Cyanoacrylate Adhesives. Instant assembly. Instant versatility

Transcription

1 Cyanoacrylate Adhesives Instant assembly Instant versatility 1 2 3

2 Choices for instant performance and productivity... flexible bond line, low bloom, low odor, viscosities, and more Known as instant adhesives, Rite-Lok Cyanoacrylate Adhesives offer more than a range of seconds-fast bonding for substrates ranging from metal to plastic, wood to rubber. These liquid and gel formulations give you a wide selection of other properties to help improve production and end use. 3 Super fast curing Low odor High Temperature Bonds plastic riser into lipstick casing Reach handling strength in 5-20 seconds to speed production Reliable assembly of difficult-to-bond plastics and rubbers, and acidic surfaces such as wood, leather, and oily surfaces 4 Superior resistance to high temperature, thermal cycling and shock Engineered Grade 6 5 Rubber-toughened Low blooming/frosting for visual appeal; eliminates chlorosis (white residue at the joint) Reduces need for sophisticated ventilation equipment Flexible 9 Unique polymer maximizes resistance to impact, peel, and thermal cycling Flexible bond lines for bonding flexible and dissimilar substrates 7 Extended resistance to impact, vibration, stress, peel, and humidity Faster curing than rubber-toughened 8 Exceptional performance on difficult-to-bond plastics and rubbers, together or in combination with metals and/or composites Superior performance on PVC, ABS, nylon, EPDM, Santoprene, and Viton

3 Metal Surface Insensitive General Purpose Optimum performance and high strength bonds on metal Bond galvanized, anodized, and other difficult-to-bond metals Two standard viscosities Product Selection Bond rough, porous, contaminated and acidic substrates including wood, cardboard, veneer, fabric, cork and leather Cure fast at low humidity Work where other cyanoacrylates fail Bond a wide variety of substrates Available in wide variety of viscosities Production Aids Primers, activators, and cleaner optimize your productivity Product Typical Use Color Chemical Typical Temperature Time to Full Cure Markets Type Viscosity (cps) Range Handling (hours) Super Fast Cyanoacrylate Adhesives SF20 Optimum performance on Clear Ethyl Hybrid to 180 F 3-30 sec. 24 wide range of rubber and plastic SF100 Fast cure, high strength with EPDM sec. and other elastomers leather working, hand tools, electronics, Low Odor Cyanoacrylate Adhesives LO5 Very low viscosity wicking grade Clear Methoxyethyl 5-65 to 160 F 5-60 sec. 24 (-54 to 71 C) LO100 Low-medium viscosity for close sec. fitting parts Cosmetic cases, appearance-critical applications, black substrates, close-up bonding PR03 Medium-high viscosity for gap filling sec. Rubber-Toughened Cyanoacrylate Adhesives PR80 Low viscosity for close fitting parts Black Ethyl Hybrid 300 Continuous sec to 200 F (-54 to 93 C) Intermittent PR10 High viscosity for gap filling to 225 F sec. (-54 to 107 C) electric motors, hand tools, electronics, Flexible Cyanoacrylate Adhesives PR851 Medium viscosity with some Clear Ethyl Hybrid to 160 F sec. 24 gap filling (-54 to 71 C) hand tools, electronics, Continued next page. Note: This technical information and data should be considered representative only and should not be used for specification purposes.

4 Product Selection (cont.) Product Typical Use Color Chemical Typical Temperature Time to Full Cure Markets Type Viscosity (cps) Range Handling (hours) High Temperature Cyanoacrylate Adhesives HT40 Low viscosity for close fitting parts Clear Ethyl Hybrid 40 Continuous 5-20 sec to 223 F (-54 to 106 C) Intermittent -65 to 250 F (-54 to 121 C) Appliance, electronics, electric motors, automotive, transformers SB98 Medium viscosity with some gap filling 500 Continuous sec. -65 to 210 F (-54 to 99 C) Intermittent -65 to 250 F (-54 to 121 C) HT700 Medium viscosity with some gap filling 700 Same as HT sec. Engineered Grade Cyanoacrylate Adhesives PR5 Very low viscosity wicking grade for Clear Ethyl Hybrid 5-65 to 180 F 1-10 sec. 24 plastics/rubbers PR40 Low viscosity for close fitting sec. plastics/rubber parts electronics, hand tools, SB04 General purpose, low viscosity sec. standard rubber bonder SB14 General purpose, low viscosity sec. plastic bonder PR600 Medium viscosity with some gap filling sec. for plastics/rubbers PR1500 High viscosity for gap filling with sec. plastics/rubbers SB16 General purpose, high viscosity for sec. gap filling PR54 Fast cure, gel viscosity for max gap filling Gel 3-60 sec. Metal Cyanoacrylate Adhesives SB93 Low viscosity to penetrate between parts Clear Methyl 5-65 to 180 F sec. 24 MC100 Multi-purpose metal bonder sec. SB30 Multi-purpose metal bonder sec. Costume jewelry, treated metals, plated metals, metal working Surface Insensitive Cyanoacrylate Adhesives SB20 Very low viscosity wicking grade Clear Ethyl Hybrid 2-65 to 180 F sec. 24 SB95 Low viscosity for close fitting parts sec. SI100 Low-med viscosity for medium gaps sec. Woodworking, luggage and fabric, hobby, costume jewelry, leather SI1500 High viscosity for gap filling sec SI2500 Very high viscosity for gap filling sec. SB22 Very high viscosity for gap filling sec. SB09 Fast cure, gel viscosity for max gap filling Gel 3-60 sec. Note: This technical information and data should be considered representative only and should not be used for specification purposes.

5 Product Selection (cont.) Product Typical Use Color Chemical Typical Temperature Time to Full Cure Markets Type Viscosity (cps) Range Handling (hours) General Purpose Cyanoacrylate Adhesives EC5 Very fast cure for pre-assembled parts Clear Ethyl 5-65 to 180 F 5-15 sec. 24 EC40 General purpose, fast curing sec. EC100 General purpose, fast curing sec. Automotive, general bonding, consumer products, toys, rubber/plastic assembly EC600 Higher viscosity to reduce migration sec. from bond area EC1500 Slower cure for porous materials sec. or gap filling EC2500 Slow cure for porous material or sec. gap filling ECIGEL Industrial strength thixotropic gel for Gel sec. maximum gap filling Cyanoacrylate Primers, Activators, and Debonders AC12 AC68 AC77 AC113 AC452 Cyanoacrylate accelerator with isopropyl alcohol formulation for insensitive plastics, cosmetically critical bond lines, and medical applications. Cyanoacrylate debonder for clean up. Cyanoacrylate polyolefin primer for very fast bonding of difficult-to-bond polyethylene and polypropylene. Cyanoacrylate general purpose accelerator will not attack plastics. Cyanoacrylate acetone-based accelerator flashes off rapidly; excellent adhesion; overspray may attack some plastics. Note: This technical information and data should be considered representative only and should not be used for specification purposes.

6 PRODUCT USE: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user s method of application. WARRANTY AND LIMITED REMEDY: Unless stated otherwise in 3M s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product will be free from defects in material and workmanship at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package insets or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M s and seller s sole obligation will be at 3M s option, to replace the product or refund the purchase price. LIMITATION OF LIABILITY: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Industrial Adhesives and Tapes Division 3M Center Bldg. 21-1W Bush Ave. St. Paul, MN M and Rite-Lok are trademarks of 3M Company. Santoprene is a trademark of Advanced Elastomer Systems. Printed in U.S.A. 3M