Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
|
|
- Adam Copeland
- 6 years ago
- Views:
Transcription
1 Schedule of ccreditation United Kingdom ccreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom Contact: Mr Richard Smith Tel: +44 (0) Fax: +44 (0) Website: s covered by the organisation and their relevant activities Laboratory locations: details ctivity code ddress Western Way Wednesbury WS10 7G Local contact Mr Richard Smith Testing Chemical tests Corrosion tests Mechanical tests Metallurgical tests Weldment Tests ddress Linley Lodge Laboratory Westgate ldridge Walsall WS9 8DG Local contact Mr Richard Smith Testing Corrosion tests Mechanical tests Metallurgical tests Weldment Tests ssessment Manager: C3 Page 1 of 9
2 Schedule of ccreditation United Kingdom ccreditation Service ccredited to DETIL OF CCREDITTION METLS, LLOYS and METL PRODUCTS Chemical Tests luminium alloys Elemental analysis Si, Fe, Mn, Cu, Mg, Zn, Cr, Pb, Sn, Ti RP101 using spark source Optical Emission Spectroscopy luminium alloys (Wrought) Si, Fe, Cu, Mn, Mg, Cr, Ni, Zn, Ti, Pb, Sn, Zr, V, Ga, i s RP 116 & 117 using ICP-OES Stainless steels Mn, Si, P, Cu, Ni, Cr, Mo, V, Ti, l Nb Steels Mn, Si, P, Cu, Ni, Cr, Mo, V, Ti, l, Nb, s RP 116 & 117 using ICP-OES Documented In0House s RP 116 & 117 using ICP-OES Plain carbon, low alloy, stainless and tool steels, and cast iron Elemental analysis C, Mn, Si, S, P, Cu, Ni, Cr, Mo, Sn, Nb, V, l, Ti,, Zr, Pb, W, Co, Mg RP101 using Optical Emission Spectroscopy Determination of Carbon and Sulphur RP138 Cast iron, copper alloys, ferro alloys, high alloyed steels, low alloyed steels, nickel and cobalt alloys, plain carbon steels and refractories Qualitative and Semi- Quantitative analysis of elements above atomic No.5 RP362 using Energy Dispersive Spectroscopy High alloyed steels, low alloyed steels, nickel and cobalt alloys, plain carbon steels. Determination of Nitrogen RP136 ssessment Manager: C3 Page 2 of 9
3 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont d) Corrosion Tests ustenitic stainless steels Susceptibility to intergranular corrosion S EN ISO :1998 STM Practice C and E STM G48-11 ustenitic stainless steels Susceptibility to intergranular corrosion STM Practice C and E STM G48-11 Wrought nickel rich chromium bearing alloys Susceptibility to intergranular corrosion STM G28-02(08) Mechanical Tests end S EN ISO 7438:2005, Hardness: rinell (5/750, 10/3000) S EN ISO :2014 STM E10:14 Rockwell Scales &C S EN ISO :2005 Rockwell Scales & C STM E18-14 Vickers HV10, 30 and 100 S EN ISO :2005 Vickers HV10 and 30 S EN ISO :2005 STM E384-11e1 ssessment Manager: C3 Page 3 of 9
4 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont d) Mechanical Tests Low Force Vickers HV0.3, 0.5 and 1 S EN ISO :2005, Micro Hardness HV 0.05 and 0.10 STM E384-11e1 Micro Hardness HV 0.3, 0.5 and 1.0 STM E384-11e1 Impact: Izod S 131:Part 1:1961(2007) Charpy (V- and U- notches) (-196 C and -120 C to ambient) Charpy (V- and U- notches) (-196 C and -120 C to ambient) S EN ISO 148-1:2010 STM E23-12c S EN ISO 148-1:2010 STM E23-12c STM 923:2014 Crystallinity S 131:Part 5:1965(1990) Tensile Tensile (mbient temperature, forces from 2 kn to 500 kn) Tensile (mbient temperature, forces from 2 kn to 500 kn) S EN ISO :2009 & STM E8/8M-13a STM STM STM 557M-10 S EN ISO :2009 & STM E8/8M-13a STM STM ssessment Manager: C3 Page 4 of 9
5 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont d) Mechanical Tests (cont d) Tensile (temperatures from ambient to 600 C, forces from 2 kn to 500 kn) S EN ISO :2011 STM E21-09 Pipes and tubes Crush, and Flatteningand Expanding S EN ISO 8492:2013 S EN ISO 8493:2004 S EN ISO 8495:2013 S 6323:Part 1:1982(1990) (Superseded) STM Proof Load and Tension S 4395:Part 1:1969 S 4395:Part 2:1969 S EN ISO :2009 S EN ISO :2009 S EN ISO 898-1:2013 S EN ISO 898-2:1992 S EN ISO 898-6:1996 STM F STM F606M-13a STM F738-02(2008) STM METLS, LLOYS and METL PRODUCTS (cont d) Fasteners(including bolts, screws, studs and nuts) Metallurgical Tests ustenite spacing DNV-RP- F112 October 2008 Case depth S 6286:1982(2005)/ISO 4970:1979 S EN ISO 2639:2002 S EN 10328:2005 ssessment Manager: C3 Page 5 of 9
6 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont d) Fasteners(including bolts, screws, studs and nuts) Metallurgical Tests S EN ISO 3887:2003 Partial decarburization depth S EN ISO 898-1:2009 Detrimental intermetallic phases STM 923:2014, Dezincification S EN ISO 6509:1995 S 2345:2006 Grain size (Comparison) S EN ISO 643:2012 STM E112-13( ) Grain size (Comparison) STM E112-13( ) Graphite evaluation STM S EN ISO 945:2008 Inclusion content ( only) Macrostructure Fractographic and microscopical examination ISO 4967:2013ED3 STM E45-13 STM E381-01(2012) STM 604/604M- 07(2012) RP 361 Volume fraction S 7590:1992 STM E Volume fraction STM E ssessment Manager: C3 Page 6 of 9
7 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont d) Metallurgical Tests (cont d) Fractographic and microscopical examination RP 361 Volume fraction S 7590:1992 STM E Volume fraction STM E Weldments and razing Tests designated in specified Welding s as detailed below:- end, Fracture, Hardness, Impact, Tensile, Visual examination, Macro examination S EN 287:Part 1:2011 S EN ISO :2004 S EN ISO :2004+2:2012 S EN ISO :2005 S EN ISO 9016:2012 S EN ISO 5178:2011 S EN ISO4136:2012 S EN ISO 5173:2010+1:2011 S EN ISO 17637:2011 S EN ISO :2011 S EN ISO :2011 S EN ISO 9017:2013 S EN ISO 17639:2013 S EN ISO :2002 S EN ISO :2002 S 1140:1993 S 4871:Part 3:1985 S 4872:Part 1:1982 S 4872:Part 2:1976 S EN ISO 15620:2000 SME 1X:2013, ssessment Manager: C3 Page 7 of 9
8 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS, LLOYS and METL PRODUCTS (cont d) Weldments and razing (cont d) Tests designated in specified Welding s as detailed below:- T/SP/P1-Feb 02 T/SP/P2-Sept 03 GC/PS Part P5:1976 GC/PS Part P8:1975 T/SP/P9- pril 03 DGQ V.P84 D CR 8-10 S EN ISO 15613:2004 S EN 288-9:1999 S EN ISO 9018:2003, METLLIC COTINGS Corrosion Tests Neutral salt spray STM S EN ISO 9277:2012 Metallurgical Tests Plating/coating thickness S EN ISO 1463:2004 S EN 12540:2000 Coating mass S EN 10346:2009 S EN 10152:2009 S EN 12329:2000 Chemical Test Chromate treated surfaces Presence of hexavalent chromium Documented In-house RP110 ssessment Manager: C3 Page 8 of 9
9 Schedule of ccreditation United Kingdom ccreditation Service ccredited to PINT and VRNISHES Environmental Tests Resistance to dry heat Immersion Salt spray resistance Resistance to Humidity (continuous condensation) (cyclic condensation) S U 148 Part 9:1969(1990) s based on customer specifications S U 148 Part 13:1969(1990) s based on customer specifications S U 148 Part 2:1969(1990) STM S EN ISO :2001 Mechanical Tests dhesion S EN ISO 2409:2007 Ford FLTM I Hardness S U 148 Part 6:1969(1990) Clause 3 Pencil method Ford EU-I 51-1 PLSTIC COTINGS Corrosion Tests Salt spray resistance STM END ssessment Manager: C3 Page 9 of 9
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Element Materials Technology Sheffield Ltd, Trading as Element ccredited to 3
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr G Tomlinson Tel: +44 (0)1332 275700 Fax: +44 (0)1332 275729 E-Mail: graham.tomlinson@ndtservices.co.uk Website: www.ndtservices.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr ndy Harrison Tel: +44 (0)1332 275700 E-Mail: andy.harrison@intertek.com Website: www.ndtservices.co.uk Laboratory locations: below
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Speciality Steels Limited 7 Fox Valley Way Stocksbridge Sheffield
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Hareness Circle Industrial Estate Aberdeen Scotland AB12 3LY Contact: Mrs D McAdam Tel: +44 (0)1224-890020 Fax: +44 (0)1224-890220 E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Eden House Watling Street Industrial Estate Leadgate Consett County Durham DH8 6TA Contact: Mr R L Hannant Tel: +44 (0)1207 599260 Fax: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Porterfield Road Renfrew Scotland P4 8DJ Contact:
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11325-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 23.01.2017 to 22.01.2022 Holder of certificate: INDUSTRIE-LABOR
More informationAccurate Laboratory Services, Plot No. 71/1-B7, General Block, MIDC Bhosari, Bhosari-Pimpri Road, Pune, Maharashtra
Last Amended on 21.07.2015 Page 1 of 8 I. MECHANICAL PROPERTIES OF MATERIALS 1. Ferrous & Non and Alloys Brinell Hardness IS 1500: 2013 ISO 6506-1: 2014 ASTM E 10: 2014 Rockwell Hardness IS 1586 Part 1:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: December 31, 2017 Certificate Number: 2633.01 In recognition of
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 CHEMICAL Valid To: November 30, 2017 Certificate Number: 2633.02 In recognition of the
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY HOUSTON REGAL ROW 1 9925 Regal Row Houston, TX 77040 Richard Green Phone: 281 848 0270 MECHANICAL Valid To: January 31, 2020 Certificate
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO ox 869 PC 130 zaiba Contact: Mr Robert McKenzie Tel: +968 24501870 Fax: +968 24595619 E-Mail: info.oman@element.com Website: www.element.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com CHEMICAL
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ssay Office and nchorcert nalytical (trading names of The Guardians of the Standard
More informationProfessional Testing Services Pte Ltd Certificate No. : LA G 32 Kian Teck Road Singapore Issue No. : 19 TESTS/ PROPERTIES
Professional Testing Services Pte Ltd Certificate No. : LA-1995-0088-G 32 Kian Teck Road Singapore 628779 Issue No. : 19 FIELD OF TESTING : Mechanical Testing Date : 05 January 2017 Page : 1 of 7 A. METALS
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: San Nicolás de los Garza, N.L. 66460 (Hereinafter
More informationSchedule. Type of Test/ Properties Measured/ Range of Measurement
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 9 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 81550 GELANG PATAH, JOHOR MALAYSIA This laboratory accredited
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More informationSchedule. This laboratory has demonstrated its technical competence to operate in accordance with MS ISO/IEC 17025:2005 (ISO/IEC 17025:2005).
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 11 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 79200 ISKANDAR PUTERI, JOHOR MALAYSIA FIELD OF TESTING:
More informationIPSCO Research & Development Center. Commercial Testing Capabilities
IPSCO Research & Development Center Commercial ing Capabilities A Wide Range of ing IPSCO s 70,000 square foot Research & Development Center combines the most advanced virtual and physical testing equipment
More informationRev. 02 SMT-625. AWS A5.14/ ASME SFA5.14 ERNiCrMo-3 JIS Z3334 YNiCrMo-3 EN ISO Ni 6625 (NiCr22Mo9Nb) HYUNDAI WELDING CO., LTD.
Rev. 02 AWS A5.14/ ASME SFA5.14 ERNiCrMo-3 JIS Z3334 YNiCrMo-3 EN ISO 18274 Ni 6625 (NiCr22Mo9Nb) HYUNDAI WELDING CO., LTD. 1/10 Specification AWS A5.14/ ASME SFA5.14 ERNiCrMo-3 JIS Z3334 YNiCrMo-3 EN
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4520 Willow Parkway Cleveland, OH 44125 Alexander Manuk Phone: 216 641 3290 CHEMICAL Valid To: May 31, 2019 Certificate Number: 0161.01 In recognition of the
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationAnalysis of Cast Iron Using Shimadzu PDA-7000
Analysis of Cast Iron Using Shimadzu PDA-7000 C112-0510M The analysis of low and high alloy cast iron by optical emission spectrometry is presented. Cast iron alloys are classified by their mechanical
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK A Division of Special Metals Contact: Mr P Scrimshire Wiggin Ltd Tel: +44 (0)1432-352230 Holmer Road Fax: +44 (0)1432-353545 Hereford E-Mail:
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut
More informationThe objective of this document is to specify the chemicals characteristics and properties of the material Steel AISI Carbon Steel.
STEEL AISI - 2 Steel AISI 2. Carbon Steel. Carbon C.8.23 Manganese Mn.3.6 Phosphorus P -.4 Max Sulfur S -.5 Max FM-DO-CO-2 3/3/27 STEEL AISI - 862 Steel AISI 862. Carbon Steel. Carbon C.7.23 Silicon Si
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18053-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 02.08.2018 to 26.07.2022 Holder of certificate: F
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TSP / USB LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TSP / USB LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2018 Certificate Number: 0929.01
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. WN GLOBAL LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WN GLOBAL LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 0929.01
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AADFW, INC. 1350 Westpark Way Euless, TX 76040 Phone: 817 540 0153 Billy Brown billy@aadfwinc.com Elise Schiltz elise@aadfwinc.com MECHANICAL Valid To: January
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationAnalysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000
C112-0514M Analysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000 Copper alloys are designated by their chemical composition with characteristic properties such as high corrosion resistance,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK R-TECH Services Ltd trading as R-TECH Materials Testing House Kenfig Industrial Estate Margam Port Talbot SA13 2PE Contact: Dr A Franks Tel:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. KPF 27327, 50, Chungjusandan 5-ro, Chungju-si, Chungcheongbuk-do, KOREA
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 KPF 27327, 50, Chungjusandan 5-ro, Chungju-si, Chungcheongbuk-do, KOREA Kwang Yang Kim Email: ky.kim@kpf.co.kr QM/Lab General Manger Youn O Choi Email: yochoi@kpf.co.kr
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance
More informationIssue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Midwest Testing Laboratories, Inc. 1072 Wheaton
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK Tata Steel UK Limited trading as Tata Steel Group Health Safety and ccredited
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationWestmoreland Mechanical Testing and Research, Inc. Materials Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: 221 Westmoreland Drive Youngstown, PA 15696 United States This certificate demonstrates conformance and recognition
More informationIssue February 2016 Valid to December ISO 9001 Registered Quality Management
Issue February 2016 Valid to December 2016 ISO 9001 Registered Quality Management 015 Index January 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 46
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MIAMI VALLEY MATERIALS TESTING CENTER, LLC 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: November 30, 2019 Certificate
More informationCERTIFIED REFERENCE MATERIALS (CRM)
CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical
More informationProperties of Valve Materials
Properties of Valve Materials ASTM NO. OTHER DESIGNATION AL MANGA- CARBON CHROME COBALT COPPER IRON LEAD NESE C Cr Co Cu Fe Pb Mn MOLYB- NESE Mo Commercial Aluminum 380 SC 84 A (Modified) UNS A38000 87.0.0.3
More informationIssue February 2018 Valid to December ISO 9001 Registered Quality Management
Issue February 2018 Valid to December 2018 ISO 9001 Registered Quality Management 015 Index February 2018 Page Index Inside front cover Introduction & Abbreviations. 3 Information - Definitions etc. 53
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. WN GLOBAL LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WN GLOBAL LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 0929.01
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Midwest Testing Laboratories, INC 1072 Wheaton Street, Troy, MI 48083 Cherie Ulatowski Phone: 248-689-9262 info@midwesttesting.com
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. WN GLOBAL LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WN GLOBAL LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 0929.01
More informationNew Advances using Handheld XRF Technology for the Prevention of Flow-Accelerated Corrosion (FAC)
New Advances using Handheld XRF Technology for the Prevention of Flow-Accelerated Corrosion (FAC) Joey Cheverie, Vice President Elemental Controls Ltd www.elementalcontrols.com 1 Agenda Flow-accelerated
More informationMetallurgical Properties Influencing Corrosion
Lecture 38 Metallurgical Properties Influencing Corrosion Keywords: Metallurgical Properties, Intergranular Corrosion, Hydrogen Embrittlement, Iron Pillar Metallurgical properties and structure influence
More informationTESTS / PROPERTIES. A.1.1 Carbon Steel 1. Density T-WI-CME Si & P ASTM E A.1.2 Stainless Steel 1. Density T-WI-CME
Singapore Test Services Pte Ltd Certificate No. : LA-1987-0002-A Chemical, Microbiological & Environmental Division 249 Jalan Boon Lay Singapore 619523 Issue No. : 24 FIELD OF TESTING : Chemical and Biological
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION Exova Canada Inc.
More informationCompany Profile. Metallurgical Consultancy and Services Sdn. Bhd. Contact Person : Dr. Lim Ching Liang, Director
Company Profile Metallurgical Consultancy and Services Sdn. Bhd. MS ISO/IEC 17025 TESTING SAMM No. 442 Contact Person : Dr. Lim Ching Liang, Director Contact Details: 20, Seksyen U5/17 (PS), Seksyen U5
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
ccredited to Laboratory locations: Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK 18 Halcyon Court St Margaret's Way Huntingdon PE29 6DG
More informationHigh performance application of modern bainitic steels
High performance application of modern bainitic steels Author : Paul Hill Date : 16 th May 2012 2012 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc and may not be copied
More informationNickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT ST. PAUL 662 Cromwell Avenue St. Paul, MN 55114-1776 Michele Gaabo Phone: 651 659 7521 Email: michele.gaabo@element.com MECHANICAL Valid To: December
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationInfluence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205
Influence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205 Arnulf Hörtnagl 1, Paul Gümpel 1, Michael Hamentgen², Beat Hofer³ Institute for Materials System Technology
More informationSafety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationChapter 7. Stainless Steels. /MS371/ Structure and Properties of Engineering Alloys
Chapter 7 Stainless Steels Stainless steels at least % Cr in iron is required (max 30% Cr) Cr: to make iron surface by forming a surface oxide film protecting the underlying metal from corrosion Ni: to
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA
ICS 77.140.01 H 40 GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA GB/T 221-2008 Replacing GB/T 221-2000 Notations for Designations of Iron and Steel GB/T 221-2008 How to BUY & immediately GET a
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationSpecification Alloyed quenched and tempered steel and. JED precipitation hardening steel 036M
Specification 2017-05 Class: Heat-treatable steel Class No.:11 Alloyed quenched and tempered steel and JED precipitation hardening steel 036M Previous Edition Part name (for databases) 1994-03 Alloyed
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
More informationDAHE STEEL STRUCTURE CO.,LTD.
DAHE ENTERPRISES LIMITED DAHE STEEL STRUCTURE CO.,LTD. FOREWORD FOREWORD Dahe Enterprises Ltd registers in Hong Kong. She owns two sole-investment companies Dahe Steel Structure (HK) Co., Ltd & Nanhai
More informationMaterial data sheet. EOS NickelAlloy HX. Description, application
EOS NickelAlloy HX EOS NickelAlloy HX is a heat and corrosion resistant metal alloy powder intended for processing on EOSINT M 280 systems. This document provides information and data for parts built using
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK shghal Centre for Research and Development ccredited to l Najma Street number
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to INOVYN ChlorVinyls nalytical Group Runcorn Cheshire W7 4JE Contact:
More informationMaterial data sheet. EOS NickelAlloy HX. Description, application
EOS NickelAlloy HX EOS NickelAlloy HX is a heat and corrosion resistant metal alloy powder intended for processing on EOS M systems. This document provides information and data for parts built using EOS
More informationSUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationATRONA Test Labs, Inc Zenith Parkway, Loves Park, IL Atif Ott Odeh Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid to: March 29, 2017 Certificate Number: AT-1119
More informationSTAINLESS STEEL DATASHEETS
STAINLESS STEEL DATASHEETS Alloys: 304 304L 310 316 316L 316LN 316Ti 316LVM 6Mo 21-6-9 22-13-5 904L Alloys 304 / 304L Alloys 304 / 304L (UNS S30400 / S30403) Alloys 304 (S30400) and 304L (S30403) stainless
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationResults are presented in Table 1. The tube was fabricated from a Type 347 and no unusual conditions were noted.
1. Introduction Hydroprocessing units such as isomax in oil refineries upgrade hydrocarbon feedstocks by converting heavier feeds into more valuable lighter products. The reactions occur under a hydrogen-rich
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATRONA Test Labs, Inc. 5271 Zenith Parkway, Loves Park, IL 61111 Atif Ott Odeh Phone: 815-229-8620 TESTING Valid
More informationStandard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
SA-268/SA-268M ASME BPVC.II.A-2015 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service 1. Scope 1.1 This specification covers a number of
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationRELIABLE PIPES & TUBES LTD.
RELIABLE PIPES & TUBES LTD. OHSAS 18001:2007 CERTIFIED ISO 9001:2008 CERTIFIED ISO 14001:2004 CERTIFIED PED CERT NO 01 202 IND/Q-11-0033 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel,
More informationChina NIL Research Center for Proficiency Testing. China NIL Proficiency Testing Schemes (2018)
China Research Center for Proficiency Testing China Proficiency Testing chemes () China Research Center for Proficiency Testing takes great pleasure in informing you that we provide some international
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CHUN YU WORKS & CO., LTD. QUALITY ASSURANCE DEPARTMENT TESTING LABORATORY 100, Ta-Pao St. Kangshan, Kaohsiung, 82063 Taiwan, R.O.C. Su Mien Chang Phone: +886
More informationIndustrial Development and Testing Laboratory, 40/107, Jay Bibi Road, Plot No. 18 & 20, Ghusuri, Howrah, West Bengal
Last Amended on - Page 1 of 6 I. MECHANICAL PROPERTIES OF MATERIAL 1. Ferrous & Non-Ferrous Metals & Alloys Tensile test Ultimate Tensile Strength Yield Stress/Proof Stress/E.U.L % Elongation % Reduction
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11278-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 12.05.2016 to 11.05.2021 Holder of certificate: Salzgitter
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
nnex to ISO/IEC 17025:2005 declaration Element Materials Technology msterdam B.V. Locations where activities are performed under accreditation Location bbreviation/ location code Element Materials Technology
More information