Declaration of performance

Transcription

1 Declaration of performance Solid wood / SH / Unique identification code of the product type: Strength graded structural timber with rectangular cross-section made of spruce, fir, pine, larch or combination of these wood species. 2. Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11 paragraph 4: The production allocation can be taken from the delivery note. 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: Buildings and bridges 4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11 paragraph 5: Schilliger Holz AG Haltikon Küssnacht am Rigi Schweiz 5. Where applicable name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12 paragraph 2: No authorised representative 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System In case of the declaration of performance concerning a construction product covered by a harmonised standard: The notified body [Holzforschung Austria Nr. 1359] has carried out a works initial inspection and the in-works production control in addition to continuous monitoring, assessment and evaluation of the in-works production control, and has issued confirmation of conformity with EU conformity certificate no CPD In case of the declaration of performance concerning a construction product for which a European Technical Assessment: has been issued: Not applicable July 2013 page 1 of 2

2 9. Declared performance: Essential characteristics Performance Harmonised technical specification Module of elasticity (mean value) Bending strength Compressive strength Tensile strength Shear strength Natural durability Reaction fo fire Protective treatment against biological attack C 18 (fir and larch as well as combination of the wood species which are specified in point 1; C16), C24 and C30 in accordance with EN 338 graded to DIN :2008 and allocated to strength class in accordance with EN 1912 Allocation of the supplied timber to strength classes can be taken from the accompanying documents. The respective product dimensions can be taken from the accompanying documents. EN 14081:2011 Natural durability against fungal infestation: Spruce / fir: Durability class 4 in acc. w. EN Pine / larch: Durability class 3-4 in acc. w. EN D-s2, d0 in acc. w. EN 14081, Appendix C NPD 10. The performance of the product identified in points 1 and 2 complies is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Ernest Schilliger, member of the management Küssnacht am Rigi, July 2013 page 2 of 2

3 Declaration of performance Gluelam pine/fir / SHI / Unique identification code of the product type: Laminated timber according to EN 14080: Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11 paragraph 4: The production date can be obtained from the component identification number. 3. Intended use or uses of the construction product, in accordance with the applicable harmonised technical specification, as foreseen by the manufacturer: Buildings and bridges 4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11 paragraph 5: Schilliger Holz-Industrie AG Haltikon Küssnacht am Rigi Schweiz 5. Where applicable name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12 paragraph 2: No authorised representative 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System 1 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard: The notified body [Holzforschung Austria Nr. 1359] has carried out determination of the product type with regard to bonding strength and fire behaviour through an initial test, a works initial inspection and the in-works production control in addition to continuous monitoring, assessment and evaluation of the in-works production control, and has issued confirmation of conformity with EU conformity certificate no CPD In case of the declaration of performance concerning a construction product for which a European Technical Assessment: has been issued: Not applicable July 2013 page 1 of 2

4 9. Declared performance: Essential features Performance Harmonised technical specification Module of elasticity Bending strength Compressive strength Tensile strength Shear strength GL-category and buildup (homogeneous and combined) in accordance with EN 1194 Allocation of the supplied timber to strength classes can be taken from the accompanying paperwork. The respective product dimensions can be taken from the accompanying paperwork. Bonding strength Adhesive type I in acc. w. EN Panel lamellar joints in acc. w. EN 1194 Bonded joints in acc. w. EN 386 EN 14080:2005 Durability Fire behaviour Release of hazardous substances Natural durability against fungal infestation: Spruce / fir: Durability class 4 in acc. w. EN D-s2, d0 in acc. w. EN 14080, Appendix E Formaldehyde emission class E 1 in acc. w. EN The performance of the product identified in points 1 and 2 complies is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Ernest Schilliger, member of the management Küssnacht am Rigi, July 2013 page 2 of 2

5 Declaration of performance GFP / SHI / Unique identification code of the product type: Schilliger Grossformatplatte GFP according to ETA- 08/ Type, batch or serial number or any other element allowing identification of the construction product as required pursuant to Article 11 paragraph 4: The production date can be obtained from the component identification number. 3. Intended use or uses of the construction product, in accordance to ETA 08/0238, as foreseen by the manufacturer: Buildings 4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required pursuant to Article 11 paragraph 5: Schilliger Holz-Industrie AG Haltikon Küssnacht am Rigi Schweiz 5. Where applicable name and contact address of the authorised representative whose mandate covers the tasks specified in Article 12 paragraph 2: No authorised representative 6. System or systems of assessment and verification of constancy of performance of the construction product as set out in Annex V: System 1 7. In case of the declaration of performance concerning a construction product covered by a harmonised standard: Not applicable 8. In case of the declaration of performance concerning a construction product for which a European Technical Assessment: has been issued: The notified body [Holzforschung Austria Nr. 1359] has carried out determination of the product type with regard to bonding through an initial test, a works initial inspection and the in-works production control in addition to continuous monitoring, assessment and evaluation of the inworks production control, and has issued confirmation of conformity with EU conformity certificate no CPD Juli 2013 Seite 1 von 2

6 9. Declared performance: Essential features Performance European Technical Assessment (ETA) Module of elasticity Bending strength Compressive strength Tensile strength Shear strength The mechanical properties are given directly in the ETA-08/0238 annex 2 and have to be applied to the calculation method as displayed in the ETA-08/0238 annex 3. Structure: at least 3 layers, 90 running turn bonded Maximum product dimensions (l x b x h): x x 500mm The respective product dimensions can be taken from the accompanying paperwork. Bonding strength Adhesive type I in acc. w. EN Durability Natural durability against fungal infestation: Spruce: Durability class 4 in acc. w. EN Larch: Durability class 3-4 in acc. w EN ETA-08/0238 Service classes: Fire behaviour Release of hazardous substances Service classes 1 and 2 in accordance with Eurocode 5 D-s2, d0 Formaldehyde emission class E1 10. The performance of the product identified in points 1 and 2 complies is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. Signed for and on behalf of the manufacturer by: Ernest Schilliger, member of the management Küssnacht am Rigi, Juli 2013 Seite 2 von 2