Insulation boards produced by GÓR-STAL

Transcription

1 termpir Insulation boards produced by GÓR-STAL

2 00. Get to know the termpir boards Insulation Boards termpir Unbeatable solution for increasing energy e ciency of your building! The Gór Stal insulation boards are resistant to chemicals, fungi, bacteria, rodents. Their undisputed advantage is the fact that they feature low absorption. Thanks to this, the impact of moisture on heat conductivity is substantially lower than it is in case of other types of thermal insulation. Low bulk density and high compression strength make it the ideal material for thermal insulation. In its whole volume the material features tight structure, which influences distinct improvement of the building energy e ciency. Safe for allergy sufferers as they do not contain either substances or elements hazardous for human life or causing undesired effects such as irritations of skin, eyes and respiratory system. Also, they can be recycled and largely reused. The termpir insulation boards are exceptional products which combine modernity with the unique thermal insulation properties, they are nature friendly and fully compatible with the natural environment. After purchase, the termpir boards become the customer's property and the customer can decide about how they make you use of it. None of the domestic or foreign manufacturers have the right to interfere with the method of installation or suggest possible solutions. Also, we do not intend to limit creativity of the Customer and Contractor in respect of the way the boards is used. We will not impose on anyone the parameters of our products as it would be at least unethical. Green architecture

3 01. KINDS of the termpir BOARDS Currently the manufacturer GÓR-STAL offers different kinds of termpir insulation boards of different properties and lining. The standard dimensions of the boards are: 600 x 1200 / 1200 x 2400 [mm] termpir AL The termpir AL insulation boards comprise of a PIR rigid foam a gas tight lining layer composed of aluminium (AL), paper and polyethylene mm λ D = 0,022 E Class termpir AGRO AL The termpir AGRO AL insulation boards comprise of a PIR rigid foam a washable gas tight aluminium foil lining thickness 50 µ m (Agro AL) mm λ D = 0,022 Klasa D-s2,d0 termpir AGRO P The termpir AGRO P insulation boards comprise of a PIR rigid foam a washable gas tight aluminium and polyethylene layer laminate lining mm λ D = 0,022 termpir WS The termpir WS insulation boards comprise of a PIR rigid foam thermal insulation core. The boards are protected with gas-permeable lining from glass reticular fibre (WS) mm λ D = 0,024-0,026

4 termpir WS GK The termpir WS GK insulation boards comprise of a PIR rigid foam gas-permeable lining from glass reticular fibre (WS) and with a plasterboard on one side. Between the termpir board and the plasterboard, there is a thin adhesion layer.* mm λ D = 0,024-0,026 E Class * The standard dimensions of the termpir WS GK board is 1200 x 2600 termpir BWS The termpir BWS insulation boards comprise of a PIR rigid foam thermal insulation core. The boards are protected with gas-permeable lining from glass reticular fibre (WS) on one side and with lining from glass reticular fibre impregnated with bitumen (BT) on the other side mm λ = 0,024-0,026 termpir BT The termpir BT insulation boards comprise of a PIR rigid foam gas-permeable lining from glass reticular fibre impregnated with bitumen (BT) mm λ D = 0,024-0,026 termpir PK The termpir PK insulation boards comprise of a PIR rigid foam gas-permeable lining from Kraft paper (PK) mm λ D = 0,024-0,026 termpir ETX The termpir EXT insulation boards comprise of a PIR rigid foam thermal insulation core. The boards are protected with gaspermeable lining from glass reticular fibre (EXT) mm λ D = 0,024-0,026 E Class

5 PARAMETERS OF THERMAL INSULATION BOARDS Kind of core Apparent core density Rigid polyisocyanurate foam (PIR) ρ = 30 kg/m² Declared heat transfer coe cient for lining λ D = 0,022 W/m*K for termpir AL, termpir AGRO AL, termpir AGRO P, termpir AGRO P λ D = 0,026 W/m*K for thickness d < mm* λ D = 0,025 W/m*K for thickness d < mm λ = 0,024 W/m*K for thickness d mm* D * for other Board facing 1 - gas-tight 2 - gas permeable ź AL¹ - double-sided cladding consisting of aluminum, paper and polyethylene ź AGRO AL¹ - aluminum foil cladding 50 µ thick ź AGRO P¹ - lining made of laminated aluminum and polyethylene ź WS² - fiberglass ź BWS² - on one side a fiberglass, on the other a bitumen lining ź WS GK - protected on both sides with lining from glass reticular fibre (WS) and with a plasterboard on one side ź BT - bitumen lining ź PK² - from kraft paper ź ETX² - lining from glass reticular fibre ź AL GK¹ - protected on both sides with gas-tight lining layer composed of aluminium (New!) Standard panel dimensions [mm] 600 x 1200 / 1200 x 2400 Individual order panel dimensions [mm] 1000 x1200 / 1200 x 1200 / 1200 x 1800 / 1200 x 3000 Joint types [mm] Thermal resistance R [m²k/w] Heat transfer coe (for roofs) cient U [W/m²K] Heat transfer coe cient U [W/m²K] (for walls, for floors) Compression strength at 10% of deformation Classification considering reaction to fire (the board itself) FIT - flat milling, LAP - stepwise milling*, TAG - tongue and groove* Available boards thickness in 10 mm steps ,90¹ 0,75² 0,96¹ 1,12² 0,93¹ 1,09² 1,35¹ 1,15² 0,67¹ 0,78² 0,66¹ 0,76² 1,85¹ 1,55² 0,50¹ 0,59² 0,50¹ 0,58² 2,30¹ 1,90² 0,41¹ 0,49² 0,40¹ 0,48² 2,75¹ 2,30² 0,35¹ 0,41² 0,34¹ 0,40² 3,70¹ 3,20² 0,26¹ 0,30² 0,26¹ 0,30² σ 120 kpa - 20 d N < 30 mm σ 150 kpa - 30 d N 250 mm 4,65¹ 4,00² 0,21¹ 0,24² 0,21¹ 0,24² 5,55¹ 5,05² 0,18¹ 0,19² 0,17¹ 0,19² 6,95¹ 6,30² 0,14¹ 0,16² 0,14¹ 0,15² 8,35¹ 7,55² 0,12¹ 0,13² 0,12¹ 0,13² 9,30¹ 8,40² 0,11¹ 0,12² 0,11¹ 0,12² 10,2¹ 9,25² 0,10¹ 0,11² 0,10¹ 0,11² 11,6¹ 10,5² 0,08¹ 0,09² 0,08¹ 0,09² D - termpir AGRO AL E - self-extinguishing for termpir AL, termpir WS, termpir ETX, termpir WS GK F - termpir BT, termpir PK, termpir AGRO P and termpir BWS Absorptivity [kg/kg] 2,0 %** * dimensions of boards with joint types are 2 to 4 % smaller. Milling: LAP available for the boards from 30 mm, TAG for the boards from 40 mm ** for termpir AL KEY: 1 - for termpir AL, termpir AGRO AL, termpir AGRO P 2 - for others

6 03. APPLICATION OF INSULATION BOARDS Roofs, attics, walls, floors... Pitched roofs, attics The termpir boards are perfect for insulation of roofs, attics, thus eliminating problems of thermal bridges. When looking for light and effective thermal performance for the roof consider choosing termpir solutions. Build Up Roofs-Flat & Green roofs Roofs require insulation against moisture, frost and other weather conditions. The termpir products protect us against problems like moisture and compressive resistance, which is a key factor in flat roofs. TermPIR boards do not absorb water, ensuring the thermal and structural performance is maintained over time. Partition walls Excellent fire performance when exposed to fire, it will not melt or create a hazard for firefighters or exiting occupants. TermPIR WS products recommended for partition walls. We recommend the use of the termpir WS product especially for partition walls. Cavity walls The termpir AL boards provide low emissivity - the aluminium foil facers that cover the board, if applied where cavity air space is present, can claim higher thermal value for the airspace. Floors When it comes to an energy e cient home, the perfect choice for ground floor insulation is the termpir AL boards. They significantly reduce the heat energy loss of a building, hence giving way to a green building. Heated floors Under floor heating requires high performance thermal insulation and thermal conductivity in order to avoid heat energy loss. Light weight, space saving and easy to handle makes termpir AL boards meet that very important task.

7 03. APPLICATIONS OF INSULATION BOARDS Residential and industrial building You will find everything you need within the range of the termpir insulation boards. When fitting thermal insulation in a residential, industrial, cold storage or livestock buildings, termpir boards guarantee obtaining a low heat transfer coe cient of λd=0.022 W/mK and achiving a fast construction. The termpir insulation boards allow for a thinner application of thermal insulation, thanks to which you obtain a larger useful surface area using less material, hence maintaining the heat transfer and decreasing energy costs. You cannot achive these results using traditional materials such as styrofoam or mineral wool. TermPIR boards when applied as thermal i n s u l a t i o n systems p e r fectly m e e t t h e requirements to obtain a thermally e cient building. They have multiple applications used in a wide variety of situations including, but not limited to; pitched roofs, lofts/attics, flat roofs, cavity walls, ETICS, ceilings, floors and foundation walls. APPLICATION OF termpir BOARDS IN ENERGY EFFICIENT BUILDINGS - the board recommended for use - a board that can be used Buildings AL. AGRO AGRO AL P WS WS GK BT PK ETX BWS On rafter insulation system on pitched roofs Residential Under rafter insulation system on pitched roofs Residential Build Up Roofs [BUR] - Flat & Green roofs, mechanically fastened Build Up Roofs [BUR] - Flat & Green roofs, adhesive or glued systems Triple layered external walls - cavity walls Double layered external walls - ETICS system Basement and foundation walls Partition walls Slabs between floors Ground floor slabs Suspended ceilings - high pressure washable livestock, industrial Internal wall insulation existing, historic, stair-cores

8 Factory of termpir Insulation Boards ul. Adolfa Mitery 9, Bochnia tel./fax: Factory of Gorlicka Sandwich Panels ul. Przemysłowa 11, Gorlice tel./fax: