CAMPUS Datasheet. Ultramid A3X2G5 - PA66-GF25 FR BASF
|
|
- Melinda Harper
- 5 years ago
- Views:
Transcription
1 CAMPUS Datasheet Product Texts Glass fibre reinforced injection moulding grade with improved flame retardance based on red phosphorus, giving outstanding mechanical and electrical properties for components requiring high stiffness Rheological properties dry / cond Unit Test Standard Melt volume-flow rate, MVR 3 / * cm³/1min ISO 1133 Temperature 275 / * C ISO 1133 Load 5 / * kg ISO 1133 Molding shrinkage, parallel.4 / * % ISO 294-4, 2577 Molding shrinkage, normal 1. / * % ISO 294-4, 2577 Mechanical properties dry / cond Unit Test Standard Tensile modulus 8 / 6 MPa ISO 527-1/-2 Stress at break 14 / 1 MPa ISO 527-1/-2 Strain at break 3 / 4.5 % ISO 527-1/-2 Tensile creep modulus, 1h * / 35 MPa ISO Charpy impact strength, +23 C 65 / 7 kj/m² ISO 179/1eU Charpy impact strength, -3 C 6 / 65 kj/m² ISO 179/1eU Charpy notched impact strength, +23 C 13 / 17 kj/m² ISO 179/1eA Thermal properties dry / cond Unit Test Standard Melting temperature, 1 C/min 26 / * C ISO /-3 Temp. of deflection under load, 1.8 MPa 25 / * C ISO 75-1/-2 Temp. of deflection under load,.45 MPa 25 / * C ISO 75-1/-2 Coeff. of linear therm. expansion, parallel 3 / * E-6/K ISO /-2 Coeff. of linear therm. expansion, normal 7 / * E-6/K ISO /-2 urning ehav. at 1.5 mm nom. thickn. V- / * class IEC Thickness tested (1.5) 1.6 / * mm IEC ellow Card available es / * - - urning ehav. at thickness h V- / * class IEC Thickness tested (h).8 / * mm IEC ellow Card available es / * - - urning ehav. 5V at thickness h 5VA / * class IEC Thickness tested 3. / * mm IEC ellow Card available es / * - - Oxygen index 27 / * % ISO /-2 Electrical properties dry / cond Unit Test Standard Relative permittivity, 1MHz 3.7 / 5 - IEC 625 Dissipation factor, 1MHz 2 / 1 E-4 IEC 625 Volume resistivity 1E13 / 1E1 Ohm*m IEC 693 Surface resistivity * / 1E1 Ohm IEC 693 Electric strength 33 / 3 kv/mm IEC Comparative tracking index - / 55 - IEC 6112 Other properties dry / cond Unit Test Standard Water absorption 6 / * % Sim. to ISO 62 Humidity absorption 1.4 / * % Sim. to ISO 62 Density 134 / - kg/m³ ISO 1183 Page: 1/8
2 Material specific properties dry / cond Unit Test Standard Viscosity number 14 / * cm³/g ISO 37, 1157, 1628 Rheological calculation properties Value Unit Test Standard Ejection temperature 195 C - Test specimen production Value Unit Test Standard Injection Molding, melt temperature 29 C ISO 294 Injection Molding, mold temperature 8 C ISO 1724 Injection Molding, injection velocity 2 mm/s ISO 294 Diagrams Viscosity-shear rate Shearstress-shear rate Viscosity-shear rate Ultramid A3X2G5 Shearstress-shear rate Ultramid A3X2G5 28 C 29 C 3 C 1E6 28 C 29 C 3 C Viscosity in Pa s 1E2 Shearstress in Pa 1E5 1E4 1E1 1E 1E1 1E2 1E4 1E5 1E 1E1 1E2 1E4 1E5 Shear rate in 1/s Shear rate in 1/s Dynamic Shear modulus-temperature Stress-strain Dynamic Shear modulus-temperature Stress-strain Shear modulus in MPa 1E C -2 C C 23 C 4 C 6 C 8 C 12 C 16 C - reak 1E Temperature in C Page: 2/8
3 Stress-strain Secant modulus-strain Stress-strain Secant modulus-strain C 4 C 6 C 8 C - ield Secant modulus in MPa C -2 C C 23 C 4 C 6 C 8 C 12 C 16 C - reak Secant modulus-strain Stress-strain (isochronous) 23 C Secant modulus-strain Stress-strain (isochronous) 23 C Secant modulus in MPa C 4 C 6 C 8 C - ield h 1 h 1 h 1 h 1 h Page: 3/8
4 Creep modulus-time 23 C Stress-strain (isochronous) 6 C Creep modulus-time 23 C Stress-strain (isochronous) 6 C Creep modulus in MPa MPa 2 MPa 3 MPa 4 MPa 5 MPa 56 MPa h 1 h 1 h 1 h 1 h 15 1E1 1E2 1E4 1E5 Time in h Creep modulus-time 6 C Stress-strain (isochronous) 9 C Creep modulus-time 6 C Stress-strain (isochronous) 9 C Creep modulus in MPa MPa 2 MPa 3 MPa 4 MPa 48 MPa h 1 h 1 h 1 h 1 h 14 1E1 1E2 1E4 1E5 Time in h Page: 4/8
5 Creep modulus-time 9 C Stress-strain (isochronous) 12 C Creep modulus-time 9 C Stress-strain (isochronous) 12 C Creep modulus in MPa E1 1E2 1E4 1E5 5 MPa 1 MPa 15 MPa 2 MPa 25 MPa 3 MPa 35 MPa 4 MPa h 1 h 1 h 1 h 1 h Time in h Creep modulus-time 12 C Specific volume-temperature (pvt) Creep modulus-time 12 C Specific volume-temperature (pvt) Ultramid A3X2G5 Creep modulus in MPa MPa 1 MPa 15 MPa 2 MPa 25 MPa 3 MPa 35 MPa 36 MPa Spec. volume in E-3 m³/kg MPa 4 MPa 8 MPa 12 MPa 16 MPa 2 MPa 1 1E1 1E2 1E4 1E Time in h Temperature in C Page: 5/8
6 Tensile modulus-temperature Tensile modulus-temperature Tensile modulus-temperature Tensile modulus-temperature 1E4 1E4 Tensile modulus in MPa Tensile modulus in MPa Temperature in C Temperature in C Characteristics Processing Injection Molding Delivery form Pellets Additives Release agent Special Characteristics Heat stabilized or stable to heat Regional Availability North America, Europe, Asia Pacific, South and Central America, Near East/Africa Other text information Injection molding PREPROCESSING Pre/Post-processing, max. allowed water content:.15 % Pre/Post-processing, Pre-drying, Temperature: 8-1 C Pre/Post-processing, Pre-drying, Time: 4 h PROCESSING injection molding, Melt temperature, range: 28-3 C injection molding, Melt temperature, recommended: 29 C injection molding, Mold temperature, range: 6-9 C injection molding, Mold temperature, recommended: 8 C injection molding, Dwell time, thermoplastics: 1 min Chemical Media Resistance Acids Acetic Acid (5% by mass) (23 C) Citric Acid solution (1% by mass) (23 C) Lactic Acid (1% by mass) (23 C) Hydrochloric Acid (36% by mass) (23 C) Nitric Acid (4% by mass) (23 C) Sulfuric Acid (38% by mass) (23 C) Sulfuric Acid (5% by mass) (23 C) Chromic Acid solution (4% by mass) (23 C) Page: 6/8
7 ases Sodium Hydroxide solution (35% by mass) (23 C) Sodium Hydroxide solution (1% by mass) (23 C) Alcohols Isopropyl alcohol (23 C) Methanol (23 C) Ethanol (23 C) Hydrocarbons n-hexane (23 C) Toluene (23 C) iso-octane (23 C) Ketones Acetone (23 C) Ethers Diethyl ether (23 C) Mineral oils Standard Fuels Salt solutions Other SAE 1W4 multigrade motor oil (23 C) SAE 1W4 multigrade motor oil (13 C) Diesel fuel (pref. ISO 1817 Liquid F) (23 C) Diesel fuel (pref. ISO 1817 Liquid F) (>9 C) Sodium Chloride solution (1% by mass) (23 C) Sodium Hypochlorite solution (1% by mass) (23 C) Zinc Chloride solution (5% by mass) (23 C) Ethyl Acetate (23 C) Hydrogen peroxide (23 C) DOT No. 4 rake fluid (13 C) Ethylene Glycol (5% by mass) in water (18 C) Water (23 C) The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. NO WARRANTIES OF AN KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTAILIT OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR INFORMATION MA E USED WITHOUT INFRINGING THEINTELLECTUAL PROPERT RIGHTS OF OTHERS. Page: 7/8
8 In order to check the availability of products please contact us or our sales agency. For more information about our products contact your local representative or SE Dept. PM/K Fax: CAMPUS is a registered trademark of CWFG (Chemie Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt) Page: 8/8
CAMPUS Datasheet. Ultramid B3EG3 - PA6-GF15 BASF
CAMPUS Datasheet Ultramid B3EG3 - PA6-GF15 Product Texts Glass fibre reinforced injection moulding grade for housings (e.g: automotive mirror housings). Also used for wheels of mountain bikes. Rheological
More informationGrilon TSG-30/4 EMS-GRIVORY a unit of EMS-CHEMIE AG
Product Texts Product designation according to ISO 1874: PA 66+PA 6, MHR, 14-100 N, GF30 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 9700 / 6000 MPa ISO 527-1/-2 Stress at break
More informationDuPont Zytel 70G43L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 70G43L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationGrilamid TR 55 LY EMS-GRIVORY a unit of EMS-CHEMIE AG
Product Texts Product designation according to ISO 1874: PA 12/MACMI + PA 12, GHLT, 14-020 Mechanical properties dry / cond Unit Test Standard Tensile Modulus - / 1900 MPa ISO 527-1/-2 Yield stress - /
More informationUltrason E 3010 NAT. Created: Source: Copyright M-Base Engineering+Software GmbH.
Unreinforced, higher viscosity injection moulding and extrusion grade, tougher and with improved chemical resistance. Abbreviated designation according to ISO 143-1: Processing/Physical Characteristics
More informationDuPont Minlon 10B40 NC010
DuPont Minlon 1040 NC010 Product Information PRODUCT INFORMATION Common features of Minlon nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of
More informationDuPont Delrin 100P NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationGrilamid TR 55 EMS-GRIVORY a unit of EMS-CHEMIE AG
Product Texts Product designation according to ISO 1874: PA 12/MACMI, GT, 11-020 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 2200 / 2200 MPa ISO 527-1/-2 Yield stress 75 / 75 MPa
More informationDuPont Zytel 70G35HSLRA4 BK267
DuPont Zytel 70G35HSLRA4 K267 Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance
More informationDuPont Zytel 408 NC010A
NLON RESIN PRODUCT INFORMATION Product Information Zytel 408 NC010A is an Unreinforced, Medium Toughened, Polyamide 66 General information Value Unit Test Standard Resin Identification PA66-I - ISO 1043
More informationDuPont Delrin 100 NC010
PRODUCT INFORMATION Product Information Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Zytel 103HSL NC010
NLON RESIN Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness,
More informationDuPont Delrin 100 BK602
PRODUCT INFORMATION Product Information Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Zytel 70G33L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Minlon 73M40 NC010
MINERAL REINFORCED NLON RESIN Product Information PRODUCT INFORMATION Common features of Minlon nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance
More informationDuPont Zytel 70G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 73G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 103FHS NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 73G45 BK263
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Crastin S600F10 NC010
Product Information PRODUCT INFORMATION Common features of Crastin thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and
More informationDuPont Delrin 500CL NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Delrin 100AL NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Hytrel 3078 THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationDuPont Delrin 500AL NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Zytel 73G15HSL BK363
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Delrin 500P BK602
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Zytel 103HSL NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Minlon IG38C1 BK434
Product Information PRODUCT INFORMATION Common features of Minlon nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good
More informationDuPont Zytel 8018HS NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Delrin 150 NC010
PRODUCT INFORMATION Product Information Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Hytrel 4069 THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationDuPont Hytrel DYM350BK
THERMOPLASTIC POLESTER ELASTOMER Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness
More informationDuPont Zytel 70G30HSLR NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 101L NC010
PRODUCT INFORMATION Product Information Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Hytrel 4068FG (Preliminary Data)
PRODUCT INFORMATION DuPont Hytrel 4068FG (Preliminary Data) Product Information Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional
More informationDuPont Hytrel 7246 THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationDuPont Zytel 70G33HS1L BK031
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 70G30HSLR BK099
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 101F NC010
PRODUCT INFORMATION Product Information Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Zytel 73G30HSL BK261
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More informationDuPont Hytrel HTR4275 BK316
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationDuPont Hytrel G4774 THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationDuPont Rynite 530 NC010
PRODUCT INFORMATION Product Information Common features of Rynite thermoplastic polyester include mechanical and physical properties such as excellent balance of strength and stiffness, dimensional stability,
More informationDuPont Hytrel 5555HS THERMOPLASTIC POLYESTER ELASTOMER PRODUCT INFORMATION. Product Information
Product Information PRODUCT INFORMATION Common features of Hytrel thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance
More informationDuPont Rynite 545 NC010 (Preliminary Data)
PRODUCT INFORMATION DuPont Rynite 545 NC010 (Preliminary Data) Product Information Common features of Rynite thermoplastic polyester include mechanical and physical properties such as excellent balance
More informationDuPont Delrin 100ST NC010
Product Information PRODUCT INFORMATION Common features of Delrin acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance,
More informationDuPont Zytel HTN51G50HSL BK083 (Preliminary Data)
PRODUCT INFORMATION DuPont Zytel HTN51G50HSL K083 (Preliminary Product Information Zytel HTN high performance polyamide resins feature high retention of properties upon exposure to elevated temperature,
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationHOSTAFORM C /9005 POM Unfilled
Description Hostaform C 9021 10/9005 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform C 9021 10/9005 can be laser marked
More informationHOSTAFORM C 9021 GV1/30 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF26 POM copolymer Injection molding type, reinforced with ca 26 % glass fibers; high resistance
More informationHOSTAFORM C 9021 GV1/10 POM Glass Reinforced
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 02-003, GF10 POM copolymer Injection molding type, reinforced with ca. 10 % glass fibers; high resistance
More informationGrilamid LBV-50H FWA black 9225 EMS-GRIVORY a unit of EMS-CHEMIE AG
Grilamid LBV-50H FWA black 9225 PA12-GF50 Product Texts Product designation according to ISO 1874: PA12, MH, 18-120, GF50 Mechanical properties dry / cond Unit Test Standard Tensile Modulus 13500 / 12500
More informationA3X2G7. Product Information Ultramid 07/2015 PA66-GF35 FR. BASF SE Ludwigshafen, Germany
Product Information Ultramid A3X2G7 07/2015 PA66-GF35 FR Product description A glass fibre reinforced injection moulding grade with improved flame retardance. Flame retardant based on red phosphorus; giving
More informationCELANEX PBT Unfilled
Description Celanex 2000-2 is a general purpose, unreinforced polybutylene terephalate with a good balance of mechanical properties and processability. Celanex 2000-2 is a high flow material that contains
More informationProperty Test Condition Unit Standard typical Value -
Grades / Medical devices MVR (300 C/1.2 kg) 14 cm³/10 min; medical devices; suitable for ETO and steam sterilization at 121 C; biocompatible according to many ISO 10993-1 test requirements; medium viscosity;
More informationHOSTAFORM C 9021 XAP POM Unfilled
Description POM copolymer Product with reduced emissions especially for automotive interior application. Good properties of the standard-injection molding grades like high rigidity, hardness and toughness;
More informationProperty Test Condition Unit Standard typical Value -
Makrolon 8325 Glass fiber (Normal fiber) reinforced grades / 20 % Glass fibermvr (300 C/1.2 kg) 4.0 cm³/10 min; 20 % glass fiber reinforced; high viscosity; easy release; injection reinforced molding -
More informationVANDAR 2100 PBT Unfilled
Description Vandar 2100 is a polyester alloy designed to offer maximum impact strength at room and low temperatures. This unfilled compound is characterized by outstanding chemical resistance, dimensional
More informationHOSTAFORM C 9021 SW POM Tribological
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 02-002, K10 POM copolymer Injection molding type, special modified with anti-friction additives for
More informationHOSTAFORM C 9021 POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness;
More informationFORTRON 1140L4 PPS Glass Reinforced
Description Fortron 1140L4 is a 40% glass-reinforced grade that is the strongest and toughest product available. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently
More informationVECTRA A150 LCP Glass Reinforced
Description Improved creep resistance over A130. May reduce warpage in some parts compared to A130. 50% glass reinforced. Chemical abbreviation according to ISO 1043-1 : LCP Inherently flame retardant
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 04-002 POM copolymer Easy flowing Injection molding type like C 13021, but with higher strength,
More informationCELANEX 1600A PBT Unfilled
Description Celanex 1600A is a high molecular weight grade of unreinforced polybutylene terephthalate used in both extrusion and injection molding applications. Physical properties Value Unit Test Standard
More informationVECTRA MT1310 LCP Medical Technology
Description The Standard for the Industry. Excellent balance of properties, including easy flow, easy processing, thermal stability, chemical resistance, mechanical and electrical properties. Suitable
More informationFORTRON 6165A6 PPS Mineral / Glass Reinforced
Description Fortron 6165A6 is an easier flow version of Fortron 6165A4. It offers similar characteristics to the 6165A4. Applications include electronic components (i.e. lamps housings and sockets) and
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 06-002 POM copolymer Extremly easy flowing Injection molding type for very thin-walled precision
More informationBourns Sensors & Controls Division Announces Model 39 Material Change
SENSORS & CONTROLS PRODUCTS May, 2006 Bourns Manufacturers Representatives Corporate Distributor Product Managers Americas Sales Team Asia Sales Team Europe Sales Team Bourns Internal Bourns Plant Managers
More informationHOSTAFORM C POM Unfilled
Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 05-002 POM copolymer Very easy flowing Injection molding type with high rigidity and hardness; good
More informationProperty Test Condition Unit Standard typical Value -
Makrolon 6557 Flame retardant grades / Medium viscosity ISO Shortname MVR (300 C/1.2 kg) 10 cm³/10 min; flame retardant; UL 94V-0/3.0 mm; medium viscosity; UV stabilized; easy release; injection molding
More informationProperty Test Condition Unit Standard typical Value -
Makrolon 2805 General purpose grades / Medium viscosity ISO Shortname MVR (300 C/1.2 kg) 9.0 cm³/10 min; general purpose; medium viscosity; easy release; injection molding - melt temperature 280-320 C;
More informationVECTRA A430 LCP Specialty
Description Provides many of the characteristics of A130 with added lubricity. Suitable for applications requiring excellent wear characteristics. Excellent electrical properties at high frequencies. LCP/PTFE
More informationA3XZG5. Product Information Ultramid 11/2017 PA66-I GF25 FR(52) BASF SE Ludwigshafen, Germany
Product Information Ultramid A3XZG5 11/2017 PA66-I GF25 FR(52) Product description An impact-modified, glass fibre reinforced injection moulding grade with improved flame retardance based on red phosphorus;
More informationGUR 4120 PE-UHMW Unfilled
Description GUR 4120 UHMW-PE is a linear polyolefin resin in powder form with a molecular weight of approximately 5.0 MM g.mol calculated using Margolies equation. The extremely high molecular weight of
More informationDuPont Delrin. Delrin 111P NC010. Product Information. acetal resin. plastics.dupont.com
DuPont Delrin acetal resin Delrin 111P NC010 Delrin 111P is a high viscosity acetal homopolymer with improved thermal stability and modifications for more precise moulding (reduced warpage, fewer voids).
More informationUltramid Balance Specialty plastics based on PA 610
Balance Balance Specialty plastics based on PA 610 BASF supplies polyamide 610 for processing by injection molding under the trade name Balance which is produced by polycondensation of hexamethylene diamine
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationCELCON M25 POM Unfilled
Description Celcon acetal copolymer grade M25 is a high molecular weight, higher toughness and impact resistance grade primarily used for extrusion and selected injection molding applications. Physical
More informationMATERIAL DATA SHEET TECHLITE WHITE ACOUSTICAL FOAM
TECHLITE White Acoustical Foam is an open-cell foam made of melamine resin. TECHLITE is manufactured in the form of untrimmed blocks with a thin outer skin. The standard dimensions of the blocks are 2500
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationVALOX Resin 451E Europe-Africa-Middle East: COMMERCIAL
VALOX 451E is 20% glass reinforced, flame retardant PBT injection moulding resin. MECHANICAL Tensile Stress, yld, Type I, 5 mm/min 110 MPa ASTM D 638 Tensile Stress, brk, Type I, 5 mm/min 110 MPa ASTM
More informationTECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationDuPont Hytrel. Hytrel Product Information. thermoplastic polyester elastomer. plastics.dupont.com
DuPont Hytrel thermoplastic polyester elastomer is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing
More informationCommercial: Active Africa & Middle East Asia Pacific Glass Fiber, 50% Filler by Weight Flame Retardant. Physical Typical Value Unit Test method
Technical Data Sheet Ixef 1521 Ixef 1521 is a 50% glass-fiber reinforced, flame retardant which exhibits high strength and stiffness, outstanding surface gloss, and excellent creep resistance. Custom Colorable
More informationUltrason E, S, P (PESU, PSU, PPSU) Product Range
Ultrason E, S, P (PESU, PSU, PPSU) Product Range Ultrason (PESU / PSU / PPSU ) Ultrason E Polyethersulfone ( PESU ) Ultrason S Polysulfone ( PSU ) Ultrason P Polyphenylsulfone ( PPSU ) Ultrason products
More informationOXYGEN STAYS OUT. QUALITY STAYS IN. ULTRADUR BARRIER OTR BELOW LIMIT OF QUANTITATION
OXYGEN STAYS OUT. QUALITY STAYS IN. ULTRADUR BARRIER 2 ULTRADUR BARRIER Only one layer, multiple advantages A NEW HIGH BARRIER MATERIAL FOR THIN WALL PACKAGING APPLICATIONS is a specialty PBT-compound.
More informationUltraform (POM) AT Product Range
Ultraform (POM) AT Product Range Ultraform AT (POM) Ultraform is the trade name for the range of thermoplastic polyoxymethylene copolymers from BASF. Products from the new plant in Korea are identified
More informationMakrolon. Product range Typical values
Makrolon Product range Typical values Makrolon Makrolon is the brand name of our polycarbonate, which we produce in all the major economic regions of the world. For Makrolon, the most important economic
More informationCommercial: Active Africa & Middle East Asia Pacific. RoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data Sheet AvaSpire AV-621 is an unreinforced (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621
More informationCommercial: Active Africa & Middle East Asia Pacific. RoHS Compliant Beige Pellets Extrusion Blow Molding Fiber (Spinning) Extrusion Film Extrusion
Technical Data Sheet AvaSpire AV-621 is an unreinforced (PAEK) that offers improved ductility and impact strength relative to PEEK while retaining most of the key performance attributes of PEEK. The AV-621
More informationFOR THE HIGHEST STANDARDS IN METAL REPLACEMENT
TEREZ GT3 GT3X FOR THE HIGHEST STANDARDS IN METAL REPLACEMENT www.terplastics.com www.tergroup.com TEREZ GT3 GT3X Unmatched in stiffness, strength and flowability The subject of metal replacement already
More informationCommercial: Active Africa & Middle East Asia Pacific Glass\Mineral, 65% Filler by Weight Heat Stabilizer
Technical Data Amodel AS-1566 HS polyphthalamide Amodel AS-1566 HS resin is a 65% glass and mineral reinforced polyphthalamide (PPA) resin that exhibits a high deflection temperature and high flexural
More informationPhysical Dry Conditioned Unit Test method
Technical Data Sheet Ixef 1022 is a 50% glass-fiber reinforced, general purpose compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance. General
More informationAKROMID RM The polyamide with reduced moisture absorption
AKROMID RM The polyamide with reduced moisture absorption AKRO-PLASTIC GmbH Member of the Feddersen Group AKROMID RM-M mechanical series (PA 6) Typical values for black color material at 23 C Test Specification
More informationLEXAN Resin LS2 Europe-Africa-Middle East: COMMERCIAL
LEXAN LS2 is a medium viscosity grade especially designed for applications with high optical requirements in terms of clarity and light transmission. MECHANICAL Taber Abrasion, CS-17, 1 kg 10 mg/1000cy
More informationTECHNYL A 218 V35 BLACK 21N
TECHNICAL DATA SHEET TECHNYL A 218 V35 Black 21N is a polyamide 66, reinforced with 35% of glass fibre, heat stabilized, for injection moulding. This grade offers an excellent combination between thermal
More information