AccuCell MATERIAL SAFETY DATA SHEET

Transcription

1 AccuCell MATERIAL SAFETY DATA SHEET (1) We would like to inform our customers that these batteries are exempt articles and are not subject to the 29 CFR OSHA requirement, or the Canadian WHMIS requirements, and the sheets are supplied as a service to you. (2) THESE BATTERIES ARE SUITABLE FOR DISPOL IN ORDIRY LANDFILLS 1.IDENTIFICATION PRODUCT ME: ACCUCELL BATTERIES ( Rechargeable Alkaline Battery ) SIZE: AC750 MICRO/AAA/LR03 and AC1800 MIGNON/AA/LR6 EMERGENCY TELEPHONE NUMBER: +49 (0) FAX: +49 (0) EDITION DATE: May/25799 APPROVED BY: Mr. Ronald Mueller 2.INGREDIENTS INGREDIENT ME CAS# Range(Wt.%) *TLV & SOURCE(Unit) Manganese Dioxide ~35 0,2mg/M3 Steel ~ Zinc ~12 10mg/M3(as zinc oxide) Potassium Hydroxide ~9 2mg/M3 Graphite < 4 2mg/M3 Barium Sulfate < 2,2 10mg/M3 Silver(soluble, as Ag) < 0,15 0,01mg/M3 Water,paper,plastic,other Balance *ACGIH Threshold Limit Values for chemical Substances and Phisical Agents, PHISICAL DATA BOILING MM HG VAPOR PRESSURE (MM VAPOR DENSITY (AIR=1); DENSITY (GRAMS/CC) PERCENT VOLATILE VOLUME(%) EVAPORATION RATE(BUTYL ACETATE=1) PHYSICAL STATE; SOLUBILITY IN WATER(% BY WEIGHT) Ph; APPEARANCE AND ODOR Geometric solid object

2 4.FIRE & EXPLOSION HAZARD DATA FLASH POINT : LOWER(LEL): FLAMMABLE LIMITS IN AIR(%) : UPPER(UEL): EXTINGUISHING MEDIA : Use water, foam or dry powder, as appropriate. AUTO-IGNITION : SPECIAL FIRE FIGHTING PROCEDURES : As with any fire,wear self-contained breathing apparatus to avoid inhalation of hazardous decomposition products SPECIAL FIREEXPLOSION HAZARDS : Like any sealed container, battery cells may rupture when exposed to excessive heat; this could result in the flamable or corrosive materials. 5.HEALTH HARZARD DATA THRESHOLD LIMIT VALUE(TLY) AND SOURCE: EFFECTS OF OVEREXPOSURE: None EMERGENCY FIRST AID PROCEDURES Skin and Eyes : In the event that battery ruptures, flush with copious quantities of water. Get immediate medical attention for eyes. Wash skin with soap and water. Swallowing : Ingestion of a battery can be harmful. 6.REACTIVITY DATA STABLE OR UNSTABLE : Stable INCOMPATIBILITY(MATERIALS TO AVOID) : HAZARDOUS DECOMPOSITION PRODUCTS : HAZARDOUS POLYMERIZATION : May Occur Will not Occur: X. CONDITION TO AVOID : Avoid Electrical Shorting

3 7.SPILL OR LEAK PROCEDURES PROCEDURE TO CONTAIN AND CLEAN UP LEAKS OR SPILLS: In the event of a battery rupture, collect all released material in a plastic lined metal container. REPORTING PEOCEDURE : Report all spills in accordance with Federal, State and Local reporting requirements. WASTE DISPOSAL METHOD : Whenshredded per Toxicity characteristics Leachate Procedure(TCLP) Parameters and tested per SW rd Edition, Test Methods for Evaluating Solid Waste, independent certified laboratory analyses have indicatet these RAM Battery types to have no hazardous waste characteristics(per 40CFR, Part ) and can be land-filled if all other Federal, State and Local regulations are complied with. 8.PROTECTION INFORMATON RESPIRATORY PROTECTION (SPECIFY TYPE) VENTILATION: Local Exhaust : Mechanical(General) Special : Other: PROTECTIVE GLOVES : EYE PROTECTION : OTHER PROTECTIVE CLOTHING 9.SPECIAL PRECAUTIONS HANDLING AND STORAGE: Store in a dry place. Storing unpacked cells together could result in cell shorting and heat build-up. TRANSPORTATION-SHIPPING : These are Battery, dry and are not considered to be a hazardous material per U.S. DOT (Dept. Of Transportation Reglations) or a dangerous goods per LATA(International Air Transportation Association Regulations). Notice : The information and recommendations set forth are made on good faith and are believed to be accurate at the data of preparation.

4 1/2 Enviromental Requirements Declaration Subject: AccuCell Enviromental Requirements for RoHS and Lead-free Project We hereby agreed and committed to Enviromental Requirements. We agree to commit on a voluntary base, never to add any of the following hazardous substances to parts, materials and specified products as well as to respect the ban and Maximum thresholds set for all hazardous Substances described. Total Banned Used in AccuCell Products Heavy Metals: (This item must be provide the test report) a. requirements for Cadmium content: 1. Inside PVC insulation and any entire plastic materials or element of parts is currently limited to 5ppm. 2. Inside all others non-plastic-materials should less than 950ppm inside any homogeneous material (RoHS definition 1000ppm) Cadmium (Cd): test method EN 1122, SGS Lab b. requirements for Lead content: 1. Inside PVC insulation and any entire plastic material of parts is currently limited to 90ppm. 2. Inside all others non-plastic materials should less than 950ppm inside any homogeneous material (RoHS definition 1000ppm). Lead (Pb): test method EPA 3050B, SGS Labb or SEL Lab c. requirement for Mercury content below 950ppm (RoHS defintion 1000ppm) Mercury (Hg): test method EPA 3052, SGS Lab d. requirement for Chromium VI content below 950ppm (RoHS definition 1000 ppm). Chromium VI (Cr6+): test method EPA 3060A, SGS Lab e. Four heavy metals (Cd / Pb / Hg / Cr6+) the sum and individual content should less than 100ppm in package material. (94 / 62 / EEC) 2. Chlorinated Organic Compounds: PCBs and PCTs Category Polychlorinated Naphthalene Category (PCN) Chlorinated paraffin (specific)

5 2/2 Total Banned Used in AccuCell Products Brominated Organic Compounds: (This item must be provide the test report) PBB and PBDE content below 950ppm (RoHS definition 1000ppm) PPB and PBDE: test method 83 / 264 / EEC 2. Others Substances & Compounds: Aliphatic CHCs Asbestos. Azo Compounds. ODS Substances CFCs and Halons. Formaldehyde Ploy Vinyl Chloride Organic Tin Compounds (Tributyltin compound and Triphenyltin compound ) AccuCell Deutschland Ronald Müller, President AccuCell