Super Erecta Wall Mount Technical Data T10.40 TIM CAMPBELL

Transcription

1 Wilkes-Barre, PA Super Erecta Wall Mount Technical Data T10.40

2

3

4

5

6

7 Finish Temp. Abrasion Chip Res. Nickel Chrome Brite Metroseal II Stainless Designer Very Good Very Good Application Chart SES Wall Mount Shelving Excellent Corrosion (Salt Spray) Very Good Cut Through N/A Very Good Fair N/A Excellent Excellent Excellent Excellent Cart Wash Not Recommended Not Recommended Not Recommended Finish Warranty NSF Listed 1 Year Yes 1 Year Yes 10 Years Yes Excellent Excellent Excellent N/A Excellent 1 Year Yes Good Fair Good Fair Not Recommended 1 year No FINISH/PLATING REF. Chrome Multi-layer coating consisting of a single layer of bright nickel, a thin layer of chromium, and an organic laquer top coat. Super Brite A single layer coating consisting of clear chromate zinc plating, with an organic laquer top coat. Metroseal II - corrosion resistant finish in a multi-layer coating consisting of a cross-linked thermoset Organic coating which displays superior abrasion, gouge, and chemical resistance. The intermediate layer is chromate conversion coated zinc plating. Stainless Steel Type 304 stainless steel, a low carbon non-magnetic austenitic stainless steel with electropolish finish, which facilitates passivation of the metal for enhanced corrosion resistance.

8 SES WALL MOUNT SHELVING CHEMICAL RESISTANCE Nickel Chrome Stainless Steel Super Brite Metroseal II Designer (Epoxy) ACID, INORGANIC RANK RANK RANK RANK RANK Hydrochloric acid (37%) Nitric acid (10%) Nitric acid (70%) Phosphoric acid (10%) Phosphoric acid (85%) Sulfuric acid (10%) Sulfuric acid (30%) Sulfuric acid (98%) ACID, ORGANIC Acetic acid (5%) Acetic acid (50%) Acetic acid (glacial) Citric acid (10%) Oleic acid ALCOHOL Ethanol Isopropyl (2-propanol) Methanol ALDEHYDE Formaldehyde (37%) AMIDE Dimethyl formamide (DMF) BASE Ammonium Hydroxide Sodium Hydroxide CLEANING MATERIAL Ammonia Bleach Detergent Quaternary Ammonia Commercial Compound Anti-freeze SES WALL MOUNT SHELVING CHEMICAL RESISTANCE Nickel Chrome Stainless Steel Super Brite Metroseal II Designer (Epoxy) ESTER RANK RANK RANK RANK RANK Dioctyl phthalate (DOP) ETHER Ethyl ether FOODSTUFF Orange juice Salad oil Vegetable oil Vinegar HALOGEN Carbon tetrachloride Chlorine Freon Methylene Chloride Perchloroethylene Trichloroethylene HYDROCARBON, ALIPHATIC Kerosene HYDROCARBON, AROMATIC Benzene Naptha Toluene HYDROCARBON, COMMON Brake fluid Diesel fuel Engine oil Gasoline Grease Hydraulic fluid Turpentine KETONE Acetone Methyl ethyl ketone (MEK) ORGANIC COMPOUND Hydrogen peroxide (30%) Load Ratings: Post Type Wall Mount: Not to exceed 250 lbs. (113 kg.) total per shelf system regardless of the number of shelf tiers. Direct Wall Mount: Not to exceed 200 lbs. (91 kg.) total per shelf system.

9 Key To Ranking Chemical Resistance 1. Excellent For use under normal conditions. 2. Acceptable Long term exposure under severe conditions (high temperature, stress, etc.) may cause loss of mechanical properties or appearance. 3. Marginal For use only where significant loss of mechanical properties or appearance is acceptable. 4. Do not use Causes severe degradation. NOTE: All ratings are based on standard product operating temperatures as defined in the product application chart. A resistance rating of 1 or 2 is considered to be within acceptable limits of the product and should not be cause for concern.