FINAL Toxics Substance Reduction Plan Summary for Particulate Matter (PM2.5) 1700 Mitchell Road South

Transcription

1 Toxics Substance Reduction Plan Summary for Particulate Matter (PM2.5) 1700 Mitchell Road South Listowel, ON N4W 3H4 Prepared for: Joan Broughton, Process Quality 1700 Mitchell Road South Listowel, ON N4W 3H4 December 15, 2014 Pinchin File: Pinchin Ltd Milltower Court, Mississauga, ON L5N 7W5

2 EXECUTIVE SUMMARY Listowel Technology Inc. (LTI), located in Listowel, Ontario is a leading manufacturer of plastic molded car parts for a major automotive manufacturer. LTI produces over 120 different car parts and their main processes include injection molding, painting, and final assembly. The company reported to the National Pollutant Release Inventory (NPRI), for the substances particulate matter (PM2.5). The company must also report to the Ontario Ministry of the Environment under the Toxics Substance Reduction plan, O. Reg. 455/09, a plan to reduce the amounts of the reportable toxic substances named above that are used at the facility Pinchin Ltd. Page i

3 TABLE OF CONTENTS 1.0 BASIC FACILITY INFORMATION STATEMENT OF INTENT SUBSTANCES REQUIRING PLANS OBJECTIVES OF THE PLAN & ANY TARGETS OPTIONS TO BE IMPLEMENTED (OR STATEMENT THAT NONE ARE TO BE IMPLEMENTED) CONTENTS OF THIS PLAN SUMMARY REFLECTS PLAN CERTIFICATION BY HIGHEST RANKING EMPLOYEE CERTIFICATION BY LICENSED PLANNER Pinchin Ltd. Page ii

4 1.0 BASIC FACILITY INFORMATION Substance Information Substance CAS # Particulate Matter (PM2.5) NA-M10 Facility Information Company Name Facility Address Site Coordinates (main entrance of site) 1700 Mitchell Road South, Listowel, ON m E, m N; Zone 17 NPRI ID 5894 MOE ID Number of Full-Time Employees in Digit NAICS Code 4-Digit NAICS Code 6-Digit NAICS Code Not Available Manufacturing 3363 Motor Vehicle parts mfg Other motor vehicle parts mfg. Parent Company Information Company Name Moriroku Technology Company Address 18F, Higashi-kan, Shin-Aoyama Building 1-1-1, Percent Ownership by Parent Company Minami-Aoyama, Minato-ku, Tokyo , Japan Company Name 70% Company Address Percent Ownership by Parent Company Greenville Technology 5755 State Route 571, Greenville, OH Pinchin Ltd. Page 1 of 5

5 Facility Contact Information Public Contact Blair Burns Human Resources Manager Phone # X 361 Fax # Blair_burns@listech.on.ca Address: 1700 Mitchell Road, South Listowel, ON N4W3H4 2.0 STATEMENT OF INTENT is a Tier One automotive supplier who manufactures molded and painted plastic parts. They are committed to protect the environment in which they work and comply with all legal and regulatory requirements. They are committed to continually improve the environment through prevention of pollution, conservation of natural resources, and reduction of waste while complying with all legal and regulatory requirements. The creation of particulate matter (PM2.5) is a necessary by-product of the products that we manufacture, and it is not technically or economically feasible to reduce its creation. We will continue to monitor the creation of this substance in strict accordance with all applicable environmental regulations. With reference to the Ontario Toxics Reduction Act, the reduction objectives are outlined in Section 4 of this Plan Summary for the reportable substance. 3.0 SUBSTANCES REQUIRING PLANS The following substance requires a plan particulate matter (PM2.5) based on 2013 Toxics Reduction Act accounting information. This substance is created as a by-product of the facility s operations. 4.0 OBJECTIVES OF THE PLAN & ANY TARGETS prides itself on technological innovation in order to produce high quality products in an environmentally responsible manner. We will strive to reduce the creation of particulate matter (PM2.5) at the facility. Though no options have been identified for implementation at this time, as part of the continuous improvement practices at the facility, technical advances will be monitored for new opportunities to reduce the use of particulate matter (PM2.5) at the facility. 5.0 OPTIONS TO BE IMPLEMENTED (OR STATEMENT THAT NONE ARE TO BE IMPLEMENTED) With the facility s continuous improvement measures, coupled with the acknowledgment that the customer specifies the plastics processed, this means that there are no additional options for the facility 2014 Pinchin Ltd. Page 2 of 5

6 to implement. However, the facility will continue to explore options to install more efficient equipment, and avoid scrap which leads to regrind and rework. 6.0 CONTENTS OF THIS PLAN SUMMARY REFLECTS PLAN This Plan Summary accurately reflects the Toxic Substance Reduction Plans dated December 15, 2014, prepared for the substances listed in Section 1.0 of this Summary Pinchin Ltd. Page 3 of 5

7

8 8.0 CERTIFICATION BY LICENSED PLANNER As of December 15, 2014, I, Ajay Madan, TSRP# 0010 certify that I am familiar with the processes at that use or create the toxic substances referred to below, that I agree with the estimates referred to in subparagraphs 7 iii, iv and v of subsection 4 (1) of the Toxics Reduction Act, 2009 that are set out in the toxic substance reduction plans referred to below for the toxic substances and that the plans comply with that Act and Ontario Regulation 455/09 (General) made under that Act. particulate matter (PM2.5) December 15, 2014 Ajay Madan, TSRP# 0010 Senior Project Engineer Pinchin Ltd. amadan@pinchin.com J:\91000s\91187 ListowelTech,1700Mitchell,Listowel,ENRPT\ ListowelTech,1700Mitchell,Listowel,ENRPT\TRA Planning Report\ Listowel Tech TRA Plan Summary - PM.docx Template: Master Report for Toxics Substance Reduction Summary, ERC, September 16, Pinchin Ltd. Page 5 of 5