Stramit. Building Products. Western Australia. Roofing Walling Rainwater Structural Products

Transcription

1 Roofing Walling Rainwater Structural Products Stramit Building Products Western Australia METROPOLITAN Telephone (08) Facsimile (08) COUNTRY Telephone Facsimile (08)

2 Roofing & Walling Stramit Speed Deck Ultra Stramit Speed Deck Ultra decking is a revolutionary concealed fixed roof decking system with unrivalled wind load performance. The wide 700mm cover and unique fulllength clip rails provide speed of installation and automatic bird-proofing at all fixing points. The minimum roof pitch of 1 degree allows for a diverse range of design options. 43mm BMT mm ( + 4mm) Cover ROOF SPAN (INT/END)* 2100/ /2250 MIN PITCH 1 o 1 o Available in the full colour range Stramit FarLap Roof Lap System Stramit Farlap units are a unique low profile sealing assembly designed exclusively for lap joints of Stramit Speed Deck Ultra decking. These easy-to-install snap on units provide an ideal solution for long run lengths and restricted access sites. Corrugated Corrugated sheeting is a traditional profile available in a range of colours. With wide cover for quick installation and easy handling, plus a minimum 5 pitch, Corrugated sheeting suits traditional and contemporary roof designs. 16mm BMT mm ( + 4mm) Cover ROOF SPAN (INT/END)* 1200/ /1200 MIN PITCH 5 o 5 o Stramit Monoclad Stramit Monoclad cladding combines economy and practicality with modern design to produce a lightweight, attractive roof and wall profile. The deep ribs provide excellent spanning and high water carrying capacity. The minimum roof pitch of 2 allows for a diverse range of design options. 29mm BMT mm ( + 4mm) Cover ROOF SPAN (INT/END)* 1700/ /1900 MIN PITCH 2 o 2 o Longspan Stramit Longspan cladding is a good looking, long spanning, high strength roof and wall sheet. Conventional pierce-fixing with only four fasteners per sheet maximises performance and speeds up installation. Minimum roof pitch of 1.5 saves on supporting structure and provides design flexibility. 27mm 700mm ( 4mm) Cover BMT ROOF SPAN (INT/END)* MIN PITCH / /

3 Roofing & Walling Stramit K-Panel 12mm BMT mm ( 4mm) Cover WALL SPAN (INT/END)* 1500/ /1400 Stramit K-Panel cladding is a low-cost, easy-fix cladding with a broad 864mm cover and low rib height, making it ideal for garage doors, soffit linings, fascias and other cladding applications. Not suitable for roofing. Maximum recommended length 6.0m. 6mm 825mm ( 6mm) Cover BMT WALL SPAN (INT/END)* PERFORATED SPAN / / /900 Stramit Mini Corry Stramit Mini Corry cladding is an economical and attractive feature panel suitable for walls, awnings, ceilings, soffits and many other applications. Not suitable for roofing. Maximum recommended length 6.0m. 4mm 850mm Cover (with overlap side laps) 900mm Cover (with edge side laps) BMT WALL SPAN (INT/END)* /1000 Stramit Minirib Stramit Minirib cladding is a low-cost ribbed panel suitable for internal wall linings, fascias, eaves, transport siding and transportable buildings. Not suitable for roofing. Maximum recommended length 6.0m. 850mm Cover BMT WALL SPAN (INT/END)* /1000 Stramit Miniseam Interlocking Cladding This low-profile wall cladding combines the costeffectiveness of the established Minirib profile with an elegant edge location. The interlocking ends provide an unobtrusive finish that is ideal for economical low-rise buildings. 290mm ( 4 cover) 43mm Stramit Sunset Patio Roof Panels Designed specially for the home improvement market to make it easy to create stylish verandas, patios, barbecue areas and carports. The unique design gives the underside of the roof a continuous surface to keep out dust, while the interlocking panels provide strength and a weathertight seal. This integrated patio roof system can be supplied with beams and accessories such as gutters, flashing and downpipes, as well as translucent panels in opal shade for natural lighting. Available ex East. Girts Promina 60 Spacing Batten Side Stramit Uniguard Fire Resisting Wall Superior fire rated wall cladding system combining single layer of specialist fireboard Promina 60 with choice of steel cladding products. Suitable as external wall system for single storey Class 7b and 8 buildings of Type C construction. Note: Promina 60 board cannot be purchased independently of other Stramit Uniguard wall system components. Monoclad * Roof spans shown are for normal residential conditions and must not exceed those for N2 wind conditions as defined in AS

4 Rainwater Products Stramit Easiline Commercial Gutter A high front, square gutter with large water carrying capacity. Stramit Easiline Commercial Gutter is ideal for flat roofs, garages and sheds. Available in ZINCALUME finish and the full range of COLORBOND colours. 85mm 25mm 140mm 125mm Stramit Easiline Patio Gutter Stramit Easiline Patio Gutter is an ideal gutter for home improvements and patios. It has an attractive square profile and a reverse lip that fits on to patio tube, RHS or framing for new installations. Available in ZINCALUME and the full range of COLORBOND colours. 70mm 115mm 109mm Stramit Easiline Domestic Gutter Another attractive square profiled gutter that is ideal for home improvements. The reverse lip can be tabbed and folded out, providing maximum versatility when replacing existing guttering. Available in ZINCALUME and the full range of COLORBOND colours. 70mm 28mm 115mm 109mm Stramit Trad-line Gutter This gutter has a traditional colonial style appearance and is compatible with Stramit Strongline Fascia. Available in both slotted and unslotted in ZINCALUME and the full range of COLORBOND colours. 60mm 89mm 107mm 4

5 Rainwater Products 21mm 177mm 31mm 100mm 37mm Stramit Strongline Fascia Stramit Strongline Fascia is a stepped fascia made from high-tensile steel developed specifically for use in the West. The step in the fascia makes it easy to attach Stramit Trad-Line Gutters and provides continuous support. The combination is an attractive fascia-gutter solution that is always straight and true. Comes in ZINCALUME and the full range of COLORBOND colours. Downpipes Rectangular: Standard sizes 95mm x 45mm, 100mm x 50mm and 100mm x 75mm. Also available in 75 x 50, 100 x 100 and 150mm x 100mm in a range of standard lengths. Round: Standard sizes 75mm and 100mm only. Both downpipe styles are complemented by a range of accessories including straps, nozzles, offsets and rainwater heads. Available in all finishes. 350mm 140mm Roll Top Ridge A very attractive product for the roof ridge, available in ZINCALUME and the full range of COLORBOND colours. 69mm 60mm 350mm Stepped Roll Top Ridge Stepped Roll Top Ridge has a narrower profile than Stramit Roll Top Ridge and is stepped to add visual interest as well as strength. Also available in ZINCALUME and the full range of COLORBOND colours. 190mm 190mm Valley Gutter Available in the full range of colours to match your preferred roof sheeting. Flashing Range Stramit Building Products has a range of flashing, barge caps, corner trims and foot moulds to enhance any gutter or roofing profile and any architectural style. All available in ZINCALUME and COLORBOND. Available cut to length up to 8.0m. 5

6 Structural Products C&Z Purlins Stramit Building Products offers a full range of purlins, including 100, 150, 200, 250, 300, 350 and 400 series in both C and Z profiles. Downturn Lip in C & Z profiles in 150, 200 and 250 sizes and Stramit Exacta Z-purlins in 150 to 350 sizes for use as roof purlins or wall girts, all cut to length. Heavy duty Z350 Galvaspan coating ensures long-term protection. Stramit Building Products also offers a snap-in purlin bridging system for quick installation. Punched and Unpunched available Stramit Condeck HP Permanent metal formwork for suspended concrete slabs. Stramit Condeck HP steel decking is supplied to site cutto-length for speedy installation. Saves on formwork and provides a ready-finished ceiling. Edgeform available in various sizes up to 8.0m long. 300mm 55mm Lightweight Structural Sections Stramit manufactures a range of lightweight Framing Sections for domestic roofing, garages, sheds, partitioning, etc. These include Roof and Ceiling Battens, Top Hats, Stud Sections, Cyclone rated Roof Battens and Patio Beams. Battens Roof and Ceiling Battens are available as 50mm Roof Battens, 25mm Ceiling Battens and 40mm Tile Battens in stock lengths. Roof Batten 50mm Ceiling Batten 24mm Wall Framing wall framing includes plate, stud, nogging and crimped stud sections. Nogging Stud Plate Steel Floor Framing The system combines structural members with Steel-MAX brackets and accessories. steel floor framing offers significant savings through its simplicity and speed of installation. Now you can order a complete steel sub-flooring package, individually designed, engineered, certified, and delivered with all required components. 6

7 Fencing Products Post Ball Fence Post Post Cap Fence Rail Standard Lattice Sawtooth Infill Sheet Modular Steel Fencing Steel Fencing is made from high quality steel in a wide range of designer colours to suit any home, garden or lifestyle. Stramit Fencing is available in traditional and sawtooth profiles, requires low maintenance and is fire and termite resistant. Plinth. Gates. New profiled post. SmartSlat 2-piece Louvre Offset Bracket SmartSlat Louvres Durable, attractive slats and louvres. Unique two-part design conceals the fasteners. SmartSlat louvres come in three widths and are ideal for fences, gates, sunshades, garden features, fixed louvre panels and more. Strong steel construction resists impact and denting. Custom Products 600mm 70mm Flumes Gas Flumes and Cowls are available in ZINCALUME finish and the full range of COLORBOND colours to match the roof sheeting. To ensure an ideal fit, the pitch of the roof should be specified when ordering. 150mm Rainheads Square Rainwater Heads are available in stock sizes or to order. Contact your local Stramit sales office for details of sizes, or with your special requirements. Nozzle size and position must be specified when ordering. Rainwater Heads are available in ZINCALUME and COLORBOND finishes. Sumps Contact your local Stramit sales office for a range of sizes, or with your special requirements. Rolled Barge Why settle for flat edges when you can finish your roof with an attractive Edge Roll or Rolled Barge? They add the perfect touch of authenticity to traditional and heritage buildings and also look great on modern roofs. Available made to order in your preferred shape in COLORBOND and ZINCALUME, cut to length. * Drainage from one material into another can cause premature corrosion. Please check with your nearest Stramit office for details. 7

8 Premium finishes Standard colours COLORBOND Ultra Steel COLORBOND Steel Colour Range Surfmist Woodland Grey Manor Red Cottage Green Dune Monument Jasper Deep Ocean Windspray Wallaby Classic Cream Ironstone COLORBOND Stainless Steel Surfmist Monument Surfmist Windspray Paperbark Basalt Dune Deep Ocean Dune Cove COLORBOND Metallic Steel Aries Astro Shale Grey Gully Windspray Mangrove Rhea Cosmic Galactic Celestian Evening Haze Night Sky Woodland Grey Terrain Many colours and finishes are kept in stock for fast manufacture and delivery. However, some colours and finishes require longer lead times and, in some cases, minimum order quantities. Check with your Stramit Building Products representative before ordering. Note that not all products are available in all finishes. Pale Eucalypt Wallaby Distributed by: The COLORBOND prepainted steel colours shown in this brochure have been reproduced to represent actual product colours as accurately as possible. However we recommend checking your chosen colour against an actual sample of the product before purchasing as varying light conditions and limitations of the printing process affect colour tones. Trademarks of Stramit Corporation Pty Limited ABN Trading as Stramit Building Products. A member of the Fletcher Building Group. COLORBOND ZINCALUME GALVASPAN and COLORBOND Colour Names are trademarks of BlueScope Steel Limited. Stramit Corporation Pty Limited, March