High performance solutions in waterproofing

Transcription

1 High performance solutions in waterproofing MEMBRANE PRODUCT CATALOG

2

3 ABOUT US Our company, which has been an active player in the Turkish construction chemicals market for more than 20 years and continuing its business activities since 2011 as BAUMERK Construction Chemicals, is preparing to enter global market with its highly-sought-after premium quality products. The company, whose product portfolio contains construction chemicals and bitumen-based membrane products, added construction paint products to its product range in 2015, uniting all the requirements of the construction market under a single brand. BAUMERK enriches its customers with wide array of unique and innovative products ranging from basic construction materials through customized products to system solutions under 20 different product groups contains up to 150 products. The primary business focus of BAUMERK, which has set out on this path to Change the Chemistry of the Structure, is to provide top-quality service to more than 1000 customers in more than 55 countries, responds quickly and rapidly to customer demands and add value to its customers with tailored pre and after sales services. Investing in Research and Development activities conducted in a m 2 production facility in Hadımköy, and providing a valuable technical support to its customers, BAUMERK stands out as a pioneering construction company that adds value to the Turkish and Global Construction Sector. OUR VISION Becoming a global, eminent and highly-valued brand associated with providing the most efficient industrial solutions. OUR MISSION Understanding the needs of the customers, providing quick, reliable, quality and environmental friendly service and making the BAUMERK brand a symbol of quality and trust.

4

5 APP Modified, Bituminous Waterproofing Membrane SBS Modified, Bituminous Waterproofing Membrane APP or SBS Modified, Bituminous, Anti-Root Membrane APP Modified, Bituminous Waterproofing Membrane for Bridge and Viaducts Self-Adhesive Membrane

6 04

7 APP MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE Description It is APP (Atactic Polypropylene) modified, torch-on plastomeric waterproofing membranes with fiberglass or non-woven spunbond polyester felt; both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones). Fields of Application It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tanks, manmade ponds, retaining walls, concrete channels as well as bathrooms and any wet surfaces. Features and Benefits Flexible and long lasting. Applicable on different kind of surfaces. Has high elongation and tensile strength. Resistant to aggressive effect of the soil. Easily applied to the details of dilation, edges of chimney and parapet returns etc. Surface Preparation Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet. It is recommended to use the B PR 100 as a primer on the application surface for accomplish application. Application 10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be aid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest. 05

8 APP MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE -5 C Series Technical Specifications SPECIFICATION UNIT C 2000 C 3000 C 4000 P 3000 P 4000 P 40 K - P 40 Y P 50 K - P 50 Y C 3000 AL P 3000 AL P 4000 AL P 3000 S P 4000 S P 40 G - P 40 W P 50 G - P 50 W Reinforcement - Fiberglass Fiberglass Fiberglass Polyester Polyester Polyester Polyester Fiberglass Polyester Polyester Modified - APP APP APP APP APP APP APP APP APP APP Thickness mm (±0,2) Flow Resistance C >110 >110 >110 >110 >110 >110 >110 >110 >110 >110 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 300/ / / / / / / / / /400 Elongation at Break (MD/CMD) % 2/2 2/2 2/2 30/30 30/30 30/30 30/30 2/2 30/30 30/30 Upper Surface Coating - PE PE PE PE/Sand PE/Sand Slated Slated AL AL AL Sub Surface Coating - PE PE PE PE PE PE PE PE PE PE Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10-10 C Series Technical Specifications SPECIFICATION UNIT C 2000 C 3000 C 4000 P 3000 P 4000 P 40 K - P 40 Y P 50 K - P 50 Y C 3000 AL P 3000 AL P 4000 AL P 3000 S P 4000 S P 40 G - P 40 W P 50 G - P 50 W Reinforcement - Fiberglass Fiberglass Fiberglass Polyester Polyester Polyester Polyester Fiberglass Polyester Polyester Modified - APP APP APP APP APP APP APP APP APP APP Thickness mm (±0,2) Flow Resistance C >120 >120 >120 >120 >120 >120 >120 >120 >120 >120 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 400/ / / / / / / / / /600 Elongation at Break (MD/CMD) % 2/2 2/2 2/2 35/35 35/35 35/35 35/35 2/2 35/35 35/35 Upper Surface Coating - PE PE PE PE/Sand PE/Sand Slated Slated AL AL AL Sub Surface Coating - PE PE PE PE PE PE PE PE PE PE Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10 W (WHITE) G (GREY) K (RED) Y (GREEN) Polyethylene Film PE Aluminum Foil AL PE Film 2 APP Modified Bitumen 3 Polyester Felt or Fiberglass 4 APP Modified Bitumen 5 PE Film, Slated, Silica Sand or Aluminum Foil 06

9 APP MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE W Series Technical Specifications SPECIFICATION UNIT WF 2000 WF 3000 WP 3000 WP 4000 WP 40 K - WP 40 Y WP 40 G - WP 40 W WF 3000 AL WP 3000 AL Reinforcement - Fiberglass Fiberglass Polyester Polyester Polyester Fiberglass Polyester Modified - APP APP APP APP APP APP APP Unit Weight kg/m Flow Resistance C >110 >110 >110 >110 >110 >110 >110 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 300/ / / / / / /400 Elongation at Break (MD/CMD) % 2/2 2/2 30/30 30/30 30/30 2/2 30/30 Upper Surface Coating - PE PE PE PE Slated AL AL Sub Surface Coating - PE PE PE PE PE PE PE Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 1x10 1x10 S-line Series Technical Specifications SPECIFICATION UNIT C 2000 C 3000 P 3000 P 4000 P 40 K - P 40 Y P 40 G - P 40 W Reinforcement - Fiberglass Fiberglass Polyester Polyester Polyester Modified - APP APP APP APP APP Unit Weight kg/m 2 2,4 3,6 3,6 4,5 4,5 Flow Resistance C >110 >110 >110 >110 >110 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 300/ / / / /400 Elongation at Break (MD/CMD) % 2/2 2/2 30/30 30/30 30/30 Upper Surface Coating - PE PE PE PE Slated Sub Surface Coating - PE PE PE PE PE Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 W (WHITE) G (GREY) K (RED) Y (GREEN) Polyethylene Film PE Aluminum Foil AL PE Film 2 APP Modified Bitumen 3 Polyester Felt or Fiberglass 4 APP Modified Bitumen 5 PE Film, Slated or Aluminum Foil 07

10 08

11 SBS MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE Description It is SBS (Styrene Butadiene Styrene) modified, torch-on elastomeric waterproofing membranes with fiberglass or non-woven spunbond polyester felt; both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones). Fields of Application It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tanks, manmade ponds, retaining walls, concrete channels as well as bathrooms and any wet surfaces. Features and Benefits Applicable on different kind of surfaces at cold temperature because of high elastic property. Has high elongation and tensile strength. Resistant to aggressive effect of the soil. Easily applied to the details such as dilation, edges of chimney and parapet returns. Surface Preparation Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. Recommended to use B PR 100 Bitumen Primer is used as a primer before the application of membrane to accomplish finish. Application 10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be laid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest. -20 C Series Technical Specifications SPECIFICATION UNIT EC 2000 EC 3000 EC 4000 EP 3000 EP 4000 EP 40 K-EP 40 Y EP 50 K-EP 50 Y EC 3000 AL EP 3000 AL EP 4000 AL EP 3000 S EP 4000 S EP 40 G-EP 40 W EP 50 G-EP 50 W Reinforcement - Fiberglass Fiberglass Fiberglass Polyester Polyester Polyester Polyester Fiberglass Polyester Polyester Modified - SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS Thickness mm (±0,2) Flow Resistance C >100 >100 >100 >100 >100 >100 >100 >100 >100 >100 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 400/ / / / / / / / / /600 Elongation at Break (MD/CMD) % 2/2 2/2 2/2 35/35 35/35 35/35 35/35 2/2 35/35 35/35 Upper Surface Coating - PE PE PE PE/Sand PE/Sand Slated Slated AL AL AL Sub Surface Coating - PE PE PE PE PE PE PE PE PE PE Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10 W (WHITE) G (GREY) K (RED) Y (GREEN) Polyethylene Film PE Aluminum Foil AL PE Film 2 SBS Modified Bitumen 3 Polyester Felt or Fiberglass 4 SBS Modified Bitumen 5 PE Film, Slated, Silica Sand or Aluminum Foil 09

12 10

13 APP or SBS MODIFIED, BITUMINOUS, ANTI-ROOT MEMBRANE Description It is APP (Atactic Polypropylene) or SBS (Styrene Butadiene Styrene) modified, special anti-root additives content, torchon plastomeric or elastomeric waterproofing membranes with non-woven spunbond polyester felt; both sides are coated with polyethylene film. Fields of Application It can be applied to structural details of gardens, terraces and terrace roofs, and it eliminates the risk that plant roots damage through the waterproofing coating. Features and Benefits Flexible and long lasting. Easy to applied on different kind of substrates. Has high elongation and tensile strength. Resistant to aggressive effect that may come from the soil. Easy to applied on dilatation, edge of chimney and parapet returns. Surface Preparation Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. Before the application B PR 100 Bitumen Primer is applied as a primer to obtain better finish. Application 10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be laid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest. Green Series Technical Specifications SPECIFICATION UNIT P 3000 P 4000 EP 3000 EP 4000 Reinforcement - Polyester Polyester Polyester Polyester Modified - APP APP SBS SBS Thickness mm (±0,2) Flow Resistance C >120 >120 >100 >100 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 800/ / / /600 Elongation at Break (MD/CMD) % 35/35 35/35 35/35 35/35 Upper Surface Coating - PE PE PE PE Sub Surface Coating - PE PE PE PE Roll size (Width x Length) m 1x10 1x10 1x10 1x10 Polyethylene Film PE 1 Soil or Plant 2 Geotextile 3 Drain Dimple Board 4 Green Series Membrane 5 B PR 100 Bitumen Primer 6 Leveling concrete 7 Concrete PE Film 2 APP or SBS Modified Bitumen 3 Polyester Felt 4 APP or SBS Modified Bitumen 5 PE Film

14 12

15 APP MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE FOR BRIDGE and VIADUCTS Polyethylene Film Description It is APP (Atactic Polypropylene) modified plastomeric waterproofing membrane with non-woven spunbond polyester felt; both sides are coated with polyethylene film or silica sand; suitable use in bridge, viaducts and roads. Fields of Application In bridge, road and viaducts for waterproofing purposes. Features and Benefits Flexible and long lasting. Applicable on different kind of surfaces. Has high elongation and tensile strength. Resistant to aggressive effect of the soil. Easily applied to the details of dilation, edges of chimney and parapet returns etc. PE PE Film 2 APP Modified Bitumen 3 Polyester Felt 4 APP Modified Bitumen 5 PE Film or Silica Sand Surface Preparation Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. It is recommended to use the B PR 100 as a primer on the application surface for accomplish application. Application 10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be laid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest. Viaducts Series Technical Specifications SPECIFICATION UNIT P 4000/P 4000 S P 5000/P 5000 S Reinforcement - Polyester Polyester Modified - APP APP Thickness mm (±0,2) 4 5 Flow Resistance C >120 >120 Cold Bending C Tensile Strength (MD/CMD) N/5 cm 1000/ /800 Elongation at Break (MD/CMD) % 40/40 40/40 Upper Surface Coating - PE/Sand PE/Sand Sub Surface Coating - PE PE Roll size (Width x Length) m 1x10 1x8 13

16 14

17 SELF-ADHESIVE MEMBRANE Description It is a bituminous, SBS and special additives content, highly flexible, self-adhesive and long-lasting waterproofing membrane with fiberglass or non-woven spunbond polyester felt that one side is covered with polyethylene film and other side has peelable polypropylene. Fields of Application In terraces and sloping concrete roofs. In light metal roofs as a first layer insulation membrane. Suitable for cold temperature application, used a first layer in all kind of flexibility required surfaces for waterproofing purposes or in heat insulation layers (XPS - EPS). Adhere on different kind of surfaces such as wood, plastic, glass, concrete etc. with this feature can be used on walls, parapets, chimneys, eaves, in the roof cracks, insulation coating of deck of boat, automotive industry etc. Features and Benefits Easy to applied, flexible and long lasting. Self-adhesive. Easy to applied on different kind of substrates. Has high elongation and tensile strength. Resistant to aggressive effect that may come from the soil. Easy to applied on dilatation, edge of chimney and parapet returns. Applicable at low temperature. Surface Preparation Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. Surface must be clean and dry for obtaining well adhesion. Before the application B PR 100 Bitumen Primer is applied on concrete and after curing of primer, Self Membrane is adhered on dry surface. Application Self Membrane is ready to use after peel off the film on it. Polyethylene Film Polypropylene Film PE PP Removable Film 2 SBS Modified Bitumen 3 Fiberglass or Polyester Felt 4 SBS Modified Bitumen 5 PE Film Self Membrane Technical Specifications SPECIFICATION UNIT SELF F-1000 SELF F-1500 SELF F-2000 SELF P-1500 SELF P-2000 SELF P-3000 SELF P-4000 Reinforcement - Fiberglass Fiberglass Fiberglass Polyester Polyester Polyester Polyester Modified - SBS SBS SBS SBS SBS SBS SBS Thickness mm (±0,2) 1,0 1,5 2,0 1,5 2,0 3,0 4,0 Flow Resistance C Cold Bending C Tensile Strength (MD/CMD) N/5 cm 300/ / / / / / /600 Elongation at Break (MD/CMD) % 2/2 2/2 2/2 30/30 30/30 35/35 35/35 Upper Surface Coating - PE PE PE PE PE PE PE Sub Surface Coating - PP PP PP PP PP PP PP Roll size(width x Length) m 1x20 1x15 1x15 1x15 1x15 1x10 1x10 15

18 NOTES

19

20 MEMBRANE PRODUCT CATALOG Baumerk Yapı ve Kimya San. Tic. Ltd. Şti. Dursunköy Mah. Uygur Cad. No: Hadımköy-Arnavutköy-İstanbul/TÜRKİYE T F info@baumerk.com