, db/ft

30 Detail Specification For Cables RF/MICROWAVE RG/U NUMBER.141 Al. jacket.141 Ai. loss.250 Al. jacket LMR200 LMR240 LMR400 LMR600 M17 NUMBER M17/ NA M17/ NA NA NA NA DIMENSIONS(Inches) Center Conductor Dielectric Outer Concuctor Jacket None None None MATERIA Silver Covered Silver Covered Silver Covered Copper Clad Copper Clad Center conductor CopperClad Steel Copper Wire Copper Wire Bare Copper Bare Coppe Aluminum Aluminum Dielectric PTFE Type F-1 Extended PTFE PTFE Type F-1 Foam Poly. Foam Poly. Foam Poly. Foam Poly. Tin Plated Tin Plated Tin Plated Bonded Tape w/tin Bonded Tape w/tin Bonded Tape w/tin Bonded Tape w/tin Outer Conductor Aluminum Tube Aluminum Tube Aluminum Tube Copper Over-braid Copper Over-braid Copper Over-braid Copper Over-braid Jacket None None None UV Protected Poly UV Protected Poly UV Protected Poly UV Protected Poly CABLE CONSTRUCTION Center Conductor Solid Solid Solid Solid Solid Solid Solid Dielectric Solid Extended PTFE Solid Closed cell Foam Closed cell Foam Closed cell Foam Closed Cell Foam Tape Braid Tape Braid Tape Braid Tape Braid Outer Conductor Solid Solid Solid Composite Composite Composite Composite WEIGHT(Max.Ibs./100ft) TEMPERATURE RATINGS (MIN. TO MAX., O...) -40 to to to to to to to +85 FREQUENCY(Max.GHz) ATTENUATION(dB/100ft) Frequency(MHz) POWER HANDLING(Watts) Frequency(MHz) VSWR(Max.) Frequency(MHz) VOLTAGE RATING(volts RMS) Conitinuous Working Voltage(Max.) Voltage Withstanding(+10%-0%) Corona Extinction Voltage(Min) CHARACTERISTIC IimpedanceOhrms) MINIMUM INSIDE BEND (Radius, In.) VELOCITY OF PROPAGATION (NOM., %) SHIELDING EFFICIENCY, db/ft

31 RF/MICROWAVE RG/U NUMBER T-Flex402HF NA(.047SR) RG-405/U.086 Tin Copper.086 AI. jacket RG-402/U.141 Tin Copper M17 NUMBER NA M17/ M17/133-RG405 M17/ M17/ M17/130-RG402 M17/ DIMENSIONS(Inches) Center Conductor Dielectric Outer Concuctor Jacket None None None None None None MATERIAL Silver-Covered Silver-Covered Silver-Covered Silver-Covered Silver-Covered Silver-Covered Silver-Covered Center Conductor Copper Copper Clad Copper Clad Copper Clad Steel Copper Clad Steel Copper Clad Steel Copper Clad Steel Dielectric PTFE Type F-1 Steel Steel PTFE Type F-1 PTFE Type F-1 PTFE Type F-1 PTFE Type F-1 Silver-Coated PTPE Type F-1 PTPE Type F-1 Copper Tubing Tin Plated Outer Conductor Copper Copper-Tube Copper-Tube Tin-Plated Aluminum Tube Copper-Tube Copper-Tubing Jacket FEP None None None None None None CABLE CONSTRUCTION Center Conductor Solid Solid Solid Solid Solid Solid Solid Dielectric Solid Solid Solid Solid Solid Solid Solid Outer Conductor Helical/Wrap/braid Solid Solid Solid Solid Solid Solid WEIGHT(Max.Ibs./100ft) TEMPERATURE RATINGS (MIN. TO MAX., O...) -65 to to to to to to to +125 FREQUENCY(Max. GHz) ATTENUATION(dB/100ft) Frequency(MHz) NA POWER HANDLING(Watts) Frequency(MHz) NA VSWR(Max.) Frequency(MHz) VOLTAGE RATING(Volts RMS) Conitinuous Working Voltage(Max.) Voltage Withstanding(+10%-0%) Corona Extinction Voltage(Min) CHARACTERISTIC Iimpedance (Ohrms) MINIMUM INSIDE BEND (Radius, In.) VELOCITY OF PROPAGATION (NOM., %) SHIELDING EFFICIENCY, db/ft

32 Definitions Definitions / Abbreviations AWG (American wire gage)-a standard system for designating wirediameter Continuous Working Voltage The Designated rms voltage that the cable can support continuously under specified conditions Corona The ionization of surrounding air by high voltage sometimes appearing as a luminous on the color on the surface of a conductor FEP Fluorinated ethylene propylene FEP(Type IX) Extruded, fluorinated ethylene propylene(fep) transparent enough to permit the reading of making tape thought the jacket Form Poly Low Loss, closed cell polyethylene form MIL-C-17 cables, radio frequency, flexible and semi-rigid, general specification. A Military specification approved for use by all departments and agencies of Dept. of Defense. NA Not available. PE Polyethylene PE(Type A-1) Solid polyethylene (PE) conforming to L-P-390, Type 11, class 1, grade 3, low-density type PFA Perfluoroalkoxy PFA(Type XIII) Perfluoroalkoxy(PFA) in accordance with ASTM D-3307, Type 1, having a tensile strength of 3,000lb/(in-in)and a minimum elongation of 275% Power Handling Based on the center conductor temperatures when power is applied versus the temperature rating of the material, Polytetrafluoroethylene. PTFE Solide, extruded polytetrafluoreothylene(ptfe), conforming to ASTM D1457. PTFE(Type F-1) Non-contaminating type of medium-low-temperature, plasticized of compounded, polyvinylchloride(pvc) PVC(Type 11A) or Polyvinylchloride-acetate in accordance with MIL-L-3930, Type JP and colored black Silver-coated Conforming to ASTM B-298, except the thickness of the silver coating shall not less than Copper Clad Steel Wire Inches Silver-Coated Conforming to ASTM B-298, except the thickness of the silver coating shall not less than Copper Wire Inches Tape Braid Composite Aluminum laminated tape bonded to the dielectric with a tinned copper composite over braid UV Protected Poly Black, UV Protected Polyethylene VSWR The ratio between the maximum and the minimum voltage along a transmission line. it is directly related to return loss. VSWR is a scalar quantity giving an indication of transmission line quality. References Haverhill cable & Manufacturing Corp., Haverhill, MA Times Microwave System, Wallingford, CT MIL-C-17 Revision F, National Standard Association, Gaithersburg, MD